Polymer Extrusion

Polymer Extrusion

Volumn 9781848216501, Issue , 2014, Pages 1-337

  Lafleur, Pierre G ^a   Vergnes, Bruno ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

COEXTRUSION; ELASTOMERS; FILLED POLYMERS; POLYMER FILMS; PRODUCT DESIGN; REINFORCED PLASTICS; ROTATING MACHINERY; THERMOPLASTIC ELASTOMERS;

COEXTRUSION FLOWS; POLYMER EXTRUSION; SEMI-FINISHED PRODUCTS; SINGLE SCREW EXTRUSION; SPECIFIC MATERIALS; SYNTHETIC POLYMERS; THERMOPLASTIC POLYMER; TWIN SCREW EXTRUSION;

POLYVINYL CHLORIDES;

EID: 84926261868     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/9781118827123     Document Type: Book

References (338)

1. AGASSANT J.-F., AVENAS P., SERGENT J.-P., et al., Mise en forme des polymères. Approche thermomécanique de la plasturgie, Tec & Doc, Lavoisier, Paris, 2014.
2. BIRD R.B., STEWART W.E., LIGHTFOOT E.N., Transport Phenomena, Wiley, New York, 1960.
3. BIRD R.B., ARMSTRONG R.C., HASSAGER O., Dynamics of Polymeric Liquids, vol. 1, Fluid Mechanics, Wiley, New York, 1977.
4. CARSLAW H.S., JAEGER J.C., Conduction of Heat in Solids, Oxford University Press, Oxford, 1959.
5. DEALY J.M., WISSBRUN K.F., Melt Rheology and Its Role in Plastics Processing, Van Nostrand, New York, 1990.
6. FERRY J.D., Viscoelastic Properties of Polymers, Wiley, New York, 1970.
7. SALENÇON J., Mécanique des milieux continus, Ellipses, Paris, 1988.
8. AGASSANT J.-F., AVENAS P., SERGENT J.-P., et al., La mise en forme des polymères. Approche thermomécanique de la plasturgie, Tec et Doc, Lavoisier, Paris, 2014.
9. ARPIN B., LAFLEUR P.G., VERGNES B., "Simulation of polymer flow through a coat-hanger die: a comparison between two numerical approaches", Polymer Engineering & Science, vol. 32, pp. 206-212, 1992.
10. CHASKALOVIC J., Méthode des éléments finis pour les sciences de l'ingénieur, Tec et Doc, Lavoisier, Paris, 2004.
11. DHATT G., THOUZOT G., LEFRANÇOIS E., Méthode des éléments finis, Hermes Lavoisier, Paris, 2005.
12. DONER J., HUERTA A., Finite Element Methods for Flow Problems, Wiley, New York, 2003.
13. FORTIN A., Analyse numérique pour ingénieurs, Presses internationales Polytechnique, Montreal, 2001.
14. LUCQUIN B., PIRONNEAU O., Introduction au calcul scientifique, Masson, Paris, 1996.
15. MICHAELI W., Extrusion Dies, Hanser, Munich, 1984.
16. SORNBERGER G., VERGNES B., AGASSANT J.F., "Two directional coextrusion flow of two molten polymers in flat dies", Polymer Engineering & Science, vol. 26, pp. 455-461, 1986.
17. TADMOR Z., BROYER E., GUTFINGER C., "Flow analysis network: a method for solving flow problems in polymer processing", Polymer Engineering & Science, vol. 14, pp. 660-665, 1974.
18. TADMOR Z., GOGOS C.G., Principles of Polymer Processing, Wiley, New York, 1979.
19. VERGNES B., SAILLARD P., AGASSANT J.F., "Non-isothermal flow of a molten polymer in a coat-hanger die", Polymer Engineering & Science, vol. 24, pp. 980-987, 1984.
20. VERGNES B., Calcul des écoulements de polymères fondus dans les filières d'extrusion, PhD Thesis, University of Nice, 1985.
21. VERGNES B., AGASSANT J.F., "Die flow computations: a method to solve industrial problems in polymer processing", Advances in Polymer Technology., vol. 6, pp. 441-455, 1986.
22. ZIENKIEWICZ O.C., TAYLOR R.L., ZHU J.Z., Finite Element Method, its Basis and Fundamentals, Elsevier, Amsterdam, 2005.
23. AGASSANT J.-F., AVENAS P., SERGENT J.-P., et al., La mise en forme des polymères. Approche thermomécanique de la plasturgie, Tec et Doc, Lavoisier, Paris, 2014.
24. ALTINKAYNAC A., GUPTA M., SPALDING M.A., et al., "Melting in a single screw extruder: experiments and 3D finite element simulations", International Polymer Processing, vol. 26, pp. 182-196, 2011.
25. AMELLAL K., ARPIN B., LAFLEUR P.G., "A computer-model for the simulation of conventional and barrier screws", Polymer-Plastics Technology and Engineering, vol. 30, pp. 655-664, 1991.
26. ATTALLA G., PODIO-GUIDUGLI P., "On modeling the solids conveying zone of a plasticating extruder", Polymer Engineering & Science, vol. 20, pp. 709-715, 1980.
27. BROYER E., TADMOR Z., "Solids conveying in screw extruders. Part I: a modified isothermal model", Polymer Engineering & Science, vol. 12, pp. 12-24, 1972.
28. CAMPBELL G.A., WANG C., CHENG H., et al., "Investigation of flow rate and viscous dissipation in a single screw pump-extruder", International Polymer Processing, vol. 17, pp. 323-333, 2001.
29. CHUNG C.I., "Maximum pressure developed by solid conveying force in screw extruders", Polymer Engineering & Science, vol. 15, pp. 29-34, 1975.
30. CHUNG C.I., HENNESSEY W.J., TUSIM M.H., "Frictional behavior of solid polymers on a metal surface at processing conditions", Polymer Engineering & Science, vol. 17, pp. 9-20, 1977.
31. CHUNG C.I., Extrusion of Polymers. Theory and Practice, Hanser, Munich, 2000.
32. COVAS J.A., GASPAR-CUNHA A., "Extrusion scale-up: an optimizationbased methodology", International Polymer Processing, vol. 24, pp. 67-82, 2009.
33. DARNELL W.H., MOL E.A.J, "Solids conveying in screw extruders", Society of Plastics Engineers Journal, vol. 12, pp. 20-29, 1956.
34. DAVIS B.A., GRAMANN P.J., NORIEGA M.E., et al., "Grooved feed single screw extruders improving productivity and reducing viscous heating effects", Polymer Engineering & Science, vol. 38, pp. 1199-1204, 1998.
35. ELBIRLI B., LINDT J.T., GOTTGETREU S.R., et al., "Mathematical modeling of melting of polymers in a single-screw extruder", Polymer Engineering & Science, vol. 24, pp. 988-999, 1984.
36. FANG S., CHEN L., ZHU F., "Studies on the theory of single screw plasticating extrusion. Part II: non-plug flow solid conveying", Polymer Engineering & Science, vol. 31, pp. 1117-1122, 1991.
37. GAMACHE E., LAFLEUR P.G., PEITI C., et al., "Coefficients of dynamic friction measured at extrusion processing conditions", Polymer Engineering & Science, vol. 39, pp. 1604-1613, 1999.
38. GASPAR-CUNHA A., COVAS J.A., "The design of extrusion screws: an optimization approach", International Polymer Processing, vol. 16, pp. 229-240, 2001.
39. GHOREISHY M.H.R., RAZAVINOURI M., "Modeling the flow in the metering zone of single screw extruders using a helical geometry model", International Polymer Processing, vol. 19, pp. 95-100, 2004.
40. GOFFREDA F., "The application of groove feed extruders to produce mono-layer and coextruded medical films" SPE ANTEC Technical Papers, pp. 1121-1125, 1990.
41. HUANG F., Study of the Solids Conveying in Single Screw Extrusion, Mémoire de maîtrise, Ecole polytechnique de Montréal, Canada, 2002.
42. HWANG C.G., MCKELVEY J.M., "Solid bed compaction and frictional drag during melting in a simulated plasticating extruder", Advances in Polymer Technology, vol. 9, pp. 227-251, 1989.
43. HYUN K.S, SPALDING M.A, "Bulk density of solid polymer resins as a function of temperature and pressure", Polymer Engineering & Science, vol. 30, pp. 571-576, 1990.
44. ILINCA F., HÉTU J.F., "Three-dimensional finite element solution of the flow in single and twin-screw extruders", International Polymer Processing Journal of the Polymer Processing, vol. 25, pp. 275-286, 2010.
45. KACIR L., TADMOR Z., "Solids conveying in screw extruders. Part III: The delay zone", Polymer Engineering & Science, vol. 12, pp. 387-395, 1972.
46. KWAG D.S., LYU M.Y., KIM W.S., "A 3D numerical study of fluid flow and heat transfer in a single screw extruder", International Polymer Processing, vol. 17, pp. 95-101, 2002.
47. LINDT J.T., "Mathematical modeling of melting of polymers in a singlescrew extruder: a critical review", Polymer Engineering & Science, vol. 25, pp. 585-588, 1985.
48. LIU C.Y., O'BRIEN K.T., "The interparticulate friction behavior of acetal copolymer pellets with bilobal and trilobal cross-sections", Polymer Engineering & Science, vol. 31, pp. 1637-1646, 1991.
49. LOVEGROVE J.G.A., WILLIAMS J.G., "Pressure generation mechanisms in the feed section of screw extruders", Polymer Engineering & Science, vol. 14, pp. 589-594, 1974.
50. MADDOCK P.G., "A visual analysis of flow and mixing in extruder screws", Society of Plastics Engineers Journal, vol. 15, pp. 383-389, 1959.
51. MAILLEFER C., "Boudineuse à vis", Swiss Patent no. 363149, 1959.
52. MANAS-ZLOCZOWER I., "Basic concepts", in MANAS-ZLOCZOWER I. (ed.), Mixing and Compounding of Polymers, Hanser, Munich, 2009.
53. MANAS-ZLOCZOWER I., FEKE D.L., "Dispersive mixing of solid additives", in MANAS-ZLOCZOWER I. (ed.), Mixing and Compounding of Polymers, Hanser, Munich, 2009.
54. MICHELANGELLI O.P., YAMANOI M., GASPAR-CUNHA A., et al., "Modelling pellet flow in single screw extrusion with DEM", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, vol. 225, pp. 255-268, 2011.
55. MOYSEY P.A., THOMPSON M.R., "Investigation of solids transport in a single-screw using a 3-D discret particle simulation", Polymer Engineering & Science, vol. 42, pp. 2203-2215, 2004.
56. POTENTE H., POHL T.C., "Polymer pellet flow out of the hopper into the first section of a single screw", International Polymer Processing, vol. 17, pp. 11-21, 2002.
57. POTENTE H., SCHOPPNER V., "Bulk-density of plastic pellets in a screw channel", International Polymer Processing, vol. 10, pp. 10-14, 1995.
58. RAUWENDAAL C., Polymer Extrusion, 4th ed., Hanser, Munich, 2001.
59. RAUWENDAAL C., "Mixing in single screw extruders", in MANASZLOCZOWER I. (ed.), Mixing and Compounding of Polymers, Hanser, Munich, 2009.
60. SCHNEIDER K., "Frictional properties of granulated plastics", Kunststoffe, vol. 59, pp. 97-102, 1969.
61. SPALDING M.A., HYUN K.S., "Coefficients of dynamic friction as a function of temperature, pressure and velocity for several polyethylene resins", Polymer Engineering & Science, vol. 35, pp. 557-563, 1995.
62. SPALDING M.A., HYUN K.S., HUGHES K.R., "Stress distribution in solid polymer compacts", The Journal of Reinforced Plastics and Composites, vol. 16, pp. 1231-1241, 1997.
63. SQUIRES P.H., "Screw extruder pumping efficiency", SPEJ., vol. 14, pp. 24-30, 1958.
64. STEVENS M.J., COVAS J.A., Extrusion, Principles and Operation, Chapman & Hall, London, 1995.
65. TADMOR Z., KLEIN I., Engineering Principles of Plasticating Extrusion, Van Nostrand Rheinhold, New York, 1970.
66. TEDDER W., "A new theory of solid conveying in single-csrew extruders", SPEJ, vol. 27, pp. 68-73, 1971.
67. VALETTE R., COUPEZ T., DAVID C., et al., "A direct 3D numerical simulation code for extrusion and mixing processes", International Polymer Processing, vol. 24, pp. 141-147, 2009.
68. VERGNES B., PUISSANT S., "Extrusion monovis. Partie 1", Techniques de l'Ingénieur, vol. AM3650, pp. 1-16, 2002.
69. ZHANG S., SERNAS V., "Incompressible model of solids conveying in a single-screw extruder", The Journal of Reinforced Plastics and Composites, vol. 21, pp. 1399-1409, 2002.
70. AGASSANT J.-F., POITOU A., VALETTE R., "A kinematic approach to distributive mixing", in MANAS-ZLOCZOWER I. (ed.), Mixing and Compounding of Polymers, Hanser, Munich, 2009.
71. AGASSANT J.-F., AVENAS P., SERGENT J.-P., et al., Mise en forme des matières polymères. Approche thermomécanique de la plasturgie, Tec & Doc, Lavoisier, Paris, 2014.
72. ALSTEENS B., LEGAT V., AVALOSSE T., "Parametric study of the mixing efficiency in a kneading block section of a twin-screw extruder", International Polymer Processing, vol. 19, pp. 207-217, 2004.
73. ALTOMARE R.E., GHOSSI P., "An analysis of residence time distribution in a twin screw cooking extruder", Biotechnology Progress, vol. 2, pp. 157-163, 1986.
74. AVALOSSE T., "Numerical simulation of distributive mixing in 3-D flows", Macromolecular Symposia, vol. 112, pp. 91-98, 1996.
75. BAHLOUL W., ODDES O., BOUNOR-LEGARÉ V., et al., "Reactive extrusion processing of polypropylene/TiO2 nanocomposites by in-situ synthesis of the nanofillers", AIChE Journal, vol. 57, pp. 2174-2184, 2011.
76. BARRÈS C., VERGNES B., TAYEB J., "An improved thermal model for the solid conveying section of a twin-screw cooker-extruder", Journal of Food Engineering, vol. 15, pp. 167-185, 1991.
77. BARRÈS C., VERGNES B., TAYEB J., "Computation of residence time and energy distribution in the reverse screw element of a twin-screw cookerextruder", Journal of Food Engineering, vol. 16, pp. 215-237, 1992.
78. BAWISKAR S., WHITE J.L., "Solids conveying and melting in a starve fed self-wiping co-rotating twin screw extruder", International Polymer Processing, vol. 10, pp. 105-110, 1995.
79. BAWISKAR S., WHITE J.L., "Melting model for modular self wiping corotating twin screw extruders", Polymer Engineering & Science, vol. 38, pp. 727-740, 1998.
80. BERTRAND F., TANGUY P.A., THIBAULT F., "A three-dimensional fictitious domain method for incompressible fluid flow problems", International Journal for Numerical Methods in Fluids, vol. 25, pp. 719-736, 1997.
81. BERZIN F., Etude expérimentale et modélisation d'une opération d'extrusion réactive, PhD Thesis, Paris School of Mines, 1998.
82. BERZIN F., VERGNES B., "Transesterification of ethylene acetate copolymer in a twin screw extruder", International Polymer Processing., vol. 13, pp. 13-22, 1998.
83. BERZIN F., VERGNES B., DUFOSSÉ P., et al., "Modelling of peroxide initiated controlled degradation of polypropylene in a twin screw extruder", Polymer Engineering & Science, vol. 40, pp. 344-356, 2000.
84. BERZIN F., VERGNES B., DELAMARE L., "Rheological behavior of controlled-rheology polypropylenes obtained by peroxide promoted degradation during extrusion: comparison between homopolymer and copolymer", Journal of Applied Polymer Science, vol. 80, pp. 1243-1252, 2001.
85. BERZIN F., VERGNES B., LAFLEUR P.G., et al., "A theoretical approach of solid filler dispersion in a twin screw extruder", Polymer Engineering & Science, vol. 42, pp. 473-481, 2002.
86. BERZIN F., HU G.H., "Procédés d'extrusion reactive", Techniques de l'Ingénieur, vol. AM3654, pp. 1-16, 2003.
87. BERZIN F., VERGNES B., CANEVAROLO S.V., et al., "Evolution of peroxide-induced degradation of polypropylene along a twin-screw extruder: experimental data and theoretical predictions", Journal of Applied Polymer Science, vol. 99, pp. 2082-2090, 2006.
88. BERZIN F., TARA A., TIGHZERT L., et al., "Computation of starch cationization performances by twin screw extrusion", Polymer Engineering & Science, vol. 47, pp. 112-119, 2007.
89. BERZIN F., TARA A., VERGNES B., "Optimization and scale-up of thermoplastic wheat starch cationization in a twin screw extruder", Polymer Engineering & Science, vol. 47, pp. 814-823, 2007.
90. BLEIMAN P., BULTERS M., ELEMANS P., et al., "Melting model for corotating twin screw extruder", SPE ANTEC Technical Papers, vol. 1, pp. 355-359, 2002.
91. BOHIN F., FEKE D.L., MANAS-ZLOCZOWER I., "Analysis of power requirements and dispersion quality in batch compounding using a dispersion model for single agglomerates", Rubber Chemistry and Technology, vol. 69, pp. 1-7, 1996.
92. BOHIN F., MANAS-ZLOCZOWER I., FEKE D.L., "Kinetics of dispersion for sparse agglomerates in simple shear flows: ppplication to silica agglomerates in silicone polymers", Chemical Engineering Science, vol. 51, pp. 5193-5204, 1996.
93. BOOY M.L., "Geometry of fully wiped twin screw equipments", Polymer Engineering & Science, vol. 18, pp. 973-984, 1978.
94. BOOY M.L., "Isothermal flow of viscous liquids in corotating twin screw devices", Polymer Engineering & Science, vol. 20, pp. 1220-1228, 1980.
95. BRAVO V.L., HRYMAK A.N., WRIGHT J.D., "Numerical simulation of pressure and velocity profiles in kneading elements of a co-rotating twin screw extruder", Polymer Engineering & Science, vol. 40, pp. 525-541, 2000.
96. BRAVO V.L., HRYMAK A.N., WRIGHT J.D., "Study of particle trajectories, residence times and flow behavior in kneading discs of intermeshing co-rotating twin-screw extruders", Polymer Engineering & Science, vol. 44, pp. 779-793, 2004.
97. CARSLAW H.S., JAEGER J.C., Conduction of Heat in Solids, Oxford University Press, Oxford, 1959.
98. CARROT C., GUILLET J., MAY J.F., et al., "Modeling of the conveying of solid polymer in the feeding zone of intermeshing co-rotating twin screw extruders", Polymer Engineering & Science, vol. 33, pp. 700-708, 1993.
99. CARNEIRO O.S., COVAS J.A., VERGNES B., "Experimental and theoretical study of the twin screw extrusion of polypropylene", Journal of Applied Polymer Science, vol. 78, pp. 1419-1430, 2000.
100. CASSAGNAU P., MIJANGOS C., MICHEL A., "An ultraviolet method for the determination of the residence time distribution in a twin screw extruder", Polymer Engineering & Science, vol. 31, pp. 772-778, 1991.
101. CHAN H.T., DUFRESNE D.A., "Kneading block melting study" SPE ANTEC Technical Papers, pp. 302-311, 1995.
102. CHALAMET Y., TAHA M., BERZIN F., et al., "Carboxyl terminated polyamide 12 chain extension by reactive extrusion using a dioxazoline coupling agent. Part II: effects of extrusion conditions", Polymer Engineering & Science, vol. 42, pp. 2317-2327, 2002.
103. CHESTERS A.K., "The modeling of coalescence processes in fluid liquid dispersions - a review of current understanding", Chemical Engineering Research and Design, vol. 69, pp. 259-270, 1991.
104. CHEN L.Q., PAN Z.Q., HU G.H., "Residence time distribution in screw extruders", AIChE Journal, vol. 39, pp. 1455-1464, 1993.
105. CHEN Z., WHITE J.L., "Simulation of non-isothermal flow in twin screw extrusion", International Polymer Processing, vol. 9, pp. 310-318, 1994.
106. CHENG H.F., MANAS-ZLOCZOWER I., "Study of mixing efficiency in kneading discs of co-rotating twin screw extruders", Polymer Engineering & Science, vol. 37, pp. 1082-1090, 1997.
107. DANCKWERTS P.V., "Continuous flow systems: distribution of residence times", Chemical Engineering Science, vol. 2, pp. 1-13, 1953.
108. DELLA VALLE G., BARRÈS C., PLEWA J., et al., "Computer simulation of starchy products transformation by twin-screw extrusion", Journal of Food Engineering, vol. 19, pp. 1-31, 1993.
109. DELAMARE L., Evolution morphologique d'un mélange de polymères incompatibles dans une extrudeuse bi-vis corotative, PhD Thesis, Paris School of Mines, 1995.
110. DELAMARE L., VERGNES B., "Computation of the morphological changes of a polymer blend along a twin screw extruder", Polymer Engineering & Science, vol. 36, pp. 1685-1693, 1996.
111. DELLA VALLE G., BERZIN F., VERGNES B., "Modelling of twin screw extrusion process for food products design and process optimization", in MASKAN M., ALTAN A. (eds), Advances in Food Extrusion Technology, CRC Press, Boca Raton, pp. 327-354, 2011.
112. DENSON C.D., HWANG B.K., "The influence of the axial pressure gradient on flow rate for Newtonian liquids in a self-wiping co-rotating twin screw extruder", Polymer Engineering & Science, vol. 20, pp. 965-971, 1980.
113. DOMSCHKE T., JUSTUS C., "Heat-transfer in single and twin-screw extruders", International Polymer Processing, vol. 8, pp. 294-307, 1993.
114. DOMENECH T., Structure et propriétés de nanocomposites polypropylène/argile lamellaire préparés par mélange à l'état fondu, PhD Thesis, Paris School of Mines, 2012.
115. DOMENECH T., BONNY S., PEUVREL-DISDIER E., et al., "Influence of twin-screw processing conditions on structure and properties of polypropylene -organoclay nanocomposites", International Polymer Processing, vol. 27, pp. 517-526, 2012.
116. DOMENECH T., PEUVREL-DISDIER E., VERGNES B., "The importance of specific mechanical energy during twin screw extrusion of organoclay based polypropylene nanocomposites", Composites Science and Technology, vol. 75, pp. 7-14, 2013.
117. DURIN A., Modélisation du mélange de polymères chargés et de la casse de fibres rigides en extrusion bivis, PhD Thesis, Paris School of Mines, 2012.
118. DURIN A., DE MICHELI P., VILLE J., et al., "A matricial approach of fiber breakage in twin-screw extrusion of glass fibers reinforced thermoplastics", Composites Part A, vol. 48, pp. 47-56, 2013.
119. ELMENDORP J.J., VAN DER VEGT A.K., "A study on polymer blending microrheology. Part IV: the influence of coalescence on blend morphology origination", Polymer Engineering & Science, vol. 26, pp. 1332-1338, 1986.
120. FUKUSHIMA Y., INAGAKI S., "Synthesis of an intercalated compound of montmorillonite and 6-polyamide", Journal of Inclusion Phenomena, vol. 5, pp. 473-482, 1987.
121. FUKUOKA T., MIN K., "Numerical non-isothermal flow analysis of non-Newtonian fluid in a non-intermeshing counter-rotating twin screw extruder", Polymer Engineering & Science, vol. 34, pp. 1033-1046, 1994.
122. FUNATSU K., KIHARA S.I., MIYAZAKI M., et al., "3-D numerical analysis on the mixing performance for assemblies with filled zone of right-handed and lefthanded double-flighted screws and kneading blocks in twin-screw extruders", Polymer Engineering & Science, vol. 42, pp. 707-723, 2002.
123. GALAKTIONOV O.S., ANDERSON P.D., PETERS G.W.M., et al., "Mapping approach for 3D laminar mixing simulations: application to industrial flows", International Journal for Numerical Methods in Fluids, vol. 40, pp. 345-351, 2002.
124. GAO J., WALSH G.C., BIGIO D., et al., "Residence-time distribution model for twin-screw extruders", AIChE Journal, vol. 45, pp. 2541-2549, 1999.
125. GASPAR-CUNHA A., POULESQUEN A., VERGNES B., et al., "Optimization of processing conditions for polymer twin-screw extrusion", International Polymer Processing, vol. 17, pp. 201-213, 2002.
126. GASPAR-CUNHA A., VERGNES B., COVAS J.A., "Defining the configuration of co-rotating twin-screw extruders with multi-objective evolutionary algorithms", Polymer Engineering & Science, vol. 45, pp. 1169-1173, 2005.
127. GASPAR-CUNHA A., COVAS J.A., VERGNES B., et al., "Reactive extrusionoptimization of representative processes", in GASPAR-CUNHA A., COVAS J.A. (eds), Optimization of Polymer Processing, Nova Science Publishers, New York, pp. 115-143, 2011.
128. GIMENEZ J., BOUDRIS M., CASSAGNAU P., et al., "Control of bulk ε-caprolactone polymerization in a twin screw extruder", Polymer Reaction Engineering, vol. 8, pp. 135-157, 2000.
129. GOGOS C.C., TADMOR Z., KIM M.H., "Melting phenomena and mechanisms in polymer processing equipment", Advances in Polymer Technology, vol. 17, pp. 285-305, 1998.
130. GRACE H.P., "Dispersion phenomena in high-viscosity immiscible fluid systems and application of static mixers as dispersion devices in such systems", Chemical Engineering Communications, vol. 14, pp. 225-277, 1982.
131. GUO Y., ZHU F., "Study of the different flow patterns in the melting section of a co-rotating twin screw extruder", Polymer Engineering & Science, vol. 43, pp. 306-316, 2003.
132. HUANG H.X., PENG Y.C., "Theoretical modeling of dispersive melting mechanism of polymers in an extruder", Advances in Polymer Technology, vol. 12, pp. 343-352, 1993.
133. HUNEAULT M.A., SHI Z.H., UTRACKI L.A., "Development of polymer blend morphology during compounding in a twin-screw extruder. Part IV: a new computational model with coalescence", Polymer Engineering & Science, vol. 35, pp. 115-127, 1995.
134. INCEOGLU F., VILLE J., GHAMRI N., et al., "Correlation between processing conditions and fiber breakage during compounding of glass fiberreinforced polyamide", Polymer Composites, vol. 32, pp. 1842-1850, 2011.
135. ISHIKAWA T., KIHARA S.I., FUNATSU K., "3-D numerical simulations of nonisothermal flow in rotating twin screw extruders", Polymer Engineering & Science, vol. 40, pp. 357-364, 2000.
136. ISHIKAWA T., KIHARA S.I., FUNATSU K., "3-D non-isothermal flow field analysis and mixing performance evaluation of kneading blocks in a corotating twin screw extruder", Polymer Engineering & Science, vol. 41, pp. 840-849, 2001.
137. JANSSEN L.P.B.M., Twin Screw Extrusion, Elsevier, Amsterdam, 1978.
138. JONGBLOED H.A., KIEWIET J.A., VANDIJK J.H., et al., "The self-wiping co-rotating twin-screw extruder as a polymerization reactor for methacrylates", Polymer Engineering & Science, vol. 35, pp. 1569-1579, 1995.
139. KAJIWARA T., NAGASHIMA Y., NAKANO Y., et al., "Numerical study of twin-screw extruders by three-dimensional flow analysis - development of analysis technique and evaluation of mixing performances for full flight screws", Polymer Engineering & Science, vol. 36, pp. 2142-2152, 1996.
140. KALYON D.M., GOTSIS A.D., YILMAZER U., et al., "Development of experimental techniques and simulation methods to analyze mixing in co-rotating twin screw extrusion", Advances in Polymer Technology, vol. 8, pp. 337-353, 1988.
141. KALYON D.M., MALIK M., "An integrated approach for numerical analysis of coupled flow and heat transfer in co-rotating twin screw extruders", International Polymer Processing, vol. 22, pp. 293-302, 2007.
142. KRELL M.J., BRANDOLIN A., VALLES E.M., "Controlled rheology polypropylenes - an improved model with experimental validation for the singlescrew extruder process", Polymer Reaction Engineering, vol. 2, pp. 389-408, 1994.
143. KRISHNAMOORTI R., REN J.X., SILVA A.S., "Shear response of layered silicate nanocomposites", Journal of Chemical Physics, vol. 114, pp. 4968-4973, 2001.
144. LARSEN H., JONES A., "Heat transfer in twin screw extruders", SPE Technical Papers, vol. 34, pp. 67-70, 1988.
145. LERTWIMOLNUN W., VERGNES B., "Influence of compatibilizer and processing conditions on the dispersion of nanoclay in a polypropylene matrix", Polymer, vol. 46, pp. 3462-3471, 2005.
146. LERTWIMOLNUN W., Réalisation de nanocomposites polypropylène/argile par extrusion bivis, PhD Thesis, Paris School of Mines, 2006.
147. LERTWIMOLNUN W., VERGNES B., "Effect of processing conditions on the formation of polypropylene/organoclay nanocomposites in a twin screw extruder", Polymer Engineering & Science, vol. 46, pp. 314-323, 2006.
148. LERTWIMOLNUN W., VERGNES B., "Influence of screw profile and extrusion conditions on the microstructure of polypropylene/organoclay nanocomposites", Polymer Engineering & Science, vol. 47, pp. 2100-2109, 2007.
149. LIU T., WONG A.C.Y., ZHU F., "Prediction of screw length required for polymer melting and melting characteristics", International Polymer Processing, vol. 16, pp. 113-123, 2001.
150. LORD R., "On the instability of cylindrical fluid surfaces", Philosophical Magazine Series 5, vol. 34, pp. 177-180, 1892.
151. LOZANO T., LAFLEUR P.G., GRMELA M., "A chemical model for the dispersion of fillers in a polymeric matrix", Canadian Journal of Chemical Engineering, vol. 80, pp. 1135-1142, 2002.
152. LOZANO T., LAFLEUR P.G., GRMELA M., et al., "Modeling filler dispersion along a twin screw extruder", International Polymer Processing, vol. 18, pp. 12-19, 2003.
153. MANAS-ZLOCZOWER I., CHENG H.F., "Influence of design on mixing efficiency in the kneading disc region of co-rotating twin screw extruders", Journal of Reinforced Plastics and Composites, vol. 17, pp. 1076-1086, 1998.
154. MANAS-ZLOCZOWER I., Mixing and Compounding of Polymers: Theory and Practice, 2nd ed., Hanser, Munich, 2009.
155. MEIJER H.E.H., ELEMANS P.H.M., "The modeling of continuous mixers. Part 1: the corotating twin-screw extruder", Polymer Engineering & Science, vol. 28, pp. 275-290, 1988.
156. MEIJER H.E.H., LEMSTRA P.J., ELEMANS P.H.M., "Structured polymer blends", Makromolekular Chemie, Macromolecular Symposium, vol. 16, pp. 113-135, 1988.
157. MOURS M., REINELT D., WAGNER H.G., et al., "Melt conveying in corotating twin screw extruders - experiment and numerical simulation", International Polymer Processing, vol. 15, pp. 124-132, 2000.
158. MOUAZEN M., POULESQUEN A., VERGNES B., "Influence of extrusion conditions on the rheological behavior of nuclear bituminized waste products (BWP)", International Polymer Processing, vol. 26, pp. 569-579, 2011.
159. NOÉ I., Etude des écoulements de polymères dans une extrudeuse bivis co-rotative, PhD Thesis, Paris School of Mines, 1992.
160. OBERLEHNER K., CASSAGNAU P., MICHEL A., "Local residence time distribution in a twin-screw extruder", Chemical Engineering Science, vol. 49, pp. 3897-3907, 1994.
161. OKADA A., KAWASUMI M., KURAUCHI T., et al., "Synthesis and characterization of a nylon 6-clay hybrid", American Chemical Society, Polymer Preprints, vol. 28, pp. 447-448, 1987.
162. PANDYA J.D., SPIELMAN L.A., "Floc breakage in agitated suspensions: theory and data processing strategy", Journal of Colloid and Interface Science, vol. 90, pp. 517-531, 1982.
163. POTENTE H., ANSAHL J., WITTEMEIER R., "Throughput characteristics of tightly intermeshing co-rotating twin screw extruders", International Polymer Processing, vol. 5, pp. 208-216, 1990.
164. POTENTE H., ANSAHL J., KLARHOLZ B., "Design of tightly intermeshing co-rotating twin screw extruders", International Polymer Processing, vol. 9, pp. 11-25, 1994.
165. POTENTE H., MELISCH U., PALLUCH K.P., "A physico-mathematical model for solids conveying in co-rotating twin screw extruders", International Polymer Processing, vol. 11, pp. 29-41, 1996.
166. POTENTE H., MELISCH U., "Theoretical and experimental investigations of the melting of pellets in co-rotating twin screw extruders", International Polymer Processing, vol. 11, pp. 101-108, 1996.
167. POULESQUEN A., Contribution à la modélisation de l'extrusion réactive en machine bivis, PhD Thesis, Paris School of Mines, 2001.
168. POULESQUEN A., VERGNES B., CASSAGNAU P., et al., "Polymerization of ε-caprolactone in a twin screw extruder: experimental study and modelling", International Polymer Processing, vol. 16, pp. 31-38, 2001.
169. POULESQUEN A., VERGNES B., "A study of residence time distribution in co-rotating twin screw extruders. Part I: theoretical modelling", Polymer Engineering & Science, vol. 43, pp. 1841-1848, 2003.
170. POULESQUEN A., VERGNES B., CASSAGNAU P., et al., "A study of residence time distribution in co-rotating twin screw extruders. Part II: experimental validation", Polymer Engineering & Science, vol. 43, pp. 1849-1862, 2003.
171. QIAN B.N., GOGOS C.G., "The importance of plastic energy dissipation (PED) to the heating and melting of polymer particulates in intermeshing co-rotating twin-screw extruders", Advances in Polymer Technology, vol. 19, pp. 287-299, 2000.
172. RAUWENDAAL C., Polymer Extrusion, 4th ed., Hanser, Munich, 2001.
173. REDL A., MOREL M.H., BONICEL J., et al., "Extrusion of wheat gluten plasticized with glycerol: influence of process conditions on flow behavior, rheological properties and molecular size distribution", Cereal Chemistry, vol. 76, pp. 361-370, 1999.
174. RWEI S.P., MANAS-ZLOCZOWER I., FEKE D., "Observation of carbonblack agglomerate dispersion in simple shear flows", Polymer Engineering & Science, vol. 30, pp. 701-706, 1990.
175. RWEI S.P., MANAS-ZLOCZOWER I., FEKE D., "Analysis of dispersion of carbon-black in polymeric melts and its effect on compound properties", Polymer Engineering & Science, vol. 32, pp. 130-135, 1992.
176. SZYDLOWSKI W., BRZOSKOWSKI R., WHITE J.L., "Modeling flow in an intermeshing co-rotating twin screw extruder: flow in kneading discs", International Polymer Processing, vol. 1, pp. 207-214, 1987.
177. SZYDLOWSKI W., WHITE J.L., "A non-Newtonian model of flow in a kneading disk region of a modular intermeshing corotating twin screw extruder", Journal of Non-Newtonian Fluid Mechanics, vol. 28, pp. 29-46, 1988.
178. TARA A., BERZIN F., TIGHZERT L., et al., "Preparation of cationic wheat starch by twin-screw reactive extrusion", Journal of Applied Polymer Science, vol. 93, pp. 201-208, 2004.
179. TAYLOR G.I., "The viscosity of a fluid containing small drops of another fluid", Proceedings of the Royal Society, vol. A138, pp. 41-48, 1932.
180. TAYEB J., VERGNES B., DELLA VALLE G., "Theoretical computation of the isothermal flow through the reverse screw element of a twin-screw extrusion cooker", Journal of Food Science, vol. 53, pp. 616-625, 1988.
181. TAYEB J., VERGNES B., DELLA VALLE G., "A basic model for a twinscrew extruder", Journal of Food Science, vol. 54, pp. 1047-1056, 1989.
182. TAYEB J., DELLA VALLE G., BARRES C., et al., "Simulation of transport phenomena in twin-screw extruders", in KOKINI J.L., HO C.T., KARWE M.V. (eds), Food Extrusion, Science and Technologies, Marcel Dekker, New York, 1992.
183. TEIXEIRA C., COVAS J.A., BERZIN F., et al., "Applications of evolutionary algorithms for the definition of optimal twin-screw extruder configuration for starch cationisation", Polymer Engineering & Science, vol. 51, pp. 330-340, 2011.
184. TODD D.B., "Residence time distribution in twin-screw extruders", Polymer Engineering & Science, vol. 15, pp. 437-443, 1975.
185. TODD D.B., "Heat transfer in twin screw extruders", SPE ANTEC Technical Papers, vol. 34, pp. 54-58, 1988.
186. TODD D.B., "Melting of plastics in kneading blocks", International Polymer Processing, vol. 8, pp. 113-118, 1993.
187. TOMOTIKA S., "On the instability of a cylindrical thread of a viscous liquid surrounded by another viscous fluid", Proceedings of the Royal Society, vol. A150, pp. 322-337, 1935.
188. TOMOTIKA S., "Breaking up of a drop of viscous liquid immersed in another viscous fluid which is extending at a uniform rate", Proceedings of the Royal Society, vol. A153, pp. 302-318, 1936.
189. TZOGANAKIS C., VLACHOPOULOS J., HAMIELEC A.E., "Modeling of the peroxide degradation of polypropylene", International Polymer Processing, vol. 3, pp. 141-150, 1988.
190. UTRACKI L.A., Polymer Blends Handbook, Kluwer, Dordrecht, 2002.
191. VALETTE R., BRUCHON J., DIGONNET H., et al., "Méthodes d'interaction fluide-structure pour la simulation multi-échelles des procédés de mélange", Mécanique et Industrie, vol. 8, pp. 251-258, 2007.
192. VALETTE R., COUPEZ T., DAVID C., et al., "A direct 3D numerical simulation code for extrusion and mixing processes", International Polymer Processing, vol. 24, pp. 141-147, 2009.
193. VERGNES B., DELLA VALLE G., DELAMARE L., "A global computer software for polymer flows in co-rotating twin screw extruders", Polymer Engineering & Science, vol. 38, pp. 1781-1792, 1998.
194. VERGNES B., CHAPET M., "Procédés d'extrusion bivis", Techniques de l'Ingénieur, vol. AM3653, pp. 1-23, 2001.
195. VERGNES B., SOUVETON G., DELACOUR M.L., et al., "Experimental and theoretical study of polymer melting in a co-rotating twin screw extruder", International Polymer Processing, vol. 16, pp. 351-362, 2001.
196. VERGNES B., BERZIN F., "Modelling of reactive systems in twin screw extrusion: challenges and applications", Comptes Rendus Chimie, vol. 9, pp. 1409-1418, 2006.
197. VERGNES B., LERTWIMOLNUN W., "Impact of processing conditions on the morphology, structure and properties of polymer-organoclay nanocomposites", in SABU T., GENNADY Z. (eds), Polymer Nanocomposite Research Advances, Nova Science Publishers, New York, 2008.
198. VERGNES B., "The use of apparent yield stress to characterize exfoliation in polymer nanocomposites", International Polymer Processing, vol. 26, pp. 229-232, 2011.
199. VILLE J., INCEOGLU F., GHAMRI N., et al., "Influence of extrusion conditions on fiber breakage along the screw profile during twin screw compounding of glass fiber-reinforced polyamide", International Polymer Processing, vol. 28, pp. 49-57, 2013.
200. WANG Y., WHITE J.L., SZYDLOWSKI W., "Flow in a modular intermeshing co-rotating twin screw extruder", International Polymer Processing, vol. 4, pp. 262-269, 1989.
201. WARD N.J., EDWARDS H.G.M., JOHNSON A.F., et al., "Application of Raman spectroscopy for determining residence time distribution in extruder reactors", Applied Spectroscopy, vol. 50, pp. 812-815, 1996.
202. WERNER H., Das Betriebsverhalten der Zweiwelligen Knetscheiben Schnecken-presse von Type ZSK bei der Verarbeitung von hochviskosen Flüssigkeiten, PhD Thesis, University of Munich, 1976.
203. WHITE J.L., SZYDLOWSKI W., MIN K., et al., "Twin screw extruders: development of technology and analysis of flow", Advances in Polymer Technology, vol. 7, pp. 295-332, 1987.
204. WHITE J.L., CHEN Z., "Simulation of non-isothermal flow in modular corotating twin-screw extrusion", Polymer Engineering & Science, vol. 34, pp. 229-237, 1994.
205. WHITE J.L., CORAN A.Y., MOET A., Polymer Mixing: Technology and Engineering, Hanser, Munich, 2001.
206. WHITE J.L., KIM E.K., Twin Screw Extrusion: Technology and Principle, 2nd ed., Hanser, Munich, 2010.
207. WOLF D., HOLIN N., WHITE D.H., "Residence time distribution in a commercial twin-screw extruder", Polymer Engineering & Science, vol. 26, pp. 640-646, 1986.
208. WU S., "Formation of dispersed phase in incompatible polymer blends: interfacial and rheological effects", Polymer Engineering & Science, vol. 27, pp. 335-343, 1987.
209. WYMAN C.E., "Theoretical model for intermeshing twin screw extruders: axial velocity profile for shallow channels", Polymer Engineering & Science, vol. 15, pp. 606-611, 1975.
210. XANTHOS M., Reactive Extrusion: Principles and Practice, Hanser, Munich, 1992.
211. YANG H.H., MANAS-ZLOCZOWER I., "Flow field analysis of the kneading disk region in a co-rotating twin screw extruder", Polymer Engineering & Science, vol. 32, pp. 1411-1417, 1992.
212. YOSHINAGA M., KATSUKI S., MIYAZAKI M., et al., "Mixing mechanism of three-tip kneading block in twin screw extruders", Polymer Engineering & Science, vol. 40, pp. 168-178, 2000.
213. ZHU L., GENG X., "Visual research of melting mechanism of polymer pellets in intermeshing co-rotating twin screw extrusion", SPE ANTEC Technical Papers, vol. 1, pp. 370-374, 1999.
214. ZHU L, NAHR K.A., GENG X., "Modeling of particle-dispersed melting mechanism and its application in co-rotating twin screw extrusion", Journal of Polymer Science, Part B: Polymer Physics, vol. 39, pp. 2461-2468, 2001.
215. ABBAD H., Optimisation de filières d'extrusion de briques, Mémoire de mastère spécialisé, Ecole des Mines de Paris, 2003.
216. AGASSANT J.-F., AVENAS P., SERGENT J.-P., et al., Mise en forme des matières polymères. Approche thermomécanique de la plasturgie, Tec et Doc, Lavoisier, Paris, 2014.
217. BEAUMIER D., Conception des filières d'extrusion pour les profilés multiformes, Mémoire de maîtrise, Ecole Polytechnique de Montréal, 2011.
218. BIRD R.B., STEWART W.E., LIGHTFOOT E.N., Transport Phenomena, Wiley, New York, 2007.
219. CARNEIRO O.S., NOBREGA J.M., Design of Extrusion Forming Tools, Smithers Rapra, Shawbury, 2012.
220. ETTINGER H.J., PITTMAN J.F.T., SIENZ J., "Optimization-driven design of dies for profile extrusion: parameterization, strategy, and performance", Polymer Engineering & Science, vol. 53, pp. 189-203, 2013.
221. HAUDIN J.M., VINCENT M., VERGNES B., "Pipe forming tools", in CARNEIRO O.S., NOBREGA J.M. (eds), Design of Extrusion Forming Tools, Smithers Rapra, Shawbury, 2012.
222. HUNEAULT M.A., L'extrusion des profilés en PVC: rhéologie et conception des filières, PhD Thesis, École Polytechnique de Montréal, 1992.
223. HUNEAULT M.A., LAFLEUR P.G., CARREAU P.J., "Evaluation of the FAN technique for profile die design", International Polymer Processing, vol. 11, pp. 50-57, 1996.
224. HUREZ P., TANGUY P.A., BLOUIN D., "A new design procedure for profile extrusion dies", Polymer Engineering & Science, vol. 36, pp. 626-635, 1996.
225. KOZIEY B.L., VLACHOPOULOS J., VLCEK J., et al., "Profile die design by pressure balancing and cross flow minimization", SPE ANTEC Technical Papers, vol. 3, pp. 247-252, 1996.
226. LEGAT V., MARCHAL J.M., "Die design: an implicit formulation for the inverse problem", International Journal for Numerical Methods in Fluids, vol. 16, pp. 29-42, 1993.
227. MENDELSON R.A., FINGER F.L., BAGLEY E.B., "Die swell and recoverable shear strain in polyethylene extrusion", Journal of Polymer Science Part C: Polymer Symposia, vol. 35, pp. 177-188, 1971.
228. MICHAELI W., Extrusion Dies for Plastics and Rubber, Hanser, Munich, 2003.
229. PITTMAN J.F.T., "Computer-aided design and optimization of profile extrusion dies for thermoplastics and rubber: a review", The Journal of Process Mechanical Engineering, vol. 225, pp. 280-321, 2011.
230. PUISSANT S., "Lignes d'extrusion de tubes. Etapes de fabrication", Techniques de l'Ingénieur, vol. AM3 642, pp. 1-20, 2006.
231. RAUWENDAAL C., Polymer Extrusion, Hanser, Munich, 2001.
232. SAILLARD P., Les phénomènes thermiques dans les outillages d'extrusion des matières plastiques, PhD Thesis, Paris School of Mines, 1982.
233. SAILLARD P., VERGNES B., AGASSANT J.F., "Study of the wall thickness defects encountered in PVC pipe extrusion", Polymer Process Engineering, vol. 2, pp. 53-68, 1984.
234. STEVENSON J.F., "Analysis of extrudate dimensions: die design, swell and drawdown", Plastics and Rubber Processing and Applications, vol. 5, pp. 325-334, 1985.
235. TANNER R.I., "A theory of die-swell", Journal of Polymer Science Part B: Polymer Physics, vol. 8, pp. 2067-2078, 1970.
236. VERGNES B., AGASSANT J.F., "Die flow computations: a method to solve industrial problems in polymer processing", Advances in Polymer Technology, vol. 6, pp. 441-446, 1986.
237. VERGNES B., AGASSANT J.F., "Modélisation des écoulements dans les filières d'extrusion", Techniques de l'Ingénieur, vol. AM3655, pp. 1-19, 2008.
238. ANDRÉ J.M., AGASSANT J.-F., DEMAY Y., et al., "Numerical modeling of the polymer film blowing process", International Journal of Forming Processes, vol. 1, pp. 197-210, 1998.
239. ANDRÉ J.M., Modélisation thermomécanique et structurale du soufflage de gaine de polyéthylènes, Doctoral Thesis, Paris School of Mines, 1999.
240. ARPIN B., LAFLEUR P. G., VERGNES B., "Simulation of polymer flow through a coat-hanger die: a comparison between two numerical approaches", Polymer Engineering & Science, vol. 32, pp. 206-212, 1992.
241. ARPIN B., LAFLEUR P.G., SANSCHAGRIN B., "A personal computer software program for coat-hanger die simulation", Polymer Engineering & Science, vol. 34, pp. 657-664, 1994.
242. ASHOK B.K., CAMPBELL G.A., "Two-phase simulation of tubular film blowing of crystalline polymers", International Polymer Processing, vol. 7, pp. 240-247, 1992.
243. AST W., "Air cooling of blown film", Kunststoffe, vol. 64, pp. 146-152, 1974.
244. BEAGAN C.M., MC NALLY G.M., MURPHY W.R., "The use of metallocene catalysed polyethylene as a blend material in blown film extrusion", Developments in Chemical Engineering and Mineral Processes, vol. 7, pp. 201-218, 1999.
245. CAIN J.J., DENN M.M., "Multiplicities and instabilities in film blowing", Polymer Engineering & Science, vol. 28, pp. 1527-1541, 1988.
246. CAMPBELL G.A., CAO B., "The interaction of crystallinity, elastoplasticity, and a two-phase model on blown film bubble shape", Journal of Plastics Film Sheeting, vol. 3, pp. 158-170, 1987.
247. CAMPBELL G.A., OBOT N.T., CAO B., "Aerodynamics in the blown film process", Polymer Engineering & Science, vol. 32, pp. 751-759, 1992.
248. CAO B., CAMPBELL G.A., "Air ring effect on blown film dynamics", International Polymer Processing, vol. 4, pp. 114-118, 1989.
249. COYLE D.J., PERDIKOULIAS J., "Flow simulation and visualization in spiral mandrel dies" SPE ANTEC Technical Papers, pp. 2445-2447, 1991.
250. DOUFAS A.K., MCHUGH A.J., MILLER C., "Simulation of melt spinning including flow-induced crystallization. Part I. Model development and predictions", Journal of Non-Newtonian Fluid Mechanics, vol. 92, pp. 27-66, 2000.
251. DOUFAS A.K., MCHUGH A.J., MILLER C., et al., "Simulation of melt spinning including flow-induced crystallization. Part II. Quantitative comparisons with industrial spinline data", Journal of Non-Newtonian Fluid Mechanics, vol. 92, pp. 81-103, 2000.
252. FARBER R., DEALY J., "Strain history of the melt in film blowing", Polymer Engineering & Science, vol. 14, pp. 435-440, 1974.
253. FLEISSNER M., "Elongational flow of HDPE samples and bubble instability in film blowing", International Polymer Processing, vol. 2, pp. 229-233, 1988.
254. FREDRICKSON A.G., BIRD R.B., "Non-Newtonian flow in annuli", Journal of Industrial and Engineering Chemistry, vol. 50, pp. 347-352, 1958.
255. GAMACHE E., Evaluation de la biréfringence en ligne et modélisation du procédé de soufflage de gaine multicouche, Doctoral Thesis, Ecole Polytechnique de Montréal, 2004.
256. GHANEH-FARD A., CARREAU P.J., LAFLEUR P.G., "Study of instabilities in film blowing", AIChE Journal, vol. 42, pp. 1388-1396, 1996.
257. GUPTA R.K., METZNER A.B., "Modelling of non isothermal polymer processes", Journal of Rheology, vol. 26, pp. 181-198, 1982.
258. HAN C.D., PARK J.Y., "Studies on blown film extrusion. III. Bubble instability", Journal of Applied Polymer Science, vol. 19, pp. 3291-3297, 1975.
259. HERNANDEZ R., SELKE S.E.M., CUTLER J., Plastics Packaging: Properties, Processing, Applications, Regulations, Hanser, Munich, 2000.
260. HOUSIADAS K., TSAMOPOULOS J., "Unsteady flow of an axisymmetric annular film under gravity", Physics of Fluids, vol. 10, pp. 2500-2516, 1998.
261. HOUSIADAS K., TSAMOPOULOS J., "Unsteady extrusion of a viscoelastic annular film I. General model and its numerical solution", Journal of Non-Newtonian Fluid Mechanics, vol. 88, pp. 229-259, 2000.
262. HOUSIADAS K., TSAMOPOULOS J., "Unsteady extrusion of a viscoelastic annular film. II. Linearized model and its analytical solution", Journal of Non-Newtonian Fluid Mechanics, vol. 88, pp. 303-325, 2000.
263. HOUSIADAS K., TSAMOPOULOS J., "Cooling of a viscoelastic film during unsteady extrusion from an annular die", Rheologica Acta, vol. 39, pp. 44-61, 2000.
264. HUANG C.C., "A systematic approach for the design of a spiral mandrel die", Polymer Engineering & Science, vol. 38, pp. 573-582, 1998.
265. KANAI T., WHITE J.L., "Kinematics, dynamics and stability of the tubular film extrusion of various polyethylenes", Polymer Engineering & Science, vol. 24, pp. 1185-1201, 1984.
266. KANAI T., "Theoretical analysis of tubular film extrusion and its applications for HMW-HDPE", International Polymer Processing, vol. 1, pp. 137-143, 1987.
267. LAFFARGUE J., PARENT L., LAFLEUR P.G., et al., "Investigation of bubble instabilities in film blowing process", International Polymer Processing, vol. 17, pp. 347-353, 2002.
268. LAFFARGUE J., Etude et modélisation des instabilités du procédé de soufflage de gaine, Doctoral Thesis, Paris School of Mines, 2003.
269. LASAUNIÈRE N., Etude des instabilités de bulle dans le procédé de soufflage de gaine de polyéthylène, Specialized Masters, Ecole des Mines de Paris, 1999.
270. LEBAAL N., SCHMIDT F., PUISSANT S., "Design and optimization of threedimensional extrusion dies, using constraint optimization algorithm", Finite Elements Analyse and Design, vol. 45, pp. 333-340, 2009.
271. LUO X.L., TANNER R.I., "A computer study of film blowing", Polymer Engineering & Science, vol. 25, pp. 620-629, 1985.
272. MAHDAOUI O., Etude numérique des instabilités dans le procédé de coextrusion des polyesters, Doctoral Thesis, Ecole des Mines de Paris, 2008.
273. MATSUBARA Y., "Geometry design of a coat-hanger die with uniform flow rate and residence time across the die width", Polymer Engineering & Science, vol. 19, pp. 169-172, 1979.
274. MCHUGH A.J., DOUFAS A.K., "Modeling flow-induced crystallization in fiber spinning", Composites Part A; Applied Science and Manufacturing, vol. 32A, pp. 1059-1066, 2001.
275. MENGES G., PREDOHL W.O., "Film blowing process of LDPE", SPE ANTEC Technical Papers, vol. 18, pp. 717-721, 1972.
276. MENDEZ-PRIETO A., SANCHEZ-VALDES S., "Multilayer structures using reprocessed coextruded LLDPE/TIE/PA-6 films", Journal of Polymer Engineering, vol. 18, pp. 221-234, 1998.
277. MENG K., WANG X., HUANG X., "Optimal design of the coat-hanger die used for producing melt-blown fabrics by finite element method and evolution strategies", Polymer Engineering & Science, vol. 49, pp. 354-358, 2009.
278. MINOSHIMA W., WHITE J.L., "Instability phenomena in tubular film, and melt spinning of rheologically characterized high-density, low-density and linear low-density polyethylenes", Journal of Non-Newtonian Fluid Mechanics, vol. 19, pp. 275-302, 1986.
279. MUSLET I.A., KAMAL M.R., "Computer simulation of the film blowing process incorporating crystallization and viscoelasticity", Journal of Rheology, vol. 48, pp. 525-550, 2004.
280. NAGARAJAN G., CAMPBELL G.A., "Experimental determination of heat transfer coefficient in blown film process" SPE ANTEC Technical Papers, pp. 162-166, 1995.
281. PEARSON J.R.A., PETRIE C.J.S., "The flow of a tubular film. Part 1. Formal mathematical representation", Journal of Fluid Mechanics, vol. 40, pp. 1-19, 1970.
282. PEARSON J.R.A., PETRIE C.J.S., "The flow of a tubular film. Part 2. Interpretation of the model and discussion of solutions", Journal of Fluid Mechanics, vol. 42, pp. 609-625, 1970.
283. PERDIKOULIAS J., TZOGANAKIs C., "Interfacial instability phenomena in blown film coextrusion of polyethylene resins", SPE ANTEC Technical Papers, vol. 53, pp. 176-180, 1995.
284. PERDIKOULIAS J., TZOGANAKIS C., "Interfacial instability in blown-film coextrusion of polyethylenes", Plastics Engineering, vol. 52, pp. 41-43, 1996.
285. PETRIE C.J.S., "Memory effects in a non-uniform flow. A study of the behavior of a tubular film of viscoelastic fluid", Rheologica Acta, vol. 12, pp. 92-99, 1973.
286. PETRIE C.J.S., "Mathematical modeling of heat transfer in film blowing", Plastics and Polymers, vol. 42, p. 259, 1974.
287. PETRIE C.J.S., "Comparison of theoretical predictions with published experimental measurements on the blown film process", AIChE J., vol. 21, pp. 275-282, 1975.
288. PETRIE C.J.S., "The analysis of polymer processing operations involving free surface elongational flows" Proceeding Conference Polymer Rheology and Plastics Processing, pp. 307-319, 1975.
289. SAILLARD P., AGASSANT J.F., "Polymer flow in a spiral mandrel die", Polymer Process Engineering, vol. 2, pp. 37-52, 1984.
290. SANCHEZ-VALDES S., YANEZ-FLORES I., GUERRERO-SALAZAR C. et al., "Characterization of LLDPE-LLDPEgMA blends by contact angle and FTIRATR studies", Journal of Polymer Engineering, vol. 17, pp. 257-268, 1997.
291. SIDIROPOULOS V., TIAN J.J., VLACHOPOULOS J., "Computer simulation of film blowing", Journal of Plastics Film Sheeting, vol. 2, pp. 107-129, 1996.
292. SIDIROPOULOS V., WOOD P.E., VLACHOPOULOS J., "The aerodynamics of cooling of blown film bubbles", Journal of Reinforced Plastics and Composites, vol. 18, pp. 529-538, 1999.
293. SIDIROPOULOS V., VLACHOPOULOS J., "The effects of dual-orifice air-ring design on blown film cooling", Polymer Engineering & Science, vol. 40, pp. 1611-1618, 2000.
294. SIDIROPOULOS V., VLACHOPOULOS J., "An investigation of Venturi and Coanda effects in blown film cooling", International Polymer Processing, vol. 15, pp. 40-45, 2000.
295. SIDIROPOULOS V., VLACHOPOULOS J., "Numerical study of internal bubble cooling (IBC) in film blowing", International Polymer Processing, vol. 16, pp. 48-53, 2001.
296. TADMOR Z., GOGOS C.G., Principles of Polymer Processing, Wiley, New York, 1979.
297. TADMOR Z., GOGOS C.G., Principles of Polymer Processing, 2nd ed., Wiley, New York, 2006.
298. VERGNES B., SAILLARD P., PLANTAMURA B., "Berechnungsmethoden für Breitschlitz-Extrusionwerkzeuge", Kunststoffe, vol. 70, pp. 751-753, 1980.
299. VERGNES B., SAILLARD P., AGASSANT J.F., "Non-isothermal flow of a molten polymer in a coat-hanger die", Polymer Engineering & Science, vol. 24, pp. 980-987, 1984.
300. VERGNES B., AGASSANT J.F., "Modélisation des écoulements dans les filières d'extrusion", AM 3655, Techniques de l'Ingénieur, Paris, 2008.
301. VLCEK J., PERDIKOULIAS J., VLACHOPOULOS J., "Determination of output uniformity from spiral mandrel dies", International Polymer Processing, vol. 2, pp. 174-181, 1988.
302. WANG Y., "The flow distribution of molten polymers in slit dies and coathanger dies through three-dimensional finite element analysis", Polymer Engineering & Science, vol. 31, pp. 204-2012, 1991.
303. WU T., JIANG B., XU S., et al., "Three-dimensional nonisothermal simulation of a coat hanger die", Journal of Applied Polymer Science, vol. 101, pp. 2911-2918, 2006.
304. WU T., JIANG B., XU S., et al., "Nonisothermal comprehensive 3D analysis of polymer melt flow in a coat-hanger die", Polymer Engineering & Science, vol. 46, pp. 406-415, 2006.
305. YOON K.S., PARK C.W., "A study on two-layer blown-film coextrusion" SPE ANTEC Technical Papers, pp. 2315-2317, 1991.
306. ZIPPENFELD R., "Possibilities for increasing production from air cooled film blowing equipment", Kunststoffe, vol. 61, pp. 147-151, 1971.
307. ZIABICKI A., "Kinetics of polymer crystallization and molecular orientation in the course of melt spinning", Applied Polymer Symposium, vol. 6, pp. 1-18, 1967.
308. BASU S., "A theoretical analysis of non-isothermal flow in wire-coating co-extrusion dies", Polymer Engineering & Science, vol. 21, pp. 1128-1138, 1981.
309. CASWELL B., TANNER R.I., "Wire coating die design using finite element methods", Polymer Engineering & Science, vol. 18, pp. 416-421, 1978.
310. CARLEY J.F., ENDO T., KRANTZ W.B., "Realistic analysis of flow in wirecoating dies", Polymer Engineering & Science, vol. 19, pp. 1178-1187, 1979.
311. CHUNG T.S., "The effect of melt compressibility on a high-speed wirecoating process", Polymer Engineering & Science, vol. 26, pp. 410-414, 1986.
312. EVERAGE Jr. A.E., BALLMAN R.L., "A mechanism for polymer melt or solution fracture", Journal of Applied Polymer Science, vol. 18, pp. 933-937, 1974.
313. FENNER R.T., WILLIAMS J.G., "Analytical methods of wire-coating die design", Translations of the Journal of Plastics Institute, vol. 35, pp. 701-706, 1967.
314. FENNER R.T., NADIRI F., "Finite element analysis of polymer melt flow in cable-covering crossheads". Polymer Engineering & Science, vol. 19, pp. 203-209, 1979.
315. HAAS K.U., SKEWIS F.H., "Wire coating process: die design and polymer flow characteristics", SPE ANTEC Technical Paper, vol. 20, pp. 8-12, 1974.
316. HAMMOND L.R., "The design of dies for high-speed coating", Wire and Wire Products, vol. 35, pp. 725-783, 1960.
317. HAN C.D, RAO D.A., "Studies on wire coating extrusion. I. The rheology of wire coating extrusion", Polymer Engineering & Science, vol. 18, pp. 1019-1029, 1978.
318. HAN C.D., RAO D.A., "Studies on wire coating extrusion. II. The rheology of wire coating coextrusion", Polymer Engineering & Science, vol. 20, pp. 128-139, 1980.
319. KING J.S., DURNO J.A., "The effect of die land length on the surface appearance of low melt index polyethylene extrudates", Wire and Wire Products, vol. 39, pp. 553-614, 1964.
320. KOZICKI W., CHOU C.H., TIU C., "Non-Newtonian flow in ducts of arbitrary cross-sectional shape", Chemical Engineering and Science, vol. 21, pp. 665-679, 1966.
321. LAFLEUR P.G., ARPIN B., LENIR V., "Computer aided design of wire coating dies", Advances in Polymer Technology, vol. 13, pp. 297-304, 1994.
322. LEBAAL N., PUISSANT S., SCHMIDT F.M. et al., "An optimization method with experimental validation for the design of extrusion wire coating dies for a range of different materials and operating conditions", Polymer Engineering & Science, vol. 52, pp. 2675-2687, 2012.
323. LENIR V., "Melt flow analysis in wire coating dies for dual extrudates", Wire Journal, vol. 7, pp. 59-64, 1974.
324. LEVY S., "Process and equipment for in line post extrusion forming", Plast. Mach. Equip, vol. 7, pp. 24-26, 1978.
325. MATALLAH H., TOWNSEND P, WEBSTER M.F., "Viscoelastic multi-mode simulations of wire-coating", Journal of Non-Newtonian Fluid Mechanics, vol. 90, pp. 217-241, 2000.
326. MATALLAH H., TOWNSEND P., WEBSTER M.F., "Viscoelastic computations of polymeric wire-coating flows", International Journal of Numerical Methods in Heat Fluid Flow, vol. 12, pp. 404-433, 2002.
327. MIDDLEMAN S., Fundamentals of Polymer Processing, McGraw-Hill, New York, 1977.
328. MITSOULIS E., "Finite element analysis of wire coating", Polymer Engineering & Science, vol. 26, pp. 171-186, 1986.
329. PODOLSAK A.K., TIU C., "A review of wire coating and cable sheating extrusion processes", Polymer and Plastics Technology and Engineering, vol. 27, pp. 389-427, 1988.
330. PUISSANT S., BONVIN P.Y., "Lignes d'extrusion en câblerie. Câbles, contrôle qualité, rentabilité", Techniques de l'Ingénieur, vol. AM3640, pp. 1-14, 2006.
331. RAUWENDAAL C., Polymer Extrusion, 3rd. ed., Hanser, Munich, 2001.
332. SCHLÄFLI D., "Analysis of polymer flow through coat hanger melt distributors", Intern. Polym. Proc., vol. 10, pp. 195-199, 1995.
333. TIU C., "Wire coating extrusion - an approximate solution", Polymer Engineering & Science, vol. 26, pp. 957-961, 1986.
334. VERGNES B., Modélisation de l'écoulement d'un polymère dans une filière de câblerie, PhD Thesis, Paris School of Mines, 1979.
335. VERGNES B., "Etude de l'écoulement d'un polymère fondu dans une filière de câblerie téléphonique", Matériaux et Techniques., vol. 6, pp. 187-191, 1981.
336. VERGNES B., AGASSANT J.-F., "Modélisation des écoulements dans les filières d'extrusion", Techniques de l'Ingénieur, vol. A3655, pp. 1-20, 2008.
337. WAGNER R., MITSOULIS E., "Effect of die design on the analysis of wire coating", Advances in Polymer Technology, vol. 5, pp. 305-325, 1985.
338. WILLETT J.L., SHOGREN R.L., "Processing and properties of extruded starch/ polymer foams", Polymer, vol. 43, pp. 5935-5947, 2002.