When Scavengers Meet Industrial Wireless

IEEE Transactions on Industrial Electronics

Volumn 62, Issue 5, 2015, Pages 2994-3003

  Martinez, Borja ^a,b   Vilajosana, Xavier ^b,c,d   Chraim, Fabien ^e   Vilajosana, Ignasi ^b   Pister, Kristofer S J ^c  

^a UNIVERSITAT AUTÒNOMA DE BARCELONA   (Spain)

^b Worldsensing   (Spain)

^c UNIVERSITY OF CALIFORNIA   (United States)

^d UNIVERSITAT OBERTA DE CATALUNYA   (Spain)

^e Solfice Research   (United States)

Author keywords

energy scavenging; industrial wireless; Low power modelling; self powered wireless sensor networks

Indexed keywords

ACCESS CONTROL; LOW POWER ELECTRONICS; MEDIUM ACCESS CONTROL; SCAVENGING; WIRELESS TELECOMMUNICATION SYSTEMS;

CONTROL AND MONITORING SYSTEMS; DETERMINISTIC BEHAVIOR; ENERGY SCAVENGING; INDUSTRIAL WIRELESS; LOW POWER; LOW-POWER WIRELESS COMMUNICATIONS; MEDIUM ACCESS CONTROL LAYER; SELF-POWERED;

WIRELESS SENSOR NETWORKS;

EID: 84927611497     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2014.2362891     Document Type: Article

References (25)

1. WirelessHART Specification 75: TDMA Data-Link Layer, HCF-SPEC-75, 2008.
2. ISA-100.11a-2011: Wireless Systems for Industrial Automation: Process Control and Related Applications, ISA, Madrid, Spain, May 2011.
3. IEEE Standard for Local and metropolitan area networks - Part 15.4: Low-Rate Wireless Personal Area Networks (LR-WPANs) Amendment 1: MAC sublayer, 802.15.4e-2012, Apr. 16, 2012.
4. L. Doherty, W. Lindsay, and J. Simon, "Channel-specific wireless sensor network path data," in Proc. ICCCN, 2007, pp. 89-94.
5. M. Tubaishat and S. Madria, "Sensor networks: An overview," IEEE Potentials, vol. 22, no. 2, pp. 20-23, 2003.
6. D. Steingart and J. Polastre, "Energy harvesting white paper," White Paper, 2008.
7. A. Khaligh and P. Zeng, "Kinetic energy harvesting using piezoelectric and electromagnetic technologies: State of the art," IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 850-860, Mar. 2010.
8. R. Torah et al., "Self-powered autonomous wireless sensor node using vibration energy harvesting," Meas. Sci. Technol., vol. 19, no. 12, p. 125202, Dec. 2008.
9. A. Waterbury and P. K. Wright, "Vibration energy harvesting to power condition monitoring sensors for industrial and manufacturing equipment,"Proc. Inst. Mech. Eng., J. Mech. Eng. Sci., vol. 227, no. 6, pp. 1187-1202, Jun. 2013.
10. J. Carmo, L. Goncalves, and J. Correia, "Thermoelectric microconverter for energy harvesting systems," IEEE Trans. Ind. Electron., vol. 57, no. 3, pp. 861-867, Mar. 2010.
11. rd Annu. IEEE Commun. Soc. SECON, 2006, vol. 1, pp. 286-295.
12. V. Liu et al., "Ambient backscatter: Wireless communication out of thin air," in Proc. ACM SIGCOMM Conf., New York, NY, USA, 2013, pp. 39-50.
13. B. Lu and V. Gungor, "Online and remote motor energy monitoring and fault diagnostics using wireless sensor networks," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4651-4659, Nov. 2009.
14. A. Nasiri, S. Zabalawi, and G. Mandic, "Indoor power harvesting using photovoltaic cells for low-power applications," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4502-4509, Nov. 2009.
15. Y. Tan and S. Panda, "Energy harvesting from hybrid indoor ambient light and thermal energy sources for enhanced performance of wireless sensor nodes," IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4424-4435, Sep. 2011.
16. M. Magno et al., "Extended wireless monitoring through intelligent hybrid energy supply," IEEE Trans. Ind. Electron., vol. 61, no. 4, pp. 1871-1881, Apr. 2014.
17. M. Mussetta, H. Shadmehr, F. Grimaccia, A. Gandelli, and R. Zich, "Optimization of a radio frequency energy harvesting device," in Proc. IEEE CEC, 2012, pp. 1-5.
18. R. D'hulst, T. Sterken, R. Puers, G. Deconinck, and J. Driesen, "Power processing circuits for piezoelectric vibration-based energy harvesters,"IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 4170-4177, Dec. 2010.
19. th Int. Symp. IPSN, Piscataway, NJ, USA, 2005, IEEE Press.
20. D. Stanislowski, X. Vilajosana, Q. Wang, T. Watteyne, and K. Pister, "Adaptive synchronization in IEEE802.15.4e networks," IEEE Trans. Ind. Informat., vol. 10, no. 1, pp. 795-802, Feb. 2014.
21. X. Vilajosana et al., "A realistic energy consumption model for TSCH networks," IEEE Sens. J., vol. 14, no. 2, pp. 482-489, Feb. 2014.
22. D. Zordan, B.Martinez, I. Vilajosana, and M. Rossi, "On the performance of lossy compression schemes for energy constrained sensor networking,"ACM Trans. Sens. Netw., vol. 11, no. 1, pp. 15:1-15:34, Aug. 2014.
23. A. Muszynska, "Vibrational diagnostics of rotating machinery malfunctions,"Int. J. Rotating Mach., vol. 1, no. 3/4, pp. 237-266, 1995.
24. A. Mehta and K. Pister, "WARPWING: A complete open-source control platform for miniature robots," in Proc. IEEE Int. Conf. IROS, 2010, pp. 5169-5174.
25. T.Watteyne et al., "OpenWSN: A standards-based low-power wireless development environment," Trans. Emerging Telecommun. Technol., vol. 23, no. 5, pp. 480-493, Aug. 2012.