Preparation and Surface Property of Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomer/Talc Composite-Encapsulated Organic Compounds: Application for the Separation of Oil and Water

ACS Applied Materials and Interfaces

Volumn 7, Issue 25, 2015, Pages 13782-13793

  Oikawa, Yuri ^a   Saito, Tomoya ^a   Yamada, Satoshi ^b   Sugiya, Masashi ^b   Sawada, Hideo ^a  

^a HIROSAKI UNIVERSITY   (Japan)

^b Nippon Chemical Industrial Co   (Japan)

Author keywords

cross linked polystyrene particle; fluorinated oligomer; separation of oil water; silica; superamphiphobic characteristic; superhydrophilic superoleophobic characteristic; superhydrophobic superoleophilic characteristic; talc composite

Indexed keywords

CHROMATOGRAPHY; COLUMN CHROMATOGRAPHY; EMULSIFICATION; EMULSIONS; HYDROPHILICITY; HYDROPHOBICITY; MOLECULES; NANOCOMPOSITES; PHENOLS; POLYSTYRENES; SEPARATION; SILICA; SOL-GELS; SURFACE TREATMENT; TALC;

CROSS-LINKED POLYSTYRENE; FLUORINATED OLIGOMER; OIL/WATER; SUPER-HYDROPHILIC; SUPERAMPHIPHOBIC CHARACTERISTIC; SUPERHYDROPHOBIC;

OLIGOMERS;

EID: 84934779598     PISSN: 19448244     EISSN: 19448252     Source Type: Journal    
DOI: 10.1021/acsami.5b01588     Document Type: Article

References (55)

1. Rayner, J. H.; Brown, G. The Crystal Structure of Talc Clays Clay Miner. 1973, 21, 103-114
2. Whaling, A.; Bhardwaj, R.; Mohanty, A. K. Novel Talc-Filled Biodegradable Bacterial Polyester Composites Ind. Eng. Chem. Res. 2006, 45, 7497-7503
3. Ramos, M. A.; Matheu, J. P. V. Effect of Talc Surface Treatment on the Mechanical Properties of Composites based on PP/LDPE Blend Matrices Polym. Eng. Sci. 1991, 31, 245-252
4. Suh, C. H.; White, J. L. Talc-thermoplastic Compounds: Particle Orientation in Flow and Rheological Properties J. Non-Newtonian Fluid Mech. 1996, 62, 175-206
5. Mitsuda, T.; Taguchi, H. Formation of Mgnesium Silicate Hydrate and Its Crystallization to Talc Cem. Concr. Res. 1977, 7, 223-230
6. Douillard, J. M.; Salles, F.; Henry, M.; Malandrini, H.; Clauss, F. Surface Energy of Talc and Chlorite: Comparison between Electronegativity Calculation and Immersion Results J. Colloid Interface Sci. 2007, 305, 352-360
7. Hargarter, N.; Friedrich, K.; Catsman, P. Mechanical Properties of Glass Fiber/Talc/Polybutylene-terephthalate Composites as Processed by the Radlite Technique Compos. Sci. Technol. 1993, 46, 229-244
8. Clerc, L.; Feryy, L.; Leroy, E.; Lopez-Cuesta, J.-M. Influence of Talc Physical Properties on the Fire Retarding Behaviour of (Ethylene-Vinyl acetate Copolymer/Magnesium Hydroxide/Talc) Composites Polym. Degrad. Stab. 2005, 88, 504-511
9. Zhao, G.; Wang, T.; Wang, Q. Studies on Wettability, Mechanical, and Tribological Properties of the Polyurethane Composites Filled with Talc Appl. Surf. Sci. 2012, 258, 3557-3564
10. Huda, M. S.; Drzal, L. T.; Mohanty, A. K.; Misra, M. The Effect of Silane-Treated and -Untreated Talc on the Mechanical and Physico-mechanical Properties of Poly(lactic acid)/Newspaper Fibers/Talc Hybrid Composites Composites, Part B 2007, 38, 367-379
11. Huda, M. S.; Drzal, L. T.; Misra, M. A Study on Biocomposites From Recycled Newspaper Fiber and Poly(lactic acid) Ind. Eng. Chem. Res. 2005, 44, 5593-5601
12. Jain, S.; Reddy, M. M.; Mohanty, A. K.; Misra, M.; Ghosh, A. K. A New Biodegradable Flexible Composite Sheet From Poly(lactic acid)/Poly(ε-caprolactone) Blends and Micro-Talc Macromol. Mater. Eng. 2010, 295, 750-762
13. Leong, Y. W.; Baker, M. B. A.; Ishak, Z. A. M.; Ariffin, A.; Pukanszky, B. Comparison of the Mechanical Properties and Interfacial Interactions Between Talc, Kaolin, and Calcium Carbonate Filled Polipropylene Composites J. Appl. Polym. Sci. 2004, 91, 3315-3326
14. Unal, H. Morphology and Mechanical Properties of Composites Based on Polyamide 6 and Mineral Additives Mater. Des. 2004, 25, 483-487
15. Murthy, N. S.; Kotliar, A. M.; Sibilia, J. P.; Sacks, W. Structure and Properties of Talc-Filled Polyethylene and nylon 6 Films J. Appl. Polym. Sci. 1986, 31, 2569-2582
16. Garcia-Martinez, J. M.; Laguna, O.; Areso, S.; Collar, E. P. Polypropylene/Talc Composites Modified by A Succinyl-Fluorescein Grafted Atactic Polypropylene: A Thermal and Mechanical Study Under Dynamic Conditions J. Polym. Sci., Part B: Polym. Phys. 2002, 40, 1371-1382
17. Lapcik, L., Jr.; Jindrova, P.; Lapcikova, B.; Tamblyn, R. Effect of The Talc Filler Content on The Mechanical Properties of Polypropylene Composites J. Appl. Polym. Sci. 2008, 110, 2742-2747
18. Duquesne, S.; Samyn, F.; Bourbigot, S.; Amigouet, P.; Jouffret, F.; Shen, K. Influence of Talc on the Fire Retardant Properties of Highly Filled Intumescent Polypropylene Composites Polym. Adv. Technol. 2008, 19, 620-627
19. Wang, K.; Bahlouli, N.; Addiego, F.; Ahzi, S.; Remond, Y.; Ruch, D.; Muller, R. Effect of Talc Content on the Degradation of Re-extruded Polypropylene/Talc Composites Polym. Degrad. Stab. 2013, 98, 1275-1286
20. Alonso, M.; Velasco, J. Z.; Velasco, J. Z.; de Saja, J. A. Constrained Crystallication and Activity of Filler in Surface Modified Talc Polypropylene Composites Eur. Polym. J. 1997, 33, 255-262
21. Qin, Y.; Yang, J.; Yuan, M.; Xue, J.; Chao, J.; Wu, Y.; Yuan, M. Mechanical, Barrier, and Thermal Properties of Poly(lactic acid)/Poly(Trimethylene Carbonate)/Talc Composite Films J. Appl. Polym. Sci. 2014, 10.1002/APP.40016
22. Fowlks, A. C.; Narayan, R. The Effect of Maleated Polylactic Acid (PLA) as an Interfacial Modifier in PLA-Talc Composites J. Appl. Polym. Sci. 2010, 118, 2810-2820
23. Lefebvre, G.; Galet, L.; Chamayou, A. Dry Coating of Talc Particles with Fumed Silica: Influence of the Silica Concentratin on the Wettability and Dispersibility of the Composite Particles Powder Technol. 2011, 208, 372-377
24. Sawada, H. Fluorinated Peroxides Chem. Rev. 1996, 96, 1979-1808
25. Sawada, H. Synthesis of Self-Assembled Fluoroalkyl End-Capped Oligomeric Aggregates-Applications of These Aggregates to Fluorinated Oligomeric Nanocomposites Prog. Polym. Sci. 2007, 32, 509-533
26. Sawada, H. Preparation and Applications of Novel Fluoroalkyl End-Capped Oligomeric Nanocomposites Polym. Chem. 2012, 3, 46-65
27. Sawada, H.; Kikuchi, M.; Nishida, M. Low Molecular Weight Aromatic Compunds Possessing a Nonflammable Characteristic in Fluoroalkyl End-Capped Acrylic Acid Oligomer/Silica Nanocomposite Matrices after Calcination at 800 °C under Atomospheric Conditions J. Polym. Sci., Part A: Polym. Chem. 2011, 49, 1070-1078
28. Sawada, H.; Tashima, T.; Nishiyama, Y.; Kikuchi, M.; Kostov, G.; Goto, Y.; Ameduri, B. Iodine Transfer Terpolymerization of Vinylidene Fluoride, α-Trifluoromethacrylic Acid and Hexafluoropropylene for Exceptional Thermostable Fluoropolymers/Silica Nanocomposites Macromolecules 2011, 44, 1114-1124
29. Sawada, H.; Suzuki, T.; Takashima, H.; Takishita, K. Preparation and Properties of Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomeric Nanoparticels - A New Approach to Facile Creation of a Completely Superhydrophobic Coating Surface with These Nanoparticles Colloid Polym. Sci. 2008, 286, 1569-1574
30. Saito, T.; Tsushima, Y.; Sawada, H. Facile Creation of Superoleophobic and Superhydrophilic Surface by Using Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomer/Calcium Silicide Nanocomposites-Development of These Naocomposites to Environmental Cyclical Type-Fluorine Recycle through Formation of Calcium Fluoride Colloid Polym. Sci. 2015, 293, 65-73
31. Sawada, H.; Nakayama, M. Synthesis of Fluorine-Containing Organosilicon Oligomers J. Chem. Soc., Chem. Commun. 1991, 677-678
32. Sawada, H.; Matsuki, Y.; Goto, Y.; Kodama, S.; Sugiya, M.; Nishiyama, Y. Preparation of Novel Fluoroalkyl End-Capped Trimethoxyvinylsilane Oligomeric Nanoparticle-Encapsulated Binaphthol: Encapsulated Binaphthol Remaining Thermally Stable Even at 800 °C Bull. Chem. Soc. Jpn. 2010, 83, 75-81
33. Yao, X.; Song, Y.; Jiang, L. Applications of Bio-Inspired Special Wettable Surfaces Adv. Mater. 2011, 23, 719-734
34. Sunny, S.; Vogel, N.; Howell, C.; Vu, T. L.; Aizenberg, J. Lubricant-Infused Nanoparticulate Coating Assembled by Layer-by-Layer Deposition Adv. Funct. Mater. 2014, 24, 6658-6667
35. Mertaniemi, H.; Jokinen, V.; Sainiemi, S.; Franssila, A.; Marmur, O.; Ikkala, O.; Ras, R. H. A. Superhydrophobic Tracks for Low-Friction, Guided Transport of Water Droplets Adv. Mater. 2011, 23, 2911-2914
36. Feng, J.; Huang, B.; Zhong, M. Fabrication of Superhydrophobic and Heat-Insulating Antimony Doped Tin Oxide/Polyurethane Films by Cast Replica Micromolding J. Colloid Interface Sci. 2009, 336, 268-272
37. Wang, H.; Zhou, H.; Gestos, A.; Fang, J.; Lin, T. Robust, Superamphiphobic Fabric with Multiple Self-Healing Ability Against Both Physical and Chemical Damages ACS Appl. Mater. Interfaces 2013, 5, 10221-10226
38. Hsu, S.-H.; Chang, Y.-L.; Tu, Y.-C.; Tsai, C. M.; Su, W.-F. Omniphobic Low Moisture Permeation Transparent Polyacrylate/Silica Nanocomposite ACS Appl. Mater. Interfaces 2013, 5, 2991-2998
39. Lee, S. G.; Ham, S. S.; Lee, D. Y.; Bong, H.; Cho, K. Transparent Superhydrophobic/Translucent Superamphiphobic Coatings Based on Silica-Fluoropolymer Hybrid Nanoparticles Langmuir 2013, 29, 15051-15057
40. Goto, Y.; Takashima, H.; Takishita, K.; Sawada, H. Creation of Coating Surfaces Possessing Superhydrophobic and Superoleophobic Characteristics with Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomeric Nanocomposites Having Biphenylene Segments J. Colloid Interface Sci. 2011, 362, 375-381
41. Tsujii, K.; Yamamoto, T.; Onda, T.; Shibuichi, S. Super Oil-Repellent Surfaces Angew. Chem., Int. Ed. Engl. 1997, 36, 1011-1012
42. Shibuichi, S.; Yamamoto, T.; Onda, T.; Tsujii, K. Super Water- and Oil-Repellent Surfaces Resulting from Fractal Structure J. Colloid Interface Sci. 1998, 208, 287-294
43. An, Q.; Xu, W.; Hao, L.; Huang, L. Cationic Fluorinated Polyacrylate Core-Shell Latex with Pendant Long Chain Alkyl: Synthesis, Film Morphology, and Its Performance on Cotton Substrates J. Appl. Polym. Sci. 2013, 127, 1519-1526
44. Furukawa, Y.; Kotera, M. Water and Oil Repellency of Polysiloxanes with Highly Fluorinated Alkyl Side Chains J. Appl. Polym. Sci. 2003, 87, 1085-1091
45. Ceria, A.; Hauser, P. J. Atmospheric Plasma Treatment to Improve Durability of a Water and Oil Repellent Finishing for Acrylic Fabrics Surf. Coat. Technol. 2010, 204, 1535-1541
46. Yang, J.; Song, H.; Yan, X.; Tang, H.; Li, C. Superhydrophilic and Superoleophobic Citosan-based Nanocomposite Coatings for Oil/Water Separation Cellulose 2014, 21, 1851-1857
47. Ye, H.; Li, Z.; Chen, G.; Fan, D. Synthesis of Bis(1 H,1 H,2 H,2 H-perfluorooctyl)methylenesuccinate Copolymers and Their Application on Cotton Fabrics J. Appl. Polym. Sci. 2013, 127, 402-409
48. Liu, K.; Tian, Y.; Jiang, L. Bio-Inspired Superoleophobic and Smart Materials: Design, Fabrication, and Application Prog. Mater. Sci. 2013, 58, 503-564
49. Sumino, E.; Saito, T.; Noguchi, T.; Sawada, H. Facile Creation of Superoleophobic and Superhydrophilic Surface by Using Perfluoropolyether Dicarboxylic Acid/Silica Nanocomposites Polym. Adv. Technol. 2015, 26, 345-352
50. Xue, Z. X.; Wang, S. T.; Lin, L.; Chen, L.; Liu, M. J.; Feng, L.; Jiang, L. A Novel Superhydrophilic and Underwater Superoleophobic Hydrogel-Coated Mesh for Oil/Water Separation Adv. Mater. 2011, 23, 4270-4273
51. Gui, X. C.; Wei, J. Q.; Wang, K. L.; Cao, A. Y.; Zhu, H. W.; Jia, Y.; Shu, Q. K.; Wu, D. H. Carbon Nanotube Sponges Adv. Mater. 2010, 22, 617-621
52. Zhang, J.; Seeger, S. Polyester Materials with Superwetting Silicone Nanofilaments for Oil/Water Separation and Selective Oil Absorption Adv. Funct. Mater. 2011, 21, 4699-4704
53. Wang, C. X.; Yao, T. J.; Ma, C.; Fan, Z. X.; Wang, Z. Y.; Cheng, Y. R.; Lin, Q. Filter Paper with Selective Absorption and Separation of Liquids that Differ in Surface Tension ACS Appl. Mater. Interfaces 2009, 1, 2613-2617
54. Zhang, W.; Shi, Z.; Zhang, F.; Liu, X.; Jin, J.; Jiang, L. Superhydrophobic and Superoleophilic PVDF Membranes for Effective Separation of Water-in-Oil Emulsions with High Flux Adv. Mater. 2013, 25, 2071-2076
55. Allan, S. E.; Smith, B. W.; Anderson, K. A. Impact of the Deepwater Horizon Oil Spill on Bioavailable Polycyclic Aromatic Hydrocarbons in Gulf of Mexico Coastal Waters Environ. Sci. Technol. 2012, 46, 2033-20