A bibliometric analysis of green manufacturing and similar frameworks

Management of Environmental Quality: An International Journal

Volumn 26, Issue 4, 2015, Pages 566-587

  Sangwan, Kuldip Singh ^a   Mittal, Varinder Kumar ^a  

^a BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE   (India)

Author keywords

Cleaner production; Green manufacturing; Sustainable manufacturing; Sustainable production

Indexed keywords

EID: 84930170368     PISSN: 14777835     EISSN: None     Source Type: Journal    
DOI: 10.1108/MEQ-02-2014-0020     Document Type: Article

References (102)

1. Allen, D., Bauer, D., Bras, B., Gutowski, T., Murphy, C., Piwonka, T. and Wolff, E. (2002), “Environmentally benign manufacturing: trends in Europe, Japan, and the USA”, Journal of Manufacturing Science and Engineering, Vol. 124 No. 4, pp. 908-920.
2. Allen, M.S. and Arvizu, D.E. (1994), “Technology transfer at sandia national laboratories”, In Proceedings of the Twenty-Seventh Annual Hawaii IEEE International Conference on System Sciences, Vol. 4, Wailea, HI, January 4-7, pp. 465-472.
3. Allwood, J. (2009), “Sustainable manufacturing: what would make a big enough difference?”, Seminar at NIST, May, Department of Engineering, University of Cambridge, Cambridge.
4. Alting, D.L. and Jøgensen, D.J. (1993), “The life cycle concept as a basis for sustainable industrial production”, CIRP Annals – Manufacturing Technology, Vol. 42 No. 1, pp. 163-167.
5. Azzone, G. and Noci, G. (1998), “Identifying effective PMSs for the deployment of “green” manufacturing strategies”, International Journal of Operations & Production Management, Vol. 18 No. 4, pp. 308-335.
6. Badurdeen, F. and Liyanage, J.P. (2011), “Sustainable value co-creation through mass customisation: a framework”, International Journal of Sustainable Manufacturing, Vol. 2 No. 2, pp. 180-203.
7. Badurdeen, F., Iyengar, D., Goldsby, T.J., Metta, H., Gupta, S. and Jawahir, I.S. (2009), “Extending total life-cycle thinking to sustainable supply chain design”, International Journal of Product Lifecycle Management, Vol. 4 No. 1, pp. 49-67.
8. Balan, K. (2008), “The green issue insights from a machine manufacturer”, The Shot Peener Summer 2008, pp. 4-8.
9. Biehl, M. and Gaimon, C. (1999), “Clean manufacturing strategies under the influence of public policy”, Management of Engineering and Technology, Technology and Innovation Management, PICMET, Portland International Conference, August, Vol 2, pp. 105-113.
10. Bishop, P.L. (2000), Pollution Prevention - Fundamentals and Practice, McGraw Hill, New York, NY.
11. Bovea, M.D. and Gallardo, A. (2006), “The influence of impact assessment methods on materials selection for eco-design”, Materials & Design, Vol. 27 No. 3, pp. 209-215.
12. Burchart-Korol, D. (2011), “Green manufacturing based on life cycle assessment (LCA)”, Transport and Logistics, pp. 55-60.
13. Carruthers, D.V (1996), “Indigenous ecology and the politics of linkage in Mexican social movements”, Third World Quarterly, Vol. 17 No. 5, pp. 1007-1028.
14. Chryssolouris, G., Papakostas, N. and Mavrikios, D. (2008), “A perspective on manufacturing strategy: produce more with less”, CIRP Journal of Manufacturing Science and Technology, Vol. 1 No. 1, pp. 45-52.
15. Chuang, S.P. and Yang, C.L. (2014), “Key success factors when implementing a green manufacturing system”, Production Planning & Control: The Management of Operations, Vol. 25 No. 11, pp. 923-937.
16. Curkovic, S. (2003), “Environmentally responsible manufacturing: the development and validation of a measurement model”, European Journal of Operational Research, Vol. 146 No. 1, pp. 130-155.
17. Curkovic, S. and Landeros, R., (2000), “An environmental Baldrige?”, Mid-American Journal of Business, Vol. 15 No. 2, pp. 63-76.
18. Curkovic, S., Melnyk, S.A, Calantone, R. and Handfield, R. (1999), “Environmentally responsible manufacturing: past research, current results, and future directions for research”, Cite Seer, Working Paper published by MSU, East Lansing, MI, pp. 1-21.
19. Curran, MA. (1996), “Environmental life-cycle assessment”, The International Journal of Life Cycle Assessment, Vol. 1 No. 3, pp. 179-179.
20. Darnall, N., Nehmann, G., Priest, J. and Sarkis, J. (1994), “A review of environmentally conscious manufacturing theory and practices”, International Journal of Environmentally Conscious Design and Manufacturing, Vol. 3 No. 2, pp. 49-58.
21. De Ron, A.J. (1998), “Sustainable production: the ultimate result of a continuous improvement”, International Journal of Production Economics, Vols 56-57, pp. 99-110.
22. Deif, A.M. (2011), “A system model for green manufacturing”, Journal of Cleaner Production, Vol. 19 No. 14, pp. 1553-1559.
23. Dickinson, D.A., Draper, C.W., Saminathan, M, Sohn, J.E. and Williams, G. (1995), “Green product manufacturing”, AT&T Technical Journal, Vol. 74 No. 6, pp. 26-35.
24. Dornfeld, D. (2009), “Green manufacturing blog”, available at: Error! Hyperlink reference not valid., (accessed July 23, 2013).
25. Dornfeld, D., Yuan, C., Diaz, N., Zhang, T. and Vijayaraghavan, A. (2013), “Introduction to green manufacturing”, in Dornfeld, D.A. (Ed.), Green Marketing, Springer, New York, NY, pp. 1-23.
26. Drizo, A. and Pegna, J. (2006), “Environmental impacts of rapid prototyping: an overview of research to date”, Rapid Prototyping Journal, Vol. 12 No. 2, pp. 64-71.
27. Duda, M. and Shaw, J.S. (1997), “Life cycle assessment”, Society, Vol. 35 No. 1, pp. 38-43.
28. Duhan, R., Bansal, M. and Dhaliwal, H., (2012), “Environmental conscious manufacturing and use of analytical network process decision tool in ECM”, International Journal of Mechanical Engineering and Robotics Research, Vol. 1 No. 3, pp. 1-13.
29. Durham, D.R. (2002), “Environmentally benign manufacturing: current practices and future trends”, Journal of Minerals, Metals and Materials Society, Vol. 54 No. 5, pp. 34-37.
30. Elkington, J., (1994), “Towards the suitable corporation: win-win-win business strategies for sustainable development”, California Management Review, Vol. 36 No. 2, pp. 90-100.
31. Ellram, L.M., Tate, W. and Carter, C.R. (2008), “Applying 3DCE to environmentally responsible manufacturing practices”, Journal of Cleaner Production, Vol. 16 No. 15, pp. 1620-1631.
32. Falkman, E.G. (1996), Sustainable Production and Consumption: A Business Perspective, World Business Council for Sustainable Development (WBCSD), Geneva.
33. Fresner, J. (1998), “Cleaner production as a means for effective environmental management”, Journal of Cleaner Production, Vol. 6 Nos 3-4, pp. 171-179.
34. Frijns, J. and Vliet, B.V. (1999), “Small-scale industry and cleaner production strategies”, World Development, Vol. 27, No. 6, pp. 967-983.
35. Frondel, M., Horbach, J. and Rennings, K. (2007), “End-of-pipe or cleaner production? An empirical comparison of environmental innovation decisions across OECD countries”, Business Strategy and the Environment, Vol. 16 No. 8, pp. 571-584.
36. Garetti, M. and Taisch, M. (2012), “Sustainable manufacturing: trends and research challenges”, Production Planning & Control, Vol. 23 Nos 2-3, pp. 83-104.
37. Gluch, P. and Baumann, H. (2004), “The life cycle costing (LCC) approach: a conceptual discussion of its usefulness for environmental decision-making”, Building and Environment, Vol. 39 No. 5, pp. 571-580.
38. Gottberg, A., Morris, J., Pollard, S., Mark-Herbert, C. and Cook, M. (2006), “Producer responsibility, waste minimization and the WEEE directive: case studies in eco-design from the European lighting sector”, Science of the Total Environment, Vol. 359 Nos 1-3, pp. 38-56.
39. Granoff, B. (1991), “Environmentally conscious manufacturing at sandia national laboratory”, Environmentally Conscious Manufacturing/Technology Workshop, Albuquerque, NM, February, pp. 20-21.
40. Gungor, A. and Gupta, S.M. (1999), “Issues in environmentally conscious manufacturing and product recovery: a survey”, Computers & Industrial Engineering, Vol. 36 No. 4, pp. 811-853.
41. Gutowski, T., Murphy, C., Allen, D., Bauer, D., Bras, B., Piwonka, T. and Wolff, E. (2005), “Environmentally benign manufacturing: observations from Japan, Europe and the United States”, Journal of Cleaner Production, Vol. 13 No. 1, pp. 1-17.
42. Handfield, R.B., Walton, S.V., Seegers, L.K. and Melnyk, S.A. (1997), “Green value chain practices in the furniture industry”, Journal of Operations Management, Vol. 15 No. 4, pp. 293-315.
43. Harzing, A.W. and Wal, R.V.D. (2007), “Google scholar as a new source for citation analysis”, Ethics in Science and Environmental Politics, Vol. 8 No. 1, pp. 1-13.
44. Hauschild, M., Jeswiet, J. and Alting, L. (2005), “From life cycle assessment to sustainable production: status and perspectives”, CIRP Annals-Manufacturing Technology, Vol. 54 No. 2, pp. 1-21.
45. Hillary, R. and Thorsen, N. (1999), “Regulatory and self-regulatory measures as routes to promote cleaner production”, Journal of Cleaner Production, Vol. 7 No. 1, pp. 1-11.
46. Holdgate, M. (1987), “The reality of environmental policy”, Journal of the Royal Society of Arts, Vol. 135 No. 5368, pp. 310-327.
47. Ilgin, M.A. and Gupta, S.M. (2010), “Environmentally conscious manufacturing and product recovery (ECMPRO): a review of the state of the art”, Journal of Environmental Management, Vol. 91 No. 3, pp. 563-591.
48. Jawahir, I.S. and Dillon, O.W. Jr (2007), “Sustainable manufacturing processes: new challenges for developing predictive models and optimization techniques”, Proceedings of the 1st International Conference on Sustainable Manufacturing (SM1), Montreal, October 18-19.
49. Jayal, A.D., Badurdeen, F., Dillon, O.W. Jr and Jawahir, I.S. (2010), “Sustainable manufacturing: modeling and optimization challenges at the product, process and system levels”, CIRP Journal of Manufacturing Science and Technology, Vol. 2 No. 3, pp. 144-152.
50. Jeswiet, J. and Hauschild, M. (2005), “EcoDesign and future environmental impacts”, Materials and Design, Vol. 26 No. 7, pp. 629-634.
51. Joshi, K., Venkatachalam, A., Jaafar, I.H. and Jawahir, I.S. (2006), “A new methodology for transforming 3R concept into 6R for improved sustainability: analysis and case studies in product design and manufacturing”, Proceedings of IV Global Conference on Sustainable Product Development and Life Cycle Engineering: Sustainable Manufacturing, Sao Paulo, October 3-6.
52. Jovane, F., Yoshikawa, H, Alting, L., Boër, C.R., Westkamper, E., Williams, D. and Paci, AM. (2008), “The incoming global technological and industrial revolution towards competitive sustainable manufacturing”, CIRP Annals-Manufacturing Technology, Vol. 57 No. 2, pp. 641-659.
53. Kalampoukas, G. and Dervakos, GA (1996), “Process optimization for clean manufacturing: supercritical fluid extraction for b-carotene production”, Computers & Chemical Engineering, Vol. 20, Supplement 2, pp. S1383-S1388.
54. Karp, H.R. (2005), “Green suppliers network: strengthening and greening the manufacturing supply base”, Environmental Quality Management, Vol. 15 No. 2, pp. 37-46.
55. Klocke, F., Schulz, A, Gerschwiler, K. and Rehse, M. (1998), “Clean manufacturing technologies-the competitive edge of tomorrow?”, Journal for Manufacturing Science and Production, Vol. 1 No. 2, pp. 77-86.
56. Klöpffer, W. (1997), “Life cycle assessment”, Environmental Science and Pollution Research, Vol. 4 No. 4, pp. 223-228.
57. Knight, P. and Jenkins, J.O. (2009), “Adopting and applying eco-design techniques: a practitioners perspective”, Journal of Cleaner Production, Vol. 17 No. 5, pp. 549-558.
58. Kowey, B.N. (1990), “An example of planning for sustainable production: the dry-cell battery problem”, master’ thesis, School of Community and Regional Planning, The University of British Columbia, Vancouver, CA, September.
59. Larrabee, G.B. (1993), “Environmentally responsible manufacturing”, International Symposium on Semiconductor Manufacturing, Austin, TX, pp. 215-240.
60. Lewis, J. (1991), “The games children play - even Verminous Skumm is made of recycled material”, EPA Journal, Vol. 17, p. 25.
61. Li, C, Liu, F. and Wang, Q. (2010), “Planning and implementing the green manufacturing strategy: evidences from western China”, Journal of Science and Technology Policy in China, Vol. 1 No. 2, pp. 148-162.
62. Liu, F., Zhang, H. and Cheng, X.H. (1999), “A decision making framework model for green manufacturing and the case study”, Journal of Mechanical Engineering, Vol. 35 No. 5, pp. 11-15.
63. Liu, F., Zhang, H., Wu, P. and Cao, H.J. (2002), “A model for analyzing the consumption situation of product material resources in manufacturing systems”, Journal of Materials Processing Technology, Vol. 122 Nos 2/3, pp. 201-207.
64. Madu, C.N. (2001), Handbook of Environmentally Conscious Manufacturing, Kluwer Academic Publishers, Boston, MA.
65. Martin, S., Cohen, J. and Martin, M. (2004), “Opportunities for sustainable development in the learning and skills sector: a policy analysis”, Learning and Skills Development Agency (LSDA) Report, London.
66. Matysiak, L.M. (1993), “Cost-benefit analysis for design of environmentally conscious manufacturing”, Second International Congress on Environmentally Conscious Manufacturing, Arlington, VA.
67. Mbohwa, C. (2002), “Green manufacturing/cleaner production in Zimbabwe: learning from Japanese experiences”, a paper presented to the Africa Japan Forum February Session, February 16, Africa Japan Forum February Session, available at: Error! Hyperlink reference not valid. ¼ Error! Hyperlink reference not valid. (accessed December 25, 2013).
68. Melnyk, S.A. and Handfield, R.B. (1995), “Environmentally responsible manufacturing”, APICS Conference, Orlando, FL.
69. Melnyk, S.A. and Smith, R.T. (1996), Green Manufacturing, Society of Manufacturing Engineers Publication, Dearborn, MI.
70. Melnyk, S.A., Handfield, R.B., Calantone, R.J. and Curkovic, S. (2001), “Integrating environmental concerns into the design process: the gap between theory and practice”, IEEE Transactions on Engineering Management, Vol. 48 No. 2, pp. 189-208.
71. Melnyk, S.A., Sroufez, R.P., Montabon, F.L. and Hinds, T.J. (2001), “Green MRP: identifying the material and environmental impacts of production schedules”, International Journal of Production Research, Vol. 39 No. 8, pp. 1559-1573.
72. Nagaraj, H.S., Owens, B.L. and Miller, R.J. (1989), “Particulate generation in devices used in clean manufacturing”, Particles in Gases and Liquids, Vol. 1, pp. 283-293.
73. O'Brien, C., (2002), “Global manufacturing and the sustainable economy”, International Journal of Production Research, Vol. 40 No. 15, pp. 3867-3877.
74. Rao, R.V. (2008), “Evaluation of environmentally conscious manufacturing programs using multiple attribute decision-making methods”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 222 No. 3, pp. 441-451.
75. Rao, R.V. (2009), “An improved compromise ranking method for evaluation of environmentally conscious manufacturing programs”, International Journal of Production Research, Vol. 47 No. 16, pp. 4399-4412.
76. Reich-Weiser, C., Vijayaraghavan, A. and Dornfeld, D. (2010), “Appropriate use of green manufacturing frameworks”, available at: Error! Hyperlink reference not valid.
77. Richards, D.J. (1994), “Environmentally conscious manufacturing”, World Class Design to Manufacture, Vol. 1 No. 3, pp. 15-22.
78. Ross, M. (1992), “Efficient energy use in manufacturing”, Proc. of the National Academy of Sciences of the United States of America, Vol. 89 No. 3, pp. 827-831.
79. Rusinko, C.A. (2007). “Green manufacturing: an evaluation of environmentally sustainable manufacturing practices and their impact on competitive outcomes”, Engineering Management, IEEE Transactions on, Vol. 54 No. 3, pp. 445-454.
80. Sangwan, K.S. (2011), “Development of a multi criteria decision model for justification of green manufacturing systems”, International Journal of Green Economics, Vol. 5 No. 3, pp. 285-305.
81. Sarkis, J. (1995), “Manufacturing strategy and environmental consciousness”, Technovation, Vol. 15 No. 2, pp. 79-97.
82. Schiederig, T., Tietze, F. and Herstatt, C. (2011), “What is green innovation? A quantitative literature review”, Working Papers No. 63/Technologies and Innovations management, Technische Universität Hamburg, Harburg.
83. Schmitt, R.W. (1994), “Do manufacturing technologies need federal policies?”, Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, Vol. 12 No. 4, pp. 2721-2726.
84. Schmitter, D.N, (2012), “A study of the barriers to the implementation of environmentally responsible practices in Indiana manufacturing businesses”, Master's Thesis, Purdue University, West Lafayette, IN, available at: Error! Hyperlink reference not valid. (accessed February 1, 2013).
85. Seidel, M., Seidel, R., Tedford, D., Cross, R., Wait, L. and Hämmerle, E. (2009), “Overcoming barriers to implementing environmentally benign manufacturing practices: strategic tools for SMEs”, Environmental Quality Management, Vol. 18 No. 3, pp. 37-55.
86. Shi, H., Peng, S.Z., Liu, Y. and Zhong, P. (2008), “Barriers to the implementation of cleaner production in Chinese SMEs: government, industry and expert stakeholders’ perspectives”, Journal of Cleaner Production, Vol. 16 No. 7, pp. 842-852.
87. Siaminwe, L., Chinsembu, K.C. and Syakalima, M. (2005), “Policy and operational constraints for the implementation of cleaner production in Zambia”, Journal of Cleaner Production, Vol. 13 Nos 10-11, pp. 1037-1047.
88. Stephen, B., Maureen, H. and Kathryn, T. (1990), Investing in Sustainable Manufacturing: A Study of the Credit Needs of Chicago’s Metal Finishing Industry, Center for Neighborhood Technology and the Woodstock Institute (312/427-8070), Chicago, IL.
89. Tan, X.C., Liu, F., Cao, H.J. and Zhang, H. (2002), “A decision-making framework model of cutting fluid selection for green manufacturing and a case study”, Journal of Material Processing Technology, Vol. 129 Nos 1/3, pp. 467-470.
90. Tan, X.C., Wang, Y.Y., Gu, B.H., Mu, Z.K. and Yang, C, (2011), “Improved methods for production manufacturing processes in environmentally benign manufacturing”, Energies, Vol. 4 No. 9, pp. 1391-1409.
91. Thumann, A. (1988), Life Cycle Costing, Energy Management And Control Systems Handbook, in Payne, F.W. and McGowan, J.J. (Eds), The Fairmont Press, Springer, pp. 277-304.
92. Times of India (2013), “Go figure”, Bennett Coleman and Co. Ltd., New Delhi, Times of India, June 9, p. 13.
93. United Nations Environmental Programme (1994), “Montreal protocol on substances that deplete the ozone layer: 1994 report of the technology and economics assessment panel”, US EPA Identification - EPA/430/K94/023, United Nations Environmental Programme, Nairobi.
94. US Department of Commerce (2009), available at: Error! Hyperlink reference not valid. (accessed January 12, 2014).
95. Veleva, V. and Ellenbecker, M. (2001), “Indicators of sustainable production: framework and methodology”, Journal of Cleaner Production, Vol. 9 No. 6, pp. 519-549.
96. Webster, J. and Watson, R.T. (2002), “Analyzing the past to prepare for the future: writing a literature review”, Management Information Systems Quarterly, Vol. 26 No. 2, pp. 13-23.
97. Westkämper, E. (2000), “Life cycle management and assessment: approaches and visions towards sustainable manufacturing”, CIRP Annals-Manufacturing Technology, Vol. 49 No. 2, pp. 501-526.
98. Woodward, D.G. (1997), “Life cycle costing-theory, information acquisition and application”, International Journal of Project Management, Vol. 15 No. 6, pp. 335-344.
99. Yan, J. and Feng, C. (2013), “Sustainable design-oriented product modularity combined with 6R concept: a case study of rotor laboratory bench”, Clean Technologies and Environmental Policy, Vol. 16 No. 1, pp. 95-109.
100. Zhang, H.C., Kuo, T.C. and Lu, H. (1997), “Environmentally conscious design and manufacturing: a state-of-the-art survey”, Journal of Manufacturing Systems, Vol. 16 No. 5, pp. 352-371.
101. Allwood, J. (2005), “Sustainable manufacturing seminar series”, available at: Error! Hyperlink reference not valid., (accessed December 26, 2009).
102. O’Brien, C. (1999), “Sustainable production-a new paradigm for a new millennium”, International Journal of Production Economics, Vols 60/61, pp. 1-7.