Self-lubricating behavior of graphite-reinforced composites

Tribology for Scientists and Engineers: From Basics to Advanced Concepts

Volumn 9781461419457, Issue , 2013, Pages 341-389

  Menezes, Pradeep L ^a   Reeves, Carlton J ^a   Rohatgi, Pradeep K ^a   Lovell, Michael R ^a  

^a University of Wisconsin Milwaukee   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINA; ALUMINUM OXIDE; CERAMIC MATERIALS; CERAMIC MATRIX COMPOSITES; FRICTION; METALLIC MATRIX COMPOSITES; PARTICLE REINFORCED COMPOSITES; PHASE INTERFACES; SILICON NITRIDE; SOLID LUBRICANTS; TRIBOLOGY; WEAR OF MATERIALS;

COEFFICIENT RATE; CONTACT SURFACE; CONTACTING SURFACES; FRICTION AND WEAR; FRICTION/WEAR; LOW FRICTION; METAL MATRIX; SLIDING SURFACE; TRANSFER FILM; WEAR-RATE;

GRAPHITE;

EID: 84926489586     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1007/978-1-4614-1945-7_11     Document Type: Chapter

References (81)

1. Ludema KC (1996) Friction, wear, lubrication: a textbook in tribology. CRC Press, Boca Raton
2. Stachowiak GW, Batchelor AW (2005) Engineering tribology. Butterworth-Heinemann, Boston, MA
3. Lovell MR, Kabir MA, Menezes PL, Higgs CF III (2010) Influence of boric acid additive size on green lubricant performance. Philos Transact A Math Phys Eng Sci 368(1929):4851-4868. doi:10.1098/rsta.2010.0183
4. Brudnyi AI, Karmadonov AF (1975) Structure of molybdenum disulphide lubricant film. Wear 33(2):243-249. doi:10.1016/0043-1648(75)90279-3
5. Donnet C, Erdemir A (2004) Historical developments and new trends in tribological and solid lubricant coatings. Surf Coat Technol 180-181:76-84. doi:10.1016/j.surfcoat.2003.10.022
6. Bryant PJ, Gutshall PL, Taylor LH (1964) A study of mechanisms of graphite friction and wear. Wear 7(1):118-126. doi:10.1016/0043-1648(64)90083-3
7. Fusaro RL (1976) A comparison of the lubricating mechanisms of graphite fluoride and molybdenum films. In: ASLE proceedings of 2nd international conference on solid lubrication, Denver, CO, p 59
8. Fusaro RL (1984) Effect of substrate chemical pretreatment on the tribological properties of graphite films. In: ASLE proceedings 3rd international conference on solid lubrication, Denver, CO, p 1
9. Kato K, Osaki H, Kayaba T (1989) The lubricating properties of tribo-coating films of Pb-Sn alloys in high vacuum. Tribol Trans 32(1):42-46
10. Gardos MN (1988) The synergistic effects of graphite on the friction and wear of MoS2 films in air. Tribol Trans 31(2):214-227
11. Hilton MR, Fleischauer PD (1989) Structural studies of sputter-deposited MoS2 solid lubricant films. Defense Technical Information Center, Ft. Belvoir
12. Roberts EW, Price WB (1988) In-vacuo, tribological properties of high-rate sputtered MoS2 applied to metal and ceramic substrates. Mater Res Soc Symp Proc 140:251-264
13. Sliney HE (1979) Wide temperature spectrum self-lubricating coatings prepared by plasma spraying. Thin Solid Films 64(2):211-217
14. Sliney HE (1986) Tribology of selected ceramics at temperatures to 900 C. National Aeronautics and Aerospace Administration, Washington, DC [For sale by the National Technical Information Service, Springfield, VA]
15. Shankara A, Menezes P, Simha K, Kailas S (2008) Study of solid lubrication with MoS2 coating in the presence of additives using reciprocating ball-on-flat scratch tester. Sadhana 33(3):207-220
16. Pai BC, Rohatgi PK, Venkatesh S (1974) Wear resistance of cast graphitic aluminium alloys. Wear 30(1):117-125. doi:10.1016/0043-1648(74)90061-1
17. Rohatgi PK, Pai BC (1980) Seizure resistance of cast aluminium alloys containing dispersed graphite particles of various sizes. Wear 59(2):323-332. doi:10.1016/0043-1648(80)90190-8
18. Krishnan BP, Raman N, Narayanaswamy K, Rohatgi PK (1980) Performance of an Al-Sigraphite particle composite piston in a diesel engine. Wear 60(1):205-215. doi:10.1016/0043-1648(80)90259-8
19. Biswas S, Rohatgi PK (1983) Tribological properties of cast graphitic-aluminium composites. Tribol Int 16(2):89-102. doi:10.1016/0301-679x(83)90021-x
20. Akhlaghi F, Zare-Bidaki A (2009) Influence of graphite content on the dry sliding and oil impregnated sliding wear behavior of Al 2024-graphite composites produced by in situ powder metallurgy method. Wear 266(1-2):37-45. doi:10.1016/j.wear.2008.05.013
21. Rohatgi PK, Ray S, Liu Y (1992) Tribological properties of metal matrix-graphite particle composites. Int Mater Rev 37(3):129-152
22. Gibson PR, Clegg AJ, Das AA (1984) Wear of cast Al-Si alloys containing graphite. Wear 95(2):193-198. doi:10.1016/0043-1648(84)90117-0
23. Das S, Prasad SV, Ramachandran TR (1989) Microstructure and wear of cast (Al-Si alloy)-graphite composites. Wear 133(1):173-187. doi:10.1016/0043-1648(89)90122-1
24. He DH, Manory R (2001) A novel electrical contact material with improved self-lubrication for railway current collectors. Wear 249(7):626-636. doi:10.1016/s0043-1648(01)00700-1
25. Kato H, Takama M, Iwai Y, Washida K, Sasaki Y (2003) Wear and mechanical properties of sintered copper-tin composites containing graphite or molybdenum disulfide. Wear 255(1-6):573-578. doi:10.1016/s0043-1648(03)00072-3
26. Kestursatya M, Kim JK, Rohatgi PK (2003) Wear performance of copper-graphite composite and a leaded copper alloy. Mater Sci Eng A 339(1-2):150-158. doi:10.1016/s0921-5093(02) 00114-4
27. Moustafa SF, El-Badry SA, Sanad AM, Kieback B (2002) Friction and wear of copper-graphite composites made with Cu-coated and uncoated graphite powders. Wear 253(7-8):699-710. doi:10.1016/s0043-1648(02)00038-8
28. Myshkin NK, Konchits VV (1992) Friction and wear of metal-composite electrical contacts. Wear 158(1-2):119-140. doi:10.1016/0043-1648(92)90034-6
29. Kovácik J, Bielek J (1996) Electrical conductivity of Cu/graphite composite material as a function of structural characteristics. Scr Mater 35(2):151-156. doi:10.1016/1359-6462(96) 00121-2
30. Garcá-Márquez JM, Antón N, Jimenez A, Madrid M, Martinez MA, Bas JA (2003) Viability study and mechanical characterisation of copper-graphite electrical contacts produced by adhesive joining. J Mater Process Technol 143-144:290-293. doi:10.1016/s0924-0136(03)00476-x
31. Stoessel CH, Withers JC, Pan C, Wallace D, Loutfy RO (1995) Improved hollow cathode magnetron deposition for producing high thermal conductivity graphite-copper composite. Surf Coat Technol 76-77(Pt 2):640-644. doi:10.1016/0257-8972(95)02674-6
32. Tu CJ, Chen D, Chen ZH, Xia JT (2008) Improving the tribological behavior of graphite/Cu matrix self-lubricating composite contact strip by electroplating Zn on graphite. Tribol Lett 31(2):91-98. doi:10.1007/s11249-008-9341-2
33. Kovacik J, Emmer S, Bielek J, Kelesi L (2008) Effect of composition on friction coefficient of Cu-graphite composites. Wear 265(3-4):417-421. doi:10.1016/j.wear.2007.11.012
34. Ma W, Lu J, Wang B (2009) Sliding friction and wear of Cu-graphite against 2024, AZ91D and Ti6Al4V at different speeds. Wear 266(11-12):1072-1081. doi:10.1016/j.wear.2009.01.051
35. Chen B, Bi Q, Yang J, Xia Y, Hao J (2008) Tribological properties of solid lubricants (graphite, h-BN) for Cu-based P/M friction composites. Tribol Int 41(12):1145-1152. doi:10.1016/j.triboint.2008.02.014
36. Rajkumar K, Aravindan S (2009) Tribological performance of microwave-heat-treated copper-graphite composites. Tribol Lett 37(2):131-139. doi:10.1007/s11249-009-9499-2
37. Rajkumar K, Aravindan S (2011) Tribological performance of microwave sintered copper-TiC-graphite hybrid composites. Tribol Int 44(4):347-358. doi:10.1016/j.triboint. 2010.11.008
38. Ramesh CS, Noor Ahmed R, Mujeebu MA, Abdullah MZ (2009) Development and performance analysis of novel cast copper-SiC-Gr hybrid composites. Mater Design 30 (6):1957-1965. doi:10.1016/j.matdes.2008.09.005
39. Ma W, Lu J (2010) Effect of sliding speed on surface modification and tribological behavior of copper-graphite composite. Tribol Lett 41(2):363-370. doi:10.1007/s11249-010-9718-x
40. MaW, Lu J (2011) Effect of surface texture on transfer layer formation and tribological behaviour of copper-graphite composite. Wear 270(3-4):218-229. doi:10.1016/j.wear.2010.10.062
41. Zhan Y, Zhang G (2006) The role of graphite particles in the high-temperature wear of copper hybrid composites against steel. Mater Design 27(1):79-84. doi:10.1016/j.matdes.2004.08.019
42. Chen S, Wang J, Liu Y, Liang J, Liu C (2010) Synthesis of new Cu-based self-lubricating composites with great mechanical properties. J Compos Mater 45(1):51-63. doi:10.1177/0021998310371542
43. Ma XC, He GQ, He DH, Chen CS, Hu ZF (2008) Sliding wear behavior of copper-graphite composite material for use in maglev transportation system. Wear 265(7-8):1087-1092. doi:10.1016/j.wear.2008.02.015
44. Li J, Xiong D (2009) Tribological behavior of graphite-containing nickel-based composite as function of temperature, load and counterface. Wear 266(1-2):360-367. doi:10.1016/j.wear. 2008.06.020
45. Li J, Xiong D (2008) Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection. Wear 265(3-4):533-539. doi:10.1016/j.wear.2007.09.005
46. Li J, Xiong D, Yi W (2007) Tribological properties of nickel-graphite composite against different counterfaces at elevated temperatures. Trans Nonferrous Met Soc China 17:99-104
47. Wu Y, Shen B, Liu L, Hu W (2006) The tribological behaviour of electroless Ni-P-Gr-SiC composite. Wear 261(2):201-207. doi:10.1016/j.wear.2005.09.008
48. Qi Q (2006) Evaluation of sliding wear behavior of graphite particle-containing magnesium alloy composites. Trans Nonferrous Met Soc China 16(5):1135-1140. doi:10.1016/s1003-6326(06)60390-7
49. Zhang M, Liu Y, Yang X, An J, Luo K (2008) Effect of graphite particle size on wear property of graphite and Al2O3 reinforced AZ91D-0.8%Ce composites. Trans Nonferrous Met Soc China 18(Suppl 1):S273-S277. doi:10.1016/s1003-6326(10)60216-6
50. Zhang MJ, Yang XH, Liu YB, Cao ZY, Cheng LR, Pei YL (2010) Effect of graphite content on wear property of graphite/Al2O3/Mg-9Al-1Zn-0.8Ce composites. Trans Nonferrous Met Soc China 20(2):207-211. doi:10.1016/s1003-6326(09)60122-9
51. Zhang MJ, Cao ZY, Yang XH, Liu YB (2010) Microstructures and wear properties of graphite and Al2O3 reinforced AZ91D-Cex composites. Trans Nonferrous Met Soc China 20:471-475
52. Johnson JL, Schreurs J (1982) High current brushes: VIII: Effect of electrical load. Wear 78 (1-2):219-232. doi:10.1016/0043-1648(82)90033-3
53. Feng Y, Wang J, Zhang M, Xu Y (2007) The influence of pressure on the electrical tribology of carbon nanotube-silver-graphite composite. J Mater Sci 42(23):9700-9706. doi:10.1007/s10853-007-1939-5
54. Jha AK, Prasad SV, Upadhyaya GS (1989) Sintered 6061 aluminium alloy-solid lubricant particle composites: sliding wear and mechanisms of lubrication. Wear 133(1):163-172. doi:10.1016/0043-1648(89)90121-x
55. Jha AK, Prasad SV, Upadhyaya GS (1989) Dry sliding wear of sintered 6061 aluminium alloy-graphite particle composites. Tribol Int 22(5):321-327. doi:10.1016/0301-679x(89) 90147-3
56. Baradeswaran A, Elayaperumal A (2011) Effect of graphite content on tribological behaviour of aluminium alloy-graphite composite. Eur J Sci Res 53(2):163-170
57. Suresha S, Sridhara BK (2011) Friction characteristics of aluminium silicon carbide graphite hybrid composites. Mater Design. doi:10.1016/j.matdes.2011.05.010
58. Suresha S, Sridhara BK (2010) Wear characteristics of hybrid aluminium matrix composites reinforced with graphite and silicon carbide particulates. Compos Sci Technol 70 (11):1652-1659. doi:10.1016/j.compscitech.2010.06.013
59. Stojanovic B, Babic M, Mitrovic S, Miloradovic N, Pantic M, Vencl A (2013) Tribological characteristics of aluminium hybrid composites reinforced with silicon carbide and graphite. A review. J Balkan Tribol Assoc 19(1):83-96
60. Babic M, Stojanovic B, Mitrovic S, Bobic I, Miloradovic N, Pantic M (2012) The influence of lubricant on friction coefficient of hybrid Al-SiC-Gr composites. Paper presented at the international conference of Bulgarian tribologists, Sofia, 18-20 Oct 2012
61. Goto H, Uchijo K (2005) Wear mechanism of Al-Si alloy impregnated graphite composite under dry sliding. Wear 259(1-6):613-619. doi:10.1016/j.wear.2005.02.024
62. Jinfeng L, Longtao J, Gaohui W, Shoufu T, Guoqin C (2009) Effect of graphite particle reinforcement on dry sliding wear of SiC/Gr/Al composites. Rare Met Mater Eng 38 (11):1894-1898. doi:10.1016/s1875-5372(10)60059-8
63. Prasad SV, Asthana R (2004) Aluminum metal-matrix composites for automotive applications: tribological considerations. Tribol Lett 17(3):445-453
64. Gangopadhyay A, Jahanmir S (1991) Friction and wear characteristics of silicon nitridegraphite and alumina-graphite composites. Tribol Trans 34(2):257-265
65. Ishigaki H, Iwasa M, Toibana Y, Kawaguchi I (1986) Friction and wear of hot pressed silicon nitride and other ceramics. J Tribol 108(4):514
66. Bohmer M, Almond EA (1988) Mechanical properties and wear resistance of a whiskerreinforced zirconia-toughened alumina. Mater Sci Eng A 105-106:105-116
67. Yust C, McHargue C, Harris LA (1988) Friction and wear of ion-implanted TiB2. Mater Sci Eng A 105-106:489-496
68. Zum Gahr KH (1989) Sliding wear of ceramic-ceramic, ceramic-steel and steel-steel pairs in lubricated and unlubricated contact. Wear 133(1):1-22
69. Miyoshi K, Buckley DH (1979) Friction, deformation and fracture of single-crystal silicon carbide. ASLE Trans 22(1):79-90
70. Holzhauer W, Johnson RL, Murray SF (1981) Wear characteristics of water lubricated Al2O3-metal sliding couples. Wear of Materials 676
71. Jahanmir S, Fischer TE (1988) Friction and Wear of Silicon Nitride Lubricated by Humid Air, Water, Hexadecane and Hexadecane\+ 0.5 Percent Stearic Acid. Tribol Trans 31(1):32-43
72. Tomizawa H, Fischer TE (1987) Friction and wear of silicon nitride and silicon carbide in water-hydrodynamic lubrication at low sliding speed obtained by tribochemical wear. ASLE Trans 30:41-46
73. Gangopadhyay AK, Janon FB, Fine ME, Cheng HS (1990) Enhanced wear resistance of a-alumina by surface modification with chromia and titania. Tribol Trans 33(1):96-104
74. Sasaki S (1989) The effects of the surrounding atmosphere on the friction and wear of alumina, zirconia, silicon carbide and silicon nitride. Wear 134(1):185-200
75. Fischer TE, Anderson MP, Jahanmir S, Salher R (1988) Friction and wear of tough and brittle zirconia in nitrogen, air, water, hexadecane and hexadecane containing stearic acid. Wear 124 (2):133-148
76. Erdemir A, Fenske GR, Erck RA, Cheng CC (1989) Ion-assisted deposition of silver films on ceramics for friction and wear control. Conference: 44 annual Stle meeting, A.G.A.U.S.A.M., Argonne National Lab, IL, United States
77. Wedeven LD, Pallini RA, Miller NC (1988) Tribological examination of unlubricated and graphite-lubricated silicon nitride under traction stress. Wear 122(2):183-205
78. Pallini RA, Wedeven LD (1988) Traction characteristics of graphite lubricants at high temperature. Tribol Trans 31(2):289-295
79. Minford E, Prewo K (1985) Friction and wear of graphite-fiber-reinforced glass matrix composites. Wear 102(3):253-264
80. Gangopadhyay A, Jahanmir S, Hegemann BE (1990) Paper III (i) Reduction in friction coefficient in sliding ceramic surfaces by in-situ formation of solid lubricant coatings
81. Ruff AW, Peterson MB, Gangopadhyay A, Whitenton E (1989) Wear and friction characteristics of self-lubricating copper-intercalated graphite composites. Ft. Belvoir: Defense Technical Information Center