High performance hybrid PP and PLA biocomposites reinforced with short man-made cellulose fibres and softwood flour

Composites Part A: Applied Science and Manufacturing

Volumn 74, Issue , 2015, Pages 132-139

  Bledzki, A K ^a   Franciszczak, P ^a   Meljon, A ^a  

^a WEST POMERANIAN UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

A. Hybrid; A. Polymer matrix composites (PMCs); B. Mechanical properties; E. Injection moulding

Indexed keywords

CELLULOSE; COMPOSITE MATERIALS; FIBERS; GLASS; GLASS FIBERS; IMPACT STRENGTH; INJECTION MOLDING; MECHANICAL PROPERTIES; MOLDING; POLYMER MATRIX COMPOSITES; REINFORCED PLASTICS; REINFORCEMENT; SOFTWOODS; STRENGTH OF MATERIALS; TEXTILE FIBERS; THERMOPLASTICS;

A. HYBRID; BIO-BASED POLYMERS; E.INJECTION MOULDING; GLASS FIBRE REINFORCED; GLASS FIBRE REINFORCED THERMOPLASTIC; HIGH PERFORMANCE MATERIAL; POLYMER MATRIX COMPOSITES (PMCS); SHORT FIBRE COMPOSITES;

TENSILE STRENGTH;

CELLULOSE FIBERS; COMPOSITES; IMPACT STRENGTH; INJECTION MOLDING; MECHANICAL PROPERTIES; POLYPROPYLENE; THERMOPLASTICS; WOOD FLOUR;

EID: 84928728133     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2015.03.029     Document Type: Article

References (37)

1. K. Balaji Thattaiparthasarathy, S. Pillay, H. Ning, and U.K. Vaidya Process simulation, design and manufacturing of a long fiber thermoplastic composite for mass transit application Composites: Part A 39 9 2008 1512 1521
2. M.A. Dweib, C.F. Vahlund, and C.M.Ó. Brádaigh Fibre structure and anisotropy of glass reinforced thermoplastics Composites: Part A 31 3 2008 235 244
3. S.-Y. Fu, B. Lauke, E. Mader, C.-Y. Yue, and X. Hu Tensile properties of short-glass-fiber- and short-carbon-fiber-reinforced polypropylene composites Composites: Part A 31 10 2000 1117 1125
4. Directive 2000/53/EC of the European parliament and of the council of 18 September 2000 on end-of life vehicles. Off J L269, 21.10.2000. p. 34
5. O. Faruk, A.K. Bledzki, H.-P. Fink, and M. Sain Biocomposites reinforced with natural fibers: 2000-2010 Prog Polym Sci 37 11 2012 1552 1596
6. P. Wambua, J. Ivens, and I. Verpoest Natural fibres: can they replace glass in fibre reinforced plastics? Compos Sci Technol 63 9 2003 1259 1264
7. G. Faludi, G. Dora, K. Renner, J. Móczó, and B. Pukánszky Biocomposite from polylactic acid and lignocellulosic fibers: structure-property correlations Carbohydr Polym 92 2 2013 1767 1775
8. M. Shibata, K. Ozawa, N. Teramoto, R. Yosomiya, and H. Takeishi Biocomposites made from short abaca fiber and biodegradable polyesters Macromol Mater Eng 288 1 2003 35 43
9. J. Ganster, H.-P. Fink, and M. Pinnow High-tenacity man-made cellulose fibre reinforced thermoplastics-injection moulding compounds with polypropylene and alternative matrices Composites: Part A 37 10 2006 1796 1804
10. L. Sobczak, R.W. Lang, and A. Haider Polypropylene composites with natural fibers and wood - general mechanical property profiles Compos Sci Technol 75 5 2012 550 557
11. H. Peltola, E. Pääkkönen, P. Jetsu, and S. Heinemann Wood based PLA and PP composites: effect of fibre type and matrix polymer on fibre morphology, dispersion and composite properties Composites: Part A 61 2014 13 22
12. G. Marom, S. Fischer, F.R. Tuler, and H.D. Wagner Hybrid effects in composites: conditions for positive or negative effects versus rule-of-mixtures behaviour J Mater Sci 13 7 1978 1419 1426
13. H.D. Wagner, I. Roman, and G. Marom Hybrid effects in the bending stiffness of graphite/glass-reinforced composite J Mater Sci 17 5 1982 1359 1363
14. G. Kalaprasad, and T. Sabu Hybrid fibre reinforced polymer composite Int Plast Eng Technol 1 1995 87 98
15. G. Kalaprasad, J. Kuruvilla, and T. Sabu Influence of short glass fibre addition on the mechanical, properties of sisal reinforced low density polyethylene composites J Compos Mater 31 5 1997 509 527
16. E.M. Fernandes, J.F. Mano, and R.L. Reis Hybrid cork-polymer composites containing sisal fibre: morphology, effect of the fibre treatment on the mechanical properties and tensile failure prediction Compos Struct 105 2013 153 162
17. E.M. Fernandes, V.M. Correlo, J.F. Mano, and R.L. Reis Novel cork-polymer composites reinforced with short natural coconut fibres: effect of fibre loading and coupling agent addition Compos Sci Technol 78 2013 56 62
18. H.-J. Kwon, J. Sunthornvarabhas, J.-W. Park, J.-H. Lee, H.-J. Kim, and K. Piyachomkwan Tensile properties of kenaf fiber and corn husk flour reinforced poly(lactic acid) hybrid bio-composites: role of aspect ratio of natural fibers Composites: Part B 56 2014 232 237
19. M.A. Khan, J. Ganster, and H.-P. Fink Hybrid composites of jute and man-made cellulose fibers with polypropylene by injection moulding Composites: Part A 40 6-7 2009 846 851
20. Bledzki AK, Sperber VE, Faruk O. Natural and wood fibre reinforcement in polymers. Report 152, Rapra review reports, Shawbury; 2002.
21. Green DV, Winandy JE, Kretschmann DE. Mechanical properties of wood. In: Forest products laboratory. Wood handbook, wood as an engineering material. U.S. Department of Agriculture; 1999. p. 1-46.
22. B.A.-L. Östman Wood tensile strength at temperatures and moisture contents simulating fire conditions Wood Sci Technol 19 2 1985 103 116
23. S. Godavarti Thermoplastic wood fiber composites A.K. Mohanty, M. Misra, L.T. Drzal, Natural fibers, biopolymers, and biocomposites 2005 CRC Press Boca Raton
24. A.K. Bledzki, and J. Gassan Composites reinforced with cellulose based fibres Prog Polym Sci 24 2 1999 221 274
25. Cordenka - high tenacity rayon filament yarn. Cordenka GmbH 2009;1.
26. ChopVantage® HP 3786 technical data sheet. PPG fiber glass; 2014.
27. A. Jaszkiewicz, A.K. Bledzki, and A. Meljon Online observations and process analysis of chain extended polylactides during injection moulding Polym Degrad Stab 101 2014 65 70
28. A. Jaszkiewicz, A.K. Bledzki, A. Duda, A. Galeski, and P. Franciszczak Investigation of processability of chain-extended polylactides during melt processing - compounding conditions and polymer molecular structure Macromol Mater Eng 299 3 2014 307 318
29. A. Kelly, and W. Tyson Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum J Mech Phys Solids 13 1965 329 338
30. J.L. Thomason The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 7. Interface strength and fibre strain in injection moulded long fibre PP at high fibre content Composites: Part A 38 1 2007 210 216
31. M.G. Bader, and W.H. Bowyer An improved method of production for high strength fibre-reinforced thermoplastics Composites 4 4 1973 150 156
32. G.W. Ehrestein Polymeric materials 2001 Carl Hanser Verlag Munich
33. Y. Zhang, Y. Li, H. Ma, and T. Yu Tensile and interfacial properties of unidirectional flax/glass fiber reinforced hybrid composites Compos Sci Technol 88 14 2013 172 177
34. K.L. Goha, R.M. Aspdenb, and D.W.L. Hukinsc Review: finite element analysis of stress transfer in short-fibre composite materials Compos Sci Technol 64 9 2004 1091 1100
35. M.F. Ashby Materials selection in mechanical design 2005 Elsevier Butterworth-Heinemann Oxford
36. S.-Y. Fu, and B. Lauke The fibre pull-out energy of misaligned short fibre composites J Mater Sci 32 8 1997 1985 1993
37. M.S.M. Alger, and R.W. Dyson Thermoplastic composites Engineering polymers 1990 Blackie & Son Limited London