Fundamentals of tribology

Fundamentals of Tribology

Volumn , Issue , 2008, Pages 1-391

  Gohar, R ^a   Rahnejat, H ^b  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

^b LOUGHBOROUGH UNIVERSITY   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER AIDED DESIGN; STUDENTS; TRIBOLOGY;

APPROXIMATE SOLUTION; ENGINEERING UNDERGRADUATES; EXPERT WITNESS; LUBRICATION MECHANISM; MATHEMATICAL PRINCIPLE; PRACTICAL PROBLEMS; PRACTICING ENGINEERS; UNDERGRADUATE COURSES;

PROBLEM SOLVING;

EID: 84967361874     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1142/P553     Document Type: Book

References (157)

1. Da Vinci, L., Madrid, M. S. I (BNM), fol. 20V, Ca. 1490-1495.
2. Stribeck, R., Die Wesentliechen ichen Eigenschaften Gleit und Rollen Lager or: Ball bearings for various loads. Trans. ASME 29 (1907) 420-463.
3. Dowson, D. and Neville, A. Bio-Tribology and Bio-Mimetics in the Operating Environment, Journal of Engineering Tribology 220, 3 (2006) 333-339.
4. Taylor Hobson Precision Ltd. Exploring Surface Texture (1997).
5. Bhushsan, B. Handbook of Tribology, Materials and Coatings. McGraw Hill (1999).
6. Arnell, R. D., Davies, P. B., Halling, J. and Whomes, T. W. Tribology Principles and Design. Macmillan (1991).
7. Hertz, H. Miscellaneous Papers by H. Hertz. Macmillan, London (1896).
8. Johnson, K. L. Contact Mechanics. Cambridge University Press (1985).
9. Gohar, R. ‘Elastohydrodynamics’ Imperial College Press (2001).
10. Sackfield, A. and Hills, D. Some useful results in the classical Hertz contact problem. Journal of Strain Analysis 18 (1983) 101.
11. Case, J. and Chilver, A. H. Strength of Materials Edward Arnold Ltd. (1959).
12. Arnell, R. D., Davies, P. B., Halling, J. and Whomes, T. W. Tribology Principles and Design. Macmillan (1991).
13. Greenwood, T. A. and Tripp, J. H. The Elastic Contact of Rough Surfaces. Trans ASME Series E (1967) 417.
14. Greenwood, J. A. and Williamson, J. B. P. Contact between nominally flat surfaces. Proc. R. Soc. A 24 (1996) 300.
15. Greenwood, J. A. and Williamson, J. B. P. Contact of nominally flat surfaces. Proc. R. Soc. A 24 (1996) 300.
16. Bhushsan, B. Principles and Applications of Tribology. John Wiley and Sons (1999).
17. Bowden, F. P. and Tabor, D. The Friction and Lubrication of Solids Pt 1. Clarendon Press (1954).
18. Arnell, R. D., Davies, P. B., Halling, J. and Whomes, T. W. Tribology Principles and Design. Macmillan (1991).
19. Bowden, F. P. and Tabor, D. The Friction and Lubrication of Solids Pt 2. Oxford University Press (1964).
20. Halling, J. Introduction to Tribology. Wykham Publications (London) Ltd (1976).
21. Harris, T. A. Rolling Bearing Analysis. John Wiley and Sons (1991).
22. Johnson, K. L. Contact Mechanics. Cambridge University Press (1985).
23. Mavros, G., Rahnejat, H. and King, P. Analysis of handling properties of a tyre based on the coupling of a flexible carcass-belt model with a separate tread incorporating transient-viscoelastic frictional properties. Vehicle System Dynamics 43 (2005) 199-208.
24. Johnson, K. L. 100 years of Hertz contact. Proc. I. Mech. E. 196 (1982) 363-378.
25. Archard, J. F. Contact and rubbing of flat surfaces. J. Appl. Phys. 24 (1953) 981-988.
26. Middleman, S. An Introduction to Fluid Dynamics, John Wiley and Sons Inc NY (1998).
27. Cameron, A. Basic Lubrication Theory, Longman Ltd. (1970).
28. Vogel, H. Physik Z. 22 (1921) 645.
29. Walther, A. and Saseffeld, H., VDI, Forschungshaft (1954) 441.
30. Barus, C. Isothermals isopietics and isometrics in relation to viscosity, American Journal of Science 3rd Series 45 (1893) 87-96.
31. Roelands, C. J. A. Correlation aspects of the viscosity-temperature-pressure relationships of lubricating oils, Druk VRB Kleine der A3-4 Groningen (1966).
32. Houpert, L. New results of traction force calculations in elastohydrodynamic contacts, ASME Journal of Tribology 107 (1985) 241-248.
33. Reynolds, O., Phil. Trans. 177 (1886) 157-244.
34. Middleman, S., An Introduction to Fluid Dynamics, John Wiley & Sons NY (1998).
35. Cameron, A., Principles of Lubrication Longmans (1964).
36. Sommerfeld, A., Zeits. f. Math. U. Phys. 40 (1904) 97-155.
37. Steiber, Das-Schwimmlager, VDI (1933).
38. Gohar, R., Elastohydrodynamics, 2nd ed., Imperial College Press (2001).
39. Hall, L. F. and de Guerin, D. Some characteristics of conventional tilting bearings, I. Mech. Eng. Lubrication Conf. (1957) Paper 82 142-6.
40. Ettles, C. and Cameron, A. Thermal and elastic distortions in thrust bearings, Proc I Mech. Engrs. Lubn. Conf. (1963).
41. Cameron, A. The Principles of Lubrication, Longmans (1966).
42. Pinkus, O. Thermal Aspects of Fluid Film Lubrication, ASME Press NY (1990).
43. Advani and Gohar. The taper-land sector shaped thrust bearing, J. Sci. Tech. 38(2) (1971) 83-90.
44. Lord, R. Notes on the theory of lubrication, Phil Mag. (1918) 1-12.
45. Kettleborough, C. F. An approximate analytical solution for a stepped thrust bearing, Trans ASME 77 (1955) 311-320.
46. Jacobsen, B. and Floberg, L. The rectangular plane thrust bearing. Trans Chalmers University Tech. Gothenburg 203 (1958) Appendix 10 page 42.
47. Sommerfeld, A., Zeits. f. Math. U. Phys. 40 (1904) 97-155.
48. Steiber, Das-Schwimmlager, VDI (1933).
49. Cameron, A., Principles of Lubrication, Longmans (1964).
50. Khonsari, M. M. and Booser, E. R., Applied Tribology, John Wiley & Sons (2001).
51. Arnell, R. D., Davies, P. B., Halling, J. and Whomes, T. W., Tribology Principles and Design, MacMillan (1991).
52. O’Donoghue J. P. and Rowe, W. O., Hydrostatic bearing design, Tribology International (February 1969).
53. Powell, J. E., Moye, M. H. and Dwight, P. R., Fundamental theory and experiments on hydrostatic air bearings, I. Mech. E. Lubrication and Wear Convention (1963).
54. Grassam, N. S. and Powell, J. W., Gas Lubricated Bearings, Butterworths, London (1964).
55. Powell, J. E. The Design of Aerostatic Bearings, The Machinery Publishing Company (1970).
56. Uneeb, M. and Gohar, R., Three dimensional incompresseble flow of a gas through feed holes into an annular space of finite length, Lubrication Science 9 (1997) 142-160.
57. Uneeb, M. and Gohar, R. Sleeve dampers for externally pressurized gas journal bearings, Lubrication Science 9 (1997) 409-434.
58. Cazan, A. Gohar, R. and Safa, M. M. A., Externally pressurized gas bearings in a mixed configuration, J. Multi-Body Dynamics Proc. I Mech. Engrs. 216 (2002) 181-189.
59. Grubin, A. N., Contact stresses in toothed gears and worm gears, Book 30 CSRI for Technology and Mechanical Engineering, Moscow (1949) DSRI Trans, No. 337.
60. Dowson, D. and Higginson, G. R., Journal of Mechanical Engineering Science 4(2), (1962) 121-126.
61. Gohar, R., Elastohydrodynamics, 2nd Ed., Imperial College Press London (2001).
62. Kostreva, M. M., Pressure spikes and stability considerations in EHD models, Trans ASME J. Lub. Tech. 106 (1984) 386-395.
63. Cameron, A. and Gohar, R., Theoretical and experimental studies of the oil film in lubricated point contact, Proc. Roy. A 291 (1966) 520-536.
64. Tolanski, S., An introduction to Interferometry, 4th Ed., Longmans London (1966).
65. Cann, P. H., Hutchinson, J. and Spikes, H. A., The development of a spacer layer imaging method (SLIM) for EHL contacts, Tibol. Trans. 39 (1996) 915-921.
66. Gohar, R., Oil film thickness and friction in EHD point contacts, Trans ASME J. Lub. Tech. 93 (1971).
67. Jalali-Vahid, D., Rahnejat, H. and Gohar, R., J. Phys. D: Appl. Phys. 31 (1998) 2725-2732.
68. Bahadoran, H. and Gohar, R., End closure in EHL line contacts, J. Mech. Eng. Sci. 16 (1974) 276-278.
69. Kushwaha, M., Rahnejat, H. and Gohar, R., Aligned and misaligned contacts of rollers in EHL finite line conjunctions, Proc. I. Mech. E. Part C J. of Mech. Eng. Sci. 216 (2002) 1051-1070.
70. Dowson, D. and Toyoda, A., A central film thickness formula for EHD line contacts Leeds-Lyon Symposium (1978) Leeds (1979) 60-65.
71. Dowson, D. and Higginson, G. R., Proc I Mech. E. 182, 3A (1968) 151-167.
72. Chittenden, R. J., Dowson, D., Dunn J. F. and Taylor, C. M., A theoretical analysis of EHL concentrated contacts Parts I and II, Proc Roy. Soc. Lond. A 387 (1985) 245-269 and 271-295.
73. Johnson, K. L. and Tevaarwerk, J. L., Shear behavior of EHD films, Proc Roy. Soc. Lond A 356 (1977) 215-236.
74. Hirst, W. and Moore, A. G., The effect of temperature and traction in EHL, Phil. Trans. Roy. Soc. A 298 (1980) 215-236.
75. Evans, C. R. and Johnson, K. L., The rheological properties of EHD lubricants, Proc. I. Mech. E. Part C 200 (1986) 303-312.
76. Evans, C. R. and Johnson, K. L., Regimes of traction in EHD lubrication, Proc. I. Mech. E. Part C 200 (1986) 313-324.
77. Crook, A. W., The lubrication of rollers III A, Theoretical Discussion of Friction.
78. Johnson, K. L. and Greenwood, J. A., Thermal analysis of an eyring fluid in elastohydrodynamic traction, Wear 61 (1980) 353-374.
79. Venner, C. H. and ten Napel, W. E., Surface roughness effects in EHL line contact, Trans ASME J. Tribol. 114 (1992) 612-622.
80. Mostofi, A. and Gohar, R., Oil film thickness and pressure distribution in elastohydrodynamic point contacts, J. Mech. Eng. Sci. 24 (1982) 173-182.
81. Rahnejat, H., Computational modelling of problems in contact dynamics, Engineering Analysis, 2 4 (1985).
82. Rahnejat, H. and Gohar, R., The vibrations of radial ball bearings, Proc. Inst. Mech. Engs. Part C, J. Mech. Eng. 199(C) (1985) 181-193.
83. Reeve, J., Cams for Industry, Mechanical Engineering Publications (1997).
84. Koster, M. P., Effect of flexibility of driving shaft on the dynamic behavior of a cam mechanism. Trans. ASME, J. Engng for Industry (May 1975) 595-602.
85. Kushwaha, M. and Rahnejat, H., Transient elastohydrodynamic lubrication of finite line conjunction of cam to follower concentrated contact, J. Phys. D: Appl. Phys. 35 (2002) 2872-2890.
86. Rahnejat, H. Multi-Body Dynamics: Vehicles, Machines and Mechanisms (UK: Professional Engineering Publishing), (USA: Society of Automotive Engineers), (1998).
87. Newmark, N. M., A method of computation for structural dynamics, Trans. ASCE, J. Eng. Mech. 85(EM3), 2094 (1959) 67-94.
88. Timoshenko, S., Young, D. H. and Weaver, Jr. W., Vibration Problems in Engineering, 4th ed, John Wailey and Sons, New York (1974).
89. Balakrishnan, S. and Rahnejat, H., Isothermal transient analysis of piston skirt-to-cylinder wall contacts under combined axial, lateral and tilting motion, J. Phys. D: Appl. Phys. 38 (2005) 787-799.
90. Balakrishnan, S., Howell-Smith, S. and Rahnejat, H., Investigation of reciprocating conformal contact of piston skirt-to-surface modified cylinder liner in high performance engines, Proc. Instn. Mech. Engrs. Part C: J. Mech. Eng. Sci. 219 (2005) 1235-1247.
91. Dwyer-Joyce, R. S. et al., The measurement of liner-piston skirt oil film thickness by an ultrasonic means, Trans. J. Engines, Pap., No. 2006-01-0648, 2006, 348-353.
92. Rahnejat, R., Balakrishnan, S., King, P. D. and Howell-Smith, S., In-cylinder friction reduction using surface finish optimisation Technique, IMechE Part D 220 (2006) 1309-1318 DOI: 10.1243/09544070JAUTO282.
93. Etsion, I., State of the art in laser surface, J. Trib. 1, 1 (2005) 248-253.
94. Dowson, D., Developments in lubrication-the thinning film, J. Phys. D: Appl. Phys. 25 (1992) 334-339.
95. Tanner, et al., MEMS Reliability: Infrastructure, Test Structures, Experiments, and Failure Modes, SANDIA REPORT SAND 2000-0091.
96. Cameron, A., Basic Lubrication Theory, Ellis Horwood Limited (1976).
97. Lifshitz, E. M., The theory of molecular attractive forces between solids, Sov. Phys. JETP 2 (1956) 73-83.
98. Israelachvili, J. N., Intermolecular and Surface Forces, New York: Academic (1992).
99. Atkins, P. W., Physical Chemistry, Oxford University Press, New York, 3rd Edition (1986).
100. Rahnejat, H., Computational modelling of problems in contact dynamics, Engineering Analysis 2(4), (1985).
101. Middleman, S., An Introduction to Fluid Dynamics: Principles of Analysis and Design, John Wiley and Sons, New York (1998).
102. Bergeron, V. et. al., Controlling droplet deposition with polymer additives, Nature 405, 772.
103. Birkhoff, J. and Hays, D. F., Free boundaries in partial lubrication, J. Math. and Phys. 32 (1963) 2.
104. Tipei, N., Boundary conditions of a viscous flow between surfaces with rolling and sliding motions, Trans. ASME J. Lubn. Tech. (January 1968).
105. Bowden, F. P. and Tabor, D., The Friction and Lubrication of Solids, Clarenden Press, Oxford (1950).
106. Bhushan, B., Handbook of Micro/Nanotechnology, 2nd Ed., CRC Press, Boca Raton, Florida (1999).
107. Abraham, F. F., The interfacial density profile of a Leonard - Johns Fluid in contact with a (100) Leonard-Johns wall and its relationship to idealised fluid/wall systems: A Monte-Carlo simulation, J. Chem. Phys. 68(8), (1978) 3713-3716.
108. Chan, D. Y. C. and Horn, R. G., The drainage of thin liquid films between solid surfaces, J. Chem. Phys. 83 (1984) 5311-5324.
109. Henderson, D., Compressibility route to Solvation structure, Mol. Phys. 59(1), (1986) 89-96.
110. Evans, R. and Parry, A. O., Lubricant at interfaces: What can a theorist contribute, J. Phys. Condens. Matter 2 (1990) SA15-32.
111. Al-Samieh, M. F. and Rahnejat, H., Ultra-thin lubricating films under transient conditions, J. Phys. D: Appl. Phys. 34 (2001) 2610-2621.
112. Teodorescu, M., Balakrishnan, S. and Rahnejat, H., Physics of ultra-thin surface films on molecularly smooth surfaces, Proc. Inst. Mech. Engrs., J. Nano-Technology 220(1), (2006) 7-19.
113. Riedo, E., Lévy, F. and Brune, H., Kinetics of capillary condensation in nanoscopic sliding friction, Phys. Rev. Lett. 88 (2002) 185505.
114. Johnson, K. L., Kendall, K. and Roberts, A. D., Surface energy and the contact of elastic solids, Proc. Roy. Soc., Series A 324, 1558 (1971) 301-313.
115. Fuller, K. N. G. and Tabor, D., The effect of surface roughness on the adhesion of elastic solids, Proc. Roy. Soc., Series A 345, 1642 (1975) 327-342.
116. Dowson, D. and Wright, V., Bio-Tribology, Proceedings of the Conference on The Rheology of Lubrication, organised by The Institute of Petroleum, The Institution of Mechanical Engineers and the British Society of Rheology (1973) 81-88.
117. Department of Education and Science, Lubrication (Tribology) Education and Research, A Report on the Present Position and Industry’s Needs, HMSO, London (1966) 1-80.
118. Alexander, R. McN, Jayes, A. S., Maloiy, G. M. O. and Wathuta, E. M., Allometry of the limb bones of mammals from shrews to elephants, J. Zool., Lond. 189 (1979) 305-314.
119. Alexander, R. McN, Animal Mechanics, Sidgwick & Jackson, London (1968).
120. Calow, L. J. and Alexander, R. McN., A mechanical analysis of a hind leg of a frog, J. Zool., Lond. 171 (1973) 293-321.
121. Alexander, R. McN., The mechanics of jumping by a dog (Canis familiaris), J. Zool., Lond. 173 (1974) 549-573.
122. Alexander, R. McN. and Vernon, A., The mechanics of hopping by kangaroos (Macropodidae), J. Zool., Lond. 177 (1975) 265-303.
123. Alexander, R. McN., Maloiy, G. M. O., Njau, R. and Jayes, A. S., Mechanics of running of the ostrich (Struthio camelus), J. Zool., Lond. 187 (1979) 169-178.
124. Alexander, R. McN., Maloiy, G. M. O., Hunter, B., Jayes, A. S. and Nturibi, J., Mechanical stresses in fast locomotion of buffalo (Syncerus caffer) and elephant Loxodonta africano, J. Zool., Lond. 189 (1979) 135-144.
125. Scherge, M. and Gorb, S. N., Biological Micro-and Nano-tribology-Nature’s Solutions, Springer-Verlag, Berlin, Heidelberg, (2001) 1-304.
126. Arzt, E., Gorb, S. and Spolenak, R., From Micro to Nano Contacts in Biological Attachment Devices, Proc. Natl. Acad. Sci. USA 100, 19 (2003) 10603-10606.
127. Gao, H., Wang, X, Yao, H., Gorb, S. and Arzt, E., Mechanics of hierarchical adhesion structures of geckos, Mechanics of Materials 37 (2005) 275-285.
128. Akhmatov, A. S., Molecular physics of boundary lubrication, Gosudarstvennoe Izdatel’stvo Fiziko-Matematicheskoi Literatury, Moskva (1963) 1-480.
129. Johnson, K. L., Contact mechanics, Cambridge University Press, Cambridge, (1985) 1-452.
130. Israelachvili, J. N., Intermolecular and Surface Forces, Academic Press, London (1992) 179-204.
131. Autumn, K., Chang, W.-P., Fearing, R., Hsieh, T., Kenny, T., Liang, L., Zesch, W. and Full, R. J., Adhesive force of a single gecko foot-hair, Nature 405 (2000) 681-685.
132. Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. H., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J. N. and Full, R., Evidence for van der Waals adhesion in gecko setae, Proc. Natl. Acad. Sci. USA, 99, 19 (2002) 12252-12256.
133. Spolenak, R., Gorb, S., Gao, H. and Artz, E., Effects of contact shape on the scaling of biological attachments, Proc. R. Soc. 461 (2005) 305-319.
134. Autumn, K. How Gecko toes stick, American Scientist 94 (2006) 124-132.
135. Unsworth, A., Dowson, D. and Wright, V., The frictional behavior of human synovial joints-Part I: Natural Joints, Transactions of the ASME, F, Journal of Lubrication Technology 97, 3 (1975) 369-376.
136. O’Kelly, J. O., Unsworth, A., Dowson, D., Hall, D. A. and Wright, V., A study of the role of synovial fluid and its constituents in the friction and lubrication of human hip joints, IMechE, Engineering in Medicine 7, 2 (1978) 73-83.
137. Cooke, A. F., Dowson, D. and Wright, V., The rheology of synovial fluid and some potential synthetic lubricants for degenerate synovial joints, IMechE, Engineering in Medicine 7, 2 (1978) 66-72.
138. Hamrock, B. J. and Dowson, D., Elastohydrodynamic lubrication of elliptical contacts for materials of low elastic modulus, Part I-fully flooded conjunction, J. Lubr. Technol. 100, 2 (1978) 236-245.
139. Dowson, D. and Jin, Z.-M., Micro-elastohydrodynamic lubrication of synovial joints, Engineering in Medicine 15, 2 (1986) 63-65.
140. Swan, D. A., Hendren, R. B., Radin, E. L., Sotman, S. L. and Duda, E. A., The lubricating activity of synovial fluid glycoproteins, Arthritis and Rheumatism 24, 1 (1984) 22-30.
141. Swan, D. A., Bloch, K. J., Swindell, D. and Shore, E., The lubricating activity of human synovial fluids, Arthritis and Rheumatism 27, 5 (1984) 552-556.
142. Swan, D. A., Silver, F. H., Slayter, H. S., Stafford, W. and Shore, E., The molecular structure and lubricating activity of lubricin isolated from bovine and human synovial fluids, Biochem. J. 225 (1985) 195-201.
143. Hills, B. A. and Butler, B. D., Surfactants identified in synovial fluid and their ability to act as boundary lubricants, Annals of the Rheumatic Diseases 43 (1984) 641-648.
144. Hills, B. A., Boundary lubrication in vivo, Proc. I.Mech.E., Part ‘H’, Engineering in Medicine 214, H1 (2000) 83-94.
145. Scales, J. T., Arthroplasty of the hip using foreign materials: a history, in ‘Lubrication and wear in living and artificial human joints, Proceedings of the Institution of Mechanical Engineers, 1966-1967 181, Part 3J, (1967) 63-84.
146. Wiles, P., The surgery of the osteoarthritic hip, British Journal of Surgery 1957-1958 45 (1958) 488-497.
147. McKee, G. K. and Watson-Farrar, J., Replacement of arthritic hips by the McKee-Farrar prosthesis, Journal of Bone ad Joint Surgery 48B (1966) 245-259.
148. Carnley, J., Arthroplasty of the Hip-a New Operation, Lancet (1961) 1129.
149. Dowson, D. (Ed.), Special issue on the development of monolithic and surface replacement metal-on-metal hip replacements, Proc. IMechE, part H, Journal of Engineering in Medicine 220, H2 (2006) 1-412.
150. Dowson, D., Hardaker, C., Flett, M., and Isaac, G. H., (2004), A hip joint simulator study of the performance of metal-on-metal joints, Part I: the role of materials, J. Arthroplasty 19, (8), Suppl. 3 (2004) 118-123.
151. Dowson, D., Hardaker, C., Flett, M., and Isaac, G. H., A hip joint simulator study of the performance of metal-on-metal joints, Part II: design, J. Arthroplasty 19, (8), Suppl. 3 (2004) 124-131.
152. Adams, M. J., Briscoe, B. J. and Wee, T. K., The differential friction effect of keratin fibres, J. Phys. D. 23 (1990) 406-414.
153. Bhushan, B., Wei, G. and Haddad, P., Friction and wear studies of human hair and skin, Wear 259 (2005) 1012-1021.
154. Gitis, N. and Sivamani, R., Tribometrology of skin, STLE Tribology Transactions 47, 4 (2004) 461-469.
155. Wright, K. H. R., The abrasive wear resistance of human dental tissues, WEAR 14 (1969) 263-284.
156. De Gee, A. J., ten Harkel-Hagenaar, H. C. and Davidson, C. L., Structural and physical factors affecting the brush wear of dental composites, Journal of Dentistry 13, 1 (1985) 60-70.
157. Powers, J. M. and Bayne, S. C., Friction and wear of dental materials, ASM Handbook, Friction, Lubrication and Wear Technology, (Blau, P. J.), (1992) 665-681.