The physics of deformation and fracture of polymers

The Physics of Deformation and Fracture of Polymers

Volumn , Issue , 2010, Pages 1-511

  Argon, A S ^a  

^a MASSACHUSETTS INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

DEFORMATION; FRACTURE; INORGANIC COMPOUNDS; METAL DRAWING; STUDENTS;

AMORPHOUS METALS; COMPUTATIONAL CODES; DEFORMATION AND FRACTURE; DEFORMATION PROCESSING; GRADUATE STUDENTS; MECHANICAL RESPONSE; MICRO-FLUIDIC DEVICES; STRUCTURAL RESPONSE;

POLYMERS;

EID: 84931331860     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9781139033046     Document Type: Book

References (554)

1. Angell, C. A. (1995) “Formation of glasses from liquids and biopolymers, ” Science, 267, 1924-1935.
2. Johnson, W. L. (1999) “Bulk glass-forming metallic alloys: science and technology, ” Mater. Res. Bull., 24, 42-56.
3. Grest, G. S. and Cohen, M. L. (1981) “Liquids, glasses and the glass transition: a free volume approach, ” Adv. Chem. Phys., 48, 455-525.
4. Zallen, R. (1983) Physics of Amorphous Solids, New York: John Wiley.
5. Angell, C. A. (1995) “Formation of glasses from liquids and biopolymers, ” Science, 267, 1924-1935.
6. Argon, A. S. (1968) “Delayed elasticity in inorganic glasses, ” J. Appl. Phys., 39, 408CM-086.
7. Argon, A. S. (1979) “Plastic deformation in metallic glasses, ” Acta Metall., 27, 47-58.
8. Argon, A. S. (2008) Strengthening Mechanisms in Ciystal Plasticity, Oxford: Oxford University Press.
9. Argon, A. S. and Demkowicz, M. J. (2008) “What can plasticity of amorphous silicon tell us about plasticity of metallic glasses?, ” Metall. Mater. Trans., 39A, 1762-1778.
10. Argon, A. S. and Kuo, H. Y. (1980) “Free energy spectra for inelastic deformation of five metallic glass alloys, ” J. Non-Ciyst. Solids, 37, 241-266.
11. Bernal, J. D. (1964) “The Bakerian Lecture 1962: The structure of liquids, ” Proc. Roy. Soc. London, A280, 299-322.
12. Brandes, E. A. (editor) (1983) Smithells Metals Reference Book, sixth edition, London: Butterworths.
13. Busch, R. (2000) “The thermo-physical properties of bulk metallic glass-forming liquids, ” J. Metals, 52, 39-42.
14. Cohen, M. FI. and Grest, G. S. (1979) “Liquid-glass transition, a free volume approach, ” Phys. Rev. B, 20, 1077-1098.
15. Cohen, M. FI. and Turnbull, D. (1959) “Molecular transport in liquids and glasses, ” J. Chem. Phys., 31, 1164-1169.
16. Demkowicz, M. J. and Argon, A. S. (2005a) “Liquid like atomic environments act as plasticity carriers, ” Phys. Rev., B, 72, 245205 (1-16).
17. Demkowicz, M. J. and Argon, A. S. (2005b) “Autocatalytic avalanches of unit inelastic shearing events are the mechanism of plastic deformation in amorphous silicon, ” Phys. Rev., B, 72, 245206 (1-17).
18. Deng, D. and Argon, A. S. (1986) “Analysis of the effect of aging on distributed relaxations, hardness, and embrittlement in Cu59 Zr41 and Feso B2o glasses, ” Acta Metall., 34, 2025-2038.
19. Deng, D., Argon, A. S., and Yip, S. (1989a) “A molecular dynamics model of melting and glass transition in an idealized two-dimensional material I, ” Phil. Trans. Roy. Soc., 329, 549-573.
20. Deng, D., Argon, A. S., and Yip, S. (1989b) “Topological features of structural relaxation in a two-dimensional model atomic glass II, ” Phil. Trans. Roy. Soc., 329, 575-593.
21. Deng, D., Argon, A. S., and Yip, S. (1989c) “Kinetics of structural relaxations in a two- dimensional model atomic glass III, ” Phil. Trans. Roy. Soc., 329, 595-612.
22. Deng, D., Argon, A. S., and Yip, S. (1989d) “Simulation of plastic deformation in a two- dimensional atomic glass by molecular dynamics IV, ” Phil. Trans. Roy. Soc., 329, 613-640.
23. Doolittle, A. K. (1951) “Studies in Newtonian flow II: dependence of the viscosity of liquids on free-space, ” J. Appl. Phys., 22, 1471-1475.
24. Duine, P. A., Sietsma, J., and van den Beukel, A. (1992) “Defect production and annihilation near equilibrium in amorphous Pd40Ni40P20 investigated from viscosity data, ” Acta Metall. Mater., 40, 743-751.
25. Egami, T. and Vitek, V. (1983) “Local structural fluctuations and properties of amorphous metals, ” in Amorphous Materials: Modeling of Structure and Properties, edited by Vitek, V., Warrendale, PA: American Institute of Mineralogical, Metallurgical, and Petroleum Engineers, pp. 127-145.
26. Egami, T. and Waseda, Y. (1984) “Atomic size effect on the fonnability of metallic glasses, ” J. Non-Cryst Solids, 64, 113-134.
27. Finney, J. L. (1970) “Random packing and the structure of simple liquids, I. The geometry of random close packing, ” Proc. Roy. Soc. London, A319, 479-493.
28. Fox, T. and Flory, P. (1950) “Second order transition temperatures and related properties of polystyrene I. Influence of molecular weight, ” J. Appl. Phys., 21, 581-591.
29. Fulcher, G. S. (1925) “Analysis of recent measurements of the viscosity of glasses, ” J. Amer. Ceramic Soc., 8, 339-355.
30. Hentschel, H. G. E., Ilyin, V., Makedonska, N., Procaccia, I., and Schupper, N. (2007) “Statistical mechanics of the glass transition as revealed by a Yoronoi tessellation, ” Phys. Rev. E„ 75, 050404 (1-4).
31. de Hey, P., Sietsma, J., and van den Beukel, A. (1998) “Structural disordering in amorphous Pd40Ni40P2o induced by high temperature deformation, ” Acta Mater., 46, 5873-5882.
32. Johnson, W. L. (1999) “Bulk glass forming metallic alloys: science and technology, ” MRS Bull., 24, 42-46.
33. Kato, H., Kawamura, Y., Inoue, A., and Chen, H. S. (1998) “Newtonian to non- Newtonian master flow curves of a bulk glass alloy Pd40Ni10Cu30P20, ” Appl. Phys. Lett., 73, 3665-3667.
34. Kawamura, Y., Shibata, T., Inoue, A., and Matsumoto, T. (1996) “Deformation behavior of ZrgsAlļoNiļoCiiļs glassy alloy with wide supercooled liquid region, ” Appl. Phys. Lett., 69, 1208-1210.
35. Kim, J.-J., Choi, Y., Suresh, S., and Argon, A. S. (2002) “Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature, ” Science, 295, 654-657.
36. Klement, W., Williams, R. H., and Duwez, P. (1960) “Non-crystalline structure in solidified gold-silicon alloys, ” Nature, 187, 869-870.
37. Kohlrausch, F. (1863) “Über die elastische Nachwirkung bei der Torsion, ” Pogg. Ann. Phys. Chem., 119, 337-368.
38. Lee, H.-L., Cagin, T., Johnson W. L., and Goddard, W. A. Ill (2003) “Criteria for formation of metallic glasses: the role of atomic size ratio, ” J. Chem. Phys., 119, 9858-9870.
39. Lu, J., Ramachandran, G., and Johnson, W. L. (2003) “Deformation behavior of the Zr4ı.2Ti13 sCu12 5Ni10Be22 5 bulk metallic glass over a wide range of strain rates and temperatures, ” Acta Mater., 51, 3429-3443.
40. Masuhr, A., Waniuk, R., Busch, R., and Johnson, W. L. (1999) “Time scales for viscous flow, atomic transport and crystallization in the liquid and supercooled liquid states of Zr4ı.2Ti13 sCu10Ni12 5Be22 5, ” Phys. Rev. Lett., 82, 2290-2294.
41. Miracle, D. B. (2004a) “Efficient local packing in metallic glasses, ” J. Non-Cryst. Solids, 342, 89-96.
42. Miracle, D. B. (2004b) “A structural model for metallic glasses, ” Nature Mater., 3, 697-702.
43. Miracle, D. B. (2006) “The efficient cluster packing model - an atomic structural model for metallic glasses, ” Acta Mater., 54, 4317-4336.
44. Miracle, D. B., Sanders, W. S., and Senkov, O. N. (2003) “The influence of efficient atomic packing on the constitution of metallic glasses, ” Phil. Mag., 83, 2409-2428.
45. Moynihan, C., Easteal, A. J., and deBolt, M. A. (1976) “Dependence of the Active temperature of glass on cooling rate, ” J. Amer. Ceramic Soc., 59, 12-16.
46. Peker, A. and Johnson, W. L. (1993) “A highly processable metallic glass: Zr41 2Ti13 S_ Cu12 5Ni10Be22 5, ” Appl. Phys. Lett., 63, 2342-2346.
47. Peker, A. and Johnson, W. L. (1994) “Beryllium bearing amorphous metallic alloys formed by low cooling rates”, U.S. Patent # 5, 288, 344, dated February 22, 1994.
48. Perrera, D. N. and Flarrowell, P. (1999) “Stability and structure of a supercooled liquid mixture in two dimensions, ” Phys. Rev. E, 59, 5721-5743.
49. Polk, D. E. (1972) “The structure of glassy metallic alloys, ” Acta Metall., 20, 485-491.
50. Scherer, G. W. (1990) “Theories of relaxation, ” J. Non-Cryst. Solids, 123, 75-89.
51. Shadowspeaker, L., Shah, M., and Busch, R. (2004) “On the crystalline equilibrium phases of the Zr57Cu15 4Ni12.6Al10Nb5 bulk metallic glass-forming alloy, ” Scripta Mater., 50, 1035-1038.
52. Sheng, Hi. W., Luo, W. K., Alamgir, F. M., Bai, J. M., and Ma, E. (2006) “Atomic packing and short-to-medium range order in metallic glasses, ” Nature, 439, 419-425.
53. Spaepen, F. and Turnbull, D. (1978) “Atomic transport and transformation behavior, ” in Metallic Glasses, edited by Gilman, J. J. and Leamy, HI. L., Metals Park, OH: ASM, pp. 114-127.
54. Stillinger, F. H., and Weber, T. A. (1985) “Computer simulation of local order in condensed phases of silicon, ” Phys. Rev. B, 31, 5262-5271.
55. Tamilian, G. and Hesse, W. (1926) “Die Abhängigkeit der Yiskosität von der Temperatur bei unterkiihlten Fliissigkeiten, ” Z. Anorg. Allg. Chem., 156, 245-257.
56. Taub, A. J. and Spaepen, F. (1980) “The kinetics of structural relaxation of a metallic glass, ” Acta Metall., 28, 1781-1788.
57. Torquato, S., Truskett, T. M., and Debenedetti, P. G. (2000) “Is random close packing of spheres well defined?, ” Phys. Rev. Lett., 84, 2064-2067.
58. Tsao, S. S. and Spaepen, F. (1985) “Structural relaxation of a metallic glass near equilibrium, ” Acta Metall., 33, 881-852.
59. van Aken, B., de Hey, P., and Sietsma, J. (2000) “Structural relaxation and plastic flow in amorphous LasoALsNLs, ” Mater. Sci. Eng., A278, 247-254.
60. Visscher, W. M. and Bolsterli, M. (1972) “Random packing of equal and unequal spheres in two and three dimensions, ” Nature, 239, 504-507.
61. Vogel, H. (1921) “Das Temperaturabhängigkeitsgesetz der Viskosität von Fliissigkeiten, ” Phys. Z„ 22, 645-646.
62. Volkert, C. A. and Spaepen, F. (1988) “Viscosity and structural relaxation in Pd4oNi4oPi9Siı, ” Mater. Sci. Eng., 97, 449-452.
63. Williams, G. and Watts, D. C. (1970) “Non-symmetrical dielectric relaxation behavior arising from a simple empirical decay function, ” Trans Faraday Soc., 66, 80-85.
64. Zallen, R. (1983) Physics of Amorphous Solids, New York, NY: J. Wiley.
65. Zheng, J., Carlson, W. B., and Reed, J. S. (1995) “The packing density of binary powder mixtures, ” J. Europ. Ceramic Soc., 66, 80-85.
66. Zhou, Q.-Y., Argon, A. S., and Cohen, R. E. (2001) “Enhanced case II diffusion of diluents into glassy polymers undergoing plastic flow, ” Polymer, 42, 613-621.
67. Geil, P. H. (1963) Polymer Single Crystals, New York: Interscience.
68. Gentile, F. T. and Suter, U. W. (1993) “Amorphous polymer microstructure, ” in Materials Science and Technology, edited by Cahn, R. W., Haasen, P., and Kramer, E.J., Structure and Properties of Polymers, vol. 12, edited by Thomas, E. L., pp 33-78.
69. Hoffman, J. D. and Miller, R. L. (1997) “Kinetics of crystallization from the melt and chain folding in polyethylene fractions revisited: theory and experiment, ” Polymer, 38, 3151-3312.
70. Lin, L. and Argon, A. S. (1994b) “Structure and plastic deformation of polyethylene, ” J. Mater. Sci., 29, 294-323.
71. Theodorou, D. N. and Suter, U. W. (1985) “Detailed molecular structure of a vinyl polymer glass, ” Macromolecules, 18, 1467-1478.
72. Anderson, F. R. (1964) “Morphology of isothermally bulk-crystallized linear polyethylene, ” J. Appl. Phys, 35, 64-70.
73. Argon, A. S. (2001) “Modeling of polymer glasses: deformation, ” in Encyclopedia of Materials Science and Technology, edited by Buschow, K. Hi. J., Cahn, R. W., Flemings, M. C., Ilschner, B., Kramer, E. J., Mahajan, S., and Veyssière, P., vol. 5, Polymers and Materials Chemistry, edited by Kramer E. J., Section 5.2, Amorphous and liquid crystalline polymers, edited by Windle A. Hi., Amsterdam: Elsevier, pp. 5712-5724.
74. Argon, A. S. (2008) Strengthening Mechanisms in Crystal Plasticity, Oxford: Oxford University Press.
75. Arizzi, S. Mott, P. Hi., Suter, U. W. (1992) “Space available to small diffusants in polymeric glasses - analysis of unoccupied space and its connectivity, ” J. Polymer Sci. Part B, 30, 415-426.
76. Bartczak, Z., Argon, A. S., and Cohen, R. E. (1992) “Deformation mechanisms and plastic resistance in single-crystal textured high density polyethylene, ” Macromolecules, 25, 5036-5053.
77. Bessonov, M. L, Koton, N. M., Kudryavtsev, Y. V., and Laius, L. A. (1987) Polyimides: Thermally Stable Polymers, New York: Consultants Bureau.
78. Bevis, M. and Crellin, E. B. (1971) “The geometry of twinning and phase transformations in crystalline polyethylene, ” Polymer, 12, 666-684.
79. Billmeyer, F. W. Jr. (1984) Textbook of Polymer Science, third edition, New York: J. Wiley & Sons.
80. Brown, D. and Clarke, J. HI. R. (1991) “Molecular dynamics simulation of an amorphous polymer under tension: 1. Phenomenology, ” Macromolecules, 24, 2075-2082.
81. Bryant, W. M. D. (1947) “Polythene fine structure, ” J. Polymer Sci., 2, 547-564.
82. Bunn, C. W. and Alcock, T. C. (1945) “The texture of polythene, ” Trans. Faraday Soc., 41, 317-325.
83. Chang, S. Z. D. and Lotz, B. (2005) “Enthalpic and entropic origins of nucleation barriers during polymer crystallization: the Hoffman-Lauritzen theory and beyond, ” Polymer, 46, 8662-8681.
84. Chui, C. and Boyce, M. C. (1999) “Monte Carlo modeling of amorphous polymer deformation: evolution of stress with strain, ” Macromolecules, 32, 3795-3808.
85. Egami, T. and Vitek, V. V. (1983) “Local structural fluctuations and properties of amorphous metals, ” in Amorphous Materials: Modeling of Structure and Properties, edited by Vitek, V., Warrendale, PA: Metallurgical Society of AIME, pp. 127-145.
86. Fischer, E. W. (1957) “Stufen und spiralförmiges Kristallwachstum bei Hochpolymeren, ” Z. Naturforschung, 12A, 753-754.
87. Fischer, E. W. (1978) “Studies of structure and dynamics of solid polymers by elastic and inelastic neutron scatterings, ” Pure Appl. Chem., 50, 1319-1341.
88. Flory, P. J. (1984) “Conformations of macromolecules in condensed phases, ” Pure Appl. Chem., 56, 305-312.
89. Flory, P. J. and Yoon, D. Y. (1978) “Molecular morphology in semi-crystalline polymers, ” Nature, 272, 226-229.
90. Frank, F. C. (1979) “General introduction, ” Faraday Discuss. Chem. Soc., 68, 7-13.
91. Geil, P. Hi. (1958) “Polyhedral structures in polymers grown from the melt, ” in Growth and Perfection of Ciystals, edited by Doremus, R. H., Roberts, B. W., and Turnbull, D., New York: Wiley & Sons, pp. 579-585.
92. Geil, P. H. (1963) Polymer Single Ciystals, New York: Interscience Publishers.
93. Geil, P. H., Anderson, F. R., Wunderlich, B., and Arakawa, T. (1964) “Morphology of polyethylene crystallized from the melt under pressure, ” J. Polymer Sci. Part A, 2, 3707-3720.
94. Gentile, F. T. and Suter, U. W. (1993) “Amorphous polymer microstructure, ” in Materials Science and Technology, edited by Cahn, R. W., Haasen, P., and Kramer, E. J., Structure and Properties of Polymers, vol. 12, edited by Thomas, E. L., pp. 33-78.
95. Guttman, C. M., Hoffman, J. D., and DiMarzio, E. A. (1979) “Monte Carlo calculations of SANS for various models of semi-crystalline polyethylene, ” Faraday Discuss. Chem. Soc., pp. 297-309.
96. Guttman, C. M., DiMarzio, E. A., and Hoffman, J. D. (1981) “Modeling the amorphous phase and the fold surface of a semi-crystalline polymer - the Gambler's Ruin Method”, Polymer, 22, 1466-1479.
97. Guttman, C. M. and DiMarzio, E. A. (1982) “Rotational isomeric modeling of the polyethylene-like polymer between two plates: connection to the “Gambler's Ruin” problem, ” Macromolecules, 15, 525-531.
98. Hirth, J. P. and Lothe, J. (1982) Theoiy of Dislocations, second edition, New York: Wiley Interscience.
99. Hoffman, J. D. (1983) Regime III crystallization in melt-crystallized polymers: the variable cluster model of chain folding, ” Polymer, 24, 3-26.
100. Hoffman, J. D. and Lauritzen, J. I. (1961) “Crystallization of bulk polymers with chain folding: theory of growth of lamellar spherulites, ” J. Res. Natl. Bur. Standards, 65A, 297-336.
101. Hoffman, J. D., Davis, G. T., and Lauritzen, J. I. (1976) “The rate of crystallization of linear polymers with chain folding, ” in Treatise on Solid State Chemistry, edited by Hannay, N. B., New York: Plenum Press, vol. 3, pp. 497-605.
102. Hoffman, J. D. and Miller, R. L. (1997) “Kinetics of crystallization from the melt and chain folding in polyethylene fractions revisited: theory and experiment, ” Polymer, 38, 3151-3212.
103. Holland, V. F. and Lindenmeyer, P. H. (1965) “Direct observation of dislocation networks in folded-chain crystals of polyethylene, ” J. Appl. Phys., 36, 3049-3056.
104. Hutnik, M., Gentile, F. T., Ludovice, P. J., Suter, U. W., and Argon, A. S. (1991) “An atomistic model of the amorphous glassy polycarbonate of 4, 4' isopropylidenediphenol, ” Macromolecules, 24, 5962-5969.
105. Keller, A. (1957) “A note on single crystals in polymers, evidence for a folded chain configuration, ” Phil. Mag., 2, 1171-1175.
106. Keller, A. (1958) “Morphology of crystalline polymers, ” in Growth and Perfection of Crystals, edited by Doremus, R. H., Roberts, B. W., and Turnbull, D., New York: J. Wiley & Sons, pp. 499-532.
107. Keller, A. and Waring, J. R. S. (1955) “The spherulitic structure of crystalline polymers. Part III. Geometrical factors in spherulitic growth and the fìne-structures, ” J. Polymer Sci., 17, 447-472.
108. Lauritzen, J. I. and Hoffman, J. D. (1959) “Formation of polymer crystals with folded chains from dilute solution, ” J. Appl. Phys., 31, 1680-1681.
109. Li, J. C. M. and Gilman, J. J. (1970) “Disclination loops in polymers, ” J. Appl. Phys., 41, 4248-4256.
110. Lin, L. and Argon, A. S. (1994a) “Rate mechanism of plasticity in the crystalline component of semi-crystalline Nylon-6, ” Macromolecules, 27, 6903-6914.
111. Lin, L. and Argon, A. S. (1994b) “Structure and plastic deformation of polyethylene, ” J. Mater. Sci., 29, 294-323.
112. Ludovice, P. J. and Suter, U. W. (1992) “Detailed molecular structure of a polar vinyl polymer glass, ” in Computational Modeling of Polymers, edited by Bicerano, J., New York: Marcel Dekker, pp. 401-435.
113. Mandelkern, L. (1955) “Crystallization kinetics in high polymers, polymer diluent mixtures, ” J. Appl. Phys., 26, 443-451.
114. Mandelkern, L. (1993) “The structure of polymers crystallized in the bulk, ” in Crystallization of Polymers, edited by Dosière, M., Dordrecht: Kluwer, pp. 25-37.
115. Mansfield, M. L. (1987) “Temperature dependent changes in the structure of the amorphous domains of semi-crystalline polymers, ” Macromolecules, 20, 1384-1393.
116. May, C. S. and Tanaka, Y. (editors) (1973) Epoxy Resins: Chemistry and Technology, New York: Marcel Dekker.
117. McMahon, P. E., McCullough, R. L., and Schlegel, A. A. (1967) “Molecular mechanics of point defects in polyethylene, ” J. Appl. Phys., 38, 4123-4139.
118. Miller, R. L. and Nielsen, L. E. (1960) “Crystallographic data for various polymers, ” J. Polymer Sci., 44, 391-395.
119. Mott, P. H., Argon, A. S., and Suter, U. W. (1993) “Atomistic modeling of plastic deformation of glassy polymers, ” Phil. Mag. A, 67, 931-978.
120. Peterson, J. M. (1968) “Peierls stress for screw dislocations in polyethylene, ” J. Appl. Phys., 39, 4920-4928.
121. Predecki, P. and Station, W. O. (1966) “Dislocations caused by chain ends in crystalline polymers, ” J. Appl. Phys., 37, 4053-4059.
122. Reneker, D. H. (1962) “Point dislocations in crystals of high polymer molecules, ” J. Polymer Sci., 59, S39-S42.
123. Reneker, D. H. and Mazur, J. (1982) “Stochastic defect diffusion model for relaxation effects in crystalline polyethylene, ” Polymer, 23, 401-412.
124. Reneker, D. H. and Mazur, J. (1983) “Dispirations, disclinations, dislocations, and chain twists in polyethylene crystals, ” Polymer, 24, 1387-1400.
125. Robyr, P., Muller, M., and Suter, U. W. (1999) “Atomistic simulations of glassy polystyrenes with realistic chain conformations, ” Macromolecules, 32, 8681-8684.
126. Schelten, J., Ballard, D. G. H., Wignal, G. D., Longman, G., and Schmatz, W. (1976) “Small-angle neutron scattering studies of molten and crystalline polyethylene, ” Polymer, 17, 751-757.
127. Shah, Y. M., Stern, S. A., and Ludovice, P. J. (1989) “Estimation of the free volume in polymers by means of a Monte Carlo technique, ” Macromolecules, 22, 4660-4662.
128. Sperling, L. H. (2001) Introduction to Physical Polymer Science, third edition. New York: Wiley International.
129. Station, W. O. and Geil, P. H. (1960) “Recrystallization of polyethylene during annealing, ” J. Appl. Polymer Sci., 3, 357-361.
130. Sylvester, M. F., Yip, A., and Argon, A. S. (1991) “Investigations by atomistic simulation of structural and dynamic differences in the glassy and liquid states of atactic polypropylene, ” in Computer Simulation of Polymers, edited by Roe, R. J., Upper Saddle River, NJ: Prentice Hall, pp. 105-121.
131. Theodorou, D. N. and Suter, U. W. (1985) “Detailed molecular structure of a vinyl polymer glass, ” Macromolecules, 18, 1467-1478.
132. Theodorou, D. N. and Suter, U. W. (1986) “Local structure and the mechanism of response of elastic deformation in a glassy polymer, ” Macromolecules, 19, 379-387.
133. Till, P. H. Jr. (1957) “The growth of single crystals of linear polyethylene, ” J. Polymer Sci., 24, 301-306.
134. Wunderlich, B. and Melillo, L. (1966) “Surface recrystallization of polyethylene extended- chain crystals, ” Science, 154, 1329-1330.
135. Wunderlich, B. and Melillo, L. (1968) “Morphology and growth of extended chain crystals of polyethylene, ” Makromol. Chem., 118, 250-264.
136. Yoon, D. Y. and Flory, P. J. (1977) “Small-angle neutron scattering by semi-crystalline polyethylene, ” Polymer, 18, 509-513.
137. Argon, A. S. (2008) Strengthening Mechanisms in Crystal Plasticity, Oxford: Oxford University Press.
138. Green, A. E. and Zerna, W. (1954) Theoretical Elasticity, Oxford: Clarendon Press.
139. McClintock, F. A. and Argon, A. S. (1966) Mechanical Behavior of Materials, Reading, MA: Addison Wesley.
140. Sokolnikoff, I. S. (1946) Mathematical Theory of Elasticity, New York: McGraw-Hill.
141. Ward, I. M. (1985) Mechanical Properties of Solid Polymers, second edition, New York: J. Wiley & Sons.
142. Aitken, A. C. (1954) Determinants and Matrixes, eighth edition, Edinburgh: Oliver & Boyd.
143. Argon, A. S. (2000) “Fracture, strength and toughness mechanisms, ” in Comprehensive Composite Materials, edited by Kelly, A. and Zweben, C., vol. 1, edited by Chou, T.-W., Oxford: Pergamon Press, pp. 763-802.
144. Barham, P. J. and Keller, A. (1979) “The achievement of high-modulus polyethylene fibers and the modulus of polyethylene crystals, ” J. Polymer Sci.: Polymer Lett. Edn., 17, 591-593.
145. Budiansky, B. (1965) “On the elastic moduli of some heterogeneous materials, ” J. Mech. Phys. Solids, 13, 223-227.
146. Capaccio, G., Gibson, A. G., and Ward, I. M. (1979) “Drawing and hydrostatic extension of ultra-high modulus polymers, ” in Ultra-High Modulus Polymers, edited by Ciferri, A. and Ward, I. M., London: Applied Science Publishers, pp. 1-76.
147. Chow, T. S. (1978) “Effect of particle shape at finite concentration on the elastic moduli of filled polymers, ” J. Polymer Sci. Polymer Phys. Edn., 16, 959-965.
148. Christensen, R. M. (1979) Mechanics of Composite Materials, New York: Wiley- InterScience.
149. Ciferri, A. and Ward, I. M. (editors) (1979) Ultra-High Modulus Polymers, London: Applied Science Publishers.
150. Eshelby, J. D. (1957) “The determination of the elastic field of an ellipsoidal inclusion and related problems, ” Proc. Roy. Soc. London, A241, 376-396.
151. Fakirov, S. (editor) (1996) Oriented Polymer Materials, Heidelberg: Hiithig & Wepf Yerlag.
152. Feldkamp, L. A., Venkataraman, G., and King J. S. (1968) “Dispersion relation for skeletal vibrations in deuterated polyethylene, ” Proceedings of a Symposium on Neutron Inelastic Scattering Held at Copenhagen, May 1968, Vienna: International Atomic Energy Agency, vol. II, pp. 159-165.
153. Gusev, A. A., Zehnder, M. M., and Suter, U. W. (1996) “Fluctuation formula for elastic constants, ” Phys. Rev. B, 54, 1-4.
154. Hadley, D. W. (1975) “Small strain elastic properties, ” in Structure and Properties of Oriented Polymers, edited by Ward, I. M., New York: Halsted Press, J. Wiley & Sons, pp. 290-325.
155. Hadley, D. W., Pinnock, P. R., and Ward, I. M. (1969) “Anisotropy in oriented fibers from synthetic polymers, ” J. Mater. Sci., 4, 152-165.
156. Holliday, L. and White, J. W. (1971) “The stiffness of polymers in relation to their structure, ” Pure Appl. Chem., 26, 545-582.
157. Hutnik, M., Argon, A. S., and Suter, U. W. (1993) “Simulation of elastic and plastic response in the glassy polycarbonate of 4, 4'-isopropylidene diphenol, ” Macromolecules, 26, 1097-1108.
158. Illers, K. H. and Jenckel, E. (1958) “Mechanische Relaxationserscheinungen in vernetztem und gequollenem Polystyrol, ” Rheol. Acta, 1, 322-330.
159. Karasawa, N., Dasgupta, S., and Goddard III, W. A. (1991) “Mechanical properties and force field parameters for polyethylene crystal, ” J. Phys. Chem., 95, 2260-2272.
160. McClintock, F. A. and Argon, A. S. (1966) Mechanical Behavior of Materials, Reading, MA: Addison Wesley.
161. Mizushima, S. and Shimanouchi, T. (1949) “Raman frequencies of n-paraffìn molecules, ” J. Amer. Chem. Soc., 71, 1320-1324.
162. Mott, P. H., Argon, A. S., and Suter, U. W. (1993) “Atomistic modeling of cavitation in glassy polymers, ” Phil. Mag. A., 68, 537-564.
163. Mura, T. (1982) Micromechanics of Defects in Solids, The Hague: Martinus Nijhoff.
164. Ray, J. R., Moody, M. C., and Rahman, A. (1986) “Calculation of elastic constants using isothermal molecular dynamics, ” Phys Rev. B, 33, 895-899.
165. Rice, J. R., Beltz, G. E., and Sun, Y. (1992) “Peierls framework for analysis of dislocation nucleation from a crack tip, ” in Topics in Fracture and Fatigue, edited by Argon, A. S., New York: Springer Yerlag, pp. 1-58.
166. Rose, J. EL, Smith, J. R., and Ferrante, J. (1983) “Universal features of bonding in metals, ” Phys. Rev. B, 28, 1845-1846.
167. Sauer J. A., Wall, R A., Fuscillo N., and Woodward, A. E. (1958) “Segmental motion in polypropylene, ” J. Appl. Phys., 29, 1385-1389.
168. Schaufele, R. F. and Shimanouchi, T. (1967) “Longitudinal acoustical vibrations of finite polymethylene chains, ” J. Chem. Phys., 47, 3605-3610.
169. Schmieder, K. and Wolf, K. (1953) “Mechanische Relaxationserscheinungen an Hochpolymeren, ” Kolloid Z., 134, 149-189.
170. Sinnott, K. M. (1962) “Dynamic shear behavior of high polymers at low frequencies, ” Soc. Plastics Eng. Trans., 2, 65-73.
171. Theodorou, D. N. and Suter, U. W. (1986) “Atomistic modeling of mechanical properties of polymeric glasses, ” Macromolecules, 19, 139-154.
172. Torquato, S. (2001) Random Fleterogeneous Materials: Microstructure and Macroscopic Properties, New York: Springer Yerlag.
173. van Krevelen, D. W. (1990) Properties of Polymers, third edition, Amsterdam: Elsevier.
174. Ward, I. M. (editor) (1975) Structure and Properties of Oriented Polymers, New York: Halsted Press, J. Wiley & Sons.
175. Weiner, J. H. (2002) Statistical Mechanics of Elasticity, second edition, Mineola, NY: Dover Publications, Inc, elements
176. McCrum, N. G., Read, B. E. and Williams, K. (1967) Anelastic and Dielectric Effects in Polymeric Solids, London: John Wiley & Sons (also 1991, New York: Dover Publications, Inc.).
177. Ward, I. M. (1983) Mechanical Properties of Solid Polymers, second edition. New York: John Wiley & Sons.
178. Bendler, J. T. and Schlesinger, M. F. (1992) “Defect diffusion and a two-fluid model for structural relaxation near the glass-liquid transition, ” J. Phys. Chem., 96, 3970-3973.
179. Boyd, R. H. (1985a) “Relaxation processes in crystalline polymers: experimental behavior - a review, ” Polymer, 26, 323-347.
180. Boyd, R. H. (1985b) “Relaxation processes in crystalline polymers: molecular interpretation - a review, ” Polymer, 26, 1123-1133.
181. Chow, T. S. (1978) “Effect of particle shape at finite concentration on the elastic moduli of filled polymers, ” J. Polymer Sci., 16, 959-965.
182. Doolittle, A. K. (1951) “Studies in Newtonian flow II. The dependence of the viscosity of liquids on free-space, ” J. Appl. Phys., 22, 1471-1475.
183. Ferry, J. D. (1980) Viscoelastic Properties of Polymers, New York: John Wiley & Sons.
184. Hutnik, M., Argon, A. S., and Suter, U. W. (1991a) “Quasi-static modeling of chain dynamics in the amorphous glassy polycarbonate of 4, 4/-isopropylidenediphenol, ” Macromolecules, 24, 5970-5979.
185. Hutnik, M., Gentile, F. T., Ludovice, P. J., Suter, U. W., and Argon, A. S. (1991b) “An atomistic model of the amorphous glassy polycarbonate of 4, 4/-isopropylidenediphenol, ” Macromolecules, 24, 5962-5969.
186. Illers, K. H. and Breuer, H. (1963) “Molecular motions of polyethylene terephthalate, ” J. Colloid Sci., 18, 1-31.
187. Leaderman, H. (1943) Elastic and Creep Properties of Filamentous Materials and Other Eligh Polymers, Washington, D.C: The Textile Foundation.
188. Lockett, F. J. (1972) Nonlinear Viscoelastic Solids, London: Academic Press.
189. McCrum, N. G., Read, B. E., and Williams, G. (1967) Anelastic and Dielectric Effects in Polymeric Solids, London: J. Wiley & Sons (also 1991, New York: Dover Publications, Inc.).
190. McLoughlin J. R. and Tobolsky, A. Y. (1951) “Effect of rate of cooling on stress relaxation of poly-methyl-methacrylate, ” J. Polymer Sci., 7, 658.
191. McLoughlin J. R. and Tobolsky, A. V. (1952) “The viscoelastic behavior of poly-methyl- methacrylate, ” J. Colloid Sci., 7, 555-568.
192. Mercier, J. P., Aklonis, J. J., Litt, M., and Tobolsky, A. V. (1965) “Viscoelastic behavior of the polycarbonate of bisphenol A, ” J. Appl. Polymer Sci., 9, 447-459.
193. Roy, A. K., Jones, A. A., and Inglefìeld, P. T. (1986) “Phenylene ring dynamics in solid polycarbonate: an extensive probe by carbon-13 solid state NMR line-shape studies at two field strengths, ” Macromolecules, 19, 1356-1362.
194. Schmieder, K. and Wolf, K. (1953) “Mechanische Relaxationserscheinungen an Hochpolymeren, ” Kolloid Z., 134, 149-189.
195. Struik, L. C. E. (1978) Physical Aging in Amorphous Polymers and other Materials, Amsterdam: Elsevier Scientific Publishing.
196. Stuart, H. A. (1959) “Kristallisationsbedingungen und morphologische Strukturen bei Hochpolymeren, ” Kolloid Z., 165, 3-15.
197. Timoshenko, S. (1930) Strength of Materials: Part I. Elementary Theory and Problems, New York: D. Van Nostrand Co., Inc
198. Vincent, P. I. (1965) “Mechanical properties of high polymers: deformation, ” in Physics of Plastics, edited by Ritchie, P. D., Princeton, NJ: D. Van Nostrand Co., Inc., pp. 24-119.
199. Walton, J. H., Lizak, M. J., Conradi, M. S., Gullion, T., and Schaefer, J. (1990) “Hydrostatic pressure dependence of molecular motions in polycarbonates, ” Macromolecules, 23, 416-422.
200. Ward, I. M. (1983) Mechanical Properties of Solid Polymers, second edition, New York: John Wiley & Sons.
201. Williams, M. L., Landel, R. F., and Ferry, J. D. (1955) “The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids, ” J. Amer. Chem. Soc., 77, 3701-3707.
202. Arruda, E. M. and Boyce, M. C. (1993) “A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials, ” J. Mech. Phys. Solids, 41, 389-412.
203. Flory, P. J. and Rehner, J., Jr. (1943) “Statistical mechanics of cross-linked polymer networks, ” J. Chem. Phys., 11, 512-520.
204. Gough, J. (1805) A description of a property of caoutchouc (india rubber), ” Memoirs Literary Phil. Soc. Manchester. Second Series, 1, 288-295.
205. Joule, J. P. (1859) “On some thermodynamic properties of solids, ” Phil. Trans. Roy. Soc., 149, 91-131.
206. Kuhn, W. and Griin, F. (1942) “Beziehungen zwischen elastischen Konstanten und Dehnungsdoppelbrechung hochelastischer Stoffe, ” Kolloid Z., 101, 248-271.
207. Kuhn, W. and Kuhn, H. (1946) “Statistische und energieelastische Riickstellkraft bei stark auf Dehnung beanspruchten Fadenmoleciilen, ” Helv. Chim. Acta, 29, 1095-1115.
208. Love, A. E. H. (1944) A Treatise on the Mathematical Theory of Elasticity, fourth edition, first American printing. New York: Dover Publications.
209. McClintock, F. A. and Argon, A. S. (1966) Mechanical Behavior of Materials, Reading, MA: Addison Wesley Publishing Co.
210. Memmler, K. (1934) The Science of Rubber, New York: Reinhold.
211. Meyer, K. EL, Susich, G. V., and Valko, E. (1932) “The elastic properties of organic high polymers and their significance, ” Kolloid Z., 59, 208-216.
212. Treloar, L. R. G. (1975) The Physics of Rubber Elasticity, third edition, Oxford: Clarendon Press.
213. Wang, M. C. and Guth, E. J. (1952) “Statistical theory of networks of non-Gaussian flexible chains, ” J. Chem. Phys., 20, 1144-1157.
214. Anand, L. and Gu, C. (2000) “Granular materials: constitutive equations and strain localization, ” J. Me ch. Phys. Solids, 48, 1701-1733.
215. Anand, L. and Su, C. (2007) “A constitutive theory for metallic glasses at high homologous temperatures, ” Acta Mater., 55, 3735-3747.
216. Argon, A. S. (1973) “Stability of plastic deformation, ” in The Homogeneity of Plastic Deformation, edited by Reed-Hill, R. E., Metals Park, OH: ASM, pp. 161-189.
217. Argon, A. S. (1979) “Plastic deformation in metallic glasses, ” Acta Metall., 27, 47-58.
218. Argon, A. S. (2008) Strengthening Mechanisms in Crystal Plasticity, Oxford: Oxford University Press.
219. Argon, A. S. and Bessonov, M. I. (1977) “Plastic flow in glassy polymers, ” Polymer Eng. Sci., 17, 174-182.
220. Argon, A. S. and Demkowicz, M. J. (2006) “Atomistic simulation and analysis of plasticity in amorphous silicon, ” Phil. Mag., 86, 4153-4172.
221. Argon, A. S. and Demkowicz, M. J. (2008) “What can plasticity of amorphous silicon tell us about plasticity of metallic glasses?, ” Metall. Mater. Trans. 39A, 1762-1778.
222. Argon, A. S. and Kuo, H.-Y. (1979) “Plastic flow in a disordered bubble raft (an analog of a metallic glass), ” Mater. Sci. Eng., 39, 101-109.
223. Argon, A. S. and Shi, L. T. (1982) “Analysis of plastic flow in an amorphous soap bubble raft by the use of an inter-bubble potential, ” Phil. Mag., 46, 275-294.
224. Argon, A. S. and Shi, L. T. (1983) “Development of visco-plastic deformation in metallic glasses, ” Acta Metall., 31, 499-507.
225. Argon, A. S., Andrews, R. D., Godrick, J. A., and Whitney, W. (1968) “Plastic deformation bands in glassy polystyrene, ” J. Appl. Phys., 39, 1899-1906.
226. Bak, P. (1996) How Nature Works: The Science of Self Organized Criticality, New York: Springer Yerlag.
227. Bulatov, V. V. and Argon, A. S. (1994) “A stochastic model for continuum elasto-plastic behavior III. Plasticity in ordered versus disordered solids, ” Mode 11. Simul. Mater. Sci. Eng., 2, 203-222.
228. Cantor, B. (1986) “Atomic migration in metallic glasses, ” in Amorphous Metals and Semiconductors, edited by Haasen, P. and Jaffee, R. L, Oxford: Pergamon Press, pp. 108-125.
229. Carslaw, H. S. and Jaeger, J. C. (1959) Conduction of Heat in Solids, second edition, Oxford: Oxford Science Publications.
230. Cohen, M. H. and Turnbull, D. (1959) “Molecular transport in liquids and glasses, ” J. Chem. Phys., 31, 1164-1169.
231. Coulomb, C. A. (1773) “Essai sur une application des regies des maximis et minimis à quelques problèmes de statique relatifs à l’architecture, ” Mem. Acad. Roy. Sci., 1, 343-382.
232. de Hey, P., Sietsma, J., and van den Beukel, A. (1998) “Structural disordering in amorphous Pd40Ni40P2o induced by high temperature deformation, ” Acta Mater., 46, 5873-5882.
233. Demetriou, M. D., Harmon, J. S., Min Tao, Gang Duan, Samwer, K. and Johnson, W. L. (2006) “Cooperative shear model for the rheology of glass-forming liquids, ” Phys. Rev. Lett. 97, 065502 (1-4).
234. Demkowicz, M. J. and Argon, A. S. (2005a) “Liquidlike atomic environments act as plasticity carriers in amorphous silicon, ” Phys. Rev. B, 72, 245205 (1-16).
235. Demkowicz, M. J. and Argon, A. S. (2005b) “Autocatalytic avalanches of unit in elastic shearing events are the mechanism of plastic deformation in amorphous silicon, ” Phys. Rev. B, 72, 245205 (1-16).
236. Deng, D. and Argon, A. S. (1986) “Structural relaxation and embrittlement of Cu59Zr41 and FesoB2o glasses, ” Acta Metall., 34, 2011-2023.
237. Deng, D. and Lu, B. (1983) “Density change of glassy Pd77Si16 5Cu6 5 alloy during cold drawing, ” Scripta Metall., 17, 515-518.
238. Deng, D., Argon, A. S., and Yip, S. (1989) “Simulation of plastic deformation in a two-dimensional atomic glass by molecular dynamics IV, ” Phil. Trans. Roy. Soc., A 329, 613-640.
239. Donovan, P. E. (1989) “A yield criterion for Pd4oNi4oP2o metallic glass, ” Acta Metall., 37, 445-456.
240. Donovan, P. E. and Stobbs, W. M. (1981) “The structure of shear bands in metallic glasses, ” Acta Metall., 29, 1419-1436.
241. Ertiirk, T. and Argon, A. S. (1987) “Plasticity by martensite transformations in cobalt base metallic glasses?, ” J. Mater. Sci., 22, 1365-1373.
242. Eshelby, J. D. (1957) “The determination of the elastic field of an ellipsoidal inclusion and related problems, ” Proc. Roy. Soc. London, A241, 376-396.
243. Eshelby, J. D. and Pratt, P. L. (1956) “Note on the heating effect of moving dislocations, ” Acta Metall., 4, 560-562.
244. Falk, M. L. and Langer, J. S. (1998) “Dynamics of deformation in amorphous solids, ” Phys. Rev. E, 57, 7192-7205.
245. Fox, T. and Flory, P. (1950) “Second order transition temperatures and related properties of polystyrene I. Influence of molecular weight, ” J. Appl. Phys., 21, 581-591.
246. Grest, G. S. and Cohen, M. H. (1981) “Liquids, glasses, and the glass transition: a free- volume approach, ” Adv. Chem. Phys., 48, 455-525.
247. Hennan, D. and Anand, L. (2008) “A constitutive theory for mechanical response of amorphous metals at high temperatures spanning the glass transition temperature: application to microscale thermoplastic forming, ” Acta Mater., 56, 3290-3305.
248. Hufnagel, T. C., Jiao, T., Li, Y., Xing, L.-Q. and Ramesh, K. T. (2002) “Deformation and failure of Zr57Ti5Cu2oNisAl10 bulk metallic glass under quasi-static and dynamic compression, ” J. Mater. Res., 17, 1441-1445.
249. Jensen, H. J. (1998) Self Organized Criticality, Cambridge: Cambridge University Press.
250. Johnson, W. L. and Samwer, K. (2005) “A universal criterion for plastic yielding of metallic glasses with a (T/Tg)2/3 temperature dependence, ” Phys. Rev. Lett., 95, 195501 (1-4).
251. Johnson, W. L., Demetriou, M. D., Harmon, J. S., Lind, M. L., and Samwer, K. (2007) “Rheology and ultrasonic properties of metallic glass-forming liquids: A potential energy landscape perspective, ” MRS Bull., 32, 644-650.
252. Kawashima, A., Zeng, Y., Fukuhara, M., Kurishita, H., Nishiyama, N., Miki, H., and Inoue, A. (2008) “Mechanical properties of a Ni60Pd20Pı7B3 bulk glassy alloy at cryogenic temperatures, ” Mater. Sci. Eng., A498, 475-481.
253. Kim, J.-J., Choi, Y., Suresh, S., and Argon, A. S. (2002) “Nanocrystallization during nanoindentation of a bulk amorphous metal alloy at room temperature, ” Science, 295, 654-657.
254. Kocks, U. F., Argon, A. S., and Ashby, M. F. (1975) Thermodynamics and Kinetics of Slip, Oxford: Pergamon Press.
255. Lewandowski, J. J. and Greer, A. L. (2006) “Temperature rise at shear bands in metallic glasses, ” Nature Mater., 15, 15-18.
256. Li, J., Spaepen, F., and Hufnagel, T. C. (2002) “Nanometre-scale defects in shear bands in a metallic glass, ” Phil. Mag., A82, 2623-2630.
257. Li, H., Fan, C., Tao, K., Choo, H., and Liaw, P. (2006) “Compressive behavior of a Zr-based metallic glass at cryogenic temperatures, ” Adv. Mater., 18, 752-754.
258. Lu, J., Ravichandran, G., and Johnson, W. L. (2003) “Deformation behavior of the Zr4ı.2Ti13 sCu12.5Ni10Be22.5 bulk metallic glass over a wide range of strain rates and temperatures, ” Acta Mater., 51, 3429-3443.
259. Lund, A. C. and Schuh, C. A. (2004) “The Mohr-Coulomb criterion for unit shear processes in metallic glasses, ” Intermet allies, 12, 1159-1165.
260. Maeda, K. and Takeuchi, S. (1978) “Computer simulation of deformation in two-dimensional amorphous structures, ” Phys. Stat. Sol., 49, 685-696.
261. Malandro, D. L. and Lacks, D. J. (1998) “Molecular level mechanical instabilities and enhanced self-diffusion in flowing liquids, ” Phys. Rev. Lett., 81, 5576-5579.
262. Malandro, D. L. and Lacks, D. J. (1999) “Relationships of shear-induced changes in the potential energy landscape to the mechanical properties of ductile glasses, ” J. Chem. Phys., 110, 4593-4600.
263. Maloney, C. and Lemaitre, A. (2004a) “Sub-extensive scaling in the athermal, quasistatic limit of amorphous matter in plastic shear flow, ” Phys. Rev. Lett., 93, 0160001 (1-4).
264. Maloney, C. and Lemaitre, A. (2004b) “Universal breakdown of elasticity at the onset of material failure, ” Phys. Rev. Lett., 93, 195501 (1-4).
265. McClintock, F. A. and Argon, A. S. (1966) Mechanical Behavior of Materials, Reading, MA: Addison-Wesley.
266. Megusar, J., Argon, A. S., and Grant, N. J. (1979) “Plastic flow and fracture in PdSoSi2o near Tg, ” Mater. Sci. Eng., 38, 63-72.
267. Mohr, O. (1900) “Welche Umstände bedingen die Elastizitätsgrenze und den Bruch eines Materials, ” Z. Vereines deutscher Ingenieure 44, 1524-1530.
268. Neuhauser, H. (1978) “Rate of shear band formation in metallic glasses, ” Scripta Metall., 12, 471-474.
269. Orowan, E. (1954) “Dislocations and mechanical properties, ” in Dislocations in Metals, edited by M. Cohen, New York: AIME-Institute of Metals.
270. Pan, D., Inoue, A., Sakurai, T., and Chen, M. W. (2008) “Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses, ” Proc. Natl. Acad. Sci., 105, 14769-14772.
271. Pelletier, J. M. (2005) “Dynamic mechanical properties in a Zr46 sTi13 sCu12.5Ni1oBe27.5 bulk metallic glass, ” J. Alloys Compounds, 393, 222-230.
272. Schuh, C. A., Argon, A. S., Nieh, T. G., and Wadsworth, J. (2003) “The transition from localized to homogeneous plasticity during nanoindentation of an amorphous metal, ” Phil. Mag., 83, 2585-2597.
273. Shi, L. T. and Argon, A. S. (1982) “The potential and force law between different-size bubbles in soap bubble rafts, ” Phil. Mag., A46, 255-274.
274. Spaepen, F. (1977) “A microscopic mechanism for steady state inhomogeneous flow in metallic glasses, ” Acta Metall., 25, 407-415.
275. Steif, P. S., Spaepen, F., and Hutchinson, J. W. (1982) “Strain localization in amorphous metals, ” Acta Metall., 30, 447-455.
276. Torquato, S. (2001) Random Heterogeneous Materials, New York: Springer Yerlag.
277. van Aken, B., de Hey, P., and Sietsma, J. (2000) “Structural relaxation and plastic flow in amorphous La5oAl25Ni25, ” Mater. Sci. Eng., A278, 247-254.
278. Ward, I. M. (1983) Mechanical Properties of Solid Polymers, second edition. New York: J. Wiley & Sons.
279. Windle, A. Hi. (1984) “The influence of thermal and mechanical histories on case II sorption of methanol by PMMA, ” J. Membrane Sci., 18, 87-97.
280. Xu, G. and Argon, A. S. (2000) “Homogeneous nucleation of dislocation loops under stress in perfect crystals, ” Phil. Mag. Lett., 80, 605-611.
281. Xu, Y.-K, Ma, H., Xu, J., and Ma, E. (2005) “Mg-based bulk metallic glass composites with plasticity and gigapascal strength, ” Acta Mater., 53, 1857-1866.
282. Zhou, Q.-Y., Argon, A. S., and Cohen, R. E. (2001) “Enhanced case-II diffusion of diluents into glassy polymers undergoing plastic flow, ” Polymer, 42, 613-621.
283. Ames, N. M., Srivastava, V., Chester, S. A., and Anand, L. (2009) “A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: applications, ” Int. J. Plasticity, 25, 1495-1539.
284. Anand, L., Ames, N. M., Srivastava, V., and Chester, S. A. (2009) “A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: formulation, ” Int. J. Plasticity, 25, 1474-1494.
285. Argon, A. S. (1973) “A theory for the low-temperature plastic deformation of glassy polymers, ” Phil. Mag., 28, 839-865.
286. Argon, A. S. (2008) Strengthening Mechanisms in Ciystal Plasticity, Oxford: Oxford University Press.
287. Argon, A. S. and Bessonov, M. I. (1977) “Plastic deformation in polyimides with new implications on the theory of plastic flow of glassy polymers, ” Phil. Mag., 35, 917-933.
288. Argon, A. S., Andrews, R. D., Godrick, J. A., and Whitney, W. (1968) “Plastic deformation bands in glassy polystyrene, ” J. Appl. Phys., 39, 1899-1906.
289. Arruda, E. M. and Boyce, M. C. (1993) “Evolution of plastic anisotropy: in amorphous polymers during straining, ” Int. J. Plasticity, 9, 697-720.
290. Arruda, E. M., Boyce, M. C., and Quintus-Bosz, H. (1993) “Effects of initial anisotropy on the finite strain deformation behavior of glassy polymers, ” Int. J. Plasticity, 9, 783-811.
291. Arruda, E. M., Boyce, M. C., and Jayachandran, R. (1995) “Effects of strain rate, temperature and thermo mechanical coupling on the finite strain deformation of glassy polymers, ” Mech. Mater., 19, 193-212.
292. Bauwens-Crowet, C., Bauwens, J.-C., and Homes, G. (1972) “The temperature dependence of yield of polycarbonate in uniaxial compression and tensile tests, ” J. Mater. Sci., 7, 176-183.
293. Born, M. and Huang, K. (1954) Dynamical Theory of Crystal Lattices, Oxford: Claredon Press.
294. Bowden, P. B. and Henshall, J. L. (1973), private communication.
295. Capaldi, F. M., Boyce, M. C., and Rutledge, G. C. (2002) “Enhanced mobility accompanies the active deformation of a glassy amorphous polymer, ” Phys. Rev. Lett, 89, 175505 (1-4).
296. Chui, C. and Boyce, M. C. (1999) “Monte Carlo modeling of amorphous polymer deformation: evolution of stress with strain, ” Macromolecules, 32, 3795-3808.
297. Coulomb, C. A. (1773) “Essai sur une application des regies des maximis et minimis à quelques problèmes de statique relatifs à l’architecture, ” Mem. Acad. Roy. Sci., 7, 343-387.
298. Crist, B. (1997) “Yield processes in glassy polymers, ” in The Physics of Glassy Polymers, edited by Haward, R. N. and Young, R. J., second edition, London: Chapman & Hall, pp.155-212.
299. Demkowicz, M. J. and Argon, A. S. (2005a) “Liquid-like atomic environments act as plasticity carriers in amorphous silicon, ” Phys. Rev. B, 72, 245205 (1—16).
300. Demkowicz, M. J. and Argon, A. S. (2005b) “Autocatalytic avalanches of unit inelastic shearing events are the mechanism of plastic deformation in amorphous silicon, ” Phys. Rev. B, 72, 245206 (1-17).
301. Eshelby, J. D. (1957) “The determination of the elastic field of an ellipsoidal inclusion and related problems, ” Proc. Roy. Soc. London, A241, 376-396.
302. Eyring, Hi. (1936) “Viscosity, plasticity and diffusion as examples of absolute reaction rates, ” J. Chem. Phys., 4, 283-291.
303. Gall, W. G. and McCrum, N. G. (1961) “Internal friction in stereo-regular polymethyl methacrylate, ” J. Polymer Sci., 50, 489-495.
304. Grest, G. S. and Cohen, M. H. (1981) “Liquids, glasses and the glass transition: a free volume approach, ” Adv. Chem. Phys., 48, 455-525.
305. G'sell, C., Hiver, J. M., Dahoun, A., and Souahi, A. (1992) “Video-controlled tensile testing of polymers and metals beyond the necking point, ” J. Mater. Sci., 27, 5031-5039.
306. Hasan, O. A. and Boyce, M. C. (1993) “Energy storage during inelastic deformation of glassy polymers, ” Polymer, 34, 5085-5092.
307. Hasan, O. A. and Boyce, M. C. (1995) “A constitutive model for the nonlinear viscoelastic viscoplastic behavior of glassy polymers, ” Polymer Eng. Sci., 35, 331-344.
308. Haward, R. N. and Thackray, G. (1968) “The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics, ” Proc. Roy. Soc. London, A302, 453-472.
309. Hoy, R. S. and Robbins, M. O. (2006) “Strain hardening in polymer glasses: effect of entanglement density, temperature, and rate, ” J. Polymer Sci. Pan B: Polymer Phys., 44, 3487-3500.
310. Hoy, R. S. and Robbins, M. O. (2007) “Strain hardening of polymer glasses: limitations of network models, ” Phys. Rev. Lett., 99, 117801 (1-4).
311. Hoy, R. S. and Robbins, M. O. (2008) “Strain hardening of polymer glasses: entanglements, energetics and plasticity, ” Phys. Rev. E, 77, 031801 (1-14).
312. Hutnik, M., Argon, A. S. and Suter, U. W. (1993) “Simulation of elastic and plastic response in the glassy polycarbonate of 4, 4'-isopropylidenediphenol, ” Macromolecules, 26, 1097-1108.
313. Illers, K. H. and Breuer, H. (1963) “Molecular motions in polyethylene terephthalate, ” J. Colloid Sci., 18, 1-31.
314. Kramer, E. J. (2005) “Open questions in physics of deformation of polymer glasses, ” J. Polymer Sci. Part B: Polymer Phys., 43, 3369-3371.
315. Loo, L. S., Cohen, R. E., and Gleason, K. K. (2000) “Chain mobility in the amorphous region of Nylon-6 observed under active uniaxial deformation, ” Science, 228, 116-119.
316. McClintock, F. A. and Argon, A. S. (1966) Mechanical Behavior of Materials, Reading, MA: Addison-Wesley.
317. Mohr, O. (1900) “Welche Umstände bedingen die Elastizitätsgrenze und den Bruch eines Materials, ” Z. Vereines deutscher Ingenieure, 44, 1524-1530.
318. Mott, P. H., Argon, A. S., and Suter, U. W. (1992) “The atomic strain tensor, ” J. Comput. Phys., 101, 140-150.
319. Mott, P. H., Argon, A. S., and Suter, U. W. (1993) “Atomistic modeling of plastic deformation of glassy polymers, ” Phil. Mag., 67, 931-978.
320. Müller, F. H. (1952) “Weitere Versuche und Betrachtungen zur Kaltverstreckung, ” Kolloid Z„ 116, 65-72.
321. Müller, F. H. (1970) “Calorimetric investigations of deformation processes, ” Pure Appl. Chem., 23, 201-217.
322. Mulliken, A. D. and Boyce, M. C. (2006) “Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates, ” Int. J. Solids Structures, 43, 1331-1356.
323. Nielsen, L. E. (1962) Mechanical Properties of Polymers, New York: Reinhold, p. 187.
324. Oleinik, E. F. (1991) “Distortional plasticity of organic glassy polymers, ” in High Peiform- ance Polymers, edited by Baer, E. and Moet, A., New York: Hanser, pp. 79-102.
325. Raghava, R., Caddell, R. M., and Yeh, G. S. Y. (1973) “The macroscopic yield behavior of polymers, ” J. Mater. Sci., 8, 225-232.
326. Ree, T. and Eyring, H. (1955) “Theory for non-Newtonian flow: 1. Solid plastic system, ” J. Appl. Phys., 26, 793-800.
327. Richeton, J., Ahzi, S., Daridon, L., and Rémond, Y. (2005) “A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures, ” Polymer, 46, 6035-6043.
328. Richeton, J., Ahzi, S., Vecchio, K. S., Jiang, F. C., and Adharapurapu, R. R. (2006) “Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers characterization and modeling of the compressive yield stress, ” Int. J. Solids Structures, 43, 2318-2335.
329. Richeton, J., Ahzi, S., Yecchio, K. S., Jiang, F. C., and Makradi, A. (2007) “Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates, ” Int. J. Solids Structures, 44, 7938-7954.
330. Robbins, M. O. and Hoy, R. S. (2009) “Scaling of the strain hardening modulus of glassy polymers with the flow stress, ” J. Polymer Sci. Part B: Polymer Phys., 47, 1406-1411.
331. Theodorou, D. N. and Suter, U. W. (1986) “Atomistic modeling of mechanical properties of polymeric glasses, ” Macromolecules, 19, 139-154.
332. Treloar, L. R. G. (1975) The Physics of Rubber Elasticity, third edition, Oxford: Clarendon Press.
333. Wall, R. A., Sauer, J. A., and Woodward, A. E. (1959) “Dynamic mechanical behavior of polystyrene: atactic and isotactic, ” J. Polymer Sci., 35, 281-284.
334. Zaroulis, J. and Boyce, M. C. (1997) “Temperature, strain rate, and strain state dependence on the evolution in mechanical behavior and structure of PET, with finite strain deformation, ” Polymer, 38, 1303-1315.
335. Zhou, Q.-Y., Argon, A. S., and Cohen, R. E. (2001) “Enhanced case-II diffusion of diluents into glassy polymers undergoing plastic flow, ” Polymer, 42, 613-621.
336. Fakirov, S. (1996) “Deformation induced texture development in polyethylene: computer simulation and experiments, ” in Oriented Polymer Materials, edited by Fakirov, S., Heidelberg: Hiithig & Wepf Verlag, pp. 265-301.
337. Oleinik, E. F. (2003) “Plasticity of semicrystalline flexible-chain polymers at the microscopic and mesoscopic levels, ” Polymer Sci. Series C, 45(1), 17-117.
338. Argon, A. S. (2008) Strengthening Mechanisms in Crystal Plasticity, Oxford: Oxford University Press.
339. Argon, A. S., Galęski, A., and Kazmierczak, A. K. (2005) “Rate mechanism of plasticity in semi-crystalline polyethylene, ” Polymer, 46, 11798-11805.
340. Arruda, E. M. and Boyce, M. C. (1993) “Evolution of plastic anisotropy in amorphous polymers during straining, ” Int. J. Plasticity, 9, 697-720.
341. Balta-Calleja, F. J. and Peterlin, A. (1969) “Plastic deformation of polypropylene; part 2, the influence of temperature and draw ratio on the axial long period, ” J. Mater. Sci., 4, 722-729.
342. Bartczak, Z., Argon, A. S., and Cohen, R. E. (1992a) “Deformation mechanisms and plastic resistance in single-crystal-textured high density polyethylene, ” Macromolecules, 25, 5036-5053.
343. Bartczak, Z., Cohen, R. E., and Argon, A. S. (1992b) “Evolution of the crystalline texture of high density polyethylene during uniaxial compression, ” Macromolecules, 25, 4692-4704.
344. Bartczak, Z., Galęski, A., Argon, A. S., and Cohen, R. E. (1996) “On the plastic deformation of the amorphous component in semi-crystalline polymers, ” Polymer, 37, 2113-2123.
345. Bevis, M. and Crellin, E. B. (1971) “The geometry of twinning and phase transformations in crystalline polyethylene, ” Polymer, 12, 666-684.
346. Bowden, P. B. and Young, R. J. (1974) “Deformation mechanisms in crystalline polymers, ” J. Mater. Sci., 9, 2034-2051.
347. Brooks, N. W. J. and Mukhtar, M. (2000) “Temperature and stem length dependence of the yield stress of polyethylene, ” Polymer, 41, 1475-1480.
348. Chuah, H.-H., Lin, J. S. and Porter, R. S. (1986) “On deformation of polyethylene: the question of melting and recrystallization, ” Macromolecules, 19, 2732-2736.
349. Coulomb, C. A. (1773) “Essai sur une application des regies des maximis et minimis à quelques problèmes de statique relatifs à l’architecture, ” Mem. Acad. Roy. Sci., 7, 343-382.
350. Ferry, J. D. (1980) Viscoelastic Properties of Polymers, New York: John Wiley & Sons.
351. Flory, P. J. and Yoon, D.-Y. (1978) “Molecular morphology in semicrystalline polymers, ” Nature, 212, 226-229.
352. Frenkel, J. (1926) “Theory of the elastic limits and rigidity of crystalline bodies, ” Z. Phys., 37, 572-609.
353. Galęski, A., Argon, A. S., and Cohen, R. E. (1988) “Changes in the morphology of bulk spherulitic Nylon-6 due to plastic deformation, ” Macromolecules, 21, 2761-2770.
354. Galęski, A., Argon, A. S., and Cohen, R. E. (1991) “Deconvolution of X-ray diffraction data to elucidate plastic deformation mechanisms in the uniaxial extension of bulk Nylon-6, ” Macromolecules, 24, 3945-3952.
355. Galęski, A., Bartczak, Z., Argon, A. S., and Cohen, R. E. (1992) “Morphological alterations during texture-producing plastic plane strain compression of high-density polyethylene, ” Macromolecules, 25, 5705-5718.
356. Gleiter, H. and Argon, A. S. (1971) “Plastic deformation of polyethylene crystals, ” Phil Mag., 24, 71-80.
357. Haudin, J. M. (1982) “Plastic deformation of semi-crystalline polymers, ” in Plastic Deformation of Amorphous and Semi-Ciystalline Materials, edited by Escaig, B. and G'sell, C., Les Ulis: Les Editions de Physique, pp. 291-311.
358. Hay, I. L. and Keller, A. (1965) “Polymer deformation in terms of spherulites, ” Colloid Polymer Sci., 204(1-2), 43-74.
359. Hay, I. L. and Keller, A. (1966) “A study on orientation effects in polyethylene in the light of crystalline texture, ” J. Mater. Sci., 1, 41-51.
360. Hay, I. L. and Keller, A. (1967) “A study on orientation effects in polyethylene in the light of crystalline texture: part 2, correlation of the molecular orientation with that of the textural elements, ” J. Mater. Sci., 2, 538-558.
361. Hill, R. (1972) “On constitutive macro-variables for heterogeneous solids at finite strain, ” Proc. Roy. Soc. London, A326, 131-147.
362. Hirth, J. P. and Lothe, J. (1982) Theory of Dislocations, second edition. New York: Wiley Interscience.
363. Hoffman, J. D., Davis, G. T., and Lauritzen, J. I. (1976) “The rate of crystallization of linear polymers with chain folding, ” in Treatise on Solid-State Chemistry, edited by Hannay, N. B., New York: Plenum Press, Vol. 3, 497-605.
364. Holland, V. F. and Lindenmeyer, P. H. (1965) “Direct observation of dislocation networks in folded chain crystals of polyethylene, ” J. Appl. Phys., 36, 3049-3056.
365. Karasawa, N., Dasgupta, S., and Goddard III, W.A. (1991) “Mechanical properties and force field parameters for polyethylene crystals, ” J. Amer. Chem. Soc., 95, 2260-2272.
366. Kazmierczak, T., Galęski, A., and Argon, A. S. (2005) “Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate, ” Polymer, 46, 8926-8936.
367. Keller, A. and Pope, D. P. (1971) “Identification of structural processes in deformation of oriented polyethylene, ” J. Mater. Sci., 6, 453-478.
368. Keller, A. and Sawada, S. (1964) “On the interior morphology of bulk polyethylene, ” Makromol. Chem., 74, 734-736.
369. Kocks, U. F., Argon, A. S., and Ashby, M. F. (1975) Thermodynamics and Kinetics of Slip, Oxford: Pergamon Press.
370. Lee, B. J., Argon, A. S., Parks, D. M., Ahzi, S., and Bartczak, Z. (1993a) “Simulation of large plastic deformation and texture evolution in high density polyethylene, ” Polymer, 34, 3555-3575.
371. Lee, B. J., Parks, D. M., and Ahzi, S. (1993b) “Micromechanical modeling of large plastic deformation and texture evolution in semi-crystalline polymers, ” J. Mech. Phys. Solids, 42, 1651-1687.
372. Lin, L. and Argon, A. S. (1992) “Deformation resistance in oriented Nylon-6, ” Macromolecules, 25, 4011-4024.
373. Lin, L. and Argon, A. S. (1994) “Rate mechanism of plasticity in the crystalline component of semicrystalline Nylon-6, ” Macromolecules, 27, 6903-6914.
374. McCrum, N. G., Read, B. E., and Williams, G. (1967) Anelastic and Dielectric Effects in Polymeric Solids, London: J. Wiley & Sons (also 1991, New York: Dover Publications Inc.).
375. McRae, M. A., Maddams, W. F., and Preedy, J. E. (1976) “An infra-red spectroscopic and X-ray diffraction study of cold-drawn high density polyethylene samples, ” J. Mater. Sci., 11, 2036-2044.
376. Mohr, O. (1900) “Welche Umstände bedingen die Elastizitätsgrenze und den Bruch eines Materials, ” Z. Vereines deutscher Ingenieure, 44, 1524-1530.
377. Oleinik, E. F. (2003) “Plasticity of semicrystalline flexible-chain polymers at the microscopic and mesoscopic levels, ” Polymer Sci. Series C, 45(1), 17-117.
378. Parks, D. M. and Ahzi, S. (1990) “Polycrystalline plastic deformation and texture evolution for crystals lacking five independent slip systems, ” J. Mech. Phys. Solids, 38, 701-724.
379. Peterlin, A. (1971) “Molecular model of drawing polyethylene and polypropylene, ” J. Mater. Sci., 6, 490-508.
380. Petermann, J. and Gleiter, H. (1973) “Plastic deformation of polyethylene crystals by dislocation motion, ” J. Mater. Sci., 8, 673-675.
381. Peterson, J. M. (1966) “Thermal initiation of screw dislocations in polymer crystal platelets, ” J. Appl. Phys., 37, 404-450.
382. Peterson, J. M. (1968) “Peierls stress for screw dislocations in polyethylene, ” J. Appl. Phys., 39, 4920-4928.
383. Sachs, G. (1928) “Zur Ableitung einer Fließbedingung, ” Z. Vereines deutscher Ingenieure, 72, 734-736.
384. Schönherr, Hi., Vancso, G. J., and Argon, A. S. (1995) “The structure of highly textured quasi-single-crystalline high-density polyethylene, probed by atomic force microscopy and small-angle X-ray scattering, ” Polymer, 36, 2115-2121.
385. Shadrake, L. G. and Guiu, F. (1976) “Dislocations in polyethylene crystals: line energies and deformation modes, ” Phil. Mag., 34, 565-581.
386. Taylor, G. I. (1938) “Plastic strain in metals, ” J. Inst. Metals, 62, 307-324.
387. Wu, W., Argon, A. S., and Turner, A. P. L. (1972) “Plastic deformation of polyethylene crystals on copper and NaCl crystal substrates, ” J. Polymer Sci. Polymer Phys. Edn., 10, 2397-2407.
388. Wu, W., Wignall, G. D., and Mandelkern, L. (1992) “A SANS study of the plastic deformation mechanism in polyethylene, ” Polymer, 33, 4137-4140.
389. Xu, G. (2002) “Energetics of nucleation of half dislocation loops at a surface crack, ” Phil. Mag., A82, 3177-3185.
390. Xu, G., and Ortiz, M. (1993) “A variational boundary integral method for the analysis of 3-D cracks of arbitrary geometry modeled as continuous distribution of dislocation loops, ” Int. J. Numer. Methods Eng., 36, 3675-3701.
391. Xu, G. and Zhang, C. (2003) “Analysis of dislocation nucleation from a crystal surface based on the Peierls-Nabarro dislocation model, ” J. Mech. Phys. Solids, 51, 1371-1394.
392. Young, R. J. (1988) “Screw dislocation model for yield of polyethylene, ” Mater. Forum, 11, 210-216.
393. Andersson, H. and Bergkvist, H. (1970) “Analysis of a nonlinear crack model, ” J. Mech. Phys. Solids, 18, 1-28.
394. Andrews, E. H. and Bevan, L. (1972) “Mechanics and mechanism of environmental crazing in a polymeric glass, ” Polymer, 13, 337-346.
395. Argon, A. S. (1973) “Physical basis of distortional and dilatational plastic flow in glassy polymers, ” Macromol. Sci. - Phys., B8, 573-596.
396. Argon, A. S. (1975) “Role of heterogeneities in the crazing of glassy polymers, ” Pure Appl. Chem., 43, 247-272.
397. Argon, A. S. (2011) “Craze initiation in glassy polymers-revisited, ” Polymer, 52, 2319-2327.
398. Argon, A. S. and Cohen, R. E. (1990) “Crazing and toughness of block copolymers and blends, ” in Advances in Polymer Science, vols. 91/92, edited by Kausch, H. H., Berlin: Springer-Yerlag, pp. 301-352.
399. Argon, A. S. and Demkowicz, M. J. (2008) “What can plasticity of amorphous silicon tell us about plasticity of metallic glasses?, ” Metall. Mater. Trans., 39A, 1762-1778.
400. Argon, A. S. and Hannoosh, J. G. (1977) “Initiation of crazes in polystyrene, ” Phil. Mag., 36, 1195-1216.
401. Argon, A. S. and Salama, M. M., (1976) “The mechanism of fracture in glassy materials capable of some inelastic deformation, ” Mater. Sci. Eng., 23, 219-230.
402. Argon, A. S. and Salama, M. M., (1977) “Growth of crazes in glassy polymers, ” Phil. Mag., 36, 1217-1234.
403. Argon, A. S., Cohen, R. E., Gebizlioglu, O. S., and Schwier, C. E. (1983) “Crazing in block copolymers and blends, ” in Advances in Polymer Science, vols. 52/53, edited by Kausch, H. H., Berlin: Springer-Verlag, pp. 275-335.
404. Bates, F. S., Cohen, R. E., and Argon A. S. (1983) “Dynamic mechanical properties of polystyrene containing micro spherical inclusions of polybutadiene: influence of domain boundaries and rubber molecular weight, ” Macromolecules, 16, 1108-1114.
405. Beahan, P., Bevis, M. and Hull, D. (1972) “A comparison of the morphology of crazes formed in thin films and in bulk specimens of polystyrene, ” J. Mater. Sci., 8, 161-168.
406. Beahan, P., Bevis, M., and Hull, D. (1975) “Fracture processes in polystyrene, ” Proc. Roy. Soc. London, A343, 525-535.
407. Boyce, M. C., Argon, A. S. and Parks, D. M. (1987) “Mechanical properties of compliant composite particles effective in toughening glassy polymers, ” Polymer, 28, 1680-1694.
408. Bowden, P. B. (1973) “The yield behavior of glassy polymers, ” in The Physics of Glassy Polymers, edited by Haward, R. N., New York: Halsted Press, J. Wiley and Sons, pp. 279-339.
409. Brown, H. R. and Kramer, E. J. (1981) “Craze microstructure from small angle X-ray scattering (SAXS), ” J. Macromol. Sci. - Phys., B19, 487-522.
410. Chow, T. S. (1978) “Effect of particle shape at finite concentration on the elastic moduli of filled polymers, ” J. Polymer Sci. Polymer Phys. Edn., 16, 959-965.
411. Dettenmaier, M. (1983) “Intrinsic crazes in polycarbonate: phenomenology and molecular interpretation of a new phenomenon, ” in Advances in Polymer Science, vols. 52/53, edited by Kausch, H. H., Berlin: Springer-Verlag, pp. 57-104.
412. Donald, A. M. and Kramer, E. J. (1981) “The mechanism of craze tip advance in glassy polymers, ” Phil. Mag., 43, 857-870.
413. Eshelby, J. D. (1957) “The determination of the elastic field of an ellipsoidal inclusion and related problems, ” Proc. Roy. Soc. London, A241, 376-396.
414. Goodier, J. N. (1933) “Concentration of stress around spherical and cylindrical inclusions and flaws, ” Trans. ASME, 55, 39-44.
415. Green, A. E. and Zerna, W. (1954) Theoretical Elasticity, Oxford: Clarendon Press.
416. Grest, G. S. and Cohen, M. H. (1981) “Liquids, glasses and the glass transition: a free- volume approach, ” Adv. Chem. Phys., 48, 455-525.
417. Gurson, A. L. (1977) “Continuum theory of ductile rupture by void nucleation and growth: part I - yield criteria and flow rules for porous ductile media, ” J. Eng. Mater. Technol., 99, 1-15.
418. Hamley, I. W. (2004a) “Introduction to block copolymers, ” in Developments in Block Copolymers Science and Technology, edited by Hamley, I. W., New York: John Wiley & Sons, pp. 1-30.
419. Hamley, I. W. (editor) (2004b) Developments in Block Copolymers Science and Technology. New York: John Wiley & Sons.
420. Hannoosh, J. G. (1975) Craze Initiation in Glassy Polymers, Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA.
421. Kambour, R. P. (1973) “A review of crazing and fracture in thermoplastics, ” J. Polymer Sci. Macromol. Rev., 7, 1-154.
422. Kambour, R. P. and Russell, R. R. (1971) “Electron microscopy of crazes in polystyrene and rubber modified polystyrene: use of iodine-sulphur eutectic as a craze reinforcing impregnant, ” Polymer, 12, 237-246.
423. Kramer, E. J. (1983) “Microscopic and molecular fundamentals of crazing, ” in Advances in Polymer Science, vols. 52/53, edited by Kausch, H. H., Berlin: Springer-Verlag, pp. 1-56.
424. Kramer, E. J. and Berger, L. L. (1990) “Fundamental processes of craze growth and fracture, ” in Advances in Polymer Science, vols. 91/92, edited by Kausch, H. H., Berlin: Springer-Verlag, pp. 1-68.
425. Lauterwasser, B. D. and Kramer, E. J. (1979) “Microscopic mechanisms and mechanics of craze growth and fracture, ” Phil Mag., A39, 469-495.
426. Mott, P. H., Argon, A. S., and Suter, U. W. (1992) “The atomic strain tensor, ” J. Comput. Phys., 101, 140-150.
427. Mott, P. H., Argon, A. S., and Suter, U. W. (1993a) “Atomistic modeling of plastic deformation of glassy polymers, ” Phil. Mag., 67, 931-978.
428. Mott, P. H., Argon, A. S., and Suter, U. W. (1993b) “Atomistic modeling of cavitation of glassy polymers, ” Phil. Mag., 68, 537-564.
429. Needleman, A., Tvergaard, V., and Hutchinson, J. W. (1992) “Void growth in plastic solids, ” in Topics in Fracture and Fatigue, edited by Argon, A. S., New York: Springer- Verlag, pp. 145-178.
430. Neuber, H. (1946) Theory of Notch Stresses: Principles for Exact Stress Calculations (translated from the German edition), Ann Arbor, MI: J. W. Edwards.
431. Oxborough, R. J. and Bowden, P. B. (1973) “A general critical strain criterion for crazing in amorphous glassy polymers, ” Phil. Mag., 28, 547-559.
432. Paredes, E. and Fischer, E. W. (1979) “Röntgenkleinwinkehmtersuchungen zur Struktur der Crazes (Fließzonen) in Polycarbonat und Polymethylmethacrylate’ Makromol. Chem., 180, 2707-2722.
433. Rabinowitz, S. and Beardmore, P. (1972) “Craze formation and fracture in glassy polymers, ” CRC Crit. Rev. Macromol. Sci., 1, 1-45.
434. Rose, J. H., Smith, J. R., and Ferrante, J. (1983) “Universal features of bonding in metals, ” Phys. Rev. B, 28, 1835-1845.
435. Schwier, C. E. (1984) Crazing and Large Deformation Behavior in a Model Set of Polystyrene! Polybutadiene Di-block Copolymers, Sc.D. Thesis, Massachusetts Institute of Technology, Cambridge, MA.
436. Schwier, C. E., Argon, A. S., and Cohen, R. E. (1985a) “Craze plasticity in a series of polystyrene-polybutadiene di-block copolymers with spherical morphology, ” Phil. Mag., 52, 581-603.
437. Schwier, C. E., Argon, A. S., and Cohen, R. E. (1985b) “Crazing in polystyrene- polybutadiene di-block copolymers containing cylindrical polybutadiene domains, ” Polymer, 26, 1985-1993.
438. Sternstein, S. S. and Myers, F. A. (1973) “Yielding of glassy polymers in the second quadrant of principal stress space, ” J. Macromol. Sci. Phys., B8, 539-571.
439. Sternstein, S. S. and Ongchin, L. (1969) “Yield criteria for plastic deformation of glassy high polymers in general stress fields, ” Polymer Preprints, 10(2), 1117-1124.
440. Taylor, G. I. (1950) “The instability of liquid surfaces when accelerated in a direction perpendicular to their planes I, ” Proc. Roy. Soc. London, A201, 192-196.
441. Theodorou, D. N. and Suter, U. W. (1986) “Local structure and mechanism of response to elastic deformation in a glassy polymer, ” Macromolecules, 19, 379-387.
442. Wu, S. (1982) Polymer Interfaces and Adhesion, New York: Marcel Decker.
443. Anderson, T. L. (1995) Fracture Mechanics: Fundamentals and Applications, second edition, Ann Arbor, MI: CRC Press.
444. Hutchinson, J. W. (1979) A Course on Nonlinear Fracture Mechanics, Lyngby: Department of Solid Mechanics, Technical University of Denmark, pp. 1-101.
445. Kinloch, A. J. and Young, R. J. (1983) Fracture Behaviour of Polymers, New York: Elsevier Applied Science Publishers.
446. Williams, J. G. (1984) Fracture Mechanics of Polymers, New York: John Wiley and Sons.
447. Anderson, T. L. (1995) Fracture Mechanics: Fundamentals and Applications, second edition Ann Arbor, MI: CRC Press.
448. Argon, A. S. and Cohen, R. E. (2003) “Toughenability of polymers, ” Polymer 44, 6013-6032.
449. Dugdale, D. S. (1960) “Yielding of steel sheets containing slits, ” J. Mech. Phys. Solids, 8, 100-104.
450. Huang, D. D. (1996) “The application of fracture mechanics to materials selection, ” Polymer Eng. Sci., 36, 2270-2274.
451. Huang, D. D., Wood, B. A., and Flexman, E. A. (1998) “Toughened Nylons: a fracture mechanics investigation, ” Adv. Mater., 10, 1207-1211.
452. Hutchinson, J. W. (1968) “Singular behavior at the end of a tensile crack in a hardening material”, J. Mech. Phys. Solids, 16, 13-31.
453. Hutchinson, J. W. (1979) A Course on Nonlinear Fracture Mechanics, Lyngby: Department of Solid Mechanic; The Technical University of Denmark, pp. 1-101.
454. Inglis, C. E. (1913) “Stresses in a plate due to the presence of cracks and sharp corners, ” Trans. Naval Arch., 60, 219-230.
455. Kambour, R. P. (1973) “A review of crazing and fracture in thermoplastics”, J. Polymer Sci. Macromol. Rev., 1, 1-154.
456. Kausch, H. H. (1987) Polymer Fracture, New York: Springer-Verlag.
457. Kelly, A. (1966) Strong Solids, Oxford: Clarendon Press.
458. Kelly, A., Tyson, W. R., and Cottrell, A. H. (1967) “Ductile and brittle crystals, ” Phil. Mag., 15, 567-586.
459. Kramer, E. J. (1983) “Microscopic and molecular fundamentals of crazing, ” in Crazing in Polymers, edited by Kausch, H. H., Advances in Polymer Science, vols. 52/53, Berlin: Springer-Verlag, pp. 1-56.
460. Kramer, E. J. and Berger, L. L. (1990) “Fundamental processes of craze growth and fracture, ” in Crazing in Polymers II, edited by Kausch, H. H., Advances in Polymer Science, vols. 91/92, Berlin: Springer-Verlag, pp. 1-68.
461. Lauterwasser, B. D. and Kramer, E. J. (1979) “Microscopic mechanisms and mechanics of craze growth and fracture, ” Phil. Mag. A, 39, 469-495.
462. McClintock, F. A. (1969) “Crack growth in fully plastic grooved tensile specimens, ” in Physics of Strength and Plasticity, edited by Argon, A. S., Cambridge, MA: MIT Press, pp. 307-326.
463. McClintock, F. A. and Argon, A. S. (1966) Mechanical Behavior of Materials, Reading, MA: Addison-Wesley.
464. McMeeking, R. M. (1977) “Finite deformation analysis of crack-tip opening in elastic- plastic materials and implications for fracture, ” J. Mech. Phys. Solids, 25, 357-381.
465. Mott, P. H., Argon, A. S., and Suter, U. W. (1993a) “Atomistic modeling of plastic deformation of glassy polymers, ” Phil. Mag., 67, 931-978.
466. Mott, P. H., Argon, A. S., and Suter, U. W. (1993b) “Atomistic modeling of cavitation of glassy polymers, ” Phil. Mag., 68, 537-564
467. Plati, E. and Williams J. G. (1975a) “The determination of the fracture parameters for polymers in impact, ” Polymer Eng. Sci., 15, 470-477.
468. Plati, E. and Williams, J. G. (1975b) “Effect of temperature on the impact fracture toughness of polymers, ” Polymer, 16, 915-920.
469. Rice, J. R. and Rosengren, G. F. (1968) “Plane strain deformation near a crack tip in a power-law hardening material, ” J. Mech. Phys. Solids, 16, 1-12.
470. Rice, J. R., Beltz, G. E., and Sun, Y. (1992) “Peierls framework for analysis of dislocation nucleation, ” in Topics in Fracture and Fatigue, edited by Argon, A. S., New York: Springer-Verlag, pp. 1-58.
471. Riedel, H. (1987) Fracture at High Temperatures, Berlin: Springer-Verlag.
472. Rose, J. H, Smith, J. R. and Ferrante, J. (1983) “Universal features of bonding in metals, ” Phys. Rev. B, 28, 1835-1845.
473. Ryu, C. Y., Ruokolainen, J., Fredrickson, G. H., Kramer, E. J., and Hahn, S. F. (2002) “Chain architecture effects on deformation and fracture of block copolymers with unentangled matrixes, ” Macromolecules, 35, 2157-2166.
474. Tada, H., Paris, P. and Irwin, G. (1985) The Stress Analysis of Cracks Handbook, second edition, St Louis, MO: Del Research Corp.
475. Theodorou, D. N. and Suter, U. W. (1986a) “Atomistic modeling of mechanical properties of polymeric glasses, ” Macromolecules, 19, 139-154.
476. Theodorou, D. N. and Suter, U. W. (1986b) “Local structure and the mechanism of response to elastic deformations in a glassy polymer, ” Macromolecules, 19, 379-387.
477. Vincent, P. I. (1972) “A correlation between critical tensile strength and polymer cross- sectional area, ” Polymer, 13, 558-560.
478. Ward, I. M. (1983) Mechanical Properties of Solid Polymers, second edition. New York: John Wiley & Sons.
479. Williams, J. G. (1984) Fracture Mechanics of Polymers, New York: John Wiley & Sons (Halsted Press).
480. Zhurkov, S. N. (1965) “Kinetic concept of the strength of solids, ” Int. J. Fract. Mechanics, 1, 311-323.
481. Zhurkov, S. N. and Tomashevskii, E. E. (1966) “Investigation of the fracture process by the electron spin resonance method, ” in Proceedings of a Conference on the Physical Basis of Yield and Fracture, edited by Strickland, A. C. and Cook, R. A., London: Physical Society, pp. 200-208.
482. Zhurkov, S. N., Kuksenko, V. S., and Slutsker, A. I (1969) “Sub-micro-crack formation under stress, ” in Fracture 1969, edited by P. L. Pratt, London: Chapman and Hall, pp. 531-544.
483. Zhurkov, S. N. and Korsukov, V. E. (1974) Atomic mechanism of fracture of solid polymers, ” J. Polymer Sci. Polymer Phys. Edn., 12, 385-398.
484. Amos, J. L. (1974) “The SPE international award address - (1973) the developments of impact polystyrene-a review, ” Polymer Eng. Sci., 14, 1-11.
485. Argon, A. S. (1989) “Sources of toughness in polymers, ” in Advances in Fracture Research, edited by Salama, K., Ravichandar, K., Taplin, D. M. R, and Rama Rao, P., Oxford: Pergamon Press, Vol. 4, pp. 2661-2681.
486. Argon, A. S. (1999) “Craze plasticity in low molecular weight diluent-toughened polystyrene, ” J. Appl. Polymer Sci., 72, 13-33.
487. Argon, A. S. (2000) “Fracture: strength and toughness mechanisms, ” in Comprehensive Composite Materials, edited by Kelly, A. and Zweben, C., Vol. 1, edited by Chou, T.-W. Oxford: Pergamon Press, pp. 763-802.
488. Argon, A. S., Im, J., and Needleman, A. (1975) “Distribution of plastic strain and negative pressure in necked steel and copper bars, ” Metall. Mater. Trans., 6A, 815-824.
489. Argon, A. S. and Hannoosh, J. G. (1977) “Initiation of crazes in polystyrene, ” Phil. Mag., 36, 1195-1216.
490. Argon, A. S. and Salama, M. M. (1977) “Growth of crazes in glassy polymers, ” Phil. Mag., 36, 1217-1234.
491. Argon, A. S., Cohen, R. E., and Gebizlioglu, O. S. (1985) “Craze plasticity in PS, initiated from compliant block copolymer particles of PB/PS, ” in Toughening of Plastics II, London: The Plastics and Rubber Institute, pp. 12.1-12.11.
492. Argon, A. S., Cohen, R. E., and Gebizlioglu, O. S. (1987) “Mechanistic and continuum aspects of toughness in heterogeneous polymers, ” in Mechanical Behavior of Materials - V, edited by Yan, M. G., Zhang, S. H., and Sheng, Z. M., Oxford: Pergamon Press, Vol. 1, pp. 3-14.
493. Argon, A. S., Cohen, R. E., Gebizlioglu, O. S., Brown, H.R., and Kramer, E. J. (1990) “A new mechanism of toughening glassy polymers. 2. Theoretical approach, ” Macromolecules, 23, 3975-3982.
494. Argon, A. S., Cohen, R. E. and Mower, T. M. (1994) “Mechanisms of toughening brittle polymers, ” Mater. Sci. Eng., A176, 79-90.
495. Argon, A. S., Cohen, R. E. and Patel, A. C. (1999) “A mechanistic model of case II diffusion of a diluent into a glassy polymer, ” Polymer, 40, 6991-7012.
496. Argon, A. S. and Cohen, R. E. (2003) “Toughenability of polymers, ” Polymer, 44, 6013-6032.
497. Argon, A. S., Galęski, A. and Kazmierczak, T. (2005) “Rate mechanisms of plasticity in semi-crystalline polyethylene, ” Polymer, 46, 11798-11805.
498. Bartczak, Z., Argon, A. S., and Cohen, R. E. (1992) “Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene, ” Macromolecules, 25, 5036-5053.
499. Bartczak, Z., Argon, A. S., Cohen, R. E., and Weinberg, M. (1999a) “Toughness mechanism in semi-crystalline polymer blends: I. High density polyethylene toughened with rubber, ” Polymer, 40, 2331-2346.
500. Bartczak, Z., Argon, A. S., Cohen, R. E., and Weinberg, M. (1999b) “Toughness mechanism in semi-crystalline polymers: II. High density polyethylene toughened with calcium carbonate filler particles, ” Polymer, 40, 2347-2365.
501. Bartczak, Z., Argon, A. S., Cohen, R. E., and Kowalewski, T. (1999c) “The morphology and orientation of polyethylene in films of sub-micron thickness crystallized in contact with calcite and rubber substrates, ” Polymer, 40, 2367-2380.
502. Beahan, P., Bevis, M., and Hull, D. (1975) “Fracture processes in polystyrene, ” Proc. Roy. Soc. London, A343, 525-535.
503. Borggreve, R. J. M. and Gaymans, R. J. (1989) “Impact behavior of nylon-rubber blends: 4. Effect of the coupling agent, maleic anhydride, ” Polymer, 30, 63-70.
504. Boyce, M. C., Argon, A. S., and Parks, D. M. (1987) “Mechanical properties of compliant composite particles effective in toughening glassy polymers, ” Polymer, 28, 1680-1694.
505. Brooks, N. W. J. and Mukhtar, M. (2000) “Temperature and stem length dependence of the yield stress of polyethylene, ” Polymer, 41, 1475-1480.
506. Broutman, L. J. and Panizza, A. (1971) “Micromechanics studies of rubber-reinforced glassy polymers, ” Int. J. Polymeric Mater., 1, 95-109.
507. Brown, H. R., Argon, A. S., Cohen, R. E., Gebizlioglu, O. S., and Kramer, E. J. (1989) “New mechanisms for craze toughening of glassy polymers, ” Macromolecules, 22, 1002-1004.
508. Bucknall, C. B. (1977) Toughened Plastics, London: Applied Science Publishers.
509. Bucknall, C. B. and Smith, R. R. (1965) “Stress-whitening in high-impact polystyrenes, ” Polymer, 6, 437-446.
510. Budiansky, B., Hutchinson, J. W., and Lambropoulos, J. C. (1983) “Continuum theory of dilatant transformation toughening in ceramics, ” Int. J. Solids Structures, 19, 337-355.
511. Chow, T. S. (1978a) “Effect of particle-shape at finite concentration of the elastic moduli of filled polymer, ” J. Polymer Sci. Polymer Phys. Edn., 16, 959-965.
512. Chow, T. S. (1978b) “Effect of particle-shape at finite concentration on thermal expansion of filled polymers, ” J. Polymer Sci. Polymer Phys. Edn., 16, 967-970.
513. Clark, G. A., El Soudani, S. M„ Ferguson, W. G„ Smith, R. D„ and Knott, J. W. (1978) Ductile Crack Extension in Pressure Vessel Steels, London: Institution of Mechanical Engineers.
514. Dagli, G., Argon, A. S., and Cohen, R. E. (1995) “Particle-size effect in craze plasticity of high-impact polystyrene, ” Polymer, 36, 2173-2180.
515. Dettenmaier, M. and Leberger, D. (1990) “Crazing of polymer-diluent mixtures, ” in Advances in Polymer Science vols. 91/92, edited by, Kausch, H. H. Berlin: Springer-Verlag pp. 119-135.
516. Donald, A. M. and Kramer, E. J. (1982) “Craze-initiation and growth in high-impact polystyrene, ” J. Appl. Polymer Sci., 27, 3729-3741.
517. Doyle, M. J., Maranci, A., Orowan, E., and Stork, S. T. (1972) “The fracture of glassy polymers, ” Proc. Roy. Soc. London, A239, 137-151.
518. Evans, A. G. (1990) “Perspective on the development of high-toughness ceramics, ” J. Amer. Ceramic Soc., 73, 187-206.
519. Evans, A. G., Ahmad, Z. B., Gilbert, D. G., and Beaumont, P. W. (1986) “Mechanisms of toughening in rubber toughened polymers, ” Acta Metall., 34, 79-87.
520. Flexman, E. A. Jr. (1979) “Impact behavior of Nylon-66 compositions: ductile-brittle transitions, ” Polymer Eng. Sci., 19, 564-571.
521. Gebizlioglu, O. S., Argon, A. S., and Cohen, R. E. (1985) “Craze plasticity and toughness of particulate block copolymer blends, ” Polymer, 26, 529-542.
522. Gebizlioglu, O. S., Beckham, H. W., Argon, A. S, Cohen, R. E., and Brown, H. R. (1990) “A new mechanism of toughening glassy polymers. 1. Experimental procedures, ” Macromolecules, 23, 3968-3974.
523. Goodier, N. J. (1933) “Concentration of stress around spherical and cylindrical inclusions and flaws, ” ASME Trans. J. Appl. Mech., 55, 39-44.
524. Kambour, R. P. and Bernier, G. A. (1968) “Craze formation yield stress and the so-called ductile-brittle transition in glassy polymers, ” Macromolecules, 1, 190-191.
525. Kawai, H., Hashimoto, T., Miyoshi, K., Uno, H., and Fujimura, M. J. (1980) “Micro domain structure and some related properties of block copolymers. IF Plastic deformation mechanisms of the glassy component in rubber-toughened plastics, ” J. Macromol. Sci. Part B -Phys., B17, 427-472.
526. Kelly, A., Tyson, W. R., and Cottrell, A. Hi. (1967) “Ductile and brittle crystals, ” Phil. Mag., 15, 567-586.
527. Kinloch, A. J. (1985) “Mechanics and mechanisms of fracture of thermosetting epoxy polymers, ” in Advances in Polymer Science, Vol. 72, edited by Kausch, H. H., Berlin: Springer-Verlag, pp. 5-67.
528. Kramer, E. J. (1983) “Microscopic and molecular fundamentals of crazing, ” in Advances in Polymer Science, vols. 52/53, edited by Kausch, H. H., Berlin: Springer-Verlag, pp. 1-56.
529. Kramer, E. J. and Bubeck, R. A. (1978) “Growth kinetics of solvent crazes in glassy polymers, ” J. Polymer Sci. Polymer Phys. Edn., 16, 1195-1217.
530. Kruse, R. (1979) “Polymeric poly blend compositions toughened by addition of liquid polymers of a conjugated diene monomer”, U.S. Patent 4, 154, 715.
531. Lin, L. and Argon, A. S. (1992) “Deformation resistance in oriented Nylon 6, ” Macromolecules, 25, 4011-4024.
532. Lin, L. and Argon, A. S. (1994) “Rate mechanism of plasticity in the crystalline component of semi-crystalline Nylon 6, ” Macromolecules, 27, 6903-6914.
533. Majumdar, B., Keskkula, H., and Paul, D. R. (1994) “Mechanical behavior and morphology of toughened aliphatic polyamides, ” Polymer, 35, 1399-1408.
534. Muratoglu, O. K., Argon, A. S., Cohen, R. E., and Weinberg, M. (1995a) “Toughening mechanism of rubber-modified polyamides, ” Polymer, 36, 921-930.
535. Muratoglu, O. K., Argon, A. S., and Cohen, R. E. (1995b) “Crystalline morphology of polyamide-6 near planar surfaces, ” Polymer, 36, 2143-2152.
536. Muratoglu, O. K., Argon, A. S., Cohen, R. E., and Weinberg, M. (1995c) “Microstructural processes of fracture of rubber-modified polyamides, ” Polymer, 36, 4771-4786.
537. Muratoglu, O. K., Argon, A. S., Cohen, R. E., and Weinberg, M. (1995d) “Microstructural fracture processes accompanying growing cracks in tough rubber-modified polyamides, ” Polymer, 36, 4787-4795.
538. Murray, J. and Hull, D. (1970) “Fracture surface of polystyrene: mackerel pattern, ” J. Polymer Sci. Polymer Phys., 8, 583-594.
539. Ostromislensky, I. I. (1927) “Process for manufacturing plastic compositions and products obtained thereby, ” U.S. Patent 1, 613, 673.
540. Paredes, E. and Fischer, E. W. (1979) “Röntgenkleinwinkehmtersuchungen zur Structure der Crazes (Fließzonen) in Polycarbonat und Polymethylmethacrylate’ Makromol. Chem., 180, 2707-2722.
541. Piórkowska, E., Argon, A. S., and Cohen, R. E. (1990) “Size effect of compliant rubbery particles in craze plasticity in polystyrene, ” Macromolecules, 23, 3837-3848.
542. Plati, E. and Williams, J. G. (1975a) “The determination of the fracture parameters for polymers in impact, ” Polymer Eng. Sci., 15, 470-477.
543. Plati, E. and Williams, J. G. (1975b) “Effect of temperature on the impact fracture toughness of polymers, ” Polymer Eng. Sci., 16, 915-920.
544. Qin, J., Argon, A. S., and Cohen, R. E. (1999) “Toughening of glassy polymers by prepackaged deformation-activated diluents, ” J. Appl. Polymer Sci., 71, 1469-1490.
545. Rossmanith H. P. (1996) “George Rankin Irwin: the father of fracture mechanics, ” in Cleavage Fracture: The George R. Irwin Symposium, edited by Chan, K. S., Warrendale, PA: TMS, pp. 3-38.
546. Ryu C. Y., Ruokolainen, J., Fredrickson, G. H., and Kramer E. J. (2002) “Chain architecture effects on deformation and fracture of block copolymers with unentangled matrices, ” Macromolecules, 35, 2157-2166.
547. Shih, F. C. (1983) Tables of Hutchinson-Rice-Rosengren Singular Field Quantities, MRL Report, MRLE-147, Providence, RI: Brown University.
548. Spiegelberg, S. H., Argon, A. S., and Cohen, R. E. (1994) “Kinetics of crazing in polybutadiene/polystyrene blends, ” J. Appl. Polymer Sci. 53, 1251-1259.
549. Thomas, N. L. and Windle, A. H. (1982) “A theory of case II diffusion, ” Polymer, 23, 529-542.
550. Truss, R. W., Clarke, P. L., Duckett, R. A., and Ward, I. M. (1984) “The dependence of yield behavior on temperature, pressure, and strain rate for linear polyethylenes of different molecular weight and morphology, ” J. Polymer Sci. Polymer Phys. Edn., 22, 191-209.
551. Wang, T. S., Matsuo, M., and Kwei, T. K. (1971) “Criteria of craze initiation in glassy polymers, ” J. Appl. Phys., 42, 4188-4196.
552. Williams, J. G. (1984) Fracture Mechanics of Polymers, New York: John Wiley & Sons.
553. Wu, S. (1985) “Phase structure and adhesion in polymer blends: a criterion for rubber toughening, ” Polymer, 26, 1855-1863.
554. Wu, S. (1988) “A generalized criterion for rubber toughening: the critical matrix ligament thickness, ” J. Appl. Polymer Sci., 35, 549-561.