Suppressing tool chatter with novel multi-layered nanostructures of carbon based composite coatings

Journal of Materials Processing Technology

Volumn 223, Issue , 2015, Pages 292-298

  Fu, Qilin ^a   Lorite, Gabriela Simone ^b   Rashid, Md Masud Ur ^a   Selkälä, Tuula ^b   Uusitalo, Juha ^b   Toth, Geza ^b   Kordas, Krisztian ^b   Österlind, Tomas ^a   Nicolescu, Cornel Mihai ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b UNIVERSITY OF OULU   (Finland)

Author keywords

Internal friction damping; Metal matrix composites; Milling; Nano structures; Plasma enhanced chemical vapour deposition (PECVD); Tool regenerative chatter

Indexed keywords

CARBON; COMPOSITE COATINGS; DAMPING; METALLIC MATRIX COMPOSITES; MILLING (MACHINING); MODAL ANALYSIS; MULTILAYERS; NANOSTRUCTURES; NITROGEN COMPOUNDS; SCANNING ELECTRON MICROSCOPY;

CARBON BASED COMPOSITES; CRITICAL STABILITY; NANOSTRUCTURED MULTILAYERS; PLASMA ENHANCED CHEMICAL VAPOUR DEPOSITION; PLASMA ENHANCED CHEMICAL VAPOUR DEPOSITIONS (PECVD); REGENERATIVE CHATTERS; REGENERATIVE TOOL CHATTER; SCANNING ELECTRONS;

PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION;

EID: 84929497633     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2015.03.043     Document Type: Article

References (36)

1. 3M E.M.M. Division, 3M™ Viscoelastic Damping Polymers 112 • 130 2012
2. J. Alami, K. Sarakinos, F. Uslu, and M. Wuttig On the relationship between the peak target current and the morphology of chromium nitride thin films deposited by reactive high power pulsed magnetron sputtering J. Phys. D: Appl. Phys. 42 2009 015304
3. Y. Altintas, M. Eynian, and H. Onozuka Identification of dynamic cutting force coefficients and chatter stability with process damping CIRP Ann. Manufact. Technol. 57 2008 371 374
4. Andreassen, L., Holmen, H., Rosdal, G., Rosdal, I., 1974. Adjustable damping device, in particular for boring bars and the like. Google Patents.
5. L.L. Beranek, and I.L. Vér Noise and Vibration Control Engineering: Principles and Applications 1992 A Wiley Interscience Publication
6. M.S. Blanter, I.S. Golovin, H. Neuhäuser, and H.-R. Sinning Internal Friction in Metallic Materials: A Handbook 2007 Springer
7. H. Boden, U. Carlsson, R. Glav, H.-P. Wallin, and M. Åbom Sound and Vibration 2003 The Marcus Wallenberg Laboratory KTH Sweden, Stockholm, Sweden
8. L. Daghini Improving Machining System Performance through Designed-in Damping: Modelling, Analysis and Design Solutions 2012 KTH
9. D.J. Ewins Modal Testing: Theory and Practice 1986 Research Studies Press Letchworth
10. Q. Fu, D. Lundin, and C. Nicolescu Anti-vibration engineering in internal turning using a carbon nanocomposite damping coating produced by PECVD process J. Mater. Eng. Perform. 2013 1 12
11. Q. Fu, A. Rashid, and C.M. Nicolescu Improving machining performance against regenerative tool chatter through adaptive normal pressure at the tool clamping interface J. Mach. Eng. 13 2013 93 105
12. G. Galilei Dialogues Concerning Two New Sciences 1914 Dover
13. J.P. Gurney, and S.A. Tobias A graphical method for the determination of the dynamic stability of machine tools Int. J. Tool Des. Res. 1 1961 148 156
14. Harms A., Denkena B., and Lhermet N. Tool adaptor for active vibration control in turning operations 9th International Conference on New Actuators Breman, Germany 2004
15. J.H. Ko Time domain prediction of milling stability according to cross edge radiuses and flank edge profiles Int. J. Mach. Tools Manuf. 89 February 2015 74 85
16. S. Kosaraju, V.G. Anne, and V.R. Ghanta Effect of rake angle and feed rate on cutting forces in an orthogonal turning process Trends in Mechanical and Industrial Engineering (ICTMIE'2011) Bangkok 2011
17. Kouznetsov, V., Nicolescu, M., Meza, O., Hemmingsson, L., 2013. Method for enhancing dynamic stiffness. Google Patents.
18. D. Li, and A. Herrmann Viscoelastic Analysis of Rubber with Nanoindentation DMA 2014 NANOVEA Irvine, CA, USA
19. W. Lin The study of high speed fine turning of austenitic stainless steel J. Achiev. Mater. Manuf. Eng. 27 2008 191 194
20. D. Lundin, and S. Kostas An introduction to thin film processing using high-power impulse magnetron sputtering J. Mater. Res. 27 2012 13
21. D. Malogi, A. Gupta, and G. Kathawate Center impedance method for damping measurement Adv. Acoust. Vib. 2009 2010
22. Z. Mei, S. Yang, H. Shi, S. Chang, and K. Ehmann Active chatter suppression by on-line variation of the rake and clearance angles in turning - principles and experimental investigations Int. J. Mach. Tools Manuf. 34 1994 981 990
23. M.M. Nigm A method for the analysis of machine tool chatter Int. J. Mach. Tool Des. Res. 21 1981 251 261
24. W.C. Oliver, and G.M. Pharr Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology J. Mater. Res. 19 2004 3 20
25. E. Ozlu, and E. Budak Analytical modeling of chatter stability in turning and boring operations - Part II: experimental verification J. Manuf. Sci. Eng. 129 2007 733
26. K. Rama Kotaiah, J. Srinivas, K.J. Babu, and K. Srinivas Prediction of optimal cutting states during inward turning: an experimental approach Mater. Manuf. Process. 25 2010 432 441
27. A. Rashid, and C.M. Nicolescu Design and implementation of tuned viscoelastic dampers for vibration control in milling Int. J. Mach. Tools Manuf. 48 2007 1036 1053
28. SAE Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar. Tech. Rep. J1637 2013 SAE Troy, MI, USA
29. H.A. Sahrim, A.T. Mou'ad, S.Y. Yahya, and R. Rozaidi Reinforced Thermoplastic Natural Rubber (TPNR) Composites with Different Types of Carbon Nanotubes (MWNTS) 2011
30. R. Schaller Metal matrix composites: a smart choice for high damping materials J. Alloys Compd. 355 2003 131 135
31. Smith, J.D., 1966. Vibration absorbing device for machine tools. Google Patents.
32. S. Smith, and J. Tlusty Stabilizing chatter by automatic spindle speed regulation CIRP Ann. Manufact. Technol. 41 1992 433 436
33. F.W. Taylor On the Art of Cutting Metals 1907
34. S.A. Tobias, and W. Fishwick Theory of Regenerative Machine Tool Chatter 1958 The Engineer
35. Y. Wang, M. Ludwigson, and R. Lakes Deformation of extreme viscoelastic metals and composites Mater. Sci. Eng. A 370 2004 41 49
36. Y. Yang, W. Dai, and Q. Liu Design and implementation of two-degree-of-freedom tuned mass damper in milling vibration mitigation J. Sound Vib. 335 January 2015 78 88