Present and future of the numerical methods in buildings and infrastructures areas of biosystems engineering

Journal of Agricultural Engineering

Volumn 46, Issue 1, 2015, Pages 1-12

  Ayuga, Francisco ^a  

^a UNIVERSIDAD POLITÉCNICA DE MADRID   (Spain)

Author keywords

Agricultural buildings; Computer fluids dynamics; Finite and discrete element method; Numerical methods; Rural infrastructures

Indexed keywords

EID: 84928347146     PISSN: 19747071     EISSN: 22396268     Source Type: Journal    
DOI: 10.4081/jae.2015.436     Document Type: Review

References (129)

1. Babuska I., Miller A. 1984a. The post-processing approach in the finite element method, I: calculations of displacements, stresses and other higher derivatives of the displacements. Int. J. Num. Methods Engine. 20:1085-109.
2. Babuska I., Miller A. 1984b. The post-processing approach in the finite element method, II: the calculation of stresse intensity factors. Int. J. Num. Methods Engine. 20:1111-29.
3. Babuska I., Miller A. 1984c. The post-processing approach in the finite element method, III: a posteriori error estimation and adaptive mesh selection. Int. J. Num. Methods Engine. 20:2311-24.
4. Balevičius R., Kačianauskas R., Mróz Z., Sielamowicz I. 2011. Analysis and DEM simulation of granular material flow patterns in hopper models of different shapes. Adv. Powder Technol. 22:226-35.
5. Bank R.E., Dupont T. 1981. An optimal order process for solving finite element equations. Math. Comput. 36:35-51.
6. Baño V., Arriaga F., Soilán A., Guaita M. 2011. Prediction of bending load capacity of timber beams using a finite element method simulation of knots and grain deviation. Biosyst. Engine. 109:241-9.
7. Bartzanas T., Kacira M., Zhu H., Karmakar S., Tamimi E., Katsoulas N., Lee I., Kittas C. 2013. Computational fluid dynamics applications to improve crop production systems. Comput. Electron. Agric. 93:151-67.
8. Basaglia C., Camotim D., Silvestre N. 2013. Post-buckling analysis of thin-walled steel frames using generalised beam theory (GBT). Thin-Walled Struct. 62:229-42.
9. Bathe K.J., Wilson E.L. 1976. Numerical methods in finite element analysis. Prentice-Hall, Englewood Cliffs, NJ, USA.
10. Bhandari A., Han J. 2010. Investigation of geotextile-soil interaction under a cyclic vertical load using the discrete element method. Geotext. Geomembr. 28:33-43.
11. Bjerg B., Cascone G., Lee I.B., Bartzanas T., Norton T., Hong S.W., Seo I.H., Banhazi T., Liberati P., Marucci A., Zhang G. 2013. Modelling of ammonia emissions from naturally ventilated livestock buildings. Part 3: CFD modelling. Biosyst. Engine. 116:259-75.
12. Boac J.M., Casada M.E., Maghirang R.G., Harner J.P. 2010. Material and interaction properties of selected grains and oilseeds for modeling discrete particles. Trans. ASABE 53:1201-16.
13. Briassoulis D. 2004. Mechanical design requirements for low tunnel biodegradable and conventional films. Biosyst. Engine. 87:209-23.
14. Brosh T., Kalman H., Levy A. 2011. DEM simulation of particle attrition in dilute-phase pneumatic conveying. Granular Matter 13:175-81.
15. Bustamante E., Garcia-Diego F.J., Calvet S., Estelles F., Beltran P., Hospitaler A., Torres A.G. 2013. Exploring ventilation efficiency in poultry buildings: the validation of computational fluid dynamics (CFD) in a cross-mechanically ventilated broiler farm. Energies 6:2605-23.
16. Cabrero J.M., Gebremedhin K.G. 2009. Finite element model for predicting stiffness of metal-plate-connected tension-splice and heel joints of wood trusses. Trans. ASABE 52:565-73.
17. Cai Z. 1991. On the finite volume element method. Numer. Math. 58:713-35.
18. Chung Y.C., Ooi J.Y. 2008. A study of influence of gravity on bulk behaviour of particulate solid. Particuology 6:467-74.
19. Chung Y.C., Ooi J.Y. 2011. Benchmark tests for verifying discrete element modelling codes at particle impact level. Granular Matter 13:643-56.
20. Chung Y.C., Ooi J.Y. 2012. Linking of discrete element modelling with finite element analysis for analysing structures in contact with particulate solid. Powder Technol. 217:107-20.
21. Clough R.W. 1960. The finite element in plane stress analysis. In Proc. 2nd ASCE Conf. on Electronic Computation, Sept. 8-9, Pittsburgh, PA, USA.
22. Coetzee C.J., Els D.N.J. 2009. Calibration of discrete element parameters and the modelling of silo discharge and bucket filling. Comput. Electron. Agric. 65:198-212.
23. Couto A., Guaita M., Vidal P. 2001. Análisis de la distribución de presiones estáticas en silos cilíndricos con tolva excéntrica mediante el M. E. F. Influencia de la excentricidad y comparación con el Eurocódigo 1. Inf. Constr. 52:17-27.
24. Cundall P.A., Strack O.D.L. 1979. A discrete numerical model for granular assemblies. Géotechnique 29:47-65.
25. Dados J.N., Fragos V.P., Ntinas G.K., Papoutsi-Psychoudaki S., Nikita-Martzopoulou Ch. 2011. Numerical simulation of airflow over two successive tunnel greenhouses. Int. Agrophys. 25:333-42.
26. Ding S., Rotter J.M., Ooi J.Y., Enstad G., Xu D. 2013. Normal pressures and frictional tractions on shallow conical hopper walls after concentric filling: predictions and experiments. Chem. Engine. Sci. 89:264-72.
27. Džiugys A., Peters B. 2001. An approach to simulate the motion of spherical and non-spherical fuel particles in combustion chambers. Granular Matter 3:231-66.
28. Estrada-Flores S., Cleland A.C., Cleland D.J. 2001. Prediction of the dynamic thermal behaviour of walls for refrigerated rooms using lumped and distributed parameter models. Int. J. Refrig. 24:272-84.
29. Fatnassi H., Boulard T., Bouirden L. 2003. Simulation of climatic conditions in full-scale greenhouse fitted with insect-proof screens. Agric. Forest Meteorol. 118:97-111.
30. Fernández M.D., Rodríguez M.R., Díaz F. 2007. Modeling heat transfer in substrates heated by electric cable depending on heating cable spacing. Trans. ASABE 50:607-14.
31. Fletcher D.F., Haynes B.S., Christo F.C., Joseph S.D. 2000. A CFD based combustion model of an entrained flow biomass gasifier. Appl. Math. Model. 24:165-82.
32. Flores-Velázquez J., Villarreal-Guerrero F., Lara-Mireles J.L., Montero J.I., Rojano F. 2013. Climate behavior of a rabbit barn in Central Mexico by using computational fluid dynamics (CFD). In Annual ASABE Meeting 2013, July 21-24, Kansas City, MO, USA, paper: 131617903.
33. Forde B.W.R., Foschi R.O., Stiemer S.F. 1990. Object-oriented finite element analysis. Comput. Struct. 34:355-74.
34. Franck A., Verhegghe B., De Belie N. 2008. The effect of concrete floor roughness on bovine claws using finite element analysis. J. Dairy Sci. 91:182-92.
35. Franco A., Valera D.L., Peña A., Pérez A.M. 2011. Aerodynamic analysis and CFD simulation of several cellulose evaporative cooling pads used in Mediterranean greenhouses. Comput. Electron. Agric. 76:218-30.
36. Gallego E., González-Montellano C., Ramírez A., Ayuga F. 2011. A simplified analytical procedure for assessing the worst patch load location on circular steel silos with corrugated walls. Engine. Struct. 33:1940-54.
37. Garg A.K., Abolmaali A. 2009. Finite-element modeling and analysis of reinforced concrete box culverts. J. Transport. Engine. ASCE 135:121-8.
38. Ge T., Zhang Q. 2009. Arch formation and destruction in a model bin during vibration. Trans. ASABE 52:559-64.
39. Gebremedhin K.G., Wu B. 2003. Characterization of flow field in a ventilated space and simulation of heat exchange between cows and their environment. J. Thermal Biol. 28:301-19.
40. González-Montellano C. 2010. Applications of the discrete element method to the study of granular materials stored in silos and hoppers. PhD thesis. Universidad Politécnica de Madrid, Spain.
41. González-Montellano C., Fuentes J.M., Ayuga-Téllez E., Ayuga F. 2012a. Determination of the mechanical properties of maize grains and olives required for use in DEM simulations. J. Food Engine. 111:553-62.
42. González-Montellano C., Ramírez A., Fuentes J.M., Ayuga F. 2012b. Numerical effects derived from en masse filling of agricultural silos in DEM simulations. Comput. Electron. Agric. 81:113-23.
43. González-Montellano C., Ramirez A., Gallego E., Ayuga F. 2011. Validation and experimental calibration of 3D discrete element models for the simulation of the discharge flow in silos. Chem. Engine. Sci. 66:5116-26.
44. Guaita M., Couto A., Ayuga F. 2003. Numerical simulation of wall pressure during discharge of granular material from cylindrical silos with eccentric hoppers. Biosyst. Engine. 85:101-9.
45. Guedes J.M., Kikuchi N. 1990, Preprocessing and postprocessing for materials based on the homogenization method with adaptive finite element methods. Comput. Methods Appl. Mechan. Engine. 83:143-98.
46. Härtl J., Ooi J.Y. 2011. Numerical investigation of particle shape and particle friction on limiting bulk friction in direct shear tests and comparison with experiments. Powder Technol. 212:231-9.
47. He M., Lam F., Foschi R.O. 2001. Modeling three-dimensional timber light-frame buildings. J. Struct. Engine. ASCE 127:901-13.
48. Hinterhofer D., Haider H., Apprich V., Ferguson J.C., Collins S.N., Stanek C. 2009. Development of a twenty-one-component finite element distal hind limb model: Stress and strain in bovine digit structures as a result of loading on different floorings. J. Dairy Sci. 92:972-9.
49. Ho-Le K. 1988. Finite element mesh generation methods: a review and classification. Comput. Aided Design 20:27-38.
50. Holst F.G.J.M., Ooi J.Y., Rotter J.M., Rong G.H. 1999. Numerical modelling of silo filling. II: Discrete element analyses. J. Engine. Mechan. 125:104-10.
51. Hong S., Lee I., Hwang H., Seo I., Bitog J., Kwon K., Song J., Moon O., Kim K., Ko H. 2011. CFD modelling of livestock odour dispersion over complex terrain, part I: topographical modelling. Biosyst. Engine. 108:253-64.
52. Huisman J.A., Rings J., Vrugt J.A., Sorg J., Vereecken H. 2010. Hydraulic properties of a model dike from coupled Bayesian and multi-criteria hydrogeophysical inversion. J. Hydrol. 380:62-73.
53. Idriss A.F., Negi S.C., Jofriet J.C., Hayward G.L. 2001. Corrosion of steel reinforcement in mortar exposed to hydrogen sulphide, part 2: Diffusion tests. J. Agric. Engine. Res. 79:341-8.
54. Iwicki P., Wójcik M., Tejchman J. 2011. Failure of cylindrical steel silos composed of corrugated sheets and columns and repair methods using a sensitivity analysis. Engine. Fail. Anal. 18:2064-83.
55. Jensen O., Wroldsen A.S., Lader P.F., Fredheim A., Heide M. 2007. Finite element analysis of tensegrity structures in offshore aquaculture installations. Aquacult. Engine. 36:272-84.
56. Jofriet J.C., Lelievre B., Fwa F. 1977. Friction model for finite element analyses of silos. Trans. ASAE 20:735-40.
57. Jofriet J.C., Negi S.C., Lu Z. 1997. A numerical model for flow of granular materials in silos. Part 3, parametric study. J. Agric. Engine. Res. 68:237-46.
58. Kanvinde A.M., Jordan S.J., Cooke R.J. 2013. Exposed column base plate connections in moment frames -simulations and behavioral insights. J. Construct. Steel Res. 84:82-93.
59. Kim J.S., Kim J.Y., Lee S.R. 1997. Analysis of soil nailed earth slope by discrete element method. Comput. Geotechn. 20:1-14.
60. Kim K., Yoon J., Kwon H., Han J., Son J.E., Nam S., Giacomelli G.A., Lee I. 2008. 3-D CFD analysis of relative humidity distribution in greenhouse with a fog cooling system and refrigerative dehumidifiers. Biosyst. Engine. 100:245-55.
61. Kruggel-Emden H., Sturm M., Wirtz S., Scherer V. 2008. Selection of an appropriate time integration scheme for the discrete element method (DEM). Comput. Chem. Engine. 32:2263-79.
62. Krushelnitzky R.P., Brachman R.W.I. 2009. Measured deformations and calculated stresses of high-density polyethylene pipes under very deep burial. Can. Geotechn. J. 46:650-64.
63. Kuwata Y., Takada S., Tanaka Y., Miyazaki H., Komatsu Y. 2010. Fragility of underground pipeline under high levels of ground motion. J. Water Supply Res. Technol. Aqua 59:400-7.
64. Lee I., Bitog J.P.P., Hong S., Seo I., Kwon K., Bartzanas T., Kacira M. 2013. The past, present and future of CFD for agro-environmental applications. Comput. Electron. Agric. 93:168-83.
65. Li Y., Guo H. 2006. Comparison of odor dispersion predictions between CFD and CALPUFF models. Trans. ASABE 49:1915-26.
66. Lin X.J., Barrington S., Gong G., Choiniere D. 2009. Simulation of odour dispersion downwind from natural windbreaks using the computational fluid dynamics standard k-epsilon model. Can. J. Civil Engine. 36:895-910.
67. Lu Z., Negi S.C., Jofriet J.C. 1997. A numerical model for flow of granular materials in silos. Part 1: model development. J. Agric. Engine. Res. 68:223-9.
68. Mahmoud E., Masad E. 2010. A probabilistic model for predicting the resistance of aggregates in asphalt mixes to fracture. Road Mater. Pavement Design 11:335-60.
69. Majdoubi H., Boulard T., Fatnassi H., Bouirden L. 2009. Airflow and microclimate patterns in a one-hectare Canary type greenhouse: an experimental and CFD assisted study. Agric. Forest Meteorol. 149:1050-62.
70. Masson S., Martinez J., Baylac B., Ferellec J.F. 2003. Simulation numérique discrete des materiaux granulaires. Mécan. Industr. 4:497-504.
71. Mishnaevsky L.L., Schmauder S. 2001. Continuum mesomechanical finite element modeling in materials development: a state-ofthe-art review. Appl. Mechan. Rev. 54:49-73.
72. Mistriotis A., Briassoulis D. 2002. Numerical estimation of the internal and external aerodynamic coefficients of a tunnel greenhouse structure with openings. Comput. Electron. Agric. 34:191-205.
73. Moazed R., Fotouhi R., Szyszkowski W. 2012. Out-of-plane behaviour and FE modelling of a T-joint connection of thin-walled square tubes. Thin-Walled Struct. 51:87-98.
74. Mohsenimanesh A., Ward S.M., Gilchrist M.D. 2009. Stress analysis of a multi-laminated tractor tyre using 3D finite elements. Mater. Design 30:1124-32.
75. Mohtar R.H., Segerlind L.J., Person H.L. 1995. Analyzing water distribution systems for swine growing and finishing units. Comput. Electron. Agric. 13:75-86.
76. Molina-Aiz F.D., Fatnassi H., Boulard T., Roy J.C., Valera D.L. 2010. Comparison of finite element and finite volume methods for simulation of natural ventilation in greenhouses. Comput. Electron. Agric. 72:69-86.
77. Molina-Aiz F.D., Valera D.L., Álvarez A.J. 2004. Measurement and simulation of climate inside Almería-type greenhouses using computational fluid dynamics. Agric. Forest Meteorol. 125:33-51.
78. Mondaca M., Rojano F., Choi C.Y., Gebremedhin K.G. 2013. A conjugate heat and mass transfer model to evaluate the efficiency of conductive cooling for dairy cattle. Trans. ASABE 56:1471-82.
79. Mossad R.R. 2009. Optimization of the ventilation system for a forced ventilation piggery. J. Green Build. 4:113-33.
80. Mostafa E., Lee I.B., Song S.H., Kwon K.S., Seo I.H., Hong S.W., Hwang H.S., Bitog J.P., Han H.T. 2013. Computational fluid dynamics simulation of air temperature distribution inside broiler building fitted with duct ventilation system. Biosyst. Engine. 112:293-303.
81. Nayak G.C., Zienkiewicz O.C. 1972. Elasto-plastic stress analysis. A generalization for various contitutive relations including strain softening. Int. J. Num. Methods Engine. 5:113-35.
82. Niu X., Xing Y. 2013. Design and calculation of a large self-anchored ecological block retaining wall. Appl. Mechan. Mater. 253-255:789-95.
83. Norton T., Grant J., Fallon R., Sun D.W. 2010. Improving the representation of thermal boundary conditions of livestock during CFD modelling of the indoor environment. Comput. Electron. Agric. 73:17-36.
84. Norton T., Sun D.W., Grant J., Fallon R., Dodd V. 2007. Applications of computational fluid dynamics (CFD) in the modelling and design of ventilation systems in the agricultural industry: a review. Bioresour. Technol. 98:2386-414.
85. Parafiniuk P., Molenda M., Horabik J. 2013. Discharge of rapeseeds from a model silo: Physical testing and discrete element method simulations. Comput. Electron. Agric. 97:40-46.
86. Pawar S.R., Cimbala J.M., Wheeler E.F., Lindberg D.V. 2010. Contaminant dispersion within and around poultry houses using computational fluid dynamics. In: H.W. Oh (ed.), Computational fluid dynamics. InTech, Rijeka, Croatia. Available from: http://www.intechopen.com/books/computational-fluid-dynamics/contaminant-dispersion-within-and-around-poultry-houses-using-computational-fluid-dynamics
87. Peng Z., Doroodchilow E., Evans G. 2010. DEM simulation of aggregation of suspended nanoparticles. Powder Technol. 204:91-102.
88. Plassiard J.P., Donze F.V. 2010. Optimizing the design of rockfall embankments with a discrete element method. Engine. Struct. 32:3817-26.
89. Predicala B.Z., Maghirang R.G. 2003. Numerical simulation of particulate matter emissions from mechanically ventilated swine barns. Trans. ASAE 46:1685-94.
90. Psycharis I.N., Drougas A.E., Dasiou M.E. 2011. Seismic behaviour of the walls of the Parthenon a numerical study. In M. Papadrakakis, M. Fragiadakis, N. D. Lagaros (eds.), Computational methods in earthquake engineering. Springer, Berlin, Germany, 21:265-83.
91. Radjaï F., Dubois F. 2011. Discrete-element modeling of granular materials. John Wiley and Sons, Inc., London, UK.
92. Rahardjo H., Harnas F.R., Leong E.C., Tan P.Y., Fong Y.K., Sim E.K. 2009. Tree stability in an improved soil to withstand wind loading. Urban Forest. Urban Green. 8:237-47.
93. Ramírez-Gómez A., Gallego E., Fuentes J. M., González-Montellano C., Ayuga F. 2014. Values for particle-scale properties of biomass briquettes made from agroforestry residues. Particuology 12:100-6.
94. Rong G.H., Negi S.C., Jofriet J.C. 1995. Simulation of flow behaviour of bulk solids in bins. Part 1: model development and validation. J. Agric. Engine. Res. 62:247-56.
95. Rosendahl L.A., Yin C., Kær S.K., Friborg K., Overgaard P. 2007. Physical characterization of biomass fuels prepared for suspension firing in utility boilers for CFD modelling. Biomass Bioener. 31:318-25.
96. Rouboa A., Monteiro E. 2007. Computational fluid dynamics analysis of greenhouse microclimates by heated underground tubes. J. Mechan. Sci. Technol. 21:2196-204.
97. Salo Z., Thomason J.J., Runciman R.J. 2010. Analysis of strain and stress in the equine hoof using finite element analysis: comparison with minimum principal strains recorded in vivo. Biosyst. Engine. 107:262-70.
98. Schwlizerhof K., Ramm E. 1984. Displacement dependent pressure loads in nonlinear finite element analyses. Comput. Struct. 18:1099-114.
99. Shahbazian A., Wang Y.C. 2013. A simplified approach for calculating temperatures in axially loaded cold-formed thin-walled steel studs in wall panel assemblies exposed to fire from one side. Thin-Walled Struct. 64:60-72.
100. Shen S.H., Yu H.A. 2011. Characterize packing of aggregate particles for paving materials: Particle size impact. Construct. Build. Mater. 25:1362-8.
101. Shen X., Zhang G., Wu W., Bjerg B. 2013. Model-based control of natural ventilation in dairy buildings. Comput. Electron. Agric. 94:47-57.
102. Shiehnejadhesar A., Schulze K., Scharler R., Obernberger I. 2013. A new innovative CFD-based optimisation method for biomass combustion plants. Biomass Bioener. 53:48-53.
103. Stasiak R., Molenda M., Horabik J. 2007. Determination of modulus of elasticity of cereals and rapeseeds using acoustic method. J. Food Engine. 82:51-7.
104. Stasiak R., Molenda M., Opali ski I., Błaszczak W. 2013. Mechanical properties of native maize, wheat, and potato starches. Czech J. Food Sci. 31:347-54.
105. Suhey J.D., Kim N.H., Niezrecki C. 2005. Numerical modeling and design of inflatable structures-application to open-ocean-aquaculture cages. Aquacult. Engine. 33:285-303.
106. Sun H., Stowell R.R., Keener H.M., Michel F.C Jr. 2002. Two-dimensional computational fluid dynamics (CFD) modeling of air velocity and ammonia distribution in a high-risetm hog building. Trans. ASAE 45:1559-68.
107. Sykut J., Molenda M., Horabik J. 2008. DEM simulation of the packing structure and wall load in a 2-dimensional silo. Granular Matter 10:273-8.
108. Takai H., Nimmermark S., Banhazi T., Norton T., Jacobson L.D., Calvet S., Hassouna M., Bjerg B., Zhang G., Pedersen S., Kai P., Wang K., Berckmans D. 2013. Airborne pollutant emissions from naturally ventilated buildings: proposed research directions. Biosyst. Engine. 116:214-20.
109. Taylor R.L. 1985. Solution of linear equations by a profile solver. Engine. Computat. 2:344-50.
110. Thomason J.J., McClinchey H.L., Faramarzi B., Jofriet J.C. 2005. Mechanical behaviour and quantitative morphology of the equine laminar junction. Anat. Record Part A 283:366-79.
111. Tierney G., Thomson R. 2003. Methods for assessing the cushioning performance of free-stall dairy cow synthetic beds. Trans. ASAE 46:147-53.
112. Tijskens E., Ramon H., De Baerdemaeker J. 2003. Discrete element modelling for process simulation in agriculture. J. Sound Vibrat. 266:493-514.
113. Tong G., Zhang G., Christopher D.M., Bjerg B., Ye Z., Cheng J. 2013. Evaluation of turbulence models to predict airflow and ammonia concentrations in a scale model swine building enclosure. Comput. Fluids 71:240-9.
114. Topkaya C., Rotter J.M. 2014. Ideal location of intermediate ring stiffeners on discretely supported cylindrical shells. J. Engine. Mechan. 140:688-715.
115. Torre-Gea G., Soto-Zarazúa G.M., López-Crúz I., Torres-Pacheco I., Rico-García E. 2011. computational fluid dynamics in greenhouses: a review. Afr. J. Biotechnol. 10:17651-62.
116. Turner M.J., Clough R.W., Martin H.C., Tepp L.J. 1956. Stiffness and deflection analysis of complex structures. J. Aeronautic. Sci. 23:805-24.
117. Van de Lindt J.W., Li Y., Bulleit W.M., Gupta R., Morris, P.I. 2009. The next step for AFandPA/ASCE 16: performance-based design of wood structures. J. Struct. Engine. 135:611-8.
118. Van Liedekerke P., Piron E., Vangeyte J., Villette S., Ramon H., Tijskens E. 2008. Recent results of experimentation and DEM modeling of centrifugal fertilizer spreading. Granular Matter 10:247-55.
119. Vanstreels E., Alamar M.C., Verlinden B.E., Enninghorst A., Loodts J.K.A., Tijskens E., Ramon H., Nicolaï B.M. 2005. Micromechanical behaviour of onion epidermal tissue. Postharvest Biol. Technol. 37:163-73.
120. Vázquez J., Pérez J., Callejón A.J., Carreño A. 2011. Diseño de un nuevo capitel para invernaderos multitúnel. Inf. Constr. 63:47-56.
121. Weber G., Ananda L. 1990. Finite deformation constitutive equations and a time integration procedure for isotropic, hyperelastic-viscoplastic solids. Comput. Methods Appl. Mechan. Engine. 79:173-202.
122. Wright B.W., Manbeck H.B. 1992. Theoretical prediction models for diaphragm panel behavior -a review. Trans. ASAE 35:287-95.
123. Wu B.X. 2013. Advances in the use of CFD to characterize, design and optimize bioenergy systems. Comput. Electron. Agricult. 93:195-208.
124. Wu W., Zhai J., Zhang G., Nielsen P.V. 2012. Evaluation of methods for determining air exchange rate in a naturally ventilated dairy cattle building with large openings using computational fluid dynamics (CFD). Atmos. Environ. 63:179-88.
125. Yan X., Radwan E., Zhang F., Parker J.C. 2008. Evaluation of dynamic passing sight distance problem using a finite-element model. J. Transport. Engine. 134:225-35.
126. Zajicek M., Kic P. 2012. Improvement of the broiler house ventilation using the CFD simulation. Agron. Res. 10:235-42.
127. Zhang G., Svidt K., Bjerg B., Morsing S. 1999. Buoyant flow generated by thermal convection of a simulated pig. Trans. ASAE 42:1113-20.
128. Zhong Z., Mackerle J. 1992. Static contact problems. A review. Engine. Computat. 9:3-37.
129. Zienkiewicz O.C. 1967. The finite element method in structural mechanics and continuum mechanics. McGraw-Hill, London, UK.