Computer-aided design and optimization of profile extrusion dies for thermoplastics and rubber: A review

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering

Volumn 225, Issue 4, 2011, Pages 280-321

  Pittman, J F T ^a  

^a SWANSEA UNIVERSITY   (United Kingdom)

Author keywords

Computer aided die design; Die flow balancing; Die flow simulation; Die optimization; Extrudate swell; Profile extrusion; Rubber; Unplasticized PVC

Indexed keywords

CHLORINE COMPOUNDS; COMPUTER AIDED DESIGN; EXTRUSION DIES; FLOW SIMULATION; POLYVINYL CHLORIDES; REINFORCED PLASTICS; RUBBER; RUBBER PRODUCTS;

COMPUTER-AIDED DIE DESIGNS; DIE FLOW BALANCING; DIE FLOW SIMULATIONS; DIE OPTIMIZATIONS; EXTRUDATE SWELL; PROFILE EXTRUSION; UNPLASTICIZED PVCS;

DIES;

EID: 84856328078     PISSN: 09544089     EISSN: None     Source Type: Journal    
DOI: 10.1177/0954408911415324     Document Type: Conference Paper

References (173)

1. Pritchard, G. PVC - world markets and prospects, Rapra market report, Smithers Rapra, SY4 4NR, UK, 2002.
2. BPF. Vinyls Group, 2011, available from www.bpf.co.uk.
3. Ettinger, H. J. Development of optimization and parameterization techniques applied to extrusion die design optimization of PVC profile dies. PhD Thesis, School of Engineering, Swansea University, 2004.
4. Szarvasy, I. Automatic CAD model based simulation of PVC extrusion and calibration. PhD Thesis, School of Engineering, Swansea University, 2005.
5. Conrad, U. The calibration process in uPVC profile extrusion. PhD Thesis, School of Engineering, Swansea University, 2003.
6. Levy, S. Extrusion die design for thermoplastic materials comparison of extrusion ease with PVC materials. Adv. Plast. Technol., 1981, 1, 24-31. (Pubitemid 12510876)
7. Levy, S. Continuous molding extrusion processes. Adv. Plast. Technol., 1981, 1, 32-34.
8. Rippl, A. P. Three dimensional simulation of rubber profile extrusion on the basis of in-line rheometry. PhD Thesis, School of Engineering, Swansea University, 2004.
9. Corbett, H. O. Extrusion die design. SPE J., 1954, June, 15-18.
10. Levy, S. The technology of plastics profile tooling. Adv. Plast. Technol., January, 1981, 8-53.
11. Summers, J. W. and Brown, R. J. Practical principles of die design - a simplified procedure, in table form, for rigid PVC. J. Vinyl Technol., 1981, 3(4), 215-218.
12. Cykana, D. Know-how: tooling. The science of profile die balancing. Plast. Technol. Online August, 2010, available from www.ptonline.com.
13. Kostic, M. M. and Reifschneider, L. G. Design of extrusion dies. Encyclopedia of chemical processing, 2006, pp. 633-649 (Taylor and Francis, New York).
14. Cykana, D. Five tips on profile die design. Plast. Technol. Online January, 2010, available from www.ptonline.com.
15. Michaeli, W. Extrusion dies for plastics and rubber, 1992 (Hanser Verlag, Munich).
16. Song, H. J., White, J. L., Min, K., Nakajima, N., and Weissert, F. C. Rheological properties, extrudate swell and die entry extrusion flow marker experiments for rubber-carbon black compounds. Adv. Polym. Technol., 1988, 8(4), 431-449.
17. Ma, C. Y., White, J. L., Weissert, F. C., Isayev, A. I., Nakajima, N., and Min, K. Flow patterns in elastomers and their carbon black compounds during extrusion throughdies. RubberChem.Technol., 1985, 58, 815-829. (Pubitemid 15560003)
18. Lee, C.-C. and Stevenson, J. F. The face-relief strategy for design of profile dies. Int. Polym. Process., 1992, 7(2), 186-189.
19. Bird, R. B., Armstrong, R. C., and Hassager, O. Dynamics of polymeric liquids, 1977 (John Wiley and Sons, New York).
20. Hurez, P., Tanguy, P. A., and Blouin, D. A finite element based design of profile extrusion dies. In Proceedings of ANTEC 1991, Montreal, Quebec, Canada, 5-9 May 1991, pp. 1028-1030.
21. Hurez, P., Tanguy, P. A., and Blouin, D. Numerical simulation of profile extrusion dies without flow separation. Polym. Eng. Sci., 1993, 33(15), 971-979.
22. Gupta, M. Effect of elongational viscosity on axisymmetric entrance flow of polymers. Polym. Eng. Sci., 2000, 40(1), 23-36.
23. Ettinger, H., Pittman, J. F. T., and Sienz, J. Converging flow on-line rheometry for an engineering extensional viscosity of Upvc, PPS23, Salvador, Brazil, 27-31 May, 2007.
24. Ettinger, H., Pittman, J. F. T., and Sienz, J. Converging flow inline rheometry for engineering extensional viscosity of uPVC. Plast. Rubber Compos., 2009, 38(1), 27-32.
25. Rippl, A., Pittman, J. F. T., Sienz, J., and Smythe, A. Inverse material parameter determination for extruded rubber employing and in-line rheometer. In Proceedings of the Fifth ASMOUK/ISSMOConference on Engineering design optimization (Eds O. Querin, J. Sienz, V. V. Toropov, and P.D.Gosling), Stratford upon Avon, UK, 12-13 July 2004.
26. Rippl, A., Pittman, J. F. T., and Sienz, J. On-line rheometry of an EPDM rubber using parameter fitting. In PPS21, 21st Annual Meeting of the Polymer Processing Society, Leipzig, Germany, June 19-23, Leipzig, Germany, 2005.
27. Rippll, A., Pittman, J., Polynkin, A., and Sienz, J. Simultaneous determination of shear and extensional viscosities and wall slip by on-line rheometry with parameter fitting: an application to EPDM rubber. Rheol. Acta, 2007, 46, 847-880.
28. Song, W. N. and Xia, Z. M. A phenomenological viscosity model for polymeric flow. J. Non-Newtonian Fluid Mech., 1994, 53, 151-163. (Pubitemid 282819)
29. Mitsoulis, E., Vlachopoulos, J., and Mirza, F. A. A numerical study of the effects of normal stresses and elongational viscosity on entry vortex growth and extrudate swell. Polym. Eng. Sci., 1985, 25(11), 677-689. (Pubitemid 15578844)
30. Debbaut, B. and Crochet, M. J. Extensional effects in complex flows. J. Non-Newtonian Fluid Mech., 1988, 30, 169-184.
31. Schunk, P. R. and Scriven, L. E. Constitutive equation for modeling mixed extension and shear in polymer solution processing. J. Rheol., 1990, 34(7), 1085-1119.
32. Vlcek, J., Perdikoulias, J., Vlachopoulos, J., and Tzoganakis, C. Effect of elongational viscosity on polymer melt distribution in extrusion dies. In Proceedings of ANTEC 1994, San Francisco, CA, 1-4 May 1994, pp. 306-309.
33. Gupta, M. Effect of elongational viscosity on die design for plastic extrusion. In Proceedings of ANTEC 1999, New York City, USA, 2-6 May, 1999, pp. 595.
34. Zatloukal, M. A simple phenomenological non- Newtonian fluid model. J. Non-Newtonian Fluid Mech., 2010, 165, 592-595.
35. Sarkar, D. and Gupta, M. An investigation of the effect of elongational viscosity on entrance flow. In CAE and related innovations for polymer processing (Eds L.-S. Turng, H. P. Wang, K. Ramani, and A. Bernard), 2000, MD-Vol. 90 (ASME, Houston, Texas).
36. Owens, R. G. and Phillips, T. N. Computational rheology, 2002 (Imperial College Press, London).
37. Denn, M. M. Extrusion instabilities and wall slip. Annu. Rev. Fluid Mech., 2001, 33, 265-287.
38. Denn, M. M. Polymer melt processing: foundations in fluid mechanics and heat transfer, 2008 (Cambridge University Press, New York).
39. Rippl, A., Pittman, J. F. T., and Sienz, J. Threedimensional simulation of rubber profile extrusion with integration of rheological data. In (Ed. V. Brucato), Proceeding of Sixth SAFORM, Salerno, Italy, 28-30 April 2003 pp. 303-306.
40. Rippl, A., Pittman, J. F. T., and Sienz, J. Threedimensional simulation of rubber extrusion using finite element analysis. In (Ed. J. Bonet), Proceedings of the Tenth ACME, Swansea, UK, 14- 17 April 2002, pp. 85-88.
41. Szarvasy, I. and Pittman, J. F. T. Pressure drop and die surface changes in unplasticised PVC extrusion. Polym. Eng. Sci., 2003, 43(8), 1488-1499.
42. Szarvasy, I. and Pittman, J. F. T. Pressure drop and die surface changes in uPVC extrusion. In PPS18 (Ed. J. A. Covas), Guimaraes, Portugal, 12-14 June 2002.
43. Ettinger, H., Haase, R., Pittman, J. F. T., and Sienz, J. Investigation of wall slip and shear viscosity of uPVC by on-line rheometry with parameter fitting. In PPS21(Ed. H.-J. Radusch), Leipzig, Germany, 19-23 June, 2005.
44. Hagstrom, B. Measurement of wall slip for a PVC compound and its application in CFD simulations of a melt distributor in a pipe die. In PPS18 (Ed. Covas, J. A.), Paper 239, Guimaraes, Portugal, 16-20 June, 2002.
45. Mourniac, P. H., Agassant, J. F., and Vergnes, B. Determination of wall slip velocity in the flow of a SBR compound. Rheol. Acta, 1992, 31, 565-574.
46. Müllner, H. W. Experimental and numerical investigation of the die swell phenomenon of rubber blends. In Proceedings of the 6th International PhD Symposium on Civil engineering, Zurich, Switzerland, 23-26 August 2006.
47. Müllner, H. W., Eberhardsteiner, J., and Mackenzie-Helnwein, P. Constitutive characterization of rubber blends by means of capillary- Viscometry. Polym. Test., 2009, 28, 13-23.
48. Ferras, L. L., Nobrega, J. M., and Carneiro, O. S. Profile extrusion die design: the effect of wall slip. In PPS23, Salvador, Brazil, 27-31 May, 2007.
49. Tubagus, N. H., Shiohara, M., Shimada, Y., and Ichinohe, S. Analysis of wall slip effects on flow behaviour in extrusion process. In PPS18, Paper 176, Guimaraes, Portugal, 16-20 June, 2002.
50. Achilleos, E. and Georgiou, G. C. On numerical simulations of polymer extrusion instabilities. Appl. Rheol., 2002, 12, 88-104.
51. Glomsaker, T., Hinrichsen, E. L., Irgens, F., and Thorsteinsen, P. Numerical simulation of extrusion of S-PVC formulations in a capillary rheometer. Rheol. Acta, 2000, 39, 80-96.
52. Malkin, A. Y. Flow instability in polymer solutions and melts. Polym. Sci. Ser. C, 2006, 48(1), 21-37. (Pubitemid 44393338)
53. Agassant, J.-F. and Covas, J. A. An overview of polymer processing modelling. In Advances in material forming (Eds F. Chinesta, E. Cueto), 2007, pp. 37-59 (Springer, New York).
54. Pittman, J. F. T. Finite elements for field problems. In Fundamentals of computer modeling for polymer processing (Ed. C. L. Tucker III), 1989, pp. 237-325 (Hanser Verlag, Munich).
55. Legat, V. and Marchal, J.-M. Die design: an implicit formulation for the inverse problem. Int. J. Numer. Methods Fluids, 1993, 16, 29-42.
56. Legat, V. and Marchal, J.-M. Prediction of threedimensional general shape extrudates by an implicit iterative scheme. Int. J. Numer. Methods Fluids, 1992, 14, 609-625.
57. Tanner, R. I. A theory of die-Swell. J. Polym. Sci. Part A-2: Polym. Phys., 1970, 8, 2067-2078.
58. Huang, D. C. and White, J. L. Extrudate swell from slit and capillary dies: an experimental and theoretical study. Polym. Eng. Sci., 1979, 19(9), 609-616.
59. Huilgol, R. R. Continuum mechanics of viscoelastic fluids, 1975 (Hindustan Publishing Corporation, Delhi and New York).
60. White, J. L. and Huang, D. Extrudate swell and extrusion pressure loss of polymer melts flowing through rectangular and trapezoidal dies. Polym. Eng. Sci., 1981, 21(16), 1101-1107. (Pubitemid 13461707)
61. Graessley, W. W., Glasscock, S. D., and Crawley, R. L. Die swell in molten polymers. Trans. Soc. Rheol., 1970, 14(4), 519-544.
62. Pearson, J. R. A. and Trottnow, R. On die swell: some theoretical results. J. Non-Newtonian Fluid Mech., 1978, 4, 195-215. (Pubitemid 9390628)
63. Covas, J. A. and Carneiro, O. S. Elasticity of poly(- vinyl chloride) melts. Polymer, 1992, 33(23), 4977-4982.
64. Laun, H. M. Prediction of elastic strains of polymer melts in shear and elongation. J. Rheol., 1986, 30(3), 459-502.
65. Rabinovitch, E. B., Summers, J. W., and Booth, P. C. Die design for rigid PVC - the effect of die land length on extrudate swell. In Proceedings of ANTEC 1991, Montreal, Quebec, Canada, 5-9 May 1991, pp. 1226-1229. (Pubitemid 21686475)
66. Huang, D. and White, J. L. Experimental and theoretical investigation of extrudate swell of polymer melts from small (length)/(cross-section) ratio slit and capillary dies. Polym. Eng. Sci., 1980, 20(3), 182-189. (Pubitemid 10454924)
67. Rabinovitch, E. B., Summers, J. W., and Booth, P. C. Die design for rigid PVC - the effect of die land length on extrudate swell. J. Vinyl Technol., 1992, 14(1), 20-23.
68. Mitsoulis, E. and Park, H. J. Effect of die length in extrusion flows of polymer melts. In Proceedings of Society of Plastics Engineers Annual Technical Conference, ANTEC, Detroit, Michigan, USA, May, pp. 421-425.
69. Liang, J. Z. A new short die swell equation for polymer extrusion. Plast. Rubber Compos. Process. Appl., 1995, 23(2), 93-95.
70. Jeong, J.-H. and Leonov, A. I. Modeling contraction flows and swell of polymer melts extruded from dies of various lengths. Polym. Eng. Sci., 2008, 48(12), 2340-2353.
71. Lee, W.-S. and Ho, H.-Y. Experimental study on extrudate swell and die geometry of profile extrusion. Polym. Eng. Sci., 2000, 40(5), 1085-1094.
72. Huneault, M. A., Lafleur, P. G., and Carreau, P. J. Extrudate swell and drawdown effects on extruded profile dimensions and shape. Polym. Eng. Sci., 1990, 30(23), 1544-1550.
73. Müllner, H. W., Ernst, G., and Eberhardsteiner, J. Back-calculation of the die swell phenomenon of rubber compounds by means of torsional rheometry. J. Appl. Polym. Sci., 2008, 110, 76-82.
74. Han, C. D. and Charles, M. A method for the determination of polymer melt die swell. Trans. Soc. Rheol., 1970, 14(2), 213-218.
75. Milthorpe, J. F. and Tanner, R. I. On the extrusion of visco-elastic fluids subject to viscous heating. Int. J. Numer. Methods Eng., 1987, 24, 263-270. (Pubitemid 17510567)
76. Yang, B. and Lee, L. J. Effect of die temperature on the flow of polymer melts. Part II: Extrudate swell. Polym. Eng. Sci., 1987, 27(14), 1088-1094. (Pubitemid 17634036)
77. Ben-Sabar, E. and Caswell, B. Heat transfer effects in die swell. J. Rheol., 1981, 25(5), 537-548. (Pubitemid 12568897)
78. Huyn, B. P. Some finite element studies of extrusion. J. Non-Newtonian Fluid Mech., 1983, 13, 1-20.
79. Vlcek, J. and Vlachopoulos, J. Effect of die wall cooling or heating on extrudate swell. Polym. Eng. Sci., 1989, 29(10), 685-689.
80. Phouc, H. B. and Tanner, R. I. Thermally induced extrudate swell. J. Fluid Mech., 1980, 98(2), 253-271.
81. Huneault, M. A., Carreau, P. J., Lafleur, P. G., and Gupta, V. P. Effect of selected additives on the extrudate swell and rheological properties of rigid PVC. In Proceedings of ANTEC 1992, Detroit, Michigan, 4-7 May 1992, pp. 1063-1066.
82. Carreau, P. J., Lafleur, P. G., Huneault, M. A., and Gupta, V. P. Extrudate swell of rigid PVC compounds Proc. 11th International Congress on Rheology, (pub. Elsevier, Amsterdam), Brussels, Belgium, 1992, pp. 330-332.
83. Glomsaker, T., Hinrichsen, E. L., Larsen, A., and Thorsteinsen, P. Rheological properties of suspension poly(vinyl chloride) formulations in extrusion dies. Plast. Rubber Compos., 1999, 28(4), 145-151. (Pubitemid 30499110)
84. Hinrichsen, E. L. and Thorstiensen, P. Effects of processing and degree of fusion on the rheology of PVC. J. Vinyl Addit. Technol., 1996, 2(1), 18-29. (Pubitemid 126429806)
85. Huneault, M. A., Carreau, P. J., and Lafleur, P. G. Extrudate swelling and viscoelasticity of rigid PVC compounds. J. Vinyl Technol., 1992, 14(4), 175-181.
86. Müllner, H. W., Eberhardsteiner, J., and Fidi, W. Rheological characterization of the die swell phenomenon of rubber compounds. Polym. Test., 2007, 26, 1041-1048. (Pubitemid 350103721)
87. Griffith, R. M. and Tsai, J. T. Shape changes during drawing of non-Circular extruded profiles. Polym. Eng. Sci., 1980, 20(18), 1181-1187. (Pubitemid 11472156)
88. Carneiro, O. S., Viana, J. C., and Nobrega, J. M. Study on processing-microstructure relationships of extruded profiles. Plast. Rubber Compos., 2006, 35(4), 173-180. (Pubitemid 44422963)
89. Szarvasy, I., Sienz, J., Pittman, J. F. T., and Hinton, E. Computer aided optimisation of profile extrusion dies: definition and assessment of the objective function. Int. Polym. Proc., 2000, 15, 28-39.
90. Conrad, U. and Pittman, J. F. T. PVC profile calibration: comprehensive trials relating process outcomes and operating conditions. In Proceedings of the 3 rd ESAFORM (Ed. H.-G. Fritz), Vol. IV, Stuttgart University, Germany, 11-14 April 2000, pp. 23-26.
91. Stevenson, J. F., Lee, L. J., and Griffith, M. G. Multidimensional control of profile extrusion. Polym. Eng. Sci., 1986, 26(3), 233-238.
92. Karagiannis, A., Hrymak, A. N., and Vlachopoulos, J. Three-dimensional non-isothermal extrusion flows. Rheol. Acta, 1989, 28, 121-133.
93. Perdikoulias, J. Computer flow analysis helps develop new profile dies faster. Plast. Technol., August, 2003, 59-61, available from www.plasticstechnology.com.
94. Koziey, B. L., Vlachopoulos, J., Vlcek, J., and Svabic, J. Profile die design by pressure balancing and cross flow minimization. In Proceedings of ANTEC 1996, Indianapolis, Indiana, 5-9 May 1996, pp. 247-252.
95. Svabic, J., Placek, L., and Saha, P. Profile die design based on flow balancing. Int. Polym. Proc., 1999, 14(3), 247-253.
96. Svabic, J. and Perdikoulias, J. Profile die design based on flow balancing: simulation and experiment. In Proceedings of Vinyltech, 12-14 October, 1999, Mississauga, Canada, pp. 111-116.
97. Miller, C. Predicting non-Newtonian flow behaviour in ducts of unusual cross section. Ind. Eng. Chem. Fundam., 1972, 11(4), 524-528.
98. Tran-Cong, T. and Phan-Thien, N. Die design by a boundary element method. J. Non-Newtonian Fluid Mech., 1988, 30(1), 37-46.
99. Woei-Shyong, L. and Hsueh-Yu, H. Experimental study on extrudate swell and die geometry of profile extrusion. Polym. Eng. Sci., 2000, 40(5), 1085-1094.
100. Ellwood, K. R. J., Papanastasiou, T. C., and Wilkes, J. O. Three dimensional streamlined finite elements: design of extrusion dies. Int. J. Numer. Methods Fluids, 1992, 14, 13-24.
101. Rakos, R., Kiana, A., and Sebastian, D. H. Computer design aids for non-axisymmetric profile dies. In Proceedings of ANTEC 1989, 2-6 May, New York City, USA, 1989, pp. 66-68.
102. Gupta, M., Jaluria, Y., Sernas, V., and Esseghir, M. Numerical and experimental investigation of threedimensional flow in extrusion dies. Polym. Eng. Sci., 1993, 33(7), 393-399.
103. Nobrega, J. M., Carneiro, O. S., Pinho, F. T., and Oliveira, O. S. On the automatic die design for the extrusion of thermoplastic profiles. In Meeting of the Polymer Processing Society, PPS16, Shanghai, China, 18-23 June 2000.
104. Nobrega, J. M., Carneiro, O. S., Pinho, F. T., and Oliveira, P. J. Flow balancing of profile extrusion dies. In Proceedings of ANTEC 2001, Dallas, Texas, 6-10 May 2001, Paper 29, pp. 31-35.
105. Carneiro, O. S., Nobrega, J. M., Pinho, F. T., and Oliveira, P. J. Computer aided rheological design of extrusion dies for profiles. J. Mater. Process. Technol., 2001, 114, 75-86. (Pubitemid 32518468)
106. Gifford, W. A. Compensating for die swell in the design of profile dies. Polym. Eng. Sci., 2003, 43(10), 1657-1665.
107. Yilmaz, O. and Kirkkopru, K. A method to obtain balanced flow in profile extrusion dies. In Proceedings of ANTEC 2009, West Chicago, Illinois, 22-24 June 2009, pp. 1566-1571.
108. Hurez, P., Tanguy, P. A., and Blouin, D. A new design procedure for profile extrusion dies. Polym. Eng. Sci., 1996, 36(5), 626-635.
109. Michaeli, W., Behr, M., Elgeti, S., Probst, M., Nicolai, M., Fink, B., and Windeck, C. Automatically optimizing profile dies. Kunstst. Int., 2009, 7, 28-30.
110. Dai, Y., Zheng, H., Zhou, C., and Yu, W. Quick profile die balancing of automotive rubber seal extrusion by CAE Technology. J. Macromol. Sci. Part A Pure Appl. Chem., 2008, 45(12), 1028-1036.
111. Nobrega, J. M., Carneiro, O. S., Pinho, F. T., and Oliveira, P. J. Optimisation of the flow distribution in profile extrusion dies. In Proceedings of ANTEC 2002, San Francisco, California, 5-9 May 2002, Paper 111, pp. 122-126.
112. Nobrega, J. M., Carneiro, O. S., Oliveira, O. S., and Pinho, F. T. Flow balance optimisation of profile dies. In PPS18, Guimaraes, Portugal, 16-20 June, 2002.
113. Vergnes, B., Vincent, M., Demay, Y., Coupez, T., Billon, N., and Agassant, J.-F. Present challenges in the numerical modelling of polymer forming processes. Can. J. Chem. Eng., 2002, 80, 1143-1152. (Pubitemid 36723436)
114. Mu, Y. and Guoqun, Z. Modeling and simulation of the complex flows in the extrusion process of plastic profile with metal insert. In Proceedings of ANTEC 2007, Cincinnati, Ohio, 6-11 May 2007, pp. 352-358. (Pubitemid 47458305)
115. Zolfaghari, A., Behravesh, A. H., Shakouri, E., and Soury, E. An innovative method of die design and evaluation of flow balance for thermoplastics extrusion profiles. Polym. Eng. Sci., 2009, 49, 1793-1799.
116. Zacharias, F. and Schrader, S. Balancing of a profile die for glass run seal of a car using three-dimensional flow simulation. In Proceedings of ANTEC 2007, Cincinnati, Ohio, 6-11 May 2007, pp. 2403-2406.
117. Jongman, K., Youn, J. R., and Hyun, J. C. Three dimensional flow analysis within a profile extrusion die by using control volume finite-element method. Korea-Aust. Rheol. J., 2001, 13(2), 97-106.
118. Yue, M. and Guoqun, Z. Modeling and simulation of the complex flows in the extrusion process of plastic profile with metal insert. In Proceedings of ANTEC 2007, Cincinnati, Ohio, 6-11 May 2007, pp. 352-358. (Pubitemid 47458305)
119. Rubin, Y., Marchal, T. h., and Rothemeyer, F. Die design improvements through numerical simulation for the extrusion of EPDM compounds. Kautsch. Gummi Kunstst., 1998, 51(9), 602-608. (Pubitemid 128567596)
120. Reifschneider, L. G., Kostic, M. M., and Vaddiraju, S. R. Computational design of a U-profile and calibrator. In Proceedings of ANTEC 2004, Navy Pier, Chicago, Illinois, 16-20 May 2004, pp. 246-250.
121. Vaddiraju, S. R., Kostic, M., Reifschneider, L., Pla- Dalmau, A., and Bross, A. Extrusion simulation and experimental validation to optimize precision die design. In Proceedings of ANTEC 2004, Navy Pier, Chicago, Illinois, 16-20 May 2004, pp. 76-80.
122. Dai, Y. K., Zhou, C. X., and Yu, W. Inverse designing simulation of extrusion die of auto rubber seal and verifications. Plast. Rubber Compos., 2007, 36(4), 141-148. (Pubitemid 47610590)
123. Müllner, H. W., Wieczorek, A., and Eberhardsteiner, J. Numerical prediction of the dimensioning of tools for the extrusion process of rubber profiles. In Proceedings of ESAFORM 2007, Zaragoza, Spain, 18-20 April 2007, pp. 986-994.
124. Müllner, H. W., Wieczorek, A., Fidi, W., and Eberhardsteiner, J. Advances in numerical prediction of extrusion tools used for fabrication of rubber profiles. Proc. Appl. Math. Mech., 2008, 8, 10633-10634.
125. Andrejewski, D. A. Polyflow: a treatise on inverse die/mandrel design for high consistency silicone elastomer. In Proceedings of ANTEC 1997, Toronto, Canada, 27 April to 2 May 1997, pp. 308-314.
126. Rubin, Y., Marchal, T., and Clemeur, N. Numerical simulation of extrusion and coextrusion: shape and interface prediction and die design. In PPS15, 'SHertogenbosch, Netherlands, 1999.
127. Coupez, Y., Isaac, A., and Nouatin, H. Optimisation in forming using the simplex method and preliminary results on an explicit 3D viscoelastic solution. In Proceedings of 2nd ESAFORM, Guimaraes, Portugal, 13-16 April 1999, pp. 477-480.
128. Tran-Cong, T. and Phan-Tien, N. Three-dimensional study of extrusion processes by boundary element method. II: Extrusion of a viscoelastic fluid. Rheol. Acta, 1988, 27, 639-648.
129. Mu, Y. and Zhao, G. Numerical study of nonisothermal polymer extrusion flow with a differential viscoelastic model. Polym. Eng. Sci., 2008, 48, 316-328.
130. Mu, Y., Zhao, G., and Zhang, C. Numerical investigation of viscoelastic flow and swell behaviours of polymer melts in the hollow profile extrusion process. Adv. Mater. Res., 2010, 97-101, 209-213.
131. Mu, Y., Zhao, G., Zhang, C., Chen, A., and Li, H. Three-dimensional simulation of planar contraction viscoelastic flow by penalty finite element method. Int. J. Numer. Methods Fluids, 2010, 63, 811-827.
132. Marin, J. M. R. and Rasmussen, H. K. Lagrangian finite element method for 3D time-dependent nonisothermal flow of K-BKZ fluids. J. Non-Newtonian Fluid Mech., 2009, 162, 45-53.
133. Tome, M. F., Paulo, G. S., Pinho, F. T., and Alves, M. A. Numerical solution of the PTT constitutive equation for unsteady three-dimensional free surface flows. J. Non-Newtonian Fluid Mech., 2010, 165, 247-262.
134. Altair HyperXtrude, 2011, available from www.tx.altair.com.
135. ANSYSPolyflow, 2011, available from www.ansys.com.
136. Compuplast Virtual Extrusion Laboratory, 2011, available from www.compuplast.com.
137. Chouchaoui, B. The virtual die module of the Virtual Extrusion Laboratory. Rubber World, 2007, October, 56-62.
138. Maier, C. Screwing down extrusion. Br. Plast. Rubber, 2007, February.
139. Schmitt, L. A., Bennet, J. A., and Botkin, M. E. (Eds) The optimum shape: automated structural design, 1986 (Plenum Press, New York).
140. Sienz, J., Marchal, J.-M. and Pittman, J. F. T. Profile extrusion die design using optimisation techniques and an expert system. In Proceedings of 3 rd ESAFORM (Ed. H.-G. Fritz), Stuttgart, Germany, 11-14 April 2000, pp. 23-26.
141. Marchal, J.-M. and Goublomme, A. Parametric optimization of extrusion dies through numerical simulation. In Proceedings of 3 rd ESAFORM, Stuttgart, Germany, 11-14 April 2000, pp. III 3-6.
142. Sienz, J., Bulman, S. D., and Pittman, J. F. T. Optimization strategies for extrusion die design. In Proceedings of 4th ESAFORM, Liege, Belgium, 23-25 April 2001, pp. 275-278.
143. Sienz, J., daSilva, C. E. K., Hinton, E., and Szarvasy, I. Optimisation of PVC window profile dies. In Computational mechanics new trends and applications (Eds E. Oñate, S. R. Idelsohn), 1998 (CIMNE, Barcelona, Spain).
144. Bartholomew-Biggs, M. C. Nonlinear optimization with engineering applications, 2008 (Springer, New York).
145. Sienz, J., Goublomme, A., and Luege, M. Sensitivity analysis for the design of profile extrusion dies. Comput. Struct., 2010, 88, 610-624.
146. Sienz, J., Goublomme, A., and Pittman, J. F. T. Residual formulation based sensitivity analysis for polymer processing. In Proceedings of Sixth world congress on structural and multidisciplinary optimization (Ed. J. Herskovits), Rio-de-Janeiro, Brazil, 30 May to 3 June, 2005.
147. Nobrega, J. M., Carneiro, O. S., Oliveira, P. J., and Pinho, F. T. Flow balancing in extrusion dies for thermoplastic profiles. Part 1. Automatic design. Int. Polym. Proc., 2003, 18(3), 298-306.
148. Carneiro, O. S., Nobrega, J. M., Pinho, F. T., and Oliveira, P. J. Automatic balancing of profile extrusion dies: experimental assessment. In Proceedings of ANTEC 2004, Navy Pier, Chicago, Illinois, 16-20 May 2004, pp. 91-95.
149. Nobrega, J. M., Carneiro, O. S., and Pinho, F. T. Flow balancing in extrusion dies for thermoplastic profiles. Part III: Experimental assessment. Int. Polym. Process., 2004, 19(3), 225-235.
150. Sienz, J., Bates, S. J., and Pittman, J. F. T. Flow restrictor design for extrusion slit dies for a range of materials: simulation and comparison of optimization techniques. Finite Elem. Anal. Des., 2006, 42, 430-453. (Pubitemid 43098694)
151. Toropov, V. V., van Keulen, F., Markine, V. L., and de Boer, H. Refinements in the multi-point approximation method to reduce the effects of noisy responses. In Proceedings of 6th AIAA/NASA/ISSMO Symposium on Multidisciplinary analysis and optimisation, Bellevue WA, 4-6 September 1996, pp. 941-951 (The American Institute of Aeronautics and Astronautics, Reston, Virginia).
152. Toropov, V. V. and Alvarez, L. F. Approximate model building for design optimization using genetic programming methodology. In Proceedings of 7th AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary analysis and optimization, St Louis, Missouri, 2-4 September 1998, pp. 490-498 (The American Institute of Aeronautics and Astronautics, Reston, Virginia).
153. Sienz, J., Szarvasy, I., Pittman, J. F. T., Hinton, E., and Sander, R. Computer aided simulation and design of profile extrusion dies. In Polymer Processing Society Regional Europe/Africa Meeting, Gothenburg, Sweden, 19-21 August 1997.
154. Sienz, J., Da Silva, C. E. K., Hinton, E., Pittman, J. F. T., and Marchal, J.-M. Expert-system driven optimisation of extrusion dies. In Proceedings of 1st ASMO UK/ISSMO Conference on Engineering design optimization, Ilkley, West Yorkshire, UK, 8-9 July 1999, pp. 337-344 (ASMO, UK).
155. Ettinger, H. J., Sienz, J., and Pittman, J. F. T. Geometrical parameterization of uPVC extrusion dies for three dimensional finite element analysis. In Proceedings of the 10th ACME (Ed. J. Bonet), Swansea, UK, 14-17 April 2002, pp. 81-84 (ACME, UK).
156. Ettinger, H. J., Sienz, J., Pittman, J. F. T., and Szarvasy, I. Parameterization techniques for twoand three-dimensional automated optimisation of PVC extrusion dies. PPS18, Paper 285, Guimaraes, Portugal, 2002.
157. Ettinger, H. J., Sienz, J., Pittman, J. F. T., and Szarvasy, I. Automated optimization of extrusion die design for PVC profiles. In Proceedings of 6th ESAFORM (Ed. V. Brucato), Salerno, Italy, 28-30 April 2003, pp. 127-130.
158. Ettinger, H. J., Sienz, J., Pittman, J. F. T., and Polynkin, A. Parameterization and optimization strategies for the automated design of uPVC extrusion dies. Struct. Multidiscip. Optim., 2004, 28(2, 3), 180-194.
159. Sienz, J., Pittman, J. F. T., Ettinger, H. J., and Bates, S. J. Optimization of thermoplastics extrusion die design: parameterization, algorithms and strategies. In Proceedings of the 5th ESAFORM (Ed. M. E. A. Pietrzyk), Crakow, Poland, 14-17 April 2002, pp. 35-38.
160. Ettinger, H. J., Sienz, J., and Pittman, J. F. T. Optimization strategies for the optimization of PVC extrusion dies. In Proceedings of the 5th World Congress of Structural and Multidisciplinary Optimization, Lido di Jesolo, Italy, 19-23 May 2003, pp. 265-266.
161. 2011, available from www.vrand.com.
162. Szarvasy, I. PVC extrusion die design: parallel finite element based optimisation of an upstand bead Profile die. In Proceedings of the 3 rd ESAFORM, Stuttgart, Germany, 11-14 April 2000, Paper III-15.
163. Reddy, M. P. and Schaub, E. G. Design and optimization of three dimensional extrusion dies using adaptive finite element method. In Proceedings of ANTEC 1999, Kaneohe, Hawaii, September 1999, pp. 63-67.
164. Carneiro, O. S. and Nobrega, J. M. Recent developments in automatic die design for profile extrusion. Plast. Rubber Compos., 2004, 33(9-10), 400-408. (Pubitemid 40819732)
165. Carneiro, O. S., Nobrega, J. M., Oliveira, P. J., and Pinho, F. T. Flow balancing in extrusion dies for thermoplastics profiles, Part II. Influence of the design strategy. Int. Polym. Proc., 2003, 18(3), 307-312.
166. Norbrega, J. M. and Carneiro, O. S. Strategies to balance the flow in profile extrusion dies. In Proceedings of ANTEC 2006, Charlotte, North Carolina, 7-11 May 2006, pp. 867-871. (Pubitemid 43991457)
167. Nobrega, J. M., Carneiro, O. S., Oliveira, P. J., and Pinho, F. T. Flow balancing in extrusion dies for thermoplastic profiles: non-isothermal effects. PPS17, Montreal, Canada, 2002.
168. Ettinger, H. J., Sienz, J., Pittman, J. F. T., and Polynkin, A. Comparison of automatic with manual die design procedures for profile dies with respect to efficiency and quality. PPS23, Salvador, Brazil, 2007.
169. Bates, S. J., Sienz, J., and Pittman, J. F. T. Robust design optimization of extrusion slit die design using several multi-objective optimization models. In Proceedings of 5th World Congress of Structural and Multidisciplinary Optimization, Lido di Jesolo, Italy, 19-23 May 2003, pp. 265-268.
170. Bates, S. J., Sienz, J., Pittman, J. F. T., and Langley, D. S. Application of robust design optimization to extrusion slit die design. In Proceedings of the 3 rd International Conference on Engineering computational technology (Eds B. H. V. Topping and Z. Bittnar), Stirling, Scotland, 2002, Paper 62.
171. Carneiro, O. S., Nobrega, J. M., Pinho, F. T., and Oliveira, P. J. Sensitivity of flow distribution in extrusion dies: influence of the design strategy. PPS18, Paper 356, Guimaraes, Portugal, 2002.
172. Nobrega, J. M., Carneiro, O. S., Oliveira, P. J., and Pinho, F. T. Sensitivity of flow distribution and flow patterns in profile extrusion dies. In Proceedings of ANTEC 2003, Nashville, Tennessee, 4-8 May 2003, pp. 310-314.
173. Nobrega, J. M., Pereira, S. P., and Carneiro, O. S. Profile extrusion dies: the effect of machining inaccuracies on flow balance and its dependence on the design strategy used. In Proceedings of the International Conference on Novel trends in rheology III, Zlin, Czech Republic, 28-29 July 2009, pp. 270-276.