On the boundary conditions in multi-phase flow through the piston ring-cylinder liner conjunction

Tribology International

Volumn 90, Issue , 2015, Pages 164-174

  Shahmohamadi, H ^a   Mohammadpour, M ^a   Rahmani, R ^a   Rahnejat, H ^a   Garner, C P ^a   Howell Smith, S ^b  

^a LOUGHBOROUGH UNIVERSITY   (United Kingdom)

^b CAPRICORN AUTOMOTIVE LTD   (United Kingdom)

Author keywords

Cavitation; Friction; Mixed multi phase regime of lubrication; Zero reverse inlet boundary

Indexed keywords

BOUNDARY CONDITIONS; CAVITATION; FRICTION; MULTIPHASE FLOW; NAVIER STOKES EQUATIONS; TRIBOLOGY;

COMPATIBILITY CONDITIONS; COMPRESSION RINGS; CYLINDER LINERS; INLET BOUNDARY; LUBRICANT FILMS; NAVIER STOKES SOLUTION; POTENTIAL FLOW ANALYSIS; VAPOUR TRANSPORT;

INLET FLOW;

EID: 84929087270     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2015.04.025     Document Type: Article

References (39)

1. R. Gohar, and H. Rahnejat Fundamentals of tribology 2008 Imperial College Press London, UK ISBN: 10-1-84816-184-0
2. D.E. Richardson Review of power cylinder friction for diesel engines Trans ASME, J Tribol 122 4 2000 506 519
3. C.E. Baker, S. Theodossiades, H. Rahnejat, and B. Fitzsimons Influence of in-plane dynamics of thin compression rings on friction in internal combustion engines J Eng Gas Turbines Power 134 9 2012 092801
4. T. Tian Dynamic behaviours of piston rings and their practical impact; Part 1: ring flutter and ring collapse and their effects on gas flow and oil transport Proc Inst Mech Eng, Part J: J Eng Tribol 216 2002 209 227
5. R. Rahmani, S. Theodossiades, H. Rahnejat, and B. Fitzsimons Transient elastohydrodynamic lubrication of rough new or worn piston compression ring conjunction with an out-of-round cylinder bore Proc IMechE, Part J: J Eng Tribol 226 4 2012 284 305
6. I. Sherrington Measurement techniques for piston-ring tribology. Tribol Dyn Engine Powertrain: Fundam, Appl Future Trends 2010 387
7. Furuhama S, Sasaki S. New device for the measurement of piston frictional forces in small engines, SAE, Paper no. 831284; 1983
8. M. Gore, M. Theaker, S. Howell-Smith, H. Rahnejat, and P.D. King Direct measurement of piston friction of internal-combustion engines using the floating-liner principle Proc IMechE, Part D: J Automob Eng 228 3 2014 344 354
9. M.T. Ma, I. Sherrington, and E.H. Smith Implementation of an algorithm to model the starved lubrication of a piston ring a distorted bores: prediction of oil flow and onset of gas blow-by Proc IMechE, Part J: J Eng Tribol 210 1996 29 44
10. N. Morris, R. Rahmani, H. Rahnejat, P.D. King, and B. Fitzsimons The influence of piston ring geometry and topography on friction Proc IMechE, Part J: J Eng Tribol 227 2 2012 141 153
11. W.W.F. Chong, M. Teodorescu, and N.D. Vaughan Cavitation induced starvation for piston-ring/liner tribological conjunction. Tribol Int 44 4 2011 483 497
12. S.H.G. Elrod A cavitation algorithm Trans ASME, J Lubr Technol 103 3 1981 350 354
13. B. Jakobsson, and L. Floberg The finite journal bearing considering vaporisation 1957 Trans. of Chalmers University of Tech Gothenburg, Sweden
14. K.O. Olsson "Cavitation in dynamically loaded bearings" 1965 Trans. of Chalmers University of Technology
15. F. Sahlin, A. Almqvist, R. Larsson, and S. Glavatskih A cavitation algorithm for arbitrary lubricant compressibility Tribol Int 40 8 2007 1294 1300
16. H. Shahmohamadi, R. Rahmani, H. Rahnejat, C.P. Garner, and P.D. King Thermo-mixed hydrodynamics of piston compression ring conjunction Tribol Lett 51 3 2013 323 340
17. N. Tipei Boundary conditions of a viscous flow between surfaces with rolling and sliding motion Trans ASME, J Lubr Technol 90 1 1968 8 16
18. M. Mohammadpour, P.M. Johns-Rahnejat, H. Rahnejat, and R. Gohar Boundary conditions for elastohydrodynamics of circular point contacts Tribol Lett 53 1 2014 51 70
19. P.M. Johns-Rahnejat, and R. Gohar Measuring contact pressure distributions under elastohydrodynamic point contacts Tribotest 1 1 1994 33 53
20. S.D. Haddad, and K.-T. Tian Analytical study of offset piston and crankshaft designs and the effect of oil film on piston slap excitation in a diesel engine Mech Mach Theory 30 2 1995 271 284
21. H. Rahnejat Multi-body dynamics: vehicles, machines and mechanisms 1998 Professional Engineering Publishing Bury St Edmunds 0768002699
22. A. Bin Chik, and H. Fessler Radial pressure exerted by piston rings J Strain Anal Eng Des I 2 1966 165 171
23. J.A. Greenwood, and J.H. Tripp The contact of two nominally flat rough surfaces Proc IMechE 185 1970-1971 625 634
24. F.M. White Viscous fluid flow 2nd Edition 1991 McGraw-Hill
25. I. Senocak, and W. Shyy Interfacial dynamics-based modelling of turbulent cavitating Flows, Part-1: Model development and steady-state computations Int J Numer Methods Fluids 44 2004 975 995
26. Singhal AK, Li HY, Athavale MM, Jiang Y. Mathematical basis and validation of the full cavitation model ASME FEDSM'01, New Orleans, Louisiana; 2001.
27. D. Dowson, and G.R. Higginson A numerical solution to elastohydrodynamic problem J Mech Eng Sci 1 1 1959 6 15
28. N. Morris, R. Rahmani, H. Rahnejat, P.D. King, and B. Fitzsimons Tribology of piston compression ring conjunction under transient thermal mixed regime of lubrication Tribol Int 59 2013 248 258
29. L. Houpert New results of traction force calculations in elastohydrodynamic contacts Trans ASME, J Tribol 107 1985 241 248
30. Manninen M, Taivassalo V, Kallio S. On the mixture model for multiphase flow/VTT publications 288 technical research centre of Finland; 1996.
31. Snyder DO, Koutsavdis EK, Anttonen JSR. Transonic store separation using unstructured CFD with dynamic meshing. Technical Report AIAA-2003-3913, 33th AIAA Fluid Dynamics Conference and Exhibition, American Institute of Aeronautics and Astronautics; 2003
32. G. Birkhoff, and D. Hays Free boundaries in partial lubrication J Math Phys 42 2 1963 126 138
33. B.J. Briscoe, and D.C.B. Evans The shear properties of Langmuir-Blodgett layers Proc RSoc, Ser A.: Math Phys Sci 380 1779 1982 389 407
34. M. Mohammadpour, S. Theodossiades, H. Rahnejat, and T. Saunders Non-Newtonian mixed elastohydrodynamics of differential hypoid gears at High Loads Meccanica 49 5 2014 1115 1138
35. N.W. Bolander, B.D. Steenwyk, F. Sadeghi, and G.R. Gerber Lubrication regime transitions at the piston ring-cylinder liner interface Proc IMechE. Part J: J EngTribol 219 2005 19 31
36. P.C. Mishra, S. Balakrishnan, and H. Rahnejat Tribology of compression ring-to-cylinder contact at reversal Proc IMechE, Part J: J Eng Tribol 222 7 2008 815 826
37. Arcoumanis, C, Duszynski, M, Flora, H, Ostovar, P, Development of a piston-ring lubrication test-rig and investigation of boundary conditions for modelling lubricant film properties. SAE Technical Paper 952468; 1995
38. J.C. Coyne, and H.G. Elrod "Conditions for the rupture of a lubricating fil - Part II: new boundary conditions for Reynolds equation Trans ASME, J Tribol 93 1 1971 156 167
39. Furuhama, S, Hiruma, M, Tsuzita, M. Piston ring motion and its influence on engine tribology. SAE Technical Paper790860, 1979