Low-carbon conceptual design based on product life cycle assessment

International Journal of Advanced Manufacturing Technology

Volumn 81, Issue 5-8, 2015, Pages 863-874

  He, Bin ^a   Tang, Wen ^a   Wang, Jun ^a   Huang, Shan ^a   Deng, Zhongqiang ^a   Wang, Yan ^b  

^a SHANGHAI UNIVERSITY   (China)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Carbon emission; Carbon footprint; Conceptual design; Green manufacturing; Low carbon; Low carbon manufacturing; Product life cycle assessment

Indexed keywords

CARBON FOOTPRINT; COLD HEADING; CONCEPTUAL DESIGN; ECODESIGN; ENVIRONMENTAL IMPACT; GREENHOUSE GASES; PRODUCT DESIGN; SENSITIVITY ANALYSIS;

CARBON EMISSIONS; GREEN MANUFACTURING; LOW CARBON; LOW-CARBON MANUFACTURING; PRODUCT LIFE CYCLES;

LIFE CYCLE;

EID: 84929430611     PISSN: 02683768     EISSN: 14333015     Source Type: Journal    
DOI: 10.1007/s00170-015-7253-5     Document Type: Article

References (38)

1. Intergovernmental Panel on Climate Change (IPCC) (2006) IPCC Fourth assessment report: climate change 2007; Working Group III report “Mitigation of climate change” 447–496
2. United States Global Change Research Program (2009) Global climate change impacts in the United States. Cambridge University Press, Cambridge
3. U. S. Energy Information Administration (2006) “Manufacturing Energy Consumption Survey”. http://www.eia.gov/consumption/manufacturing/
4. United Nations (1998) Kyoto protocol to the United Nations framework on convention on climate change
5. Wackernagel M, Rees WE (1996) Our ecological footprint: reducing human impact on the earth. Gabriola Press New Society Publishing, B.C.
6. Choi TM (2013) Carbon footprint tax on fashion supply chain systems. Int J Adv Manuf Technol 68(1–4):835–847
7. PAS 2050 (2011) The Guide to PAS2050-2011, Specification for the assessment of the life cycle greenhouse gas emissions of goods and services. British Standards Institution
8. Brogaard LK, Damgaard A, Jensen MB, Barlaz M, Christensen TH (2014) Evaluation of life cycle inventory data for recycling systems. Resour Conserv Recy 87:30–45
9. Umeda Y, Takata S, Kimura F, Tomiyama T, Sutherland JW, Kara S, Herrmann C, Duflou JR (2012) Toward integrated product and process life cycle planning—an environmental perspective. CIRP Ann–Manuf Techn 61(2):681–702
10. Kellens K, Dewulf W, Overcash M, Hauschild MZ, Duflou JR (2012) Methodology for systematic analysis and improvement of manufacturing unit process life cycle inventory (UPLCI) CO2PE! initiative (cooperative effort on process emissions in manufacturing). Part 1: methodology description. Int J Life Cycle Ass 17(1):69–78
11. ISO/TS 14067 (2013) Greenhouse gases—carbon footprint of products—requirements and guidelines for quantification and communication. International Organization for Standardization, Geneva
12. ISO14040 (2006) Environmental management-life cycle assessment: principles and framework. International Organization for Standardization, Geneva
13. Hauschild M, Jeswiet J, Alting L (2005) From life cycle assessment to sustainable production: status and perspectives. CIRP Ann-Manuf Techn 54(2):1–21
14. Zarandi MHF, Mansour S, Hosseinijou SA, Avazbeigi M (2011) A material selection methodology and expert system for sustainable product design. Int J Adv Manuf Technol 57(9–12):885–903
15. Song JS, Lee KM (2010) Development of a low-carbon product design system based on embedded GHG emissions. Resour Conserv Recycl 54(9):547–556
16. Kuo TC (2013) The construction of a collaborative framework in support of low carbon product design. Rob Comput Integr Manuf 29(44):174–183
17. Jeswiet J, Hauschild M (2008) Market forces and the need to design for the environment. Int J Sust Manuf I 1(1-2):41–57
18. Alsaffar AJ, Haapala KR, Kim KY, Kremer GEO (2012) A process-based approach for cradle-to-gate energy and carbon footprint reduction in product design. In Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference, Paper No.MSEC2012-7405, pp. 1141–1150
19. Devanathan S, Ramanujan D, Bernstein WZ, Zhao F, Ramani K (2010) Integration of sustainability into early design through the function impact matrix. Trans ASME: J Mech Des 132(8):1–8
20. Li C, Tang Y, Cui L, Li P (2014) A quantitative approach to analyze carbon emissions of CNC-based machining systems. J Intell Manuf. doi:10.1007/s10845-013-0812-4
21. Jiao RJ, Xu Q, Du J, Zhang YG, Helander M, Khalid HM, Helo P, Ni C (2007) Analytical affective design with ambient intelligence for mass customization and personalization. Int J Flexible Manuf Syst 19(4):570–595
22. Elhedhli S, Merrick R (2012) Green supply chain network design to reduce carbon emissions. Transp Res Part D 17:370–379
23. Giurco D, Petrie JG (2007) Strategies for reducing the carbon footprint of copper: new technologies, more recycling or demand management. Miner Eng 20(9):842–853
24. Ball PD, Evans S, Levers A, Ellison D (2009) Zero carbon manufacturing facility-towards integrating material, energy, and waste process flows. Proc IMechE Part B: J Eng Manuf 223(9):1085–1096
25. He B, Deng ZQ, Huang S, Wang J (2014) Application of unascertained number for the integration of carbon footprint in conceptual design. Proc IMechE Part B: J Eng Manuf. doi:10.1177/0954405414539495
26. He B, Song W, Wang YG (2013) A feature-based approach towards an integrated product model in intelligent design. Int J Adv Manuf Technol 69:15–30
27. He B, Feng PE (2013) Guiding conceptual design through functional space exploration. Int J Adv Manuf Technol 66:1999–2011
28. Reap J, Roman F, Duncan S, Bras B (2008) A survey of unresolved problems in life cycle assessment. Int J Life Cycle Assess 13(5):374–388
29. Huijbregts M (2002) Uncertainty and variability in environmental lifecycle assessment. Int J Life Cycle Assess 7(3):173
30. Weissman A, Ananthanarayanan A, Gupta SK, Sriram RD (2010) A systematic methodology for accurate design-stage estimation of energy consumption for injection molded parts. In Proceedings of the ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Paper No. DETC2010-28889, pp 1–13
31. Pahl G, Beitz W (1996) Engineering design: a systematic approach. Springer, London
32. Altshuller G (1999) The innovation algorithm, TRIZ systematic innovation and technical creativity. Technical Innovation Centre Inc., Worcester
33. Suh NP (2001) Axiomatic design: advances and applications. Oxford University Press, New York
34. Bao H, Liu G, Wang J (2013) Optimal design of products with low-carbon based on carbon footprint analysis. J Comp-Aided Des Comp Grap 25(2):264–272
35. IPCC Guidelines for National Greenhouse Gas Inventories (2006) URL: http://www.ipcc-nggip.iges.or.jp/public/2006gl/index.html
36. NDRC. Baseline emission factors for regional power grids in China. URL: http://cdm.ccchina.gov.cn/Detail.aspx?-newsId=41386&TId=3
37. He C (2012) Research on low-carbon development of urban traffic in Shanghai based on LMDI model. Thesis of Hefei University of Technology, Hefei, China
38. Lin DS, Yang YS, Cao GR, Tian Y, Ruan ZY, An GP (1998) Forging machinery and finite element analysis. Beijing University of Technology Press, Beijing