Modelling turbulence in engineering and the environment: Second-moment routes to closure

Modelling Turbulence in Engineering and the Environment: Second-Moment Routes to Closure

Volumn , Issue , 2009, Pages 1-379

  Hanjalić, Kemal ^a   Launder, Brian ^b  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84924456867     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9781139013314     Document Type: Book

References (509)

1. Abe, K. and Suga, K., 1998, Large-eddy simulation of passive scalar fields under several strain conditions, Proc. 2nd Engineering Foundation Conf. on Turbulent Heat Transfer, Manchester, UK, 815-830.
2. Abe, K. and Suga, K., 2001, Towards the development of a Reynolds-averaged turbulent scalar-flux model, Int. J. Heat Fluid Flow 22, 19-29.
3. Abrahamsson, H., Johansson, B. and Lofdahl, L., 1997, An investigation of the turbulence field in the fully-developed three-dimensional wall jet. Internal Report 97/1, Chalmers University of Technology, Goteborg, Sweden.
4. Acharya, M. and Reynolds, W. C., 1975, Measurements and predictions of a fully-developed turbulent channel flow with imposed controlled oscillations, Report TF-8, Mech. Eng. Dept., Stanford University, Stanford, CA.
5. Ackerman, J. W., 1970, Pseudo-boiling heat transfer to supercritical-pressure water in smooth and ribbed tubes, ASME J. Heat Transfer 92, 490-498.
6. Addad, Y., Benhamadouche, S. and Laurence, D., 2004, The negatively buoyant wall jet: LES results, Int. J. Heat Fluid Flow 25, 795-808.
7. Alam, M. and Sandham, N. D., 2000, Direct numerical simulations of short laminar separation bubbles, J. Fluid Mech. 403, 223-250.
8. Andre, J. C., de Moor, G., Lacarrère, P. and du Vachat, R., 1976, Turbulence approximation for inhomogeneous flows: Part II. The numerical simulation of a penetrative convection experiment. J. Atmos. Sci. 33, 482-491.
9. Andre, J. C., De Moor, G., Lacarrère, P., Thierry, G. and du Vachat, R., 1978, Modelling the 24-hour evolution of the mean and turbulent structures of the planetary boundary layer, J. Atmos. Sci. 35, 1861-1883.
10. Andre, J. C., de Moor, G., Lacarrère, P., Thierry, G. and du Vachat, R., 1979, The clipping approximation and inhomogeneouos turbulence simulations, in Turbulent Shear Flows 1 (Ed. F. J. Durst et al.), 307-318. Springer Verlag, Heidelberg.
11. Aris, R., 1962, Vectors, Tensors and the Basic Equations of Fluid Mechanics, Prentice Hall, Englewood Clifts NJ.
12. Armitage, C. A., 2001, Computational modelling of double-diffusive flows in stratified media, PhD Thesis, Department of Mechanical Engineering, UMIST, Manchester, UK.
13. Armitage, C. A., Launder, B. E. and Leschziner, M. A., 1998, Second-moment modelling of combined turbulent and species transfer in multiply stratified fluid bodies, Proc. 2nd Engineering Foundation Conf. on Turbulent Heat Transfer, Manchester, UK, 536-547.
14. Bachalo, W. D. and Johnson, D. A., 1986, Transonic turbulent boundary layer separation generated on an axisymmetric flow model, AIAA J. 33, 2026-2031.
15. Badri Narayanan, M. A. and Ramjee, V., 1969, On the criteria for reverse transition in a two dimensional boundary layer flow, J. Fluid Mech. 35, 225-241.
16. Baker, R. J. and Launder, B. E., 1974, The turbulent boundary layer with foreign gas injection: 1. Measurements in zero pressure gradient, Int. J. Heat Mass Transfer 17, 275-291.
17. Barberis, D. and Molton, P., 1995, Shock-wave/turbulent boundary-layer interaction in a three-dimensional turbulent flow, AIAA Paper No. AIAA-95-0227, Reno, Nevada.
18. Basara, B., Aldudak, F., Schrefl, M., Jakirliű, S., Hanjaliű, K., Tropea, C. and Mayer, J., 2007, Experimental investigations and computations of unsteady flow past a real car using a robust elliptic relaxation closure with a universal wall treatment, SAE Paper SAE 2007-01-0104, Society of Automotive Engineers World Congress, Detroit, MI, April 16-19, 2007.
19. Basara, B. and Jakirliű, S., 2003, A new hybrid turbulence modelling strategy for industrial CFD, Int. J. Num. Meth. in Fluids 42, 89-116.
20. Batchelor, G. K. and Townsend, A. A., 1948, Decay of turbulence in the final period, Proc. R. Soc. London 194A, 527-543.
21. Batten, P., Craft, T. J., Leschziner, M. A. and Loyau, H., 1999, Reynolds-stress transport modeling for compressible aerodynamic flows, AIAA J. 37, 785-796.
22. Baughn, J. W. and Shimuzu, S., 1989, Heat transfer measurements from a surface with uniform heat transfer and an impinging jet, ASME J. Heat Transfer 111, 1096-1098.
23. Baughn, J. W. and Yan, X., 1992, Local heat transfer measurements in square ducts with transverse ribs, 28th Natl. Heat Transfer Conf. ASME HTD Vol. 202.
24. Baughn, J. W., Hechanova, A. E. and Yan, X., 1992, An experimental study of entrainment effects on the heat transfer from a flat surface to a heated circular impinging jet, J. Heat Transfer 113, 1023-1025.
25. Baughn, J. W., Yan, X. J. and Mesbah, M., 1992, The effects of Reynolds number on the heat transfer distribution from a flat plate to a turbulent impinging jet, ASME HTD Vol. 226, 1-7.
26. Behnia, M., Parniex, S. and Durbin, P. A., 1998, Prediction of heat transfer in an axisymmet-ric turbulent jet impinging on a flat plate, Int. J. Heat Mass Transfer 41, 1845-1899.
27. Bennett, J. C. and Corrsin, S. C., 1978, Small Reynolds number nearly isotropic turbulence in a straight duct and in a contraction, Phys. Fluids 21, 2129-2140.
28. Bergman, T. L., Incropera, F. P. and Viskanta, R., 1985, A differential model for salt-stratified, double-diffusive systems heated from below, Int. J. Heat Mass Transfer 28, 779-788.
29. Bernard, P. S., 1990, Turbulent vorticity transport in three dimensions, Theor. Comput. Fluid Dyn. 2, 165-183.
30. Bertoglio, J-P., Charnay, G. and Mathieu, J., 1980, Effets de la rotation sur un champ turbulent cisaillé: application au cas des turbomachines, J. Méc. 4, 421-443.
31. Borello, D., Hanjaliű, K. and Rispoli, F., 2005, Prediction of cascade flows with innovative second-moment closures, ASME J. Fluids Eng. 127, 1059-1070.
32. Boudjemadi, R., Maupu, V., Laurence, D. and Le Quéré, P., 1997, Budgets of turbulent stresses and fluxes in a vertical slot natural convection at Rayleigh Ra = 105 and 5.4 x 105, Int. J. Heat Fluid Flow 18, 70-79.
33. Bradshaw, P., 1967, The turbulence structure of equilibrium boundary layers, J. Fluid Mech. 29, 625-645.
34. Bradshaw, P., 1971, An Introduction to Turbulence and its Measurements. Pergamon Press, Oxford.
35. Bradshaw, P., 1973, Effect of streamline curvature on turbulent flow, AGARDograph 169.
36. Bradshaw, P., 1976, Introduction, in Turbulence (Ed. P. Bradshaw), Topics in Applied Physics, Vol. 12, 1-44, Springer Verlag, Berlin.
37. Bradshaw, P., Ferriss, D. H. and Atwell, N. P., 1967, Calculation of boundary layer development using the turbulent energy equation, J. Fluid Mech. 28, 593-616.
38. Bradshaw, P., Mansour, N. N. and Piomelli, U., 1987, On local approximations of the pressure-strain term in turbulence models, Studying turbulence using numerical simulation data bases, Proc. 1987 Summer Program, Center for Turbulence Research, 159-164, Report CTR-S87, Stanford University, Stanford, CA.
39. Branover, H., 1978, Magnetohydrodynamic Flow in Ducts, Wiley, New York.
40. Brasseur, J. M. and Lee, M., 1987, Local structure of intercomponent energy transfer in homogeneous turbulent shear flow, Studying turbulence using numerical simulation data bases, Proc. 1987 Summer Program, Center for Turbulence Research, 165-178, Report CTR-S87, Stanford University, Stanford, CA.
41. Bremhorst, K. and Gehrke, P. J., 2000, Measured Reynolds stress distributions and energy budgets of a fully-pulsed round air jet, Exp. Fluids 28, 519-531.
42. Bremhorst, K., Craft, T. J. and Launder, B. E., 2003, Two-time-scale turbulence modelling of a fully-pulsed axisymmetric air jet. Proc. 3rd Int. Symp. on Turbulence & Shear Flow Phenomena, Sendai, Japan, 711-716.
43. Brouillette, E. C. and Lykoudis, P. S., 1967, Magneto-fluid-mechanic channel flow. I. Experiment, Phys. Fluids 10, 995-1001.
44. Businger, J. A., Wyngaard, J. C., Izumi, Y. and Bradley, E. F., 1971, Flux-profile relationships in the atmospheric surface layer, J. Atmos. Sci. 28, 181-189.
45. Cadiou, A., Hanjaliű, K. and Starwiaski, K., 2004, A two-scale second-moment turbulence closure based on weighted spectrum integration, Theor. Comput. Fluid Dyn. 18, 1-26.
46. Carr, A. D., Connor, M. A. and Buhr, H. O., 1973, Velocity, temperature and turbulence measurements in air for pipe flow with combined free and forced convection, Trans. ASME J. Heat Transfer 95, 445-452.
47. Castro, I. and Bradshaw, P., 1976, The turbulence structure of a highly curved mixing layer, J. Fluid Mech. 73, 265-304.
48. Cebeci, T., 1999, An Engineering Approach to the Calculation of Aerodynamic Flows, Springer, New York.
49. Cebeci, T. and Mosinskis, G. J., 1971, The calculation of incompressible turbulent boundary layers with mass transfer including highly accelerated flows, ASME J. Heat Transfer93, 271-280.
50. Cebeci, T. and Smith, A. M. O., 1974, Analysis of Turbulent Boundary Layers, Academic Press, New York.
51. Celenligel, M. C. and Mellor, G. L., 1985, Numerical solution of two-dimensional separated flows using a Reynolds-stress closure model, ASME J. Fluids Eng. 107, 467-476.
52. Champagne, F., Harris, V. and Corrsin, S. C., 1970, Experiments on nearly homogeneous shear flows, J. Fluid Mech. 41, 81-139.
53. Chaouat, B. and Schiestel, R., 2005, A new partially integrated transport model for subgrid-scale stresses and dissipation rate for turbulent developing flows, Phys. Fluids 17, 65-106.
54. Chaouat, B. and Schiestel, R., 2007, From single-scale turbulence models to multiple scale and sub-grid-scale models by Fourier transform, Theor. Comput. Fluid Dyn. 21, 201-229.
55. Chavanne, X., Chillà, F., Chabaud, B., Castaign, B., Chaussy, J. and Hebral, B., 1996, High Rayleigh number convection with gaseous helium at low temperature, J. Low Temp. Phys. 104, 109-129.
56. Cheah, S. C., Iacovides, H., Jackson, D. C., Ji, H-H. and Launder, B. E., 1996, LDA investigation of the flow development through rotating U-ducts, J. Turbomachinery 118, 590-596.
57. Chen, C. J. and Rodi, W., 1980, Vertical Turbulent Buoyant Jets: A Review of Experimental Data, Pergamon, Oxford.
58. Chien, K-Y., 1982, Prediction of channel and boundary layer flows with a low-Reynolds-number turbulence model, AIAA J. 20, 33-38.
59. Chieng, C. C. and Launder, B. E., 1980, On the calculation of turbulent heat transport downstream from an abrupt pipe expansion, Numerical Heat Transfer 3, 189-207.
60. Choi, Y. D., Iacovides, H. and Launder, B. E., 1989, Numerical computation of turbulent flow in a square-sectioned 180° bend, J. Fluids Eng. 111, 59-68.
61. Chou, P.-Y., 1945, On the velocity correlations and the solutions of the equations of turbulent fluctuation, Q, J. Appl. Math. 3, 38-54.
62. Chow, J. S., Zilliac, G. G. and Bradshaw, P., 1997, Mean and turbulence measurements in the near field of a wingtip vortex, AIAA J. 35, 1561-1567 (see also NASA TM 110418).
63. Chu, V. E. and Baddour, R. E., 1984, Turbulent gravity-stratified shear flows, J Fluid Mech. 138, 353-378.
64. Ciofalo, M. and Collins, M. W., 1989, The k-e predictions of heat transfer in turbulent recirculating flows using an improved wall treatment, Numerical Heat Transfer B Fundamentals 15, 21-47.
65. Clark, T. T. and Zemach, C., 1995, A spectral model applied to homogeneous turbulence, Phys. Fluids 7, 1674-1694.
66. Coles, D., 1956, The law of the wake in the turbulent boundary layer, J. Fluid Mech. 1, 191-226.
67. Comte-Bellot, G. and Corrsin, S., 1966, The use of a contraction to improve the isotropy of grid-generated turbulence, J. Fluid Mech. 25, 657-682.
68. Cooper, D., Jackson, D. C., Launder, B. E. and Liao, G.-X., 1993, Impinging jet studies for turbulence model assessment, Int. J. Heat Mass Transfer 36, 2675-2684.
69. Cormack, D. E., Leal, L. G. and Seinfeld, J. H., 1978, An evaluation of Reynolds stress turbulence models: the triple velocity correlations, ASME J. Fluids Eng., 100, 47-54.
70. Corrsin, S., 1952, Heat transfer in isotropic turbulence, J. Appl. Phys. 23, 113-118.
71. Cotton, M. A. and Ismael, J. O., 1998, A strain parameter turbulence model and its application to homogeneous and thin shear flows, Int. J. Heat Fluid Flow 19, 326-337.
72. Cotton, M. A. and Jackson, J. D., 1987, Calculation of turbulent mixed convection in vertical tubes using a low-Reynolds-number k-e turbulence model, Paper 9.6 Proc. 6th Symp. on Turbulent Shear Flows, Toulouse, France.
73. Cotton, M. A. and Jackson, J. D., 1990, Vertical tube air flows in the turbulent mixed convection regime calculated using a low-Reynolds-number k-e model, Int. J. Heat Mass Transfer 33, 275-286.
74. Cousteix, J. and Aupoix, B., 1981, Reynolds stress equations modeling in a rotating reference frame, Recherche Aérospatiale No 1981-4, CERT, ONERA
75. Cousteix, J., Desopper, A. and Houdeville, R., 1979, Structure and development of a turbulent boundary layer in an oscillatory external flow, in Turbulent Shear Flows 1 (Ed. F. J. Durst et al.), 154-171, Springer Verlag, Berlin.
76. Craft, T. J., 1991, Second-moment modeling of turbulent scalar transport, PhD Thesis, Faculty of Technology, University of Manchester, UK.
77. Craft, T. J., 1998, Developments in a low-Reynolds-number second-moment closure and its application to separating and reattaching flows, Int. J. Heat Fluid Flow 19, 541-548.
78. Craft, T. J., 2002, Modelling of separating and impinging flows, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 11, 341-360, Cambridge University Press, Cambridge.
79. Craft, T. J. and Launder, B. E., 1989, A new model for the pressure/scalar-gradient correlation and its application to homogeneous and inhomogeneous free shear flows, Paper 17.1, Proc. 7th Symp. on Turbulent Shear Flows, Stanford University, Stanford, CA.
80. Craft, T. J. and Launder, B. E., 1991, Computation of impinging flows using second-moment closures, Paper 8.5, Proc. 8th Symp. on Turbulent Shear Flows, Technical University of Munich, Germany.
81. Craft, T. J. and Launder, B. E., 1992, New wall-reflection model applied to the turbulent impinging jet, AIAA J. 30, 2970-2972.
82. Craft, T. J. and Launder, B. E., 1996, A Reynolds-stress closure designed for complex geometries, Int. J. Heat Fluid Flow 17, 245-254.
83. Craft, T. J. and Launder, B. E., 2002a, Closure modelling near the two-component limit, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 3, 102-126, Cambridge University Press, Cambridge.
84. Craft, T. J. and Launder, B. E., 2002b, Application of TCL modelling to stratified flows, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 14, 407-423, Cambridge University Press, Cambridge.
85. Craft, T. J. and Launder, B. E., 2002c, On the spreading mechanism of the three-dimensional turbulent wall jet, J. Fluid Mech. 435, 305-326.
86. Craft, T. J., Graham, L. J. and Launder, B. E., 1993, Impinging jet studies for turbulence model assessment: 2. An examination of the performance of four turbulence models, Int. J. Heat Mass Transfer 36, 2685-2697.
87. Craft, T. J., Ince, N. Z. and Launder, B. E., 1996a, Recent developments in second-moment closure for buoyancy-affected flows, Dyn. Atmos. Oceans 23, 99-114.
88. Craft, T. J., Launder, B. E. and Suga, K., 1996b, Development and application of a cubic eddy-viscosity model of turbulence, Int. J. Heat Fluid Flow 17, 108-115.
89. Craft, T. J., Kidger, J. W. and Launder, B. E., 1997a, Importance of 3rd-moment modelling in horizontal, stably stratified flow, Proc 11th Symp. on Turbulent Shear Flows, Grenoble, France, 20.13-20.18.
90. Craft, T. J., Launder, B. E. and Suga, K., 1997b, Prediction of turbulent transitional phenomena with a nonlinear eddy-viscosity model, Int. J. Heat Fluid Flow 18, 15-28.
91. Craft, T. J., Kidger, J. W. and Launder, B. E., 2000, Second-moment modeling of developing and self-similar turbulent three-dimensional free-surface jets, Int. J. Heat Fluid Flow 21, 338-344.
92. Craft, T. J., Gerasimov, A. V., Iacovides, H. and Launder, B. E., 2002, Progress in the generalization of wall-function treatments, Int. J. Heat Fluid Flow 23, 148-160.
93. Craft, T. J., Gerasimov, A. V., Iacovides, H. and Launder, B. E., 2004a, The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling, Int. J. Heat Fluid Flow 25, 809-823.
94. Craft, T. J., Gant, S. E., Iacovides, H. and Launder, B. E., 2004b, A new wall-function strategy for complex turbulent flows, Numerical Heat Transfer, B Fundamentals 45, 301-318.
95. Craft, T. J., Gant, S. E., Gerasimov, A. V., Iacovides, H. and Launder, B. E., 2006a, Numerical modelling of wall heat transfer in wall-adjacent turbulent flows, in Handbook of Numerical Heat Transfer (Ed. W. J. Minkowycz, E. M. Sparrow and J. Y. Murthy), 369-388, 2nd edition, Wiley, Hoboken, NJ.
96. Craft, T. J., Gerasimov, A. V., Launder, B. E. and Robinson, C. M., 2006b, A computational study of the near-field generation and decay of wingtip vortices, Int. J. Heat Fluid Flow 27, 684-695.
97. Craft, T. J., Iacovides, H., Launder, B. E. and Zacharos, A., 2008, Some swirling-flow challenges for turbulent CFD, Flow, Turbulence Combust. 80, 419-434.
98. Crow, S. C., 1968, Visco-elastic properties of fine-grained incompressible turbulence, J. Fluid Mech. 33, 1-20.
99. Czarny, O., Iacovides, H. and Launder, B. E., 2002, Precessing vortex structures within rotor-stator disc cavities, Flow, Turbulence Combust. 69, 51-61.
100. Dakos, T. and Gibson, M. M., 1985, On modelling the pressure terms of the scalar-flux equations, pp. 121-126, Proc 5th Turbulent Shear Flow Symposium, Cornell University, Ithaca, NY.
101. Daly, B. J. and Harlow, F. H., 1970, Transport equations in turbulence, Phys. Fluids 13, 2634-2649.
102. Davidov, B. I., 1959, On the statistical dynamics of an incompressible turbulent fluid, Dokl. Akad. Nauk SSSR, 127, 768 (translated in Soviet Physics-Doklady 4, 769).
103. Davidov, B. I., 1961, On the statistical dynamics of an incompressible turbulent fluid, Dokl. Akad. Nauk SSSR, 136, 47-50 (translated in Soviet Physics-Doklady, 6, 10).
104. Davidson, P. A., 2004, Turbulence, Oxford University Press, Oxford.
105. Deardorff, J. W., Willis, G. E. and Lilly, D. K., 1969, Laboratory investigation of non-steady penetrative convection, J. Fluid Mech. 35, 7-31.
106. Dekeyser, I., 1982, Etude d’un jet plan dissymmetrique chauffé en regime turbulent incompressible, These Docteur-es-Sciences, Université d’Aix-Marseille II, France.
107. Dekeyser, I. and Launder, B. E., 1985, A comparison of triple-moment temperature-velocity correlations in the asymmetric heated jet with alternative closure models. In Turbulent Shear Flows 4 (Ed. L. J. S. Bradbury et al.), 102-117, Springer Verlag, Heidelberg.
108. Demuren, A. O., Rogers, M. M., Durbin, P. and Lele, S. K., 1996, On modeling pressure diffusion in non-homogeneous shear flows, Proc. Summer Program, Center for Turbulence Research, NASA Ames/Stanford University, 63-72.
109. Dol, H., 1998, Turbulence models for natural convection in side-heated enclosures, PhD Thesis, Delft University of Technology, Delft, The Netherlands.
110. Dol, H. S. and Hanjaliű, K., 2001, Computational study of turbulent natural convection in a side-heated near-cubic enclosure at a high Rayleigh number, Int. J. Heat Mass Transfer 44, 2323-2344.
111. Dol, H. S., Hanjaliű, K. and Kenjeres, S., 1997, A comparative assessment of the second-moment differential and algebraic models in turbulent natural convection, Int. J. Heat Fluid Flow 18,4-14.
112. Dol, H., Hanjaliű, K. and Versteegh, T. A. M., 1999, A DNS-based thermal second-moment closure for buoyant convection at vertical walls, J Fluid Mech. 391, 211-247.
113. Donaldson, C. du P., 1971, A progress report on an attempt to construct an invariant model of turbulent shear flows, Proc. AGARD Confon Turbulent Shear Flows, London. Paper B-1.
114. Donaldson, C. du P., Sullivan, R. D. and Rosenbaum, H., 1972, A theoretical study of the generation of atmospheric clear-air turbulence, AIAA J. 10, 162-170.
115. Durbin, P. A., 1991, Near-wall turbulence closure modelling without damping functions, Theor. Comput. Fluid Dyn. 3, 1-13.
116. Durbin, P. A., 1993, A Reynolds stress model for near-wall turbulence, J. Fluid Mech. 249, 465-498.
117. Durbin, P. A., 1995, Separated flow computations with the k-e-V2 model, AIAA J. 33, 659-664.
118. Durbin, P. A., 1996, On the k-e stagnation point anomaly, Int. J. Heat Fluid Flow 17, 89-90.
119. Eckelmann, H., 1970, Experimentelle Untersuchungen in einer turbulenten Kanalströmung mit starken viscosen Wandschichten, Mitt. Max Planck Inst. F. Strömungsforschung, No. 48, Göttingen, Germany.
120. Egorov, Y., Menter, F. R., Lechner, R. and Cokljat, D., 2010, The scale-adaptive simulation method for unsteady turbulent flow predictions. Part 2: application to complex flows, Flow, Turbulence Combust. 85, 139-165.
121. El Baz, A. M., Craft, T. J., Ince, N. Z. and Launder, B. E., 1993, On the adequacy of the thin-shear-flow equations for computing turbulent jets in stagnant surroundings, Int. J. Heat Fluid Flow 14, 164-169.
122. El Baz, A. M., Launder, B. E. and Nemouchi, Z., 1989, On the prediction of memory effects in plane turbulent wakes, Paper T-4, Proc. 7th Symposium on Turbulent Shear Flows, Stanford University, Stanford, CA.
123. Elena, L., 1994, Modelisation de la turbulence inhomogène en présence de rotation, Thèse doctoral, Université d’Aix-Marseille II, France.
124. Elena, L. and Schiestel, R., 1996, Turbulence modelling of rotating confined flows, Int. J. Heat Fluid Flow 17, 283-289.
125. Elghobashi, S. and Launder, B. E., 1983, Turbulent time scales and the dissipation rate of temperature variance in the turbulent mixing layer, Phys. Fluids 26, 2415-2419.
126. Eringen, A. C., 1962, Non-Linear Theory of Continuous Media, p. 93, McGraw Hill, New York.
127. Esch, T. and Menter, F. R., 2003, Heat transfer predictions based on two-equation turbulence models with advanced wall treatment, in Turbulence, Heat and Mass Transfer 4 (Ed. K. Hanjaliű, Y. Nagano and M. Tummers), 633-640, Begell House, New York.
128. Favre, A., 1965, Equations des gaz turbulents compressibles: Formes générales, J. Méc. 4, 361-390.
129. Fernholz, H. H. and Warnack, D., 1998, The effects of a favorable pressure gradient and of Reynolds number on an incompressible axisymmetric boundary layer, J. Fluid Mech. 359, 329-356.
130. Forstall, W. and Shapiro, A. H., 1950, Momentum and mass transfer in coaxial gas jets, ASME J. Appl. Mech. 17, 399.
131. Freymuth, P. and Uberoi, M. S., 1973, Temperature fluctuations in a turbulent wake behind an optically heated sphere, Phys. Fluids 16, 161-168.
132. Fu, S., 1988, Computational modelling of turbulent swirling flows with second-moment closures, PhD Thesis, Faculty of Engineering, University of Manchester, Manchester, UK.
133. Fu, S. and Wang, C., 1997, Second-moment closure modelling of turbulence in a non-inertial frame, Fluid Dyn. Res. 20, 43-65.
134. Fu, S., Launder, B. E. and Leschziner, M. A., 1987a, Modelling strongly swirling recirculating jet flows with Reynolds stress transport closures, Paper 1.5, Proc. 6th Symp. on Turbulent Shear Flows, Toulouse, France.
135. Fu, S., Launder, B. E. and Tselepidakis, D. P., 1987b, Accommodating the effects of high strain rates in modelling the pressure-strain correlation, Tech. Rep. FD/87/5,. Mech. Eng. Dept., UMIST, Manchester, UK.
136. Fu, S., Huang, P. G., Launder, B. E. and Leschziner, M. A., 1988, A comparison of algebraic and differential second-moment closures for axisymmetric free shear flows with and without swirl, J. Fluids Eng. 110, 216-221.
137. Gan, X., Kilic, M. and Owen, J. M., 1995, Flow between contra-rotating discs, J. Turbomachinery 117, 298-305.
138. Gant, S. E., 2002, Development and application of a new wall function for complex turbulent flows, PhD Thesis, Mech., Aerosp. & Manufacturing Eng. Dept., UMIST, Manchester, UK.
139. Gardner, R. A. and Lykoudis, P. S., 1971, Magneto-fluid-mechanic pipe flow in a transverse magnetic field. 1. Isothermal flow, J. Fluid Mech. 47, 737-764.
140. Gatski, T. B. and Bonnet, J-P., Compressibility, Turbulence and High-Speed Flow, Elsevier, Oxford, 2009.
141. Gatski, T. B. and Rumsey, C. L., 2002, Linear and non-linear eddy viscosity models, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 1, 9-46, Cambridge University Press, Cambridge.
142. Gatski, T. B. and Speziale, C., 1993, On explicit algebraic stress models for complex turbulent flows, J. Fluid Mech. 254, 59-78.
143. Geers, L. F. G., 2004, Multiple-impinging jet arrays: an experimental study on flow and heat transfer, PhD Thesis, Delft University of Technology, Delft, The Netherlands.
144. Gence, J. N. and Mathieu, J., 1979, Application of successive plane strains to grid-generated turbulence, J. Fluid Mech. 93, 501-513.
145. Gerasimov, A. V., 2003, Development and application of an analytical wall-function strategy for modelling forced, mixed and natural convection phenomena, PhD Thesis, UMIST, Manchester, UK.
146. Gibson, M. M. and Launder, B. E., 1976, On the calculation of horizontal, turbulent, free shear flows under gravitational influence, ASME J. Heat Transfer 98C, 379-386.
147. Gibson, M. M. and Launder, B. E., 1978, Ground effects on pressure fluctuations in the atmospheric boundary layer, J. Fluid Mech. 86,491-511.
148. Gibson, M. M. and Rodi, W., 1981, A Reynolds stress closure model of turbulence applied to the calculation of a highly curved mixing layer, J. Fluid Mech. 101, 161-182.
149. Gibson, M. M. and Younis, B. A., 1986, The calculation of swirling jets with a Reynoldsstress closure, Phys. Fluids 29, 38-48.
150. Gibson, M. M., Jones, W. P. and Kanellopoulos, V. E., 1987, Turbulent temperature mixing layer: measurement and modelling, Paper 9-5, Proc. 6 Symp. on Turbulent Shear Flows, Toulouse, France.
151. Gilbert, N. and Kleiser, L., 1991, Turbulence model testing with the aid of direct numerical simulation results, Paper 26.1, Proc. 8th Int. Symp. on Turbulent Shear Flows, Munich, Germany.
152. Girimaji, S. S., 1996, Fully explicit and self-consistent algebraic Reynolds stress model, Theor. Comput. Fluid Dyn. 8, 387-402.
153. Girimaji, S. S., 2006, Partially-averaged Navier-Stokes model for turbulence: a Reynolds-averaged Navier-Stokes to direct numerical simulation bridging method, J. Appl. Mech. 73,413-421.
154. Girimaji, S. S., Jeong, E. and Srinivasan, R., 2006, Partially-averaged Navier-Stokes model for turbulence: fixed point analysis and comparison with unsteady partially-averaged Navier-Stokes, J. Appl. Mech. 73, 422-429.
155. Gleize, V., Schiestel, R. and Couaillier, V., 1996, Multiple scale modelling of turbulent non-equilibrium boundary layers, Phys. Fluids 8, 2716-2732.
156. Gorski, J. J. and Bernard, P. S., 1996, Modeling of the turbulent enstrophy equation, Int. J. Eng. Sci. 34, 699-714.
157. Gosse, J. and Schiestel, R., 1974, The prediction of turbulent forced convection with a new model, Paper FC4.1, 5th Int. Heat Transfer Conf., Tokyo, Japan.
158. Greenspan, H. P., 1962, The Theory of Rotating Fluids, Cambridge University Press, Cambridge.
159. Groth, J., 1991, Description of the pressure effects in the Reynolds stress transport equations, Phys. Fluids A3(9), 2276-2277.
160. Grundestam, O., Wallin, S. and Johansson, A. V., 2005, An explicit algebraic Reynolds stress model based on a non-linear pressure strain rate model, Int. J. Heat Fluid Flow 26, 232-745.
161. Ha Minh, H. and Kourta, A., 1993, Semi-deterministic turbulence modelling for flows dominated by strong orgaized structures, 10.5-1-10.5-6, Proc. 9th Symp. on Turbulent Shear Flows, Kyoto, Japan.
162. Hadžić, I., 1999, Second-moment closure modelling of transitional and unsteady turbulent flows, PhD Thesis, Delft University of Technology, Delft, The Netherlands.
163. Hadžić, I. and Hanjaliű, K., 1999, Separation-induced transition to turbulence: second-moment closure modelling, Flow, Turbulence Combust. 63, 153-173.
164. Hadžić, I., Hanjaliű, K. and Laurence, D., 2001, Modeling the response of turbulence subjected to cyclic irrotational strain, Phys. Fluids 13, 1739-1747.
165. Hall, W. B. and Jackson, J. D., 1969, Laminarization of a turbulent pipe flow by buoyancy, ASME Paper 69-HT-55.
166. Hallbäck, M., Groth, J. and Johansson, A. V., 1990, An algebraic model for nonisotropic turbulent dissipation rate in Reynolds stress closures, Phys. Fluids A 2, 1859-1866.
167. Hanjaliű, K., 1970, Two-dimensional asymmetric turbulent flow in ducts, PhD Thesis, Imperial College, University of London, UK.
168. Hanjaliű, K., 1994, Advanced turbulence closure models: a view of current status and future prospects, Int. J. Heat Fluid Flow 15, 178-203.
169. Hanjaliű, K., 1996, Some resolved and unresolved issues in modeling non-equilibrium and unsteady turbulent flows, in Engineering Turbulence Modelling and Experiments - 3 (Ed. W. Rodi and G. Bergeles), 3-18, Elsevier, Amsterdam.
170. Hanjaliű, K., 1999, Second-moment turbulence closures for CFD: need and prospects, Int. J. CFD 12, 67-97.
171. Hanjaliű, K., 2002, One-point closure models for buoyancy-driven turbulent flows, Annu. Rev. Fluid Mech. 34, 21-47.
172. Hanjaliű, K., 2004, Closure models for incompressible turbulent flows, Introduction to the Modelling of Turbulence, Lecture Series 2004-06 (also 2002-04), Von Karman Institute, Rhode St Genese, Belgium.
173. Hanjaliű, K. and Jakirliű, S., 1993, A model of stress dissipation in second-moment closures, Appl. Sci. Res. 51, 513-518.
174. Hanjaliű, K. and Jakirliű, S., 1998, Contribution towards the second-moment closure modelling of separating turbulent flows, Computers Fluids 27, 137-156.
175. Hanjaliű, K. and Jakirliű, S., 2002, Second-moment turbulence closure modelling, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder & N. D. Sandham), Chapter 2, 47-101, Cambridge University Press, Cambridge.
176. Hanjaliű, K. and Kenjereš, S., 2000, Reorganization of turbulence structure in magnetic Rayleigh-Bénard convection: A T-RANS study, J. Turbulence, http://jot.iop.org/S1468-5248(00)17901-9 (electronic publication), 22 pages.
177. Hanjaliű, K. and Kenjereš, S., 2001, T-RANs simulation of deterministic eddy structure in flows driven by thermal buoyancy and Lorentz force, Flow, Turbulence Combust. 66, 427-451.
178. Hanjaliű, K. and Kenjereš, S., 2002, Simulations of coherent eddy structures in buoyancy-driven flows with single point turbulence closure models, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 22, 659-684, Cambridge University Press, Cambridge.
179. Hanjaliű, K. and Launder, B. E., 1972a, Fully developed asymmetric flow in a plane channel, J. Fluid Mech. 51, 301-335.
180. Hanjaliű, K. and Launder, B. E., 1972b, A Reynolds stress model of turbulence and its application to thin shear flows, J. Fluid Mech. 52, 609-638.
181. Hanjaliű, K. and Launder, B. E., 1976, Contribution towards a Reynolds-stress closure for low-Reynolds-number turbulence, J. Fluid Mech. 74, 593-610.
182. Hanjaliű, K. and Launder, B. E., 1980, Sensitizing the dissipation equation to irrotational strains, ASME J. Fluids Eng. 102, 34-40.
183. Hanjaliű, K. and Musemić, R., 1997, Modelling the dynamics of double-diffusive scalar fields at various stability conditions, Int. J. Heat Fluid Flow 18, 360-367.
184. Hanjaliű, K. and Stožić, N., 1985, Hysteresis of turbulent stresses in wall flows subjected to periodic disturbances, in Turbulent Shear Flows 4 (Ed. F. Durst et al.), 287-300, Springer Verlag, Berlin.
185. Hanjaliű, K. and Vasić, 1993, Some further exploration of turbulence models for buoyancy driven flows, in Turbulent Shear Flows 8 (Ed. F. Durst et al.), 319-341, Springer Verlag, Heidelberg.
186. Hanjaliű, K., Jakirliű, S. and Durst, F., 1994, A computational study of joint effects of transverse shear and streamwise acceleration on three-dimensional boundary layers, Int. J. Heat Fluid Flow 15, 269-282.
187. Hanjaliű, K., Jakirliű, S. and Hadžić, I., 1995, Computation of oscillating turbulent flows at transitional Re-numbers, in Turbulent Shear Flows 9 (Ed. F. Durst et al.), 323-342, Springer-Verlag, Berlin.
188. Hanjaliű, K., Jakirliű, S. and Hadžić, I., 1997, Expanding the limits of ‘equilibrium’ second-moment turbulence closures, Fluid Dyn. Res. 20, 25-41.
189. Hanjaliű, K., Hadžić, I. and Jakirliű, S., 1999, Modeling turbulent wall flows subjected to strong pressure variations, ASME J. Fluids Eng. 12, 57-64.
190. Hanjaliű, K., Launder, B. E. and Schiestel, R., 1980, Multiple-time-scale concepts in turbulent transport modelling, in Turbulent Shear Flows 2 (Ed. L. J. S. Bradbury et al.), 36-49, Springer Verlag, Heidelberg.
191. Hanjaliű, K., Popovac, M. and Hadžiabdić, M., 2004, A robust near-wall elliptic-relaxation eddy-viscosity turbulence model for CFD, Int. J. Heat Fluid Flow 25, 1047-1051.
192. Hanjaliű, K., Laurence, D., Popovac, M. and Uribe, C., 2005, (v2/k-f) turbulence model and its application to forced and natural convection, in Engineering Turbulence Modelling and Experiments (Ed. W. Rodi and M. Mulas), Vol. 6, 67-76, Elsevier, Amsterdam.
193. Harris, V. G., Graham, J. A. and Corrsin, S., 1977, Further experiments on a nearly homogeneous turbulent shear flow, J. Fluid Mech. 81, 657-687.
194. Hino, M., Kashiwayanagi, M., Nakayama, A. and Hara, T., 1983, Experiments on the turbulence statistics and the structure of a reciprocating oscillatory flow, J. Fluid Mech. 131, 364-400.
195. Hinze, J. O., 1973, Experimental investigation on secondary currrents in turbulent flow through a straight conduit, Appl. Sci. Res. 28, 453-465.
196. Hinze, J. O., 1975, Turbulence, 2nd edition, McGraw Hill, New York.
197. Hogg, S. and Leschziner, M., 1989, Computation of highly swirling confined flow with a Reynolds stress turbulence model, AIAA J. 27, 57-63.
198. Hossain, M. S. and Rodi, W., 1982, A turbulence model for buoyant flows and its application to vertically buoyant jets, in Turbulent Buoyant Jets and Plumes (Ed. W. Rodi), HMT Series Vol. 6, 122-178, Pergamon Press, Oxford.
199. Hoyas, S. and Jimenez, J., 2006, Scaling of velocity fluctuations in turbulent channels up to ReT = 2003, Phys. Fluids 18, 0011702 (database: http://torroja.dmt.upm.es/ftp/channels/data/).
200. Hoyas, S. and Jimenez, J., 2008, Reynolds number effects on the Reynolds-stress budgets in turbulent channels, Phys. Fluids 20, 101-511.
201. Huang, P. G., 1986, The computation of elliptic turbulent flows with second-moment-closure models, PhD Thesis, Faculty of Technology, University of Manchester, Manchester, UK.
202. Hussein, J. H., Capp, S. and George, W. K., 1994, Velocity measurements in a highReynolds-number momentum-conserving axisymmetric turbulent jet, J. Fluid Mech. 258, 31-75.
203. Iacovides, H. and Launder, B. E., 1985, ASM predictions of turbulent momentum and heat transfer in coils and U-bends, in Numerical Methods in Laminar and Turbulent Flow (Ed. C. Taylor et al.), 1023-1045, Pineridge Press, Swansea.
204. Iacovides, H. and Raisee, M., 1997, Computation of flow and heat transfer in 2D rib-roughened passages, in Turbulence, Heat and Mass Transfer 2-supplement (Ed. K. Hanjaliű & T. Peeters), Delft University Press, Delft (see also Int. J. Num. Meth. Heat Fluid Flow 11, 138-155, 2001).
205. Iacovides, H. and Raisee, M., 1999, Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades, Int. J. Heat Fluid Flow 20, 320-328.
206. Iacovides, H. and Toumpankis, P., 1993, A turbulence modeling of flow in axisymmetric rotor-stator systems, Proc. IAHRInt. Symp. on Refined Flow Modelling and Turbulence Measurements, Paris, France.
207. Iacovides, H., Launder, B. E. and Loizou, P. A., 1987, Numerical computation of flow through a 90° bend, Int. J. Heat Fluid Flow 8, 320-325.
208. Iacovides, H., Nikas, K. S. and Te Braak, M., 1996, Turbulent flow computations in rotating cavities using Low-Reynolds-number models, Paper 96-GT-159, ASME Int. Gas Turbine Congress, Birmingham, UK.
209. Iacovides, H., Launder, B. E. and Zacharos, A., 2009, The economical computation of unsteady flow structures in rotating cavities, Proc. 6th Int. Symp. on Turbulence & Shear Flow Phenomena, 797-802.
210. Ilyushin, B. B., 2002, Higher moment diffusion in stable stratification, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 15, 424-448, Cambridge University Press, Cambridge.
211. Ince, N. Z. and Launder, B. E., 1989, On the computation of buoyancy-driven turbulent flows in rectangular enclosures, Int. J. Heat Fluid Flow 10, 110-117.
212. Ince, N. Z. and Launder, B. E., 1995, Three-dimensional and heat-loss effects on turbulent flow in a nominally two-dimensional cavity, Int. J. Heat Fluid Flow 16, 171-177.
213. Itoh, M., Yamada, Y., Imao, S. and Gonda, M., 1990, Experiments on turbulent flow due to an enclosed rotating disk, Proc. 1st Conference on Engineering Turbulence Modelling & Measurements (Ed. W. Rodi & E. N. Ganic), 659-668, Elsevier Science, New York.
214. Jackson, J. D., Cotton, M. A. and Axcell, B. P., 1989, Studies of mixed convection in vertical tubes, Int. J. Heat Fluid Flow 10, 2-15.
215. Jackson, J. D., He, S., Xu, Z. and Wu, T., 2002, CFD Quality and Trust: Generic studies of thermal convection, Rep HTH/GNSR/5029, University of Manchester, UK.
216. Jakirliű, S., 1997, Reynolds-Spannungs-Modellierung komplexer turbulenter Strömungen, Doktor Arbeit, Universitat Erlangen-Nürnberg, Germany, Herbert Utz Verlag, Munich.
217. Jakirliű, S., 2004, A DNS-based scrutiny of RANS approaches and their potential for predicting turbulent flows, Habilitation Thesis, Technishe Universitat Darmstadt, Germany.
218. Jakirliű, S. and Hanjaliű, K., 1995, A second-moment closure for non-equilibrium separating high and low Re-number flows, Proc. 10th Symp. on Turbulent Shear Flows, Pennsylvania State University, PA, Vol. 3, 2325-2330.
219. Jakirliű, S. and Hanjaliű, K., 2002, A new approach to modelling near-wall turbulence energy and stress dissipation, J. Fluid Mech. 459, 139-166.
220. Jakirliű, S., Volkert, J., Pascal, H., Hanjaliű, K. and Tropea C., 2000, DNS, experimental and modelling study of axially compressed in-cylinder swirling flow, Int. J. Heat Fluid Flow 21, 627-639.
221. Jakirliű, S., Hanjaliű, K. and Tropea C., 2002, Modeling rotating and swirling flows: a perpetual challenge, AIAA J. 40, 1984-1996.
222. Jayatilleke, C. L. V., 1969, The influence of Prandtl number and surface roughness on the resistence of the laminar sub-layer to momentum and heat transfer, Prog. Heat Transfer 1, 193-199.
223. Ji, H. C. and Gardner, R. A., 1997, Numerical analysis of turbulent pipe flow in a transverse magnetic field, Int. J. Heat Mass Transfer 40, 1839-1851.
224. Johansson, A. V. and Hallbäck, M., 1994, Modelling of rapid pressure strain in Reynolds stress closures, J. Fluid Mech. 269, 143-168.
225. Johnston, J. P., Halleen, R. M. and Lezius, D. K., 1972, Effects of spanwise rotation on the structure of two-dimensional, fully-developed channel flow, J. Fluid Mech. 56, 533.
226. Jones, W. P., 1971, Laminarization in strongly accelerated boundary layers, PhD Thesis, Faculty of Engineering, University of London.
227. Jones, W. P. and Launder, B. E., 1972a, The prediction of laminarization with a two-equation model of turbulence, Int. J. Heat Mass Transfer 15, 301-314.
228. Jones, W. P. and Launder, B. E., 1972b, Some properties of sink flow turbulent boundary layers, J. Fluid Mech. 56, 337-351.
229. Jones, W. P. and Manners, A., 1989, The calculation of the flow through a two-dimensional faired diffuser, in Turbulent Shear Flows 6 (Ed. J. C. Andre et al.), 18-31, Springer Verlag, Heidelberg.
230. Jones, W. P. and Musonge, P., 1988, Closure of the Reynolds stress and scalar flux equation, Phys. Fluids 31, 3589-3604.
231. Jovanovic, J., 2004, The Statistical Dynamics of Turbulence, Springer.
232. Jovanovic, J., Ye, Q. Y. and Durst, F., 1995, Statistical interpretation of the turbulent dissipation rate in wall-bounded flows, J. Fluid Mech. 293, 321-347.
233. Jovic, S. and Driver, D. M., 1994, Backward-facing step measurements at low Reynolds number, ReH = 5000, NASA Report TM 108807.
234. Kader, B. A., 1981, Temperature and concentration profiles in fully turbulent boundary layers, Int. J. Heat Mass Transfer 24, 1541-1544.
235. Kasagi, N. and Matsunaga, A., 1995, Three-dimensional particle-tracking velocimetry of turbulence statistics and energy budget in a backward-facing step flow, Int. J. Heat Fluid Flow 16,477-485.
236. Kato, M. and Launder, B. E., 1993, The modelling of turbulent flow around stationary and vibrating square cylinders, Paper 10.4, Proc. 9th Symp. on Turbulent Shear Flows, Kyoto, Japan.
237. Kawamura, H., Sasaki, J. and Kobayashi, K., 1995, Budget and modelling of triple-moment velocity correlations in a turbulent channel flow based on DNS, Proc. 10th Symp. on Turbulent Shear Flows, Pennsylvania State University, PA.
238. Kays, W. M. and Moffat, R. J., 1975, The behaviour of transpired turbulent boundary layers, in Studies in Convection 1 (Ed. B. E. Launder), 223-319, Academic Press, London.
239. Kays, W. M., Crawford, M. E. and Weigand, G., 2004, Convective Heat and Mass Transfer, McGraw Hill, New York.
240. Kebede, W., Launder, B. E. and Younis, B. A., 1985, Large-amplitude periodic pipe flow: a second-moment closure study, 16.23-16.28, Proc. 5th Symp. on Turbulent Shear Flows, Cornell University, Ithaca, NY.
241. Kenjereš, S., 1999, Numerical modelling of complex buoyancy-driven flows, PhD Thesis, Delft University of Technology, Delft.
242. Kenjereš, S. and Hanjaliű, K., 1996, Prediction of turbulent thermal convection in concentric and eccentric horizontal annuli, Int. J. Heat Fluid Flow 15, 430-439.
243. Kenjereš, K. and Hanjaliű, K., 1999, Transient analysis of Rayleigh-Benard convection with a RANS model, Int. J. Heat Fluid Flow 20, 329-340.
244. Kenjereš, S. and Hanjaliű, K., 2000a, Convective rolls and heat transfer in finite-length Rayleigh-Benard convection: a two-dimensional numerical study, Phys. Rev. E 62, 1-12.
245. Kenjereš, S. and Hanjaliű, K., 2000b, On the implementation of effects of Lorentz force in turbulence closure models, Int. J. Heat Fluid Flow 21, 329-337.
246. Kenjereš, S. and Hanjaliű, K., 2002a, Simulation of coherent eddy structures in buoyantly driven flows, in Closure Strategies for Turbulent and Transitional flows (Ed. B. E. Launder and N. D. Sandham), Chapter 22, 659-684, Cambridge University Press, Cambridge.
247. Kenjereš, K. and Hanjaliű, K., 2002b, Combined effects of terrain orography and thermal stratification on pollutant dispersion in a town valley: a T-RANS simulation, J. Turbulence 3, 1-21, http://jot.iop.org/S1468-5248(02)3599-1 (electronic publication).
248. Kenjereš, S. and Hanjaliű, K., 2004, Numerical simulation of magnetic control of heat transfer in thermal convection, Int. J. Heat Fluid Flow 25, 559-568.
249. Kenjereš, K. and Hanjaliű, K., 2006, LES, T-RANS and hybrid simulations of thermal convection at high Ra numbers, Int. J. Heat Fluid Flow 27, 800-810.
250. Kenjereš, S. and Hanjaliű, K., 2007, Numerical insight into magnetic dynamo action in a turbulent regime, New J. Phys. 9, 1-29.
251. Kenjereš, K. and Hanjaliű, K., 2009, Tackling complex turbulent flows with transient RANS, Fluid Dyn. Res. 41, 1-32.
252. Kenjereš, S., Gunarjo, S. B. and Hanjaliű, K., 2005, Contribution to elliptic relaxation modelling of turbulent natural and mixed convection, Int. J. Heat Fluid Flow 26, 569-586.
253. Kenjereš, K., Hanjaliű, K. and Gunarjo, S. B., 2002, A T-RANS/VLES approach to indoor climate simulations, FEDSM2002-31400, Proc. ASME FEDSM’02, Montreal, Canada, 9 pages.
254. Kenjereš, S., Hanjaliű, K. and Bal, D., 2004, A direct-numerical-simulation-based second-moment closure for turbulent magnetohydrodynamic flows, Phys. Fluids 16, 1229-1241.
255. Kenjereš, S., Hanjaliű, K. and Renaudier, S., 2006, Coupled fluid-flow and magnetic-field simulation of the Riga dynamo experiment, Phys. Plasma 13, 1-13.
256. Kidger, J. W., 1999, Turbulence modelling for stably stratified flows andfree-surface jets, PhD Thesis, Dept. Mechanical, Aeronautical & Manufacturing Engineering, UMIST, Manchester, UK.
257. Kim, J., 1989, Personal communication.
258. Kim, J., Moin, P. and Moser, R. D., 1987, Turbulence statistics in fully-developed channel flow at low Reynolds number, J. Fluid Mech. 177, 133.
259. Kim, K. R., Cotton, M. A., Craft, T. J. and Heynes, O. R., 2008, On the dynamics and frequency response of fully-pulsed turbulent round jets: computations using two-time-scale/strain sensitized eddy viscosity models, Int. J. Heat Fluid Flow 29, 1650-1669.
260. Kitoh, O., 1991, Experimental study of turbulent swirling flow in a straight pipe, J. Fluid. Mech. 225,445-479.
261. Kline, S. J., Reynolds, W. C., Schraub, F. A. and Runstadler, P. W., 1967, The structure of turbulent boundary layers, J. Fluid Mech. 30, 741-773.
262. Kline, S. J., Morkovin, M. V., Sovran, G. and Cockrell, D. J., 1969, Proc. Computation of Turbulent Boundary Layers, AFOSR-IFP-Stanford Conference, Stanford University, Stanford, CA.
263. Kline, S. J., Cantwell, B. J. and Lilley, G. M., 1981, Proc. AFOSR-HTTM-Stanford Conf. on Complex Turbulent Flows: Comparison of computations and experiments, Vol. 1, Objectives, Evaluation of Data, Specification of Test Cases, Thermosciences Division, Stanford University, Stanford, CA.
264. Kline, S. J., Cantwell, B. J. and Lilley, G. M., 1982, Proc. AFOSR-HTTM-Stanford Conf. on Complex Turbulent Flows: Comparison of computations and experiments, Vol. 2, Taxonomies, Reporters’ Summaries Evaluation and Conclusions, Thermosciences Division, Stanford University, Stanford, CA.
265. Kolmogorov, A. N., 1941, The local structure of turbulence in an incompressible viscous fluid for very large Reynolds numbers, Dokl. Akad. Nauk SSSR 30, 299-303.
266. Kolmogorov, A. N., 1942, Equations of motion of an incompressible fluid, Dokl. Akad. Nauk SSSR 30, 299-303.
267. Kolovandin, B. A. and Vatutin, I. A., 1972, On the statistical theory of non-uniform turbulence, Int. J. Heat Mass Transfer 15, 2371-2383.
268. Kovasznay, L. S. G. and Ali, S. F., 1974, Structure of turbulence in the wake of a heated flat plate, Proc. 5th Int. Heat Transfer Conf., Tokyo, Japan, 99-103.
269. Kraichnan, R. H., 1962, Turbulent thermal convection at arbitrary Prandtl number, Phys. Fluids 5, 1374-1389.
270. Kristoffersen, R. and Andersson, H., 1993, Direct simulations of low-Reynolds-number turbulent flow in a rotating channel, J. Fluid Mech. 256, 163-197.
271. Lai, Y. G. and So, R. M. C., 1990, On near-wall turbulent flow modelling, J. Fluid Mech. 221, 641-673.
272. Lam, C. K. G. and Bremhorst, K. A., 1981, Modified form of the k-e model for predicting wall turbulence, J. Fluids Eng. 103,456-460.
273. Lamballais, O., Metais, O. and Lesieur, M., 1998, Spectral dynamic model for large-eddy simulations of turbulent rotating channel flow, Theor. Comput. Fluid Dyn. 12, 149-177.
274. Launder, B. E., 1964a, Laminarization of the turbulent boundary layer in a severe acceleration, ASMEJ. Appl. Mech. 31, 707-709.
275. Launder, B. E., 1964b, Laminarization of the turbulent boundary layer by acceleration, Gas Turbine Lab Report #77 (also Sc.D. Thesis, 1965), Massachusetts Institute of Technology, Cambridge, MA.
276. Launder, B. E., 1973, Scalar property transport by turbulence, Rep. HTS/73/26, Mechanical Eng. Dept., Imperial College, London.
277. Launder, B. E., 1975a, On the effects of a gravitational field on the turbulent transport of heat and momentum, J. Fluid Mech. 67, 569-581.
278. Launder, B. E., 1975b, Progress in the modelling of turbulent transport, in Prediction Methods for Turbulent Flow, Lecture Series 76, Von Karman Institute, Rhode St Genèse, Belgium.
279. Launder, B. E., 1976, Heat and mass transport, Chapter 6 in Topics in Applied Physics: Turbulence (Ed. P. Bradshaw), Vol. 12, Springer Verlag, Berlin.
280. Launder, B. E., 1982, A generalized algebraic stress transport hypothesis, AIAA J. 20, 436-437.
281. Launder, B. E., 1986, Low-Reynolds-number turbulence near walls, Rept.TFD/86/4, Mechanical Engineering Department, UMIST, Manchester, UK.
282. Launder, B. E., 1988, On the computation of convective heat transfer in complex turbulent flows, ASME J. Heat Trans. 110, 1112-1128.
283. Launder, B. E., 1989, Second-moment closure: present… and future?, Int. J. Heat Fluid Flow 10, 282-300.
284. Launder, B. E., 1993, An introduction to single-point closure methodology, in Les Houches Summer School-59 on Computational Fluid Dynamics (Ed. M. Lesieur, P. Comte and J. Zinn-Justin), 257-325, Elsevier Science, Oxford.
285. Launder, B. E., 1996, An introduction to single-point closure methodology, in Les Houches, Session LIX,1993, Mécanique des Fluides Numérique/Computational Fluid Mechanics (Ed. M. Lesieur, P. Comte and J. Zinn-Justin) p. 315, Elsevier Science, Amsterdam.
286. Launder, B. E., 2005, RANS modelling of turbulent flows affected by buoyancy or stratification, in Prediction of Turbulent Flows (Ed. G. F. Hewitt and J. C. Vassilicos), 50-127, Cambridge University Press, Cambridge.
287. Launder, B. E. and Jones, W. P., 1969, Sink flow turbulent boundary layers, J. Fluid Mech. 38, 817-831.
288. Launder, B. E. and Li, S-P., 1994, On the elimination of wall-topography parameters from second-moment closure, Phys. Fluids 6, 999-1006.
289. Launder, B. E. and Morse, A. P., 1979, Numerical prediction of axisymmetric free shear flows with a Reynolds stress closure, in Turbulent Shear Flows 1 (Ed. F. Durst et al.), 279-294, Springer Verlag, Heidelberg.
290. Launder, B. E. and Reynolds, W. C., 1983, Asymptotic near-wall stress dissipation rates in a turbulent flow, Phys. Fluids 26, 1157-1158.
291. Launder, B. E. and Samaraweera, D. S. A., 1979, Application of a second-moment turbulence closure to heat and mass transport in thin shear flows - 1. Two-dimensional transport, Int. J. Heat Mass Transfer 22, 1631-1643.
292. Launder, B. and Sandham, N. (Editors), 2002, Closure Strategies for Turbulent and Transitional Flows, Cambridge University Press, Cambridge.
293. Launder, B. E. and Sharma, B. I., 1974, Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc, Lett. in Heat Mass Transfer 1, 131-138.
294. Launder, B. E. and Shima, N., 1989, Second-moment closure for the near-wall sublayer: development and application, AIAA J. 27, 1319-1325.
295. Launder, B. E. and Spalding, D. B., 1972, Mathematical Models of Turbulence, Academic Press, London.
296. Launder, B. E. and Spalding, D. B., 1974, The numerical computation of turbulent flows, Comput. Meth. Appl. Mech. Eng. 3, 269-289.
297. Launder, B. E. and Tselepidakis, D. P., 1993, Contribution to the modelling of nearwall turbulence, in Turbulent Shear Flows 8 (Ed. F. Durst et al.), 81-96, Springer, Berlin.
298. Launder, B. E. and Tselepidakis, D. P., 1994, Application of a new second-moment closure to turbulent channel flow rotating in orthogonal mode, Int. J. Heat Fluid Flow 15, 2-10.
299. Launder, B. E., Morse, A., Rodi, W. and Spalding, D. B., 1973, Prediction of free shear flows: a comparison of the performance of six turbulence models, Free Turbulent Shear Flows, Vol. 1, Conference Proceedings, NASA SP-321, 321-426, Langley Research Center, Hampton, VA.
300. Launder, B. E., Poncet, S. and Serre, E., 2010, Laminar, transitional and turbulent flow in rotating disk cavities, Annu. Rev. FluidMech. 42, 229-248.
301. Launder, B. E., Priddin, C. H. and Sharma, B. I., 1977, The calculation of turbulent boundary layer on spinning and curved surfaces, J. Fluids Eng. 99, 231-239.
302. Launder, B. E., Reece, G. J. and Rodi, W., 1975, Progress in the development of a Reynolds stress turbulence closure, J. Fluid Mech. 68, 537-566.
303. Launder, B. E., Tselepidakis, D. P. and Younis, B. A., 1987, A second-moment study of rotating channel flow, J. Fluid Mech. 183, 63-75.
304. Laurence, D. R., Uribe, J. C. and Utyuzhnikov, S. V., 2004, A robust formulation of the n2-1 model, Flow, Turbulence Combust. 73, 169-185.
305. Le, H., Moin, P. and Kim, J., 1997, Direct numerical simulation of flow over a backward facing step, J. Fluid Mech. 330, 349-374.
306. Lee, D. H., 1984, Measurement of the turbulent transport downstream of an abrupt expansion in a circular duct with a constant wall temperature, MS Thesis, Mech. Eng. Dept., University of California, Davis, CA.
307. Lee, D. and Chou, H., 2001, Magnetohydrodynamic turbulent flow in a channel at low magnetic Reynolds number, J. Fluid Mech. 439, 367-394.
308. Lee, M. J. and Reynolds, W. C., 1985, Numerical experiment on the structure of homogeneous turbulence, Stanford University Tech. Rep., TF-24, Stanford, CA.
309. Lee, M. J., Kim, J. and Moin, P., 1990, Structure of turbulence at high shear rate, J. Fluid Mech. 216, 561-583.
310. Lenshaw, D. H, Wyngaard, J. C. and Pennell, W. T., 1980, Mean-field and second-moment budgets in a baroclinic, convective boundary layer, J. Atmos. Sci. 37, 1313-1326.
311. Leschziner, M. A. and Lien, F-S., 2002, Numerical aspects of applying second-moment closures to complex flows, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 5, 153-187, Cambridge University Press, Cambridge.
312. Leschziner, M. A. and Rodi, W., 1981, Calculation of annular and twin parallel jets using various discretization schemes and turbulence model variations, ASME J. Fluids Eng. 103, 352-360.
313. Leslie, D. C., 1973, Developments in the Theory of Turbulence, Clarendon Press, Oxford.
314. Levchenya, A. M., Smirnov, E. M. and Goryachev, V. D., 2010, RANS-based numerical simulation and visualization of the horseshoe vortex system in the leading-edge endwall region of a symmetric body, Int. J. Heat Fluid Flow 31, 1107-1112.
315. Li, S.-P., 1992, Predicting riblet performance with engineering turbulence models, PhD Thesis, Faculty of Technology, University of Manchester.
316. Liakopoulos, A., 1984, Explicit representations of the complete velocity profile in a turbulent boundary layer, AIAA J. 22, 844-846.
317. Libby, P. A., 1975, Prediction of intermittent turbulent flows, J. Fluid Mech. 68 273-295.
318. Lien, F-S., and Kalitzin, G., 2001, Computations of transonic flow with the n2-1 turbulence model, Int. J. Heat Fluid Flow 22, 53-61.
319. Lien, F. S., Kalitzin, G. and Durbin, P. A., 1998, RANS modelling for compressible and transitional flows, CTR Proc. Summer Program, Stanford, CA, 267-286.
320. Lin, A. and Wolfshtein, M., 1979, Theoretical study of the Reynolds stress equations, in Turbulent Shear Flows 1 (Ed. F. J. Durst et al.), 327-343, Springer Verlag, Heidelberg.
321. Lin, S. C. and Lin, S. C., 1973, Study of strong temperature mixing in subsonic gridgenerated turbulence, Phys. Fluids 16, 1587-1598.
322. Lumley, J. L., 1967, Similarity and the turbulent energy spectrum, Phys. Fluids 10, 855-858.
323. Lumley, J. L., 1975a, Introduction, in Prediction Methods for Turbulent Flow, Lecture Series 76, Von Karman Institute for Fluid Dynamics, Rhode-St-Genese, Belgium.
324. Lumley, J. L., 1975b, Pressure-strain correlation, Phys. Fluids 18, 750.
325. Lumley, J. L., 1978, Computational modeling of turbulent flows, Adv. Appl. Mech. 18, 123-176.
326. Lumley, J. L. and Khajeh-Nouri, B., 1973, Modeling homogeneous deformation of turbulence, Sibley School of Mechanical and Aerospace Engineering, Cornell University, Ithaca, NY.
327. Lumley, J. L. and Khajeh Nouri, B., 1974, Computational modeling of turbulent transport, Proc. 2ndIUGG-IUTAM Symp. on Atmos. Diffusion & Env. Pollution, Academic Press, London.
328. Lumley, J. L. and Newman, G. R., 1977, The return to isotropy of homogeneous turbulence, J. Fluid Mech. 82, 162-178.
329. Lykoudis, P. S. and Brouillette, E. C., 1967, Magneto-fluid-mechanic channel flow. II. Theory, Phys. Fluids 10, 1002-1007.
330. Magnaudet, J., 1992, The modelling of inhomogeneous turbulence in the absence of mean velocity gradients, 4th Eur. Turbulence Conf., Delft, The Netherlands.
331. Malecki, P., 1994, Etude de modèles de turbulence pour les couches limites tridimen-sionelles, PhD Thesis, ONERA-CERT, Toulouse, France.
332. Manceau, R., 2005, An improved version of the elliptic blending model application to nonrotating and rotating channel flows, in Proc. 4th Int. Symp. on Turbulence & Shear Flow Phenomena, Williamsburg, VA, USA (Ed. J. A. C. Humphrey et al.), 259-264.
333. Manceau, R. and Hanjaliű, K., 2000, A new form of the elliptic relaxation equation to account for wall effects in RANS modelling, Phys. Fluids 12, 2345-2351.
334. Manceau, R., and Hanjaliű, K., 2002, The elliptic blending model: a new near-wall Reynolds-stress closure, Phys. Fluids 14, 744-754.
335. Manceau, R., Wang, M. and Laurence, D., 2001, Inhomogeneity and anisotropy effects on the redistribution term in RANS modelling, J. Fluid Mech. 438, 307-338.
336. Mansour, N. N., Kim, J. and Moin, P., 1988, Reynolds-stress and dissipation-rate budgets in a turbulent channel flow, J. Fluid Mech. 194, 15-44.
337. Mathieu, J. and Jeandel, D., 1984, Vol. 1: Turbulence et approche spectrale, 1-213 in Turbulence Models and their Applications, Eyrolles, Paris.
338. McGuirk, J. J. and Papadimitriou, C., 1988, Stably stratified free-surface shear layers with internal hydraulic jumps, in Stably Stratified Flows and Dense Gas Dispersion (Ed. J. S. Puttock), 385-407, IMA Conference Series, Oxford University Press, Oxford.
339. Medic, G. D. and Durbin, P., 2002, Towards improved heat transfer on turbine blades, J. Turbomachinery 124, 187-192.
340. Mellor, G. L., 1973, Analytical prediction of the properties of stratified planetary surface layers, J. Atmos. Sci. 30, 1061-1069.
341. Mellor, G. L. and Herring, H. J., 1973, A survey of the mean turbulent field closure models, AIAA J. 11, 590-599.
342. Mellor, G. and Yamada, T., 1974, A hierarchy of turbulence closure models for planetary boundary layers, J. Atmos. Sci. 31, 1791-1806.
343. Menter, F. R., 1994, Two-equation eddy-viscosity turbulence models for engineering applications, AIAA J. 32, 1598-1605.
344. Menter, F. R., 2003, Zonal two-equation k-rn turbulence model for aerodynamic flows, AIAA Paper No. 1993-2906.
345. Menter, F. and Egorov, Y., 2010, Scale-adaptive simulation method for unsteady turbulent flows predictions, Pt 1: Theory and model description, Flow, Turbulence Combust. 85, 113-138.
346. Menter, F. R., Langtry, R. and Kuntz, M., 2003, Ten years of industrial experience with the SST turbulence model, in Turbulence Heat and Mass Transfer 4 (Ed. K. Hanjaliű, Y. Nagano and M. Tummers), 625-632, Begell House, New York.
347. Millionshtchikov, M. D., 1941, On the theory of homogeneous isotropic turbulence, C. R. Acad. Sci. SSSR 32, 615-619.
348. Moin, P. and Kim, J., 1982, Numerical investigation of turbulent channel flow, J. Fluid Mech. 118, 341-377.
349. Monin, A. S., 1965, On the symmetry of turbulence in the surface layer of air, Izv. Atm. Oceanic Phys. 1, 45.
350. Monin, A. S. and Yaglom, A. M., 1975, Statistical Fluid Mechanics, Vol. 2, MIT Press, Cambridge, MA.
351. Moreau, R., 1990, Magnetohydrodynamics (translated from French), Kluwer Academic Publishers, Dordrecht.
352. Moretti, P. M. and Kays, W. M., 1965, Heat transfer to a turbulent boundary layer with varying surface temperature - an experimental study, Int. J. Heat Mass Transfer 8, 1187-1202.
353. Morse, A. P., 1980, Axisymmetric free shear flows with and without swirl, PhD Thesis, Faculty of Engineering, University of London.
354. Moser, D., Kim, J. and Mansour, N. N., 1999, Direct numerical simulation of turbulent channel flow up to ReT = 590, Phys. Fluids 11, 943-945.
355. Musker, A. J., 1979, Explicit expression for the smooth wall velocity distribution in a turbulent boundary layer, AIAA J. 17, 655-657.
356. Myong, H. K and Kasagi, N., 1990, Prediction of anisotropy of the near wall turbulence with an anisotropic low-Reynolds-number model of turbulence, J. Fluids Eng. 112, 521-524.
357. Nagano, Y., 2002, Modelling heat transfer in near-wall flows, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 6, 188-247, Cambridge University Press, Cambridge.
358. Nagano, Y. and Tagawa, M., 1991, Turbulence model for triple velocity and scalar correlations, in Turbulent Shear Flows 7 (Ed. F. Durst et al.), 47-62, Springer, Berlin.
359. Nagano, Y., Tagawa, M. and Tsuji, T., 1993, Effects of adverse pressure gradients on mean flows and turbulence statistics in a boundary layer, Turbulent Shear Flows 8 (Ed. F. Durst et al.), 7-21, Springer, Berlin.
360. Nagano, Y., Tsuji, T. and Houra, T., 1993, Structure of turbulent boundary layer subjected to adverse pressure gradient, Int. J. Heat Fluid Flow 19, 563-572.
361. Naot, D., 1994, Response of shear flow turbulence to diffusional electromagnetic fluctuations: transverse magnet, Appl. Math. Modelling 18, 23-31.
362. Naot, D. and Rodi, W., 1982a, Calculation of secondary currents in channel flow, J. Hydraulics 108, 948-968.
363. Naot, D. and Rodi, W., 1982b, Numerical simulation of secondary currents in channel flow, Trans. ASCEJ. Hydr. Div. 108, 948-968.
364. Naot, D., Shavit, A. and Wolfshtein, M., 1970, Interactions between components of the turbulent correlation tensor, Isr. J. Technol. 8, 259-269.
365. Naot, D., Shavit, A. and Wolfshtein, M., 1973, Two-point correlation model and the redistribution of Reynolds stress, Phys. Fluids 16, 738.
366. Naot, D., Peled, A. and Tanny, J., 1990, Response of shear flow turbulence to diffusional electromagnetic fluctuations, Appl. Math. Modelling 14, 226-236.
367. Nee, V. W. and Kovasznay, L. S. G., 1969, Simple phenomenological theory of turbulent shear flows, Phys. Fluids 12, 473-484.
368. Nejad, A. S., Favaloro, S. C., Vanka, S. P., Samimy, M. and Langenfeld, C., 1989, Application of laser velocimetry for characteristics of confined swirling flows, ASME J. Eng. Gas Turbines Power 111, 36-45.
369. Newman, B. G., Patel, R. P., Savage, S. B. and Tjio, H. K., 1972, Three-dimensional wall jet originating from a circular orifice, Aero. Q. 23, 693-698.
370. Newman, G. R., Launder, B. E. and Lumley, J. L., 1981, Modelling the behaviour of homogeneous scalar turbulence, J. Fluid Mech. 111, 217-232.
371. Ng, K. H. and Spalding, D. B., 1972, Turbulence model for boundary layers near walls, Phys. Fluids 15, 20-30.
372. Ng, E. Y. K., Tan, H. Y., Lim, H. N. and Choi, D., 2002, Near-wall function for turbulence closure models, Comput. Mech. 29, 178-181.
373. Nishibori, K., Kikuyama, K. and Murakami, M., 1987, Laminarization of turbulent flow in the inlet region of an axially rotating pipe, JSME Int. J. 30, 255-262.
374. Nisizimi, S. and Yoshizawa, A., 1987, Turbulent channel and Couette flows using an anisotropic k-e model, AIAA J. 25,414-420.
375. Noguchi, H., Ohtsubo, Y. and Kasagi, N., 1998, Personal communication, DNS database, ftp.thlab.t.u-tokyo.ac.jp.
376. Orlandi, P. and Fatica, M., 1997, Direct simulations of turbulent flow in a pipe rotating about its axis, J. Fluid Mech. 343, 43-72.
377. Page, F., Corcoran, W. H., Schlinger, W. G. and Sage, B. H., 1952, Temperature and velocity distributions in uniform flow between parallel plates, Ind. Eng’g. Chem. 44,419-424.
378. Panchapakesan, N. R. and Lumley, J. L., 1993, Turbulence measurements in axisymmetric jets of air and helium; Part 1: Air jets, J. Fluid Mech. 246, 197-223.
379. Patankar, S. V. and Spalding, D. B., 1967, Heat and Mass Transfer in Boundary Layers, Morgan-Grampian Press, London.
380. Patankar, S. V. and Spalding, D. B., 1970, Heat and Mass Transfer in Boundary Layers, 2nd edition, International Textbook Co., London.
381. Patel, V. C. and Head, M. R., 1969, Some observations on skin friction and velocity profiles in fully-developed pipe and channel flows, J. Fluid Mech. 38, 161-201.
382. Patel, V. C., Rodi, W. and Scheuerer, G., 1985, Turbulence models for near-wall and low Reynolds number flows, AIAA J. 23, 1308-1319.
383. Perkins, K. R. and McEligot, D. M., 1975, Mean temperature profiles in heated laminarizing air flows, ASME J. Heat Transfer 97, 589-593.
384. Perot, B. and Moin, P., 1995, Shear-free turbulent boundary layers, J. Fluid Mech. 295, 199-245.
385. Pettersson Reif, B. A., 2006, Towards a nonlinear eddy-viscosity model based on elliptic relaxation, Flow, Turbulence Combust. 76, 241-256.
386. Piquet, J., 1999, Turbulent Flows, Springer, Berlin.
387. Pope, S. B., 1975, A more general effective viscosity hypothesis, J. Fluid Mech. 72, 331-340.
388. Pope, S. B., 1978, An explanation of theround-jet/plane-jet anomaly, AIAA J. 16,279-281.
389. Pope, S. B., 1983, Consistent modelling of scalars in turbulent flows, Phys. Fluids 26,404.
390. Pope, S. B., 2000, Turbulent Flows, Cambridge University Press, Cambridge.
391. Popovac, M., 2006, Modelling and simulation of turbulence and heat transfer in wall-bounded flows, PhD Thesis, Delft University of Technology, Delft, The Netherlands.
392. Popovac, M. and Hanjaliű, K., 2005, Compound wall treatment for RANS computations of complex turbulent flows and heat transfer, in Proc. 3rd MIT Conf. on Computational Fluid and Solid Mechanics, June 14-17, 2005, Cambridge, MA (Ed. K. Bathe), Vol. 1, 702-706, Elsevier. (See also Flow, Turbulence Combust. 78, 177-202, 2007).
393. Praisner, T. J. and Smith, C. R., 2006a, The dynamics of the horseshoe vortex and the associated end-wall heat transfer - 1. Temporal behaviour, J. Turbomachinery 128, 747-754.
394. Praisner, T. J. and Smith, C. R., 2006b, The dynamics of the horseshoe vortex and the associated end-wall heat transfer - 2. Time-mean results, J. Turbomachinery 128, 755-762.
395. Prud’homme, M. and Elghobashi, S., 1986, Turbulent heat transfer near the reattachment point of flow downstream from a sudden pipe expansion, Num. Heat Trans. 10, 349-368.
396. Reeuwijk, Van M., Jonker, H. J. J. and Hanjaliű, K., 2005, Identification of the wind in Rayleigh-Benard convection, Phys. Fluids 17, 1-4.
397. Reeuwijk, van M., Jonker, H. J. J. and Hanjaliű, K., 2008, Wind and boundary layers in Rayleigh-Benard convection. Pt. I. Analysis and modeling, Phys. Rev. E, 77, 0363111-15.
398. Reichardt, H., 1951, Vollstaendige Darstellung der turbulenten Geschwindigkeitsverteilung in glatten Leitungen, ZAMM 31, 208-219.
399. Reynolds, O., 1895, On the dynamical theory of incompressible viscous fluids and the determination of the criterion, Philos. Trans. R. Soc. London 186, 123-164.
400. Reynolds, W. C., 1984, Physical and analytical foundations, concepts and new directions in turbulence modelling and simulation, in Turbulence Models and their Applications, Vol. 2, 149-294, Collection de la Direction des Etudes et Recherches d’Electricite de France, Eyrolles, Paris.
401. Reynolds, W. C. and Hussain, A. K. M. F., 1972, The mechanics of an organised wave in turbulent shear flow. Part 3: Theoretical models and comparisons with experiments, J. FluidMech. 54, 263-288.
402. Richardson, L. F., 1926, Atmospheric diffusion shown on a distance-neighbour graph, Proc. R. Soc. London A110, 709.
403. Ristorcelli, J. R., Lumley, J. L. and Abid, R., 1995, A rapid pressure covariance representation consistent with the Taylor-Proudman theorem, materially frame indifferent in the two-component limit, J. Fluid Mech. 292, 111-152.
404. Rodi, W., 1972, The prediction of free turbulent boundary layers by use of a two-equation model of turbulence, PhD Thesis, University of London.
405. Rodi, W., 1975, A review of experimental data of uniform-density, free turbulent boundary layers, in Studies in Convection (Ed. B. E. Launder), Vol. 1, 79-165, Academic Press, London.
406. Rodi, W., 1976, A new algebraic stress relation for calculating Reynolds stresses, ZAMM 56, T219-T221.
407. Rodi, W. and Scheuerer, G., 1983, Calculation of curved shear layer with 2-equation turbulence models, Phys. Fluids 26, 1422-1436.
408. Rodi, W. and Scheuerer, G., 1986, Scrutinizing the k-e model under adverse pressure gradient conditions, J. Fluids Eng. 108, 174-179.
409. Rodi, W. and Spalding, D. B., 1970, A two-parameter model of turbulence and its application to free jets, Wärme Stoffübertragung 3, 85-95.
410. Rogers, M. M., Mansour, N. N. and Reynolds, W. C., 1989, An algebraic model for the turbulent flux of a passive scalar, J. Fluid Mech. 203, 77-101.
411. Rotta, J. C., 1951, Statistische Theorie nichthomogener Turbulenz, Z. Phys. 129, 547-572, 131, 51-77.
412. Rotta, J., 1968, Über eine Methode zur Berechnung turbulenter Scherstromungen, Aerodynamische Versuchanstalt, Gottingen, Rep 69 A 14.
413. Rubel, A., 1985, On the vortex-stretching modification of the k-e turbulence model: radial jets, AIAAJ. 23, 1129-1130.
414. Rubinstein, R. and Barton, J. M., 1990, Nonlinear Reynolds stress models and the renormalization group, Phys. Fluids A2, 1472-1476.
415. Saddoughi, S. G. and Veeravalli, S. V., 1994, Local isotropy in turbulent boundary layers at high Reynolds numbers, J. Fluid Mech. 268, 333-372.
416. Saffman, P. G., 1970, A model for inhomogeneous turbulent flow, Proc. R. Soc. London A317, 417-433.
417. Samuel, A. E. and Joubert, P. N., 1974, Boundary layer developing in an increasingly adverse pressure gradient, J. Fluid Mech. 66, 481-505.
418. Savill, A. M., 2002a, By-pass transition using conventional closures, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 17,464-492, Cambridge University Press, Cambridge.
419. Savill, A. M., 2002b, New strategies in modelling by-pass transition, in Closure Strategies for Turbulent and Transitional Flows (Ed. B. E. Launder and N. D. Sandham), Chapter 18, 493-521, Cambridge University Press, Cambridge.
420. Scheuerer, G., 1983, Entwicklung eines Verfahrens zur Berechnung zweidimensionaler Grenzschichten an Gasturbinenschauffeln, Dr Ing Thesis, University of Karlsruhe, Germany.
421. Schiestel, R., 1974, Sur un nouveau modele de turbulence appliqué aux transferts de quantité de mouvement et de chaleur, These Doct. Es Sciences Phys., Universite de Nancy-1, France.
422. Schiestel, R., 1987, Multiple-time-scale modeling of turbulent flows in one-point closures, Phys. Fluids 30, 722-731.
423. Schiestel, R., 2008, Modeling and Simulation of Turbulent Flows, ISTE-John Wiley, London.
424. Schiestel, R. and Dejoan, A., 2005, Towards a new partially integrated transport model for coarse grid and unsteady flow simulations, Theor. Comput. Fluid Dyn. 18, 443-468.
425. Schmidt, H. and Schumann, U., 1989, Coherent structure of the convective boundary layer derived from large-eddy simulations, J. Fluid Mech. 200, 511-562.
426. Schumann, U., 1976, Numerical simulation of the transition from three- to two-dimensional turbulence under a uniform magnetic field, J. Fluid Mech. 74, 31-58.
427. Schumann, U., 1977, Realizability of Reynolds-stress turbulence models, Phys. Fluids 20, 721-725.
428. Schwarz, W. R. and Bradshaw, P., 1994, Term-by-term tests of stress-transport turbulence models in a 3-dimensional boundary layer, Phys. Fluids 6, 986-998.
429. Shih, T-H. and Lumley, J. L., 1985, Modeling of pressure correlation terms in Reynolds stress and scalar flux equations, Rep FDA-85-3, Sibley School of Mechanical & Aerospace Engineering, Cornell University, Ithaca, NY.
430. Shih, T-H., Lumley, J. L. and Chen, J-Y., 1985, Second-order modelling of a passive scalar in a turbulent shear flow, Rep. FDA-85-15, Sibley School of Mechanical & Aerospace Engineering, Cornell University, Ithaca, NY.
431. Shih, T.-H., Lumley, J. L. and Chen, J-Y., 1990, Second-order modelling of a passive scalar in a turbulent shear flow, AIAA J. 28, 610-617.
432. Shih, T. H., Zhu, J. and Lumley, J. L., 1995, A new Reynolds stress algebraic equation, Comput. Meth. Appl. Mech. Eng. 125, 287-302.
433. Shih, T., Povinelli, L. and Liu, N., 2002, Application of generalised wall functions for complex turbulent flows, in Engineering Turbulence Modelling and Experiments 5 (Ed. W. Rodi and N. Fueyo), 177-186, Elsevier, Amsterdam.
434. Shima, N., 1993, Prediction of turbulent boundary layers with second-moment closure: Part 1. Effects of periodic pressure gradient, wall transpiration and free-stream turbulence, J. Fluids Eng. 115, 56-63.
435. Shimomura, Y., 1991, Large eddy simulation of magnetohydrodynamic turbulent channel flows under a uniform magnetic field, Phys. Fluids A 3, 30-98.
436. Shir, C. C., 1973, A preliminary numerical study of atmospheric turbulent flows in the idealized turbulent boundary layer, J. Atmos. Sci. 30, 1327-1339.
437. Simpson, R. L. and Wallace, D. B., 1975, Laminarescent turbulent boundary layers: experiments on sink flows, Project Squid Tech. Rep. SMU-1-PU, Thermal Science & Propulsion Center, Purdue Univ.
438. Simpson, R. L., Kays, W. M. and Moffat, R. J., 1967, The turbulent boundary layer on a porous plate: an experimental study of the fluid dynamics with injection and suction, Thermosciences Division Rep HMT-2, Stanford University, Stanford, CA.
439. Simpson, R. L., Moffat, R. and Kays, W. M., 1969, The turbulent boundary layer on a porous plate: experimental skin friction with variable injection and suction, Int. J. Heat Mass Transfer 12, 771-789.
440. Spalart, P. R., 1986, Numerical study of sink-flow boundary layers, J. Fluid Mech. 172, 307-328.
441. Spalart, P. R. and Allmaras, S. R., 1992, A one-equation turbulence model for aerodynamic flows, AIAA Paper 92-0439 (see also Recherche Aérospatiale 1, 5-21, 1994).
442. Spalart, P. R. and Strelets, M. K., 1997, Direct and Reynolds-averaged numerical simulations of a transitional shear bubble, Proc. 11th Int. Symp. on Turbulent Shear Flows, Univ. Joseph Fourier, Grenoble, France, 30.13-30.18.
443. Spalart, P. R. and Strelets, M. K., 2000, Mechanism of transition and heat transfer in a separation bubble, J. Fluid Mech. 403, 329-349.
444. Spalding, D. B., 1961, A single formula for the law of the wall, ASME J. Appl. Mech. 28, 444-458.
445. Spalding, D. B., 1967, Monograph on turbulent boundary layers, Imperial College, Mech. Eng. Dept. Rep. TWF/TN/33.
446. Spalding, D. B., 1971, Concentration fluctuations in around turbulent free jet, Chem. Eng. Sci. 26, 95-107.
447. Speziale, C., 1987a, On non-linear k-l and k-e models of turbulence, J. Fluid Mech. 178, 459-478.
448. Speziale, C. G., 1987b, On the decomposition of turbulent flow fields for the analysis of coherent structures, Acta Mech. 70, 243-250.
449. Speziale, C. G., 1991, Analytical methods for the development of Reynolds stress closures in turbulence, Annu. Rev. Fluid Mech. 23, 107-157.
450. Speziale, C. and Gatski, T. B., 1997, Analysis and modeling of anisotropies in the dissipation rate of turbulence, J. Fluid Mech. 344, 155-189.
451. Speziale, C. G., Sarkar, S. and Gatski, T. B., 1991, Modelling the pressure-strain correlation of turbulence: an invariant dynamical systems approach, J. Fluid Mech. 227, 245-272.
452. Stawiarski, K. and Hanjaliű, K., 2002, A two-scale second-moment one-point turbulence closure, in Engineering Turbulence Modelling and Measurements 5 (Ed. W. Rodi and N. Fueyo), 97-106, Elsevier Science, Amsterdam.
453. Stawiarski, K. and Hanjaliű, K., 2005, On physical constraints for multi-scale turbulence closure models, Prog. Comput. Fluid Dyn. 5, 120-135.
454. Steenberger, W., 1995, Turbulent pipe flow with swirl, PhD Thesis, TU Eindhoven, The Netherlands.
455. Stevens, S. J. and Fry, P., 1973, Measurements of the boundary-layer growth in annular diffusers, J. Aircraft 10, 73-80.
456. Suga, K., 1995, Development and application of a non-linear eddy viscosity model sensitized to stress and strain invariants, Ph.D Thesis, UMIST, Manchester.
457. Suga, K., 2001, Application of a TCL second-moment closure to turbulent duct flows, Proc. UEF Conf. on Turbulent Heat Transfer - 3, Anchorage, AL.
458. Suga, K., 2004a, Modeling the rapid part of the pressure-diffusion process in the Reynoldsstress transport equation, ASME J. Fluids Eng. 126, 634-641.
459. Suga, K., 2004b, Improvement of second-moment closure for turbulent obstacle flow and heat transfer, Int. J. Heat Fluid Flow 25, 776-784.
460. Suga, K. and Abe, K., 2000, Non-linear eddy viscosity modelling for turbulence and heat transfer near wall and shear-free boundaries, Int. J. Heat Fluid Flow 21, 37-48.
461. Suga, K., Nagaoka, M., Horinouchi, N., Abe, K. and Kondo, Y., 2001, Application of a three-equation cubic eddy viscosity model to 3-D turbulent flows by the unstructured grid method, Int. J. Heat Fluid Flow 22, 259-271.
462. Suga, K., Craft, T. J. and Iacovides, H., 2006, An analytical wall function for turbulent flow and heat transfer over rough walls, Int. J. Heat Fluid Flow 27, 852-866.
463. Tailland, A. and Mathieu, J., 1967, Jet parietal, J. Mécanique 6, 103-131.
464. Tanahashi, M., Kang, S.-J., Miyamoto, S., Shiokawa, S. and Miyauchi, T., 2004, Scaling law of fine scale eddies in turbulent channel flows up to ReT = 800, Int. J. Heat Fluid Flow 25, 331-340.
465. Tatschl, R., Basara, B., Schneider, J., Hanjaliű, K., Popovac, M., Brohmer, A. and Mehring, J., 2006, Advanced turbulent heat transfer modeling for IC-engine applications using AVL FIRE, in International Multidimensional Engine Modelling, User’s Group Meeting, Detroit, MI, 2 April 2006.
466. Tatsumi, K., Iwai, H., Neo, E. C., Inaoka, K. and Suzuki, K., 1999, Prediction of time-mean characteristics and periodical fluctuation of velocity and thermal fields of a backwardfacing step, 1167-1172, Proc. 1st Int. Symp. on Turbulence & Shear Flows-1 (Ed. S. Banerjee and J. K. Eaton), Begell House, New York.
467. Taulbee, D., 1992, An improved algebraic Reynolds stress model and corresponding nonlinear stress model, Phys. Fluids A4, 2555-2561.
468. Taulbee, D. and Tran, L., 1988, Stagnation streamline turbulence, AIAA J. 26, 1011-1013.
469. Tavoularis, S. and Corrsin, S. C., 1981, Experiments in nearly homogeneous turbulent shear flow with a uniform mean temperature gradient: Part 1, J. Fluid Mech. 104, 311-347.
470. Tavoularis, S. and Corrsin, S. C., 1985, Effects of shear on the turbulent diffusivity tensor, Int. J. Heat Mass Transfer 28, 265-276.
471. Taylor, A. M. K., Whitelaw, J. H. and Yianneskis, M. J., 1982, Curved ducts with strong secondary motion - velocity measurements of developing laminar and turbulent flow, J. Fluids Eng. 104, 350-359.
472. Taylor, G. I., 1935, Statistical theory of turbulence, Parts I-III, Proc. R. Soc. London 151A, 421-464.
473. Tennekes, H. and Lumley, J. L., 1972, A First Course in Turbulence, MIT Press, Cambridge, MA.
474. Thielen, L., Hanjaliű, K. and Jonker, H., 2003, Symmetry breaking of flow and heat transfer in multiple impinging jets, Int. J. Heat Fluid Flow 24,444-457.
475. Thielen, L., Hanjaliű, K., Jonker, H. and Manceau, R., 2005, Predictions of flow and heat transfer in multiple impinging jets with an elliptic-blending second-moment closure, Int. J. Heat Mass Transfer 48, 1583-1598.
476. Thomas, T. G. and Takhar, H. S., 1988, Frame invariance of turbulence constitutive relations, Astrophys. Space Sci. 141, 159-168.
477. Townsend, A. A., 1956, The Structure of Turbulent Shear Flow, Cambridge University Press, Cambridge.
478. Tucker, H. J. and Reynolds, A. J., 1968, The distortion of turbulence by irrotational plane strain, J. Fluid Mech. 32, 657-673.
479. Uberoi, M. S., 1957, Equipartition of energy and local isotropy in turbulent flows, J. Appl. Phys. 28, 1165-1170.
480. Uittenbogaard, R., 1988, Measurement of turbulence fluxes in a steady, stratified mixing layer, 3rd Int. Symp. on Refined Flow Modelling & Turbulence Measurements, 725-732, Tokyo, Japan.
481. Van Driest, E. R., 1956, On turbulent flow near a wall, J. Aero. Sci. 23, 1007-1011.
482. Versteegh, T. A. M. and Nieuwstadt, F. T. M., 1998, Turbulent budgets of natural convection in an infinite, differentially heated vertical channel, Int. J. Heat Fluid Flow 19, 135-149.
483. Vogel, J. C. and Eaton, J. K., 1985, Combined heat transfer and fluid dynamic measurements downstream of a backward-facing step, ASME J. Heat Transfer 107, 922-929.
484. Wallin, S. and Johansson, A. V., 2000, An explicit algebraic Reynolds stress model for incompressible and compressible turbulent flows, J. Fluid Mech. 403, 89-132.
485. Warhaft, Z., 2000, Passive scalars in turbulent flow, Annu. Rev. Fluid Mech. 32, 203-240.
486. Warhaft, Z. and Lumley, J. L., 1978, An experimental study of the decay of temperature fluctuations in grid-generated turbulence, J. Fluid Mech. 88, 659-684.
487. Webster, C. A. G., 1964, An experimental study of turbulence in a density-stratified shear flow, J. Fluid Mech. 19, 221-245.
488. Wei, T. and Willmarth, W. W., 1989, Reynolds number effects on the structure of a turbulent channel flow, J. Fluid Mech. 204, 57-95.
489. Wieghardt, K., 1943, Uber die Wandschubspannung in turbulenten Reibungsschichten bei veranderlichem Aussendruck, Z.W.B., K.W.I., Gottingen, U & M. 6603.
490. Wilcox, D. C., 1988a, Reassessment of the scale determining equation for advanced turbulence models, AIAA J. 26, 1299-1310.
491. Wilcox, D. C., 1988b, Multiscale model of turbulent flows, AIAA J. 26, 1311-1320.
492. Wilcox, D. C., 1993, Comparison of two-equation turbulence models for boundary layers with pressure gradient, AIAA J. 31, 1414-1421.
493. Wilcox, D. C., 2000, Turbulence modeling for CFD, 2nd edition, DCW Industries, La Canada, CA.
494. Wilcox, D. C. and Rubesin, M. W., 1980, Progress in turbulence modelling for complex flow fields including effects of compressibility, NASA TP-1517.
495. Wizman, V., Laurence, D., Kanniche, M., Durbin, P. A. and Demuren, A., 1996, Modeling near-wall effects in second-moment closures by elliptic relaxation, Int. J. Heat Fluid Flow 17, 255-266.
496. Wolfram, 1988, MathematicaTM, Addison-Wesley.
497. Wolfshtein, M., 1969, The velocity and temperature distribution in one-dimensional flow with turbulence augmentation and pressure gradient, Int. J. Heat Mass Transfer 12, 301-318.
498. Wörner, M., 1994, Direkte Simulation turbulenter Rayleigh-Bénard Konvektion in flüssigem Natrium, Dissertation, University of Karlsruhe, KfK 5228, Kernforschungszentrum Karlsruhe, Germany.
499. Wörner, M. and Grotzbach, G., 1997, Pressure transport in DNS of turbulent natural convection in horizontal fluid layers, in Turbulence, Heat and Mass Transfer 2 (Ed. K. Hanjaliű and T. W. J. Peeters), 351-360, Delft University Press, Delft.
500. Wygnanski, I., Champagne, F. and Marasli, B., 1986, On the large-scale structures in two-dimensional, small-deficit turbulent wakes, J. Fluid Mech. 168, 31-71.
501. Wyngaard, J. C., Cote, O. R. and Izumi, Y., 1971, Local free convection, similarity, and the budgets of shear stress and heat flux, J. Atmos. Sci. 28, 1171-1182.
502. Yakhot, V. and Orszag, S. A., 1986, Renormalization group analysis of turbulence. 1. Basic theory, J. Sci. Comput. 1, 3-51.
503. Yakhot, V., Orszag, S. A., Thangam, S., Gatski, T. B. and Speziale, C. G., 1992, Development of turbulence models for shear flows by a double expansion technique, Phys. Fluids A 4, 1510-1520.
504. Yan, Y-J., Baughn, J. W. and Mesbah, M., 1992, The effect of Reynolds number on heat-transfer from a flat plate to an impinging jet, ASME Publ. HTD 226,1-7, ASME Winter Annual Meeting.
505. Yap, C. R., 1987, Turbulent heat and momentum transfer in recirculating and impinging flows, PhD Thesis, Faculty of Technology, University of Manchester, UK.
506. Younis, B. A., 1984, On modelling the effects of streamline curvature on turbulent shear flows, PhD Thesis, Faculty of Engineering, University of London, UK.
507. Zacharos, A., 2010, The use of unsteady RANS in the computation of 3-dimensional flow in rotating cavities, PhD Thesis, Faculty of Engineering and Physical Sciences, University of Manchester, UK.
508. Zeierman, S. and Wolfshtein, M., 1986, Turbulent time-scale for turbulent flow calculations, AIAAJ. 24, 1606-1610.
509. Zeman, O. and Lumley, J. L., 1976, Modeling buoyancy driven mixed layers, J. Atmos. Sci. 33 1974-1988.