Chatter identification in end milling process based on EEMD and nonlinear dimensionless indicators

International Journal of Machine Tools and Manufacture

Volumn 92, Issue , 2015, Pages 52-59

  Cao, Hongrui ^a   Zhou, Kai ^a   Chen, Xuefeng ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

C0 complexity Power spectral entropy; Chatter identification; EEMD; End milling

Indexed keywords

COMB FILTERS; CONDITION MONITORING; CUTTING; ENTROPY; FREQUENCY DOMAIN ANALYSIS; MILLING (MACHINING); NONLINEAR ANALYSIS; SIGNAL PROCESSING; SPECTRUM ANALYSIS; STOCHASTIC SYSTEMS; TIME DOMAIN ANALYSIS;

EEMD; END MILLING; ENSEMBLE EMPIRICAL MODE DECOMPOSITIONS (EEMD); INTRINSIC MODE FUNCTIONS; MACHINING CONDITIONS; NON-STATIONARY PROPERTIES; POWER SPECTRAL ENTROPY; ROTATION FREQUENCIES;

VIBRATION ANALYSIS;

EID: 84924671252     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2015.03.002     Document Type: Article

References (54)

1. G. Quintana, and J. Ciurana Chatter in machining processes: a review Int. J. Mach. Tools Manuf. 51 5 2011 363 376
2. M. Siddhpura, and R. Paurobally A review of chatter vibration research in turning Int. J. Mach. Tools Manuf. 61 2012 27 47
3. S.Y. Liang, R.L. Hecker, and R.G. Landers Machining Process Monitoring and Control: The State-of-the-Art J. Manuf. Sci. Eng. 126 2 2014 297 310
4. R. Teti, K. Jemielniak, G. O'Donnell, and D. Dornfeld Advanced monitoring of machining operations CIRP Ann.-Manuf. Technol. 59 2 2010 717 739
5. M. Lamraoui, M. Thomas, and M. El Badaoui Cyclostationarity approach for monitoring chatter and tool wear in high speed milling Mech. Syst. Signal Process. 44 1-2 2014 177 198
6. Y. Shao, X. Deng, Y. Yuan, C.K. Mechefske, and Z. Chen Characteristic recognition of chatter mark vibration in a rolling mill based on the non-dimensional parameters of the vibration signal J. Mech. Sci. Technol. 28 6 2014 2075 2080
7. D. Pérez-Canales, L. Vela-Martínez, J. Carlos Jáuregui-Correa, and J. Alvarez-Ramirez Analysis of the entropy randomness index for machining chatter detection Int. J. Mach. Tools Manuf. 62 2012 39 45
8. M. Lamraoui, M. Thomas, M. El Badaoui, and F. Girardin Indicators for monitoring chatter in milling based on instantaneous angular speeds Mech. Syst. Signal Process. 44 1-2 2014 72 85
9. P. Huang, J. Li, J. Sun, and J. Zhou Vibration analysis in milling titanium alloy based on signal processing of cutting force Int. J. Adv. Manuf. Technol. 64 5-8 2012 613 621
10. S. Tangjitsitcharoen, T. Saksri, and S. Ratanakuakangwan Advance in chatter detection in ball end milling process by utilizing wavelet transform J. Intell. Manuf. 2013 1 15
11. K.M. Hynynen, J. Ratava, T. Lindh, M. Rikkonen, V. Ryynänen, M. Lohtander, and J. Varis Chatter detection in turning processes using coherence of acceleration and audio signals J. Manuf. Sci. Eng. 136 4 2014 044503
12. T. Thaler, P. Potočnik, I. Bric, and E. Govekar Chatter detection in band sawing based on discriminant analysis of sound features Appl. Acoust. 77 2014 114 121
13. H. Liu, Q. Chen, B. Li, X. Mao, K. Mao, and F. Peng On-line chatter detection using servo motor current signal in turning Sci. China Technol. Sci. 54 12 2011 3119 3129
14. Y. Zhigang, L. Hongqi, L. Bin, L. Xiaolong, Recognition of chatter in boring operations using spindle motor current, in: Transportation, Mechanical, and Electrical Engineering (TMEE), 2011 International Conference on IEEE, 2011, pp. 2158-2161.
15. I.N. Tansel, M. Li, M. Demetgul, K. Bickraj, B. Kaya, and B. Ozcelik Detecting chatter and estimating wear from the torque of end milling signals by using Index Based Reasoner (IBR) Int. J. Adv. Manuf. Technol. 58 1-4 2010 109 118
16. E. Kuljanic, M. Sortino, and G. Totis Multisensor approaches for chatter detection in milling J. Sound Vib. 312 4-5 2008 672 693
17. D.-H. Kim, J.-Y. Song, S.-K. Cha, and H. Son The development of embedded device to detect chatter vibration in machine tools and CNC-based autonomous compensation J. Mech. Sci. Technol. 25 10 2011 2623 2630
18. R. Du, M. Elbestawi, and B. Ullagaddi Chatter detection in milling based on the probability distribution of cutting force signal Mech. Syst. Signal Process. 6 4 1992 345 362
19. G. Jia, B. Wu, Y. Hu, F. Xie, and A. Liu A synthetic criterion for early recognition of cutting chatter Sci. China Technol. Sci. 56 11 2013 2870 2876
20. M. Lamraoui, M. Barakat, M. Thomas, and M. El Badaoui Chatter detection in milling machines by neural networks classification and feature selection J. Vib. Control 2013
21. X. Li, Y. Wong, and A. Nee Tool wear and chatter detection using the coherence function of two crossed accelerations Int. J. Mach. Tools Manuf. 37 4 1997 425 435
22. Q. Shao, and C.J. Feng Pattern recognition of chatter gestation based on hybrid PCA-SVM Appl. Mech. Mater. 120 2011 190 194
23. S. Tangjitsitcharoen In-process monitoring and detection of chip formation and chatter for CNC turning J. Mater. Process. Technol. 209 10 2009 4682 4688
24. I. Marinescu, and D.A. Axinte A critical analysis of effectiveness of acoustic emission signals to detect tool and workpiece malfunctions in milling operations Int. J. Mach. Tools Manuf. 48 10 2008 1148 1160
25. D.H. Chin, and M.C. Yoon Cutting force monitoring in the endmilling operation for chatter detection Proc. Inst. Mech. Eng. Part B: J. Eng. Manuf. 219 6 2005 455 465
26. Z. Yao, D. Mei, and Z. Chen On-line chatter detection and identification based on wavelet and support vector machine J. Mater. Process. Technol. 210 5 2010 713 719
27. L. Wang Chatter Detection and Suppression using Wavelet And Fuzzy Control Approaches in End Milling 2005 University of Ottawa Thesis
28. L. Wang, and M. Liang Chatter detection based on probability distribution of wavelet modulus maxima Robot. Comput.-Integr. Manuf. 25 6 2009 989 998
29. C.S. Suh, P.P. Khurjekar, and B. Yang Characterisation and identification of dynamic instability in milling operation Mech. Syst. Signal Process. 16 5 2002 853 872
30. T. Choi, and Y.C. Shin On-line chatter detection using wavelet-based parameter estimation J. Manuf. Sci. Eng. 125 1 2003 21
31. E. Al-Regib, and J. Ni Chatter detection in machining using nonlinear energy operator, journal of dynamic systems Meas. Control 132 3 2010 034502
32. T. Insperger, G. Stépán, P. Bayly, and B. Mann Multiple chatter frequencies in milling processes J. Sound Vib. 262 2 2003 333 345
33. L. Vela-Martínez, J.C. Jáuregui-Correa, E. Rubio-Cerda, G. Herrera-Ruiz, and A. Lozano-Guzmán Analysis of compliance between the cutting tool and the workpiece on the stability of a turning process Int. J. Mach. Tools Manuf. 48 9 2008 1054 1062
34. N.E. Huang, Z. Shen, S.R. Long, M.C. Wu, H.H. Shih, Q. Zheng, N.C. Yen, C.C. Tung, and H.H. Liu The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis Proc. R. Soc. A: Math. Phys. Eng. Sci. 454 1971 1998 903 995
35. L. Saidi, J.B. Ali, and F. Fnaiech Bi-spectrum based-EMD applied to the non-stationary vibration signals for bearing faults diagnosis ISA Trans. 53 5 2014 1650 1660
36. J.H. Ahn, D.H. Kwak, and B.H. Koh Fault detection of a roller-bearing system through the EMD of a wavelet denoised signal Sensors 14 8 2014 15022 15038
37. R. Ricci, and P. Pennacchi Diagnostics of gear faults based on EMD and automatic selection of intrinsic mode functions Mech. Syst. Signal Process. 25 3 2011 821 838
38. Y. Peng Empirical model decomposition based time-frequency analysis for the effective detection of tool breakage J. Manuf. Sci. Eng. 128 1 2006 154 166
39. J.E. Raja, L.C. Kiong, and L.W. Soong Hilbert-Huang transform-based emitted sound signal analysis for tool flank wear monitoring Arab. J. Sci. Eng. 38 8 2013 2219 2226
40. X. Li, D.Q. Mei, and Z.C. Chen An Eeffective EMD-based feature extraction method for boring chatter recognition Appl. Mech. Mater. 34-35 2010 1058 1063
41. H. Cao, Y. Lei, and Z. He Chatter identification in end milling process using wavelet packets and Hilbert-Huang transform Int. J. Mach. Tools Manuf. 69 2013 11 19
42. Y. Lei, Z. He, and Y. Zi EEMD method and WNN for fault diagnosis of locomotive roller bearings Expert Syst. Appl. 38 6 2011 7334 7341
43. Z. Wu, and N.E. Huang Ensemble empirical mode decomposition: a noise-assisted data analysis method Adv. Adapt. Data Anal. 1 01 2009 1 41
44. H. Wang, J. Chen, and G. Dong Feature extraction of rolling bearing's early weak fault based on EEMD and tunable Q-factor wavelet transform Mech. Syst. Signal Process. 48 1-2 2014 103 119
45. F. Chen, F. Gu, J. Xu, Z. Liu, and R. Liu A new measurement of complexity for studying EEG mutual information Shengwu Wuli Xuebao 14 3 1997 508 512
46. S. En-hua, C. Zhi-jie, and G. Fan-ji Mathematical foundation of a new complexity measure Appl. Math. Mech. 26 9 2005 1188 1196
47. 0 complexity Int. J. Bifurc. Chaos 19 03 2009 977 992
48. T. Zhang, and Z. Yang Measurement of the complexity for lowgdimensional nonglinear structure of respiratory network in human Acta Biophys. Sin. 21 2 2005
49. F. Chen, J. Xu, F. Gu, X. Yu, X. Meng, and Z. Qiu Dynamic process of information transmission complexity in human brains Biol. Cybern. 83 4 2000 355 366
50. F. Gu, X. Meng, E. Shen, and Z. Cai Can we measure consciousness with EEG complexities? Int. J. Bifurc. Chaos 13 03 2003 733 742
51. H. Peng, B. Hu, F. Zheng, D. Fan, W. Zhao, X. Chen, Y. Yang, and Q. Cai A method of identifying chronic stress by EEG Pers. Ubiquitous Comput. 17 7 2012 1341 1347
52. A. Lempel, and J. Ziv On the complexity of finite sequences IEEE Trans. Inf. Theory 22 1 1976 75 81
53. 0 complexity and its application J. Fudan Univ. (Nat. Sci.) 47 6 2008 791 796
54. J.-I. Shen, J.-W. Hung, L.-S. Lee, Robust entropy-based endpoint detection for speech recognition in noisy environments, in: ICSLP, 1998, pp. 232-235.