RANS modelling of turbulent flows affected by buoyancy or stratification

Prediction of Turbulent Flows

Volumn , Issue , 2005, Pages 50-127

  Launder, B E ^a  

^a UNIVERSITY OF MANCHESTER   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84869078251     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9780511543227.003     Document Type: Chapter

References (132)

1. Abrahamsson, H., Johansson, B. and Lofdahl, L., 1997, ‘An investigation of the turbulence field in the fully developed three-dimensional wall-jet’, Int. Rep 97/1, Chalmers University of Technology, Sweden.
2. Addad, Y., Laurence, D. and Benhamadouche, S., 2003, ‘The negatively buoyant wall jet. Part 1: The LES database’, Fourth Int. Symp. on Turbulence, Heat & Mass Transfer, Antalya, Turkey.
3. Andre, J. C., De Moor, G., Lacarrere, L., Therry, G. and du Vachat, R., 1979, ‘The clipping approximation and inhomogeneous turbulence simulations’, in Turbulent Shear Flows 1 (eds. F. Durst, B. E. Launder, F. W. Schmidt and J. H. Whitelaw), pp. 307-318, Berlin, Springer Verlag.
4. el Baz, A., Craft, T. J., Ince, N. Z. and Launder, B. E., 1993, ‘On the adequacy of the thin-shear-flow equations for computing turbulent jets in stagnant surroundings’, Int. J. Heat Fluid Flow, 14, 164-169.
5. Bertoglio, J.-P., 1982, ‘Homogeneous turbulence within a rotating reference frame’, AIAA Journal, 20, 1175-1178.
6. Betts, P. L. and D’Affa Alla, 1986, ‘Turbulent buoyant air flow in a tall rectangular cavity’, ASME Heat Transfer Division, Volume HTD-60, pp. 83-91, ASME, Winter Annual Meeting.
7. Boris, J. P., Grinstein, F. F., Oran, E. S. and Kolbe, R. L., 1992, ‘New insights into large eddy simulation’, Fluid Dynamics Research, 10, 199-228.
8. Bradshaw, P., 1973, ‘Effects of streamline curvature in turbulent flow’, AGARDograph 196, NATO.
9. Cheah, S. C., Cheng, L., Cooper, D. and Launder, B. E., 1993, ‘On the structure of turbulent flow in spirally fluted tubes’, Proc. Fifth IAHR Conf. on Refined Flow Modelling and Turbulence Measurements, pp. 293-300, Paris, Presses Ponts et Chausees.
10. Chen, C. J. and Rodi, W., 1980, Turbulent Buoyant Jets - a Review of Experimental Data, HMT Series, Vol. 4, Oxford, Pergamon Press.
11. Chieng, C. C. and Launder, B. E., 1980, ‘On the calculation of turbulent heat transport downstream from an abrupt pipe expansion’, Numerical Heat Transfer, 3, 189-207.
12. Choi, Y. D., Iacovides, H. and Launder, B. E., 1989, ‘Numerical computation of turbulent flow in a square-sectioned 180-degree bend’, ASME J. Fluids Engineering, 111, 59-68.
13. Chou, P.-Y., 1945, ‘On velocity correlations and the solutions of the equations of turbulent fluctuation’, Quart. Appl. Math., 3, 38-54.
14. Cooper, D., Jackson, D. C., Launder, B. E. and Liao, G. X., 1993, ‘Impinging jet studies for turbulence model assessment. I. Flow-field experiments’, Int. J. Heat & Mass Transfer, 36, 2675-2684.
15. Cordier, H., 1999, ‘Simulation numerique de l’interaction en milieu confine d’un ecoulement de convection forcee avec un panache thermique’, Doctoral Thesis, Universite d’Aix-Marseille-II, Marseille.
16. Cotton, M. A. and Ismael, J. O., 1995, ‘Some results for homogeneous shear flows computed using a strain-parameter model of turbulence’, Proc. Tenth Symp. Turbulent Shear Flows, pp. 26.7-26.12, Pennsylvania State University.
17. Cotton, M. and Jackson, J. D., 1987, ‘Calculation of turbulent mixed convection using a low-Reynolds number k-e model’, Proc. Sixth Turbulent Shear Flow Symposium, Paper 9-6, Toulouse.
18. Craft, T. J., 1991, ‘Second-moment modelling of turbulent scalar transport’, Ph.D. Thesis, Faculty of Technology, University of Manchester, Manchester.
19. Craft, T. J. and Launder, B. E., 1989, ‘A new model for the pressure/scalar-gradient correlation and its application to homogeneous and inhomogeneous free shear flows’, Paper 17-1, Proc. Seventh Symposium on Turbulent Shear Flows, Stanford, California.
20. Craft, T. J. and Launder, B. E., 1992, ‘A new model of wall-reflection effects on the pressure-strain correlation and its application to the turbulent impinging jet’, AIAA Journal, 30, 2970-2972.
21. Craft, T. J. and Launder, B. E., 1999, ‘The self-similar three-dimensional wall jet’, in Turbulence and Shear-Flow Phenomena -1 (eds. S. Banerjee and J. K. Eaton), pp. 1129-1134, New York, Begell.
22. Craft, T. J. and Launder, B. E., 2001 ‘On the spreading mechanism of the three-dimensional wall jet’, J. FluidMech. 435, 305-326.
23. Craft, T. J. and Launder, B. E., 2002 ‘Application of TCL modelling to stratified flow’, in Closure Strategies for Turbulent and Transitional Flows (eds. B. E. Launder and N. D. Sandham), Cambridge, Cambridge University Press.
24. Craft, T. J., Launder, B. E. and Suga, K., 1993, ‘Extending the applicability of eddy-viscosity models through the use of deformation invariants and non-linear elements’, Proc. Fifth IAHR Conf. on Refined Flow Modelling and Measurements, pp. 125-132, Paris, Presses Ponts et Chaussees.
25. Craft, T. J., Ince, N. Z. and Launder, B. E., 1996a, ‘Recent developments in second-moment closure for buoyancy-affected flows’, Dynamics of Atmospheres and Oceans, 23, 99-114.
26. Craft T. J., Launder, B. E. and Suga, K., 1996b, ‘Development and application of a cubic eddy-viscosity model of turbulence’, Int. J. Heat Fluid Flow, 17, 590-596.
27. Craft, T. J., Kidger, J. W. and Launder, B. E., 1997a, ‘The importance of third-moment modelling in horizontal, stably-stratified flow’, Proc. Eleventh Symp. Turbulent Shear Flows, pp. 20.13-20.18, Grenoble.
28. Craft, T. J., Launder, B. E. and Suga, K., 1997b, ‘The prediction of turbulent transitional phenomena with a non-linear eddy-viscosity model’, Int. J. Heat Fluid Flow, 18, 15-28.
29. Craft, T. J., Kidger, J. W. and Launder, B. E., 1999, ‘The development of threedimensional, turbulent surface jets’, Turbulence & Shear Flow Phenomena -1 (eds. S. Banerjee and J. K. Eaton), pp. 1117-1122, New York, Begell House.
30. Craft, T. J., Gant, S. E., Iacovides, H. and Launder, B. E., 2001, ‘Development and application of a new wall function for complex turbulent flows’, Proc. ECCOMAS CFD Conference, Swansea.
31. Craft, T. J., Gant, S. E., Gerasimov, A. V., Iacovides, H. and Launder, B. E., 2002a, ‘Wall-function strategies for use in turbulent flow CFD’, Keynote Paper, Proc. Twelfth International Heat Transfer Conference, Grenoble.
32. Craft, T. J., Gerasimov, A. V., Iacovides, H. and Launder, B. E., 2002b, ‘Progress in the generalization of wall-function treatments’, Int. J. Heat Fluid Flow, 23, 148-160.
33. Craft, T. J., Gerasimov, A. V., Iacovides, H., Kidger, J. and Launder, B. E., 2003, ‘The negatively buoyant turbulent wall jet: performance of alternative options in RANS modelling’, Fourth Int. Symp. on Turbulence, Heat & Mass Transfer, Antalya, Turkey.
34. Craft, T. J., Gant, S. E., Iacovides, H. and Launder, B. E., 2004, ‘A new wall-function strategy for complex turbulent flows’, Numerical Heat Transfer, 45B, 301-318.
35. Cresswell, R., 1988, ‘An experimental study of a turbulent jet in which buoyancy acts against initial momentum’, Ph.D. Thesis, Council for National Academic Awards (CNAA).
36. Cresswell, R., Haroutunian, V., Ince, N. Z., Launder, B. E. and Szczepura, R. T., 1989, ‘Measurement and modelling of buoyancy-modified elliptic turbulent flows’, Proc. Seventh Symp. Turbulent Shear Flows, Stanford.
37. Daly, B. J. and Harlow, F. H., 1970, ‘Transport equations in turbulence’, Physics of Fluids, 13, 2634.
38. Deardorff, J. N., 1973, ‘The use of sub-grid transport equations in a three-dimensional model of atmospheric turbulence’, J. Fluids Engineering, 95, 429-438.
39. Dekeyser, I. and Launder, B. E., 1985, ‘A comparison of triple-moment temperature- velocity correlations in the asymmetric heated jet with alternative closure models’, in Turbulent Shear Flows 4 (eds. L. J. S. Bradbury, F. Durst, B. E. Launder, F. W. Schmidt and J. H. Whitelaw), pp. 102-117, Berlin, Springer Verlag.
40. Durbin, P. A., 1993, ‘Application of a near-wall turbulence model to boundary layers and heat transfer’, Int. J. Heat & Fluid Flow, 14, 316-323.
41. Durbin, P. A., 1995, ‘Separated flow computations with the k-e-v2 model’, AIAA Journal, 33, 659-664.
42. Ellison, T. H. and Turner, J. S., 1959, ‘Turbulent entrainment in stratified flows’, J. Fluid Mech, 6, 423-448.
43. Forstall, W. and Shapiro, A. H., 1950, ‘Momentum and mass transfer in coaxial gas jets’, J. Applied Mechanics, 17, 399-408.
44. Fu, S., Launder, B. E. and Tselipidakis, D. P., 1987, ‘Accommodating the effects of high strain rates in modelling the pressure-strain correlation’, Mechanical Engineering Dept. Rep. TFD/87/5, UMIST, Manchester.
45. Gant, S. E., 2002, ‘Development and application of a new wall function for complex turbulent flows’, Ph.D. Thesis, Dept. Mech., Aerosp. & Manuf. Eng, UMIST, Manchester.
46. Gatski, T. B. and Rumsey, C. L., 2002, ‘Linear and non-linear eddy viscosity models’, in Closure Strategies for Laminar and Turbulent Flows (eds. B. E. Launder and N. D. Sandham), pp. 9-46, Cambridge, Cambridge University Press.
47. Gerasimov, A., 2004, ‘Development and validation of an analytical wall-function strategy for modelling forced, mixed and natural convection flows’ Ph.D. Thesis, Dept. Mech., Aerospace & Manufacturing Engineering, UMIST.
48. Germano, M., Piomelli, U., Moin, P. and Cabot, W. H., 1991, ‘A dynamic, sub-grid-scale eddy-viscosity model’, Phys. Fluids, A3, 1760-1765.
49. Gibson, M. M. and Launder, B. E., 1976, ‘On the calculation of horizontal free shear flows under gravitational influence’, ASME J. Heat Transfer, 98, 379-386.
50. Gibson, M. M. and Launder, B. E., 1978, ‘Ground effects on pressure fluctuations in the atmosphere boundary layer’, J. Fluid Mech, 86, 491-511.
51. Grotzbach, G. and Worner, M., 1999, ‘Direct numerical and large-eddy simulations in nuclear applications’, Int. J. Heat Fluid Flow, 20, 222-240.
52. Hanjalic, K. and Launder, B. E., 1980, ‘Sensitizing the dissipation equation to irrotational strains’, ASME J. Fluids Eng., 102, 34-40.
53. Hanjalic, K. and Musemic, 1997, ‘Modelling the dynamics of double diffusive scalar fields at various stability conditions’, Int. J. Heat Fluid Flow, 18, 360-367.
54. Hanjalic, K. and Vasic, S., 1993, ‘Some further exploration of turbulence models for buoyancy driven flows’, in Turbulent Shear Flows - 8 (eds. F. J. Durst et al.), Heidelberg, Springer Verlag.
55. Hanjalic, K., Launder, B. E. and Schiestel, R., 1980, ‘Multiple-time-scale concepts in turbulent transport modelling’, in Turbulent Shear Flows - 2 (eds. L. J. S. Bradbury et al.), Heidelberg, Springer Verlag.
56. Haroutunian, V. and Launder, B. E., 1988, ‘Second-moment modelling of free buoyant shear flows: a comparison of parabolic and elliptic solutions’, in Stably-Stratified Flow and Dense Gas Dispersion (ed. J. S. Puttock), pp. 409-430, Oxford, Oxford University Press.
57. Hashiguchi, M., 1996, ‘Turbulence simulations in the Japanese automobile industry’, in Proc. Engineering Turbulence Modelling & Experiments - 3 (eds. W. Rodi and G. Bergeles), pp. 291-308, Amsterdam, Elsevier.
58. Hinze, J. O., 1973, ‘Experimental investigation on secondary currents in the turbulent flow through a straight conduit’, Appl. Sci. Res., 28, 453.
59. Hossain, M. S. and Rodi, W., 1982, ‘A turbulence model for buoyant flows and its application to vertical buoyant jets’, in Turbulent Buoyant Jets and Plumes (ed. W. Rodi), pp. 121-178, Oxford, Pergamon.
60. Huang, P. G., 1986, ‘The computation of elliptic turbulent flows with second-moment closure models’, Ph.D. Thesis, Faculty of Technology, University of Manchester.
61. Huang, G.-W., Kawahara, Y. and Tamai, N., 1993, ‘Numerical investigation of a buoyant shear flow with a multiple-time-scale model’, Proc. Fifth Symp. Refined Flow Modelling and Turbulence Measurements, pp. 769-776, Paris, Presses Ponts et Chaussees.
62. Iacovides, H. and Raisee, M., 1997, ‘Computation of flow and heat transfer in 2-D rib-roughened passages’, in Addendum to Second Int. Symp. on Turbulence, Heat and Mass Transfer (eds. K. Hanjalic and T. W. J. Peeters), pp. 21-30, The Netherlands, Delft University Press.
63. Iacovides, H. and Raisee, M., 1999, ‘Recent progress in the computation of flow and heat transfer in internal cooling passages of turbine blades’, Int. J. Heat & Fluid Flow, 20, 320-328.
64. Iacovides, H., Launder, B. E. and Li, H.-Y., 1996, ‘The computation of flow development through stationary and rotating U-ducts of strong curvature’, Int. J. Heat & Fluid Flow, 17, 22-33.
65. Ilyushin, B. B., 2002, ‘Higher moment diffusion in stable stratification’, in Closure Strategies for Laminar and Turbulent Flows (eds. B. E. Launder and N. D. Sandham), pp. 424-448, Cambridge, Cambridge University Press.
66. Ince, N. Z. and Launder, B. E., 1989, ‘On the computation of buoyancy-driven turbulent flows in rectangular enclosures’, Int. J. Heat Fluid Flow, 10, 110-117.
67. Ince, N. Z. and Launder, B. E., 1995, ‘Three-dimensional and heat-loss effects on turbulent flow in a nominally two-dimensional cavity’, Int. J. Heat & Fluid Flow, 16, 171-177.
68. Jackson, J. D., Cotton, M. A. and Axcell, B. P., 1989, ‘Studies of mixed convection in vertical tubes’, Int. J. Heat & Fluid Flow, 10, 2-15.
69. Johnson, R. W., 1984, ‘Turbulent convecting flow in a square duct with a 180 degree bend: an experimental and numerical study’, Ph.D. thesis, Faculty of Technology, University of Manchester.
70. Jones, W. P. and Launder, B. E., 1972, ‘The prediction of laminarization with a two-equation model of turbulence’, Int. J. Heat Mass Transfer, 15, 301-314.
71. Jones, W. P. and Launder, B. E., 1973, ‘The calculation of low-Reynolds-number phenomena with a two-equation model of turbulence’, Int. J. Heat Mass Transfer, 16, 1119-1130.
72. Kawamura, H., Sasaki, J. and Kobayashi, K., 1995, ‘Budget and modelling of triple-moment velocity correlations in a turbulent channel flow based on DNS’, Tenth Int. Symp. on Turbulent Shear Flows, Pennsylvania State University.
73. Kenjeres, S. and Hanjalic, K., 1999, ‘Transient analysis of Rayleigh-Benard convection with a RANS model’, Int. J. Heat & Fluid Flow, 20, 329-340.
74. Kenjeres, S. and Hanjalic, K., 2002, ‘A numerical insight into flow structure in ultra-turbulent thermal convection’, Phys. Rev. E, 66, 1-5.
75. Kenjeres, S. and Hanjalic, K., 2003, ‘Numerical contribution to insight into the elusive, ultimate state of turbulent thermal convection’, EUROMECH Coll. 443, Lorentz Centre Leiden, The Netherlands.
76. Kidger, J. W., 1999, ‘Turbulence modelling for stably stratified flows and free-surface jets’, Ph.D. Thesis, Dept. of Mechanical Engineering, UMIST, Manchester.
77. Kim, J., Moin, P. and Moser, R., 1987, ‘Turbulence statistics in fully developed channel flow at low Reynolds number’, J. FluidMech., 177, 133-166.
78. Launder, B. E., 1975, ‘On the effects of a gravitational field on the turbulent transport of heat and momentum’, J. Fluid Mech., 67, 569-581.
79. Launder, B. E., 1976, ‘Heat Transfer’, in Topics inAppl. Phys., Vol 12: Turbulence (ed. P. Bradshaw), Berlin, Springer Verlag.
80. Launder, B. E., 1985 ‘Progress and problems in phenomenological turbulence models’, Chapter 7 in Theoretical Approaches to Turbulence (eds. D. L. Dwoyer, M. Y. Hussaini and R. G. Voigt), New York, Springer Verlag.
81. Launder, B. E., 1986 ‘Low Reynolds number turbulence near walls’, UMIST Mechanical Engineering Department Report TFD/86/4.
82. Launder, B. E., 1988, ‘On the computation of convective heat transfer in complex turbulent flows’, ASME J. Heat Transfer, 110, 1112-1128.
83. Launder, B. E., 1989a, ‘Second-moment closure: present… and future?’, Int. J. Heat Fluid Flow, 10, 282-300.
84. Launder, B. E., 1989b, ‘The prediction of force-field effects on turbulent shear flows via second-moment closure’, Advances in Turbulence - 2 (eds. H. Fernholz and H. E. Fieldler), pp. 338-358, Berlin, Springer.
85. Launder, B. E. and Li, S.-P., 1994, ‘On the elimination of wall-topography parameters from second-moment closure’, Phys. Fluids, 6, 999-1000.
86. Launder, B. E. and Sandham, N., 2002 (eds.), Closure Strategies for Turbulent and Transitional Flows, Cambridge, Cambridge University Press.
87. Launder, B. E. and Schiestel, R., 1978, ‘Sur l’utilisation d’echelles temporelles multiples en modelisation des ecoulements turbulents’, Comptes Rendues Acad. Sciences, Paris, A288, 709-712.
88. Launder, B. E. and Sharma, B. I., 1974, ‘Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc’, Letters in Heat Mass Transfer, 1, 131-138.
89. Launder, B. E. and Spalding, D. B., 1974, ‘The numerical computation of turbulent flows’, Computational Methods in Applied Mechanics and Engineering, 3, 269-289.
90. Launder, B. E. and Tselipidakis, D. P., 1992, ‘Contribution to the modelling of near-wall turbulence’, Turbulence Shear Flows - 8 (eds. F. Durst et al.), pp. 81-96, Heidelberg, Springer Verlag.
91. Launder, B. E., Morse, A. P., Rodi, W. and Spalding, D. B., 1973, ‘Prediction of free shear flows: a comparison of the performance of six turbulence models’, Proc. NASA Conf. On Free Turbulent Shear Flows, NASA SP-321, pp. 361-426.
92. Launder, B. E., Reece, G. J. and Rodi, W., 1975, ‘Progress in the development of a Reynolds stress turbulence closure’, J. Fluid Mech., 68, 537-566.
93. Launder, B. E., Priddin, C. H. and Sharma, B. I., 1977, ‘The calculation of turbulent boundary layers on curved and spinning surfaces’, ASME J. Fluids Engineering, 99, 231-239.
94. Lumley, J. L., 1978, ‘Computational modeling of turbulent flows’, Advances in Applied Mechanics, 18, 123.
95. McGuirk, J. J. and Papadimitriou, C., 1985, ‘Buoyant surface layers under fully-entraining and internal-hydraulic-jump conditions’, Proc. Fifth Symp. Turbulent Shear Flows, pp. 22.30-22.41, Cornell University.
96. Mellor, G. L., 1973, ‘Analytic prediction of the properties of stratified planetary boundary layers’, J. Atmos. Sci., 30, 1061-1069.
97. Millionshtchikov, M. D., 1941, ‘On the role of the third moments in isotropic turbulence’, C. R. Acad. Sci. SSSR, 32, 619.
98. Moin, P., 2000, Oral remarks at open-forum discussion held at Burgers Day 2000, TU Delft, The Netherlands.
99. Muramatsu, T., 1993, ‘Intensity and frequency evaluations of sodium temperature fluctuations related to thermal striping phenomena based on numerical methods’, Fifth Int. Symp. Refined Flow Modelling and Turbulence Measurements, pp. 351-358, Paris, Presses Ponts et Chaussees.
100. Naot, D., Shavit, A. and Wolfshtein, M., 1970, ‘Interactions between components of the turbulent velocity correlation tensor due to pressure fluctuations’, Israel J. Tech., 8, 259-269.
101. Oberlack, M., 1995, ‘Closure of the dissipation tensor and the pressure-strain tensor based on the two-point correlation equation’, in Turbulent Shear Flows - 9 (eds. F. Durst et al.), pp. 33-52, Berlin, Springer.
102. Patel, V. C., Rodi, W. and Scheuerer, G., 1985, ‘Turbulence models for near-wall and low-Reynolds-number flows: a review’, AIAA J., 23, 1308.
103. Pope, S. B., 1975, ‘A more general effective viscosity hypothesis’, J. FluidMech., 72, 331-340.
104. Pope, S. B., 1978, ‘An explanation of the turbulent round-jet/plane-jet anomaly’, AIAA J, 16, 279-281.
105. Prandtl, L., 1925, ‘Bericht uber Untersuchungen zur ausgebildeten Turbulenz’, ZAMM, 5, 136.
106. Rajaratnam, N. and Humphreys, J. A., 1984, ‘Turbulent, non-buoyant surface jets’, J. Hydraulic Res., 22, 103-115.
107. Robinson, C., 2001, ‘Advanced CFD modelling of road vehicle aerodynamics’, Ph.D. Thesis, Department of Mechanical Engineering, UMIST, Manchester.
108. Rodi, W., 1972, ‘The prediction of free turbulent boundary layers by use of a two-equation model of turbulence’, Ph.D. Thesis, Faculty of Engineering, University of London.
109. Rodi, W., 1976, ‘A new algebraic relation for calculating the Reynolds stresses’, ZAMM, 56, T219-T221.
110. Rotta, J. C., 1951, ‘Statistische Theorie nichthomogener Turbulenz’, Zeitschr. Physik, 129, 547-572.
111. Savill, A. M., 1991, ‘Predicting transition induced by free stream turbulence’, First European Fluid Mechanics Conference.
112. Schiestel, R., 1987, ‘Multiple-time-scale modelling of turbulent flows in one-point closures’, Phys. Fluids, 30, 722.
113. Schumann, U., 1976, ‘Numerical simulation of the transition from three- to two-dimensional turbulence under a uniform magnetic field’, J. Fluid Mech, 74, 31-58.
114. Schumann, U., 1977, ‘Realizability of Reynolds-stress turbulence models’, Phys. Fluids, 20, 721-723.
115. Shih, T. H. and Lumley, J. L., 1985, ‘Modelling of pressure-correlation terms in Reynolds-stress and scalar-flux equations’, Sibley School of Mechanical & Aerospace Eng. Rep. FDA-85-3, Cornell University, Ithaca, New York.
116. Shir, C. C., 1973, ‘A preliminary numerical study of atmospheric turbulent flows in the idealized planetary boundary layer’, J. Atmos. Sciences, 30, 1327-1339.
117. Smagorinsky, J. S., 1963, ‘General circulation experiments with the primitive equations: 1. The basic experiment’, Mon. Weather Rev., 91, 99-164.
118. Suga, K., 1995, ‘Development and application of a non-linear eddy-viscosity model sensitized to stress and strain invariants’, Ph.D. Thesis, Faculty of Technology, University of Manchester.
119. Uittenbogaard, R., 1992, ‘Measurement of turbulent fluxes in a steady-stratified mixing layer’, Proc. Third Int. Symp. on Refined Flow Modelling and Turbulence Measurement, Tokyo.
120. Versteegh, T. A. M. and Nieuwstadt, F. T. M., 1998, ‘Turbulent budgets of natural convection in an infinite, differentially heated vertical channel’, Int. J. Heat Fluid Flow, 19, 135-149.
121. Viollet, J.-P., 1980, ‘Turbulent mixing in a two-layer stratified shear flow’, Second Int. Symp. on Stratified Flows, Trondheim, Norway.
122. Viollet, J.-P., 1987 ‘The modelling of turbulent recirculating flows for the purpose of reactor thermal-hydraulic analysis’, Nuclear Eng. Design, 99, 365-377.
123. Voke, P. R. and Gao, S., 1994, ‘Large eddy simulation of heat transfer from an impinging plane jet’, Int. J. Num. Methods Eng.
124. Webster, C. A. G., 1964, ‘An experimental study of turbulence in a density-stratified shear flow’, J. FluidMech., 19, 221-245.
125. Wilcox, D., 1993, Turbulence modeling for CFD, La Canada, CA, DCW Industries.
126. Woodburn, P., 1995, ‘CFD simulation of fire-generated flows in tunnels and corridors’, Ph.D. Thesis, Cambridge University.
127. Worner, M. and Grotzbach, G., 1998, ‘Pressure transport in direct numerical simulations of turbulent natural convection in horizontal fluid layers’, Int. J. Heat Fluid Flow, 19, 150-158.
128. Wyngaard, J. C. and Sundarajan, A., 1979, ‘The temperature skewness budget in the lower atmosphere and its implications for turbulence modelling’, in Turbulent Shear Flows 1 (eds. F. Durst, B. E. Launder, J. H. Schmidt and J. H. Whitelaw), pp. 319-326, Berlin, Springer Verlag.
129. Yap, C., 1987, ‘Turbulent heat and momentum transfer in recirculating and impinging flows’, Ph.D. Thesis, Faculty of Technology, University of Manchester.
130. Yonemura, A. and Yamamoto, M., 1995, ‘Proposal of a multiple-time-scale Reynolds stress model for turbulent boundary layers’, Proc. Int. Symp. Math. Modelling Turb. Flows, pp. 381-386, Tokyo, Japan.
131. Young, S. T. B., 1975, ‘Turbulence measurements in a stably-stratified shear flow’, Rep QMC-EP6018, Queen Mary College, London.
132. Zeman, O. and Lumley, J. L., 1976, ‘Modeling buoyancy driven mixing layers’, J. Atmos. Sci., 33, 1974-1988.