Erosion and sedimentation, Second edition

Erosion and Sedimentation, Second Edition

Volumn 9780521830386, Issue , 2010, Pages 1-371

  Julien, Pierre Y ^a  

^a Department of Environmental and Radiological Health Sciences   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

EROSION; SEDIMENT TRANSPORT; STATISTICAL MECHANICS; TEXTBOOKS;

EROSION AND SEDIMENTATION; FUNDAMENTAL CONCEPTS; MODIFIED EINSTEIN PROCEDURES; NEW SOLUTIONS; SEDIMENT MIXTURES; SIZE FRACTION; TRANSPORT THEORY; WATER SCIENCE;

SEDIMENTATION;

EID: 84924435858     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1017/CBO9780511806049     Document Type: Book

References (237)

1. Ackers, P. and W. R. White (1973). Sediment transport: New approach and analysis. J. Hyd. Div. ASCE, 99, no. HY11, 2041–60.
2. Adriaanse, M. (1986).Deruwheid van de Bergsche Maas bij hoge afvoeren. Rijkswaterstaat, RIZA, Nota 86.19. Dordrecht.
3. Akalin, S. (2002).Water temperature effect on sand transport by size fraction in the lower Mississippi River. Ph.D. dissertation, Colorado State University, 243 p.
4. Alonso, C.V., W.H. Neibling, and G. R. Foster (1991). Estimating sediment transport capacity in watershed modeling. Trans. ASAE, 24, no. 5, 1211–20.
5. American Society of Civil Engineers (1975). Sedimentation Engineering. ASCE Manuals and Reports on Engineering Practice no. 54. New York.
6. American Society of Civil Engineers (2007). “Sedimentation Engineering – Processes, Measurement, Modeling and Practice”, Manual and Reports on Engineering Practice No. 110.
7. Anderson, A.G. (1942). Distribution of suspended sediment in natural streams Trans. Am. Geoph. Union, 678–83.
8. Athaullah, M. (1968). Prediction of bedforms in erodible channels. Ph.D. thesis, Colorado State University.
9. Atkinson, E. (1994). Vortex-tube sediment extractors I: trapping efficiency. J. Hyd. Engr. ASCE, 120, no. 10, 1110–25.
10. Bagnold, R.A. (1954). Experiments on a gravity-free dispersion of large solid spheres in a Newtonian fluid under shear. Proc. Roy. Soc. Lond. A225, 49–63.
11. Bagnold, R.A. (1956). Flow of cohesionless grains in fluids. Phil. Trans. Roy. Soc. Lond., 249, no. 964, 235–97.
12. Bagnold, R.A. (1966). An approach to the sediment transport problem from general physics. Professional Paper 422-I. U.S. Geological Survey, Washington, D.C.
13. Baird, D. C. (2004). Turbulent flow and suspended sediment transport in a mobile, sand-bed channel with riprap side slopes. Ph.D. dissertation, University of New Mexico, 260 p.
14. Bakke, P. D., P. O. Basdekas, D. R. Dawdy, and P. C. Klingeman (1999). Calibrated Parker-Klingeman model for gravel transport. J. Hyd. Div. ASCE, 25 no. 6, 657–60.
15. Barekyan, A. S. (1962). Discharge of channel forming sediments and elements of sand waves. Soviet Hydrol. Selected Papers, 128–30.
16. Beverage, J. P. and J. K. Culbertson (1964). Hyperconcentrations of suspended sediment. J. Hyd. Div. ASCE, 90, no. HY6, 117–28.
17. Bingham, E. C. (1922). Fluidity and Plasticity. New York: McGraw-Hill.
18. Bird, R. B., W. E. Stewart, and E. N. Lightfoot (1960). Transport Phenomena. New York: Wiley.
19. Bishop, A.A., D. B. Simons, and E.V. Richardson (1965). Total bed material transport. J. Hyd. Div. ASCE, 91, no. HY2, 175–91.
20. Bogardi, J. (1974). Sediment Transport in Alluvial Streams. Budapest: Akademiai Kiado.
21. Borland, W. M. (1971). Reservoir sedimentation. In River Mechanics, ed. H.W. Shen. Ft. Collins, Colo.: Water Resources Pub.
22. Borland, W. M. and C. R. Miller (1958). Distribution of sediment in large reservoirs. J. Hyd. Div. ASCE, 84, no. HY2, 1–18.
23. Bormann, N. E. and P.Y. Julien (1991). Scour downstream of grade-control structures. J. Hyd. Engr., ASCE, Vol. 115, No.5, 579–94.
24. Bounvilay, B. (2003). Transport velocities of bedload particles in rough open channel flows. Ph.D. dissertation, Colorado State University, 155p.
25. Boyce, R. (1975). Sediment routing and sediment-delivery ratios. In Present and Prospective Technology for Predicting Sediment Yields and Sources, USDA-ARS-S-40, pp. 61–5.
26. Bray, D. I. (1982). Flow resistance in gravel-bed rivers. In Gravel-Bed Rivers, Fluvial Processes, Engineering and Management, ed. R. D. Hey, J.C. Bathurst, and C. R. Thorne. New York: Wiley. pp. 109–37.
27. Bridgman, P.W. (1922). Dimensional Analysis. New Haven, Conn.: Yale University Press.
28. Brooks, N. H. (1958). Mechanics of streams with movable beds of fine sediment. Trans. ASCE, 123: 525–49.
29. Brown, C. B. (1950). Sediment transportation. In Engineering Hydraulics, ed. H. Rouse. New York: Wiley. pp. 769–857.
30. Brownlie, W. R. (1981). Prediction of flow depth and sediment discharge in open-channels. Report no. KH-R-43A. Pasadena: California Institute of Technology, W. M. Keck Laboratory.
31. Buckingham, E. (1914).Onphysical similar systems: Illustration of the use of dimensionless equations. Phys. Rev., 4, no. 4.
32. Bunte, K. and S. R. Abt (2001). Sampling surface and subsurface particle-size distributions in wadable gravel- and cobble-bed streams for analyses in sediment transport, hydraulics, and streambed monitoring. General Technical Report RMRS-GTR-74, U.S.D.A. Forest Service, Rocky Mountain Research Station, 428 p.
33. Bunte, K. and S. R. Abt (2005). Effect of sampling time on measured gravel bedload transport rates in a coarse-bedded stream. Water Resources Research, 41, W11405.
34. Bunte, K., S. R. Abt, J. P. Potyondy, and S. E. Ryan. (2004). Measurement of coarse gravel and cobble transport using a portable bedload trap. J. Hyd. Engr., ASCE, 130 No. 9: 879–93.
35. Bunte, K., S. R. Abt, J. P. Potyondy, and K.W. Swingle. (2008).Acomparison of coarse bedload transport measured with bedload traps and Helley-Smith samplers. Geodinamica Acta, 21/1–2: 53–66.
36. Burkham, D. E. and Dawdy, D.R. (1980). General study of the Modified Einstein Method of computing total sediment discharge. Water-Supply Paper 2066, U.S. Geological Survey, Washington.
37. Carstens, M. R. (1952). Accelerated motion of a spherical particle. Trans. Am. Geophy. Union, 33, no. 5.
38. Cecen, K., M. Bayazit and M. Sumer (1969). Distribution of suspended matter and similarity criteria in settling basins. Proc. 13th Congress of the IAHR, Kyoto, Japan Vol. 4: 215–25.
39. Chabert, J. and J. L. Chauvin (1963). Formation de dunes et de rides dans les modèles fluviaux. Bull. Cen. Rech. Ess. Chatou, no. 4.
40. Chang, F. M., D. B. Simons, and E.V. Richardson (1965). Total bed material discharge in alluvial channels. Water Supply Paper 1498-I. Washington, D.C.: U.S. Geological Survey.
41. Chien, N. (1956). The present status of research on sediment transport. Trans. ASCE, 121, 833–68.
42. Chow, V.T. (1964). Open Channel Hydraulics. New York: McGraw-Hill.
43. Colby, B.R. (1960). Discontinuous rating curves for Pigeon Roost and Cuffawa Creeks in northern Mississippi. ARS 41–36. Washington, D.C.: U.S. Department of Agriculture.
44. Colby, B.R. (1964a). Discharge of sands and mean velocity relationships in sand-bed streams. Professional Paper 462-A.Washington, D.C.: U.S. Geological Survey.
45. Colby, B.R. (1964b). Practical computations of bed material discharge. J. Hyd. Eng., 90, no. HY2, 217–46.
46. Colby, B.R. and C. H. Hembree (1955). Computations of total sediment discharge Niobrara River near Cody, Nebraska. Water Supply Paper 1357. Washington, D.C.: U.S. Geological Survey.
47. Colby, B.R. and Hubbell, D.W. (1961). Simplified method for computing total sediment discharge with the modified Einstein procedure. Water-Supply Paper 1593., U.S. Geological Survey, Washington.
48. Coleman, N. L. (1981). Velocity profiles with suspended sediment. J. Hyd. Res., 19, no. 3, 211–29.
49. Coleman, N. L. (1986). Effects of suspended sediment on the open-channel velocity distribution. Water Resources Res., 22, no. 10, 1377–84.
50. Coles, D. E. (1956). The law of the wake in the turbulent boundary layer. J. Fluid Mech., 1, 191–226.
51. Culbertson, J. K., C. H. Scott and J. P. Bennett (1972). Summary of alluvial channel data from the Rio Grande Conveyance Channel, New Mexico, 1965–69. USGS Prof. Paper 562-J.
52. Dawdy, D.R. (1961). Studies of flow in alluvial channels, depth, height and discharge relation for alluvial streams. Water Supply Paper 1798c. Washington, D.C.: U.S. Geological Survey.
53. De Cesare, G., J. L. Boillat and A. J. Schleiss (2006). Circulation in stratified lakes due to flood-induced turbidity currents. J. Env. Eng. ASCEVol. 132 No. 11, 1508–17.
54. DuBoys, M. P. (1879). Etudes du régime du Rhône et de l’action exercée par les eaux sur un lit à fond de graviers indéfiniment affouillable. Ann. Ponts et Chaussées, ser.5, 18, 141–95.
55. Edwards, T. K. and E. D. Glysson (1988). Field methods for measurement of fluvial sediment. Open-File Report 86–531. Reston, Va: U.S. Geological Survey.
56. Egiazaroff, I.V. (1965). Calculation of non-uniform sediment concentration. J. Hyd. Div. ASCE, 91, no. HY4, 225–48.
57. Einstein, H.A. (1942). Formulas for the transportation of bed load. Trans. ASCE, 107, 561–73.
58. Einstein, H.A. (1950). The bed load function for sediment transport in open channel flows. Technical Bulletin no. 1026. Washington, D.C.: U.S. Department of Agriculture, Soil Conservation Service.
59. Einstein, H.A. (1964). Sedimentation, Part II: River sedimentation. In Handbook of Applied Hydrology, ed. V. T. Chow. New York: McGraw-Hill, sec. 17.
60. Einstein, H.A. and N. Chien (1955). Effects of heavy sediment concentration near the bed on velocity and sediment distribution. MRD Series no. 8. Berkeley: University of California: Institute of Engineering Research; Omaha, Neb.: U.S. Army Engineering Div., Missouri River, Corps of Engineers.
61. Emmett, W.W. (1979). A field calibration of the sediment trapping characteristics of the Helley-Smith bedload sampler. Open File Report 79–411. Denver, Colo.: U.S. Geological Survey.
62. Engelund, F. (1966). Hydraulic resistance of alluvial streams. J. Hyd. Div. ASCE, 92, no. HY2, 315–26.
63. Engelund, F. (1977). Hydraulic resistance for flow over dunes. Prog. Rep. 44, Inst. Hydrodynamics and Hydraulic Engineering, Tech University, Denmark, Dec. 19–20.
64. Engelund, F. and E. Hansen (1967). A Monograph on Sediment Transport to Alluvial Streams. Copenhagen: Teknik Vorlag.
65. Etcheverry, B.A. (1916). Irrigation practice and engineering: The conveyance of water. Trans. ASCE, 11.
66. Fischer, H. B., E. J. List, R. C. Koh, J. Imberger, and N. H. Brooks (1979). Mixing in Inland and Coastal Waters. New York: Academic Press.
67. Fortier, A. (1967). Mécanique des Suspensions. Monographie de Mécanique des Fluides et Thermique. Paris: Masson.
68. Fortier, S. and F. C. Scobey (1926). Permissible canal velocities. Trans. ASCE, 89, paper no. 1588, 940–84.
69. Frenette, M. and P.Y. Julien (1985). Computer modeling of soil erosion and sediment yield from large watersheds. Proc. 27th Annual Convention of the Institute of Engineers, Peshawar, Pakistan.
70. Frenette, M. and P.Y. Julien (1986a). Advances in predicting reservoir sedimentation. General lecture, Third International Symposium on River Sedimentation, ISRS-111, Jackson, Mississippi, March 31 to April 4, pp. 26–46.
71. Frenette, M. and P.Y. Julien (1986b). LAVSED I: Amodel for predicting suspended load in northern streams. Can. J. Civ. Eng., 13, no. 2, 150–61.
72. Frenette, M. and P.Y. Julien (1987). Computer modeling of soil erosion and sediment yield from large watersheds. Int. J. Sed. Res. 1, 39–68.
73. Frenette, M., J. C. Souriac, and J. P. Tournier (1982). Modélisation de l’alluvionnement de la retenue de Péligre, Haiti. Proc. 14th International Congress on Large Dams, Rio de Janeiro, May 3–7, pp. 93–115.
74. Frenette, M., J. P. Tournier, and T. J. Nzakimuena (1982). Cas historique des sédimentation du barrage Péligre, Haiti. Can. J. Civ. Eng., 9, no. 2, 206–23.
75. Garde, R. J. and K.G. Ranga Raju (1985). Mechanics of Sediment Transportation and Alluvial Stream Problems, 2d ed. New York: Wiley.
76. Gessler, J. (1971). Beginning and ceasing of sediment motion. In River Mechanics, ed. H.W. Shen. Littleton, Colo.: Water Resources Pub., Chap. 7.
77. Gilbert, G. K. (1914). The transport of debris by running water. Professional Paper 86. Washington, D.C.: U.S. Geological Survey.
78. Goldstein, S. (1929). The steady flow of viscous fluid past a fixed spherical obstacle at small Reynolds number. Proc. Roy. Soc. Lond., 123A, 225–35.
79. Gordon, L. (1992). Mississippi River Discharge. San Diego, CA: RD Instruments.
80. Govier, G.W., C.A. Shook, and E. O. Lilge (1957). The properties of water suspension of finely subdivided magnetite, galena, and ferrosilicon. Trans. Can. Inst. Mining Met., 60, 147–54.
81. Graf, W. H. (1971). Hydraulics of Sediment Transport. New York: McGraw-Hill.
82. Guo, J. (1998). Turbulent velocity profiles in clear water and sediment laden flows. Ph.D. dissertation, Colorado State University.
83. Guo, J. and P.Y. Julien (2003). Modified log-wake law for turbulent flow in smooth pipes. J. Hyd. Res, IAHR, 41, no. 5, 493–501.
84. Guo, J. and P.Y. Julien (2004). An efficient algorithm for computing Einstein integrals, Technical Note, J. Hyd. Engr., ASCE, 130, no.12, 1198–1201.
85. Guo, J. and P.Y. Julien (2007). Buffer law and roughness effect in turbulent boundary layers, Fifth International Symposium on Environmental Hydraulics, Tempe, Arizona, 6p.
86. Guo, J. and P.Y. Julien (2008). Applications of the modified log-wake law in open channels. J. Applied Fluid Mechanics, 1, no. 2, 17–23.
87. Guy, H. P. and V.W. Norman (1970). USGS techniques of water resources investigations. In Fluid Methods for Measurement of Fluvial Sediments. Washington, D. C.: U.S. Government Printing Office, Book 3, Chap. C-2.
88. Guy, H. P., D. B. Simons, and E.V. Richardson (1966). Summary of alluvial channel data from flume environments, 1956–1961. Professional Paper 462-I. Washington, D.C.: U.S. Geological Survey.
89. Happel, J. and H. Brenner (1965). Low Reynolds Number Hydrodynamics. Englewood Cliffs, N.J.: Prentice-Hall.
90. Hartley, D.M. and P.Y. Julien (1992). Boundary shear stress induced by raindrop impact. J. Hyd. Res. IAHR, 30, no. 3, 351–9.
91. Hayashi, T., S. Ozaki and T. Ichibashi (1980). Study on bed load transport of sediment mixture. Proc. 24th Japanese Conference on Hydraulics.
92. Henderson, F. M. (1966). Open Channel Flow. New York: Macmillan.
93. Highway Research Board (1970). Tentative design procedure for riprap-lined channels. Report no. 108. Washington, D.C.: National Academy of Sciences, National Cooperative Highway Research Program.
94. Holmquist-Johnson, C. and Raff, D.A (2006). Bureau of Reclamation automated modified Einstein procedure (BORAMEP) program for computing total sediment discharge. U.S. Department of the Interior, Bureau of Reclamation, Denver, CO.
95. Hubbel, D.W. and D. Q. Matejka (1959). Investigation of sediment transportation, Middle Loup River at Dunning, Nebraska. USGS Water Supply Paper 1476.
96. Hunsaker, J.C. and B.G. Rightmire (1947). Engineering Applications of Fluid Mechanics. New York: McGraw-Hill.
97. Interagency Committee (1952). The design of improved types of suspended sediment samplers. Report no. 6. Iowa City: Subcommittee on Sedimentation, Federal Interagency River Basin Committee, Hydrology Laboratory of the Iowa Institute of Hydraulic Research.
98. Jenson, V. J. (1959). Viscous flow round a sphere at low Reynolds numbers. Proc. Roy. Soc. Lond., A249, 346–66.
99. Ji, U. (2006). Numerical model for sediment flushing at the Nakdong River Estuary Barrage. Ph.D. dissertation, Colorado State University, 195 p.
100. Johnson, B. E., P.Y. Julien, D. K. Molnar and C. C. Watson (2000). The two-dimensional upland erosion model CASC2D-SED, JAWRA, AWRA, 36, no. 1, 31–42.
101. Julien, P.Y. (1979). Erosion de bassin et apport solide en suspension dans les cours d’eau nordiques. M.Sc. thesis, Laval University.
102. Julien, P.Y. (1982). Prédiction d’apport solide pluvial et nival dans les cours d’eau nordiques à partir du ruissellement superficiel. Ph.D. dissertation, Laval University.
103. Julien, P.Y. (1988). Downstream hydraulic geometry of noncohesive alluvial channels. Proc. International Conference on River Regime, Wallingford, England, 9–16.
104. Julien, P.Y. (1992). Study of bedform geometry in large rivers. Delft Hydraulics, Report Q1386. Emmeloord.
105. Julien, P.Y. (2002). River Mechanics. Cambridge: Cambridge University Press, 434 p.
106. Julien, P.Y. and M. Frenette. (1986a) Predicting washload from rainfall and snowmelt runoff. Proc. Third International Symposium on River Sedimentation, ISRS-111, Jackson, Mississippi, pp. 1259–65.
107. Julien, P.Y. and M. Frenette. (1986b). LAVSED II: A model for predicting suspended load in northern streams. Can. J. Civ. Eng., 13, no. 2, 162–70.
108. Julien, P.Y. and M. Frenette. (1987). Macroscale analysis of upland erosion. Hyd. Sci. J. IAHS, 32, no. 3, 347–58.
109. Julien, P.Y. and M. Gonzalez del Tanago (1991). Spatially-varied soil erosion under different climates. Hyd. Sci. J. IAHS, 36, no. 6, 511–24.
110. Julien, P.Y. and G. J. Klaassen (1995). Sand-dune geometry in flooded rivers, J. Hyd. Engr., ASCE, 121, no. 9, 657–63.
111. Julien, P.Y. and Y. Q. Lan (1991). Rheology of hyperconcentrations. J. Hydr. Engr. ASCE, 115, no. 3, 346–53.
112. Julien, P.Y. and C.A. Leon (2000). Mudfloods, mudflows and debris flows: classification, rheology and structural design, International Seminar on the Debris Flow Disaster of December 1999. Caracas, Venezuala.
113. Julien, P.Y. and Y. Raslan (1998). Upper-regime plane bed. J. Hydr. Engr., ASCE, 124, no. 11, 1086–96.
114. Julien, P.Y., G. J. Klaassen, W.T. M. ten Brinke, and A.W. E. Wilbers (2002). Case study: bed resistance of the Rhine River during the 1998 flood, J. Hydr. Engr., ASCE, 128, no. 12, 1042–50.
115. Julien, P.Y. and Rojas, R (2002). Upland erosion modeling with CASC2D-SED. Intl. J. Sed. Res., 17, no. 4, 265–74.
116. Julien, P.Y. and D. B. Simons (1985a). Sediment transport capacity of overland flow. Trans. ASAE, 28, no. 3, 755–62.
117. Julien, P.Y. and D. B. Simons (1985b). Sedimnt transport capacity equations for rainfall erosion. Proc. Fourth International Hydrology Symposium, Fort Collins, CO, 988–1002.
118. Julien, P.Y., G. Richard, and J. Albert (2005). Stream restoration and environmental river mechanics, Special Issue of the J. River Basin Management, IAHR & INBO, 3, no. 3, 191–202.
119. Kalinske, A. A (1942). Criteria for determining sand transport by surface creep and saltation. Trans. AGU, 23, part 2, 639–43.
120. Kalinske, A. A (1947). Movement of sediment as bed load in rivers. Trans. AGU, 28, no. 4, 615–20.
121. Kamphuis, J.W (1974). Determination of sand roughness for fixed beds. J. Hyd. Res. IAHR, 12, no. 2, 193–203.
122. Kane, B. and P.Y. Julien (2007). Specific degradation of watersheds. Intl. J. Sed. Res., 22, no. 2, 114–19.
123. Karim, F. and J. F. Kennedy (1983). Computer-based predictors for sediment discharge and friction factor of alluvial streams. Report no. 242. Iowa Institute of Hydraulic Research, University of Iowa.
124. Keulegan, G. H. (1949). Interfacial instability and mixing in stratified flows. J. Res. Nat. Bur. Stand., 43, no. 487, RP 2040.
125. Kikkawa, H. and T. Ishikawa (1978). Total load of bed materials in open channels. J. Hyd. Div. ASCE, 104, no. HY7, 1045–60.
126. Kilinc, M.Y. (1972). Mechanics of soil erosion from overland flow generated by simulated rainfall. Ph.D. dissertation, Colorado State University.
127. Kim, H. S. (2006). Soil erosion modeling using RUSLE and GIS on the Imba Watershed, South Korea. M.S. Thesis, Colorado State University, 118 p.
128. Kim, H. S. and P.Y. Julien (2006). Soil erosion modeling using RUSLE and GIS on the Imha Watershed, South Korea. Water Engineering Research, J. Korean Water Resources Association, 7, no. 1, 29–41.
129. Kircher, J. E. (1981). Sediment analyses for selected sites on the South Platte River in Colorado and Nebraska, and the North Platte and Platte Rivers in Nebraska; suspended sediment, bedload, and bed material. U.S. Geological Survey Open-File Report 81–207, United States Department of the Interior Geological Survey, Denver, CO.
130. Klaassen, G. J., J. S. Ribberink, and J. C. C. de Ruiter (1988). On sediment transport of mixtures. Pub. 394. Delft Hydraulics, Emmeloord.
131. Kodoatie, R. J. (1999). Sediment transport relationing in alluvial channels. Ph.D. dissertation, Colorado State University, 287 p.
132. Kopaliani, Z. D. (2002). Fluvial processes in rivers. Proc. State Hydrological Institute #361. Hydrometeoizdat, St. Petersburg, 146–84. (in Russian).
133. Kopaliani, Z. D. (2007). Problem of bed load discharge assessment in rivers. Proc. 10th Symposium of the International Research and Training Center on Erosion and Sedimentation, Moscow, 175–81.
134. Lacey, G. (1929). Stable channels in alluvium. Proc. Inst. Civ. Eng., 229.
135. Lambe, T.W. and R.V. Whitman, (1969). Soil Mechanics. Wiley and Sons, 553 p.
136. Lane, E.W. (1953). Progress report on studies on the design of stable channels by the Bureau of Reclamation. Proc. ASCE, 79, no. 280.
137. Langhaar, H. L. (1951). Dimensional Analysis and Theory of Models. New York: Wiley.
138. Lara, J. M. (1966). Computation of “Z’s” for use in the Modified Einstein Procedure. U.S. Department of the Interior, Bureau of Reclamation.
139. Lee, J. S. and P.Y. Julien (2006). Electromagnetic wave surface velocimeter. J. Hyd. Engr., ASCE, 132, no. 2, 146–53.
140. Liu, H. K. (1957). Mechanics of sediment-ripple formation. J. Hyd. Div. ASCE, 183, no. HY2, 1–23.
141. Long, Y. and G. Liang (1994). Database of sediment transport in the Yellow River. Tech. Rpt. No. 94001. Institute of Hydr. Research, Yellow River Conservation Comm., Zhengzhou, P. R. China, 15 p. (in Chinese).
142. Lowe, J., III and I. H. R. Fox (1982). Sedimentation in Tarbela Reservoir. Proc. 14th International Congress on Large Dams, Rio de Janeiro, 317–40.
143. Lucker, T. and V. Zanke (2007). An analytical solution for calculating the initiation of sediment motion. Intl. J. Sed. Res., 22, no. 2, 87–102.
144. Mantz, P.A. (1977). Incipient transport of fine grains and flakes by fluids-extended Shields diagram. J. Hyd. Eng., 103, no. 6, 601–16.
145. Meyer-Peter, E. and R. Müller (1948). Formulas for bed-load transport. Proc. 2nd Meeting IAHR, Stockholm, 39–64.
146. Migniot, C. (1989). Tassement et rhéologie des vases. La Houille Blanche, no. 1, 11–29.
147. Miller, C.R. (1953). Determination of the unit weight of sediment for use in sediment volume computations. Memorandum, U.S. Bureau of Reclamation, Department of the Interior, Denver, CO.
148. Mirtskhoulava, T. E. (1988). Basic Physics and Mechanics of Channel Erosion, transl. R. B. Zeidler. Leningrad: Gideometeoizdat.
149. Molnar, D. K. and P. Y. Julien (1998). Estimation of upland erosion using GIS. J. Computers & Geosciences, 24, no. 2, 183–192.
150. Murphy, P. J. and E. J. Aguirre (1985). Bed load or suspended load. J. Hyd. Div. ASCE, 111, no. 1, 93–107.
151. Neill, C. R. (1969). Bed forms in the lower Red Deer River, Alberta. J. Hydro., The Netherlandsno. 7, 58–85.
152. Nezu, I. and W. Rodi (1986). Open channel flow measurements with a laser Doppler anemometer. J. Hyd. Engr., ASCE, 112, no. 5, 335–55.
153. Nordin, C. F. (1963). Apreliminary study of sediment transport parameters, Rio Puerco near Bernardo, New Mexico. Professional Paper 462-C. Washington, D.C.: U.S. Geological Survey.
154. Nordin, C. F. (1964). Aspects of flow resistance and sediment transport: Rio Grande near Bernalillo, NM. Water Supply Paper 1498-H. Washington, D.C.: U.S. Geological Survey.
155. Nordin, C. F. and Dempster, G.R. (1963). Vertical distribution of velocity and suspended sediment, Middle Rio Grande, New Mexico. Professional Paper 462-B, Washington: U.S. Geological Survey.
156. O’Brien, J. S. and P.Y. Julien (1985). Physical properties and mechanics of hyperconcentrated sediment flows. Proc. ASCE Specialty Conference on the Delineation of Landslide, Flashflood and Debris Flow Hazards, Utah Water Research Lab, Series UWRL/G-85/03, 260–79.
157. O’Brien, J. S. and P.Y. Julien (1988). Laboratory analysis of mudflow properties. J. Hyd. Engr. ASCE, 114, no. 8, 877–87.
158. Oseen, C. (1927). Hydrodynamik. In Akademische Verlags Gesellschaft. Leipzig: AVG, chap. 10.
159. Parker, G., P. C. Klingeman and D.G. McLean (1982). Bedload and size distribution in paved gravel-bed streams. J. Hyd. Engr., 108, no. 4, 544–71.
160. Patel, P. L. and K.G. Ranga Raju (1999). Critical tractive stress for non uniform sediment. J. Hyd. Res., IAHR, 37 no. 1, 39–58.
161. Peters, J. J. (1978). Discharge and sand transport in the braided zone of the Zaïre estuary. J. Sea Res. The Netherlands12(3/4), 273–92.
162. Petersen, M. (1986). River Engineering. Englewood Cliffs, N.J.: Prentice-Hall.
163. Piest, R. F. and C. R. Miller (1977). Sediment sources and sediment yields. In Sedimentation Engineering, ASCE Manual and Reports on Engineering Practice no. 54. New York, Chaps. 4 and 5.
164. Pitlick, J. (1992). Flow resistance under conditions of intense gravel transport. In Water Resource Research, AGU, 891–903.
165. Posada-Garcia, L. (1995). Transport of sands in deep rivers. Ph.D. dissertation, Colorado State University, 157 p.
166. Qian, N. (1982). Reservoir sedimentation and slope stability, technical and environmental effects. General Report Q54, 14th International Congress on Large Dams, Rio de Janeiro, May 1982.
167. Qian, N. and Z. Wan (1986). A critical review of the research on the hyperconcentrated flow in China. Beijing: International Research and Training Centre on Erosion and Sedimentation.
168. Ranga Raju, K.G., R. J. Garde and R. C. Bhardwaj (1981). Total load transport in alluvial channels. J. Hyd. Div. ASCE, 107, no. HY2, 179–92.
169. Raudkivi, A. J. (1990). Loose Boundary Hydraulics, 3rd ed. New York: Pergamon Press.
170. Rayleigh, Lord. (1915). The principle of similitude. Nature, 95.
171. Richardson, E.V. and P.Y. Julien (1986). Bedforms, fine sediments, washload and sediment transport. Third International Symposium on River Sedimentation, ISRS-III, Jackson, Mississippi, 854–74.
172. Richardson, E.V., Simons, D. B., and P.Y. Julien (1990). Highways in the River Environment. Design and training manual for US Department of Transportation, Federal Highway Administration, publication no. FHWA-HI-90–016. Washington, D.C.
173. Richardson, E.V., Woo, H. S., and P.Y. Julien (1986). Research trends in sedimentation. In Proceedings of the Symposium on Megatrends in Hydraulic Engineering, ed. M. L. Albertson and C. N. Papadakis. Fort Collins: Colorado State University, 299–330.
174. Rojas, R., Julien, P.Y., Velleux, M., and B. E. Johnson (2008). Grid size effect on watershed soil erosion models. JHE, ASCE, 134, no. 9, 793–802.
175. Rouse, H. (1937). Modern conception of the mechanics of turbulence. Trans. ASCE, 102, 463–543.
176. Rouse, H. (ed.) (1959). Advanced Mechanics of Fluids. New York: Wiley.
177. Rubey, W. (1933). Settling velocities of gravel, sand and silt particles. Am. J. Sci., 25, no. 148, 325–38.
178. Ryan, S. E. and W.W. Emmett (2002). The nature of flow and sediment movement in Little Granite Creek near Bondurant, Wyoming, Report RMRS-GTR-90, 48 p.
179. Savage, S. B. and S. McKeown (1983). Shear stresses developed during rapid shear of concentrated suspension of large spherical particles between concentric cylinders. J. Fluid Mech., 137, 453–72.
180. Schlichting, H. (1968). Boundary Layer Theory. New York: McGraw-Hill.
181. Schoklitsch, A. (1934). Geschiebetreib und die geschiebefracht. Wasser Kraft und Wasser Wirtschaft. Jgg. 39, no. 4.
182. Schultz, E. F., R.H. Wilde, and M. L. Albertson (1954). Influence of shape on the fall velocity of sedimentary particles. Report of the Colorado Agricultural and Mechanical College, Fort Collins, CO MRD Sediment Series, no. 5.
183. Schwab, G. O., R. K. Frevert, T.W. Edminster, and K. K. Barnes (1981). Soil and Water Conservation Engineering, 3rd ed. New York: Wiley.
184. Sedov, L. I. (1959). Similarity and Dimensional Methods in Mechanics, transl. M. Hold. New York: Academic Press.
185. Shah-Fairbank, S. C. (2009). Series expansion of the Modified Einstein Method. Ph.D. dissertation, Colorado State University.
186. Shen, H.W. and C. S. Hung (1983). Remodified Einstein procedure for sediment load. J. Hyd. Div. ASCE, 109, no. 4, 565–78.
187. Shen, H.W. and P.Y. Julien (1993). Erosion and sediment transport. In Handbook of Hydrology. New York: McGraw-Hill, Chap. 12.
188. Shields, A. (1936). Anwendung der Aehnlichkeitsmechanik und der Turbulenzforschung auf die Geschiebebewegung. Berlin: Mitteilungen der Preussische Versuchanstalt für Wasserbau und Schiffbau.
189. Simons, D. B. (1957). Theory and design of stable channels in alluvial material. Ph.D. dissertation, Colorado State University.
190. Simons, D. B., and E.V. Richardson (1963). Form of bed roughness in alluvial channels. Trans. ASCE, 128, 284–323.
191. Simons, D. B., and E.V. Richardson (1966). Resistance to flow in alluvial channels. Professional Paper 422-J. Washington, D.C.: U.S. Geological Survey.
192. Simons, D. B. and F. Senturk (1977). Sediment Transport Technology. Littleton, CO: Water Resources Pub., 1977, revised, 1992.
193. Simons, D. B., R. M. Li, and W. Fullerton (1981). Theoretically derived sediment transport equations for Pima County, Arizona. Prepared for Pima County DOT and Flood Control District, Tucson, Ariz. Ft. Collins, Colo.: Simons, Li and Assoc.
194. Singamsetti, S. R. (1966). Diffusion of sediment in a submerged jet. J. Hyd. Div. ASCE, 92, no. 2, 153–68.
195. Smerdon, E.T. and R. P. Beasley (1961). Critical cohesive forces in cohesive soils. Agr. Eng., 42, 26–9.
196. Stevens, M.A. and D. B. Simons (1971). Stability analysis for coarse granular material on slopes. In River Mechanics. Littleton, Colo. Water Resources Pub., Chap. 17.
197. Streeter, V. L. (1971). Fluid Mechanics, 5th ed. New York: McGraw-Hill.
198. Thomas, W.A. (1976). Scour and deposition in rivers and reservoirs. Report no. 723-G2-L2470. Vicksburg, Miss.: US Army Corps of Engineers, Hydrology Engineering Center.
199. Toffaleti, F. B. (1968). A procedure for computation of the total river and sand discharge and detailed distribution, bed to surface. Technical Report no. 5. Vicksburg, Miss.: US Army Corps of Engineers, Committee on Channel Stabilization.
200. Tsujimoto, T. (1992). Fractional transport rate and fluvial sorting. Proc. Grain Sorting Seminar, Versuchanstalt für Wasserbau, Mitteilungen 117, ETH. Zurich, 227–49.
201. US Bureau of Reclamation (2006). Erosion and Sedimentation Manual. U.S. Govt. Printing Office, Washington, D.C. 20402–0001, 616 p.
202. van Rijn, L. C. (1984a). Sediment transport, Part II: Suspended load transport. J. Hyd. Div. ASCE, 110, no. 11, 1613–41.
203. van Rijn, L. C. (1984b). Sediment transport, Part III: Bedforms and alluvial roughness. J. Hyd. Div. ASCE, 110, no. 12, 1733–54.
204. Vanoni, V.A. (1946).Transportation of suspended sediment by water. Trans. ASCE, 3, paper no. 2267, 67–133.
205. Vanoni, V.A. and N. H. Brooks (1957). Laboratory studies of the roughness and suspended load of alluvial streams. Report E-68. Pasadena: California Institute of Technology, Sedimentation Laboratory.
206. Vanoni, V. A., N. H. Brooks, and J. F. Kennedy (1960). Lecture notes on sediment transportation and channel stability. Report KH-RI. Pasadena: California Institute of Technology, W. M. Keck Laboratory.
207. Velleux, M., Julien, P.Y., Rojas-Sanchez, R., Clements, W., and J. England (2006). Simulation of metals transport and toxicity at a mine-impacted watershed: California Gulch, Colorado. Environmental Science and Technology, 40, no. 22, 6996–7004.
208. Velleux, M., England Jr., J. F., and P.Y. Julien (2008). TREX: Spatially distributed model to assess watershed contaminant transport and fate. J. Science in the Total Environment, 404, 113–28.
209. Wargadalam, J. (1993) Hydraulic geometry equations of alluvial channels. Ph.D. dissertation, Colorado State University.
210. Waterways Experiment Station (1935). Studies of river bed materials and their movement with special reference to the lower Mississippi River. USWES, paper no. 17.Vicksburg, Miss.
211. Weinhold, M. (2002). Application of a site-calibrated Parker-Klingeman bedload transport model, Little Granite Creek, Wyoming. M.Sc. Colorado State University, 99 p.
212. White, F. M. (1974). Viscous Fluid Flow. McGraw-Hill, 725 p.
213. Whitehouse, J. S., R. L. Soulsby, and J. S. Damgaard (2000). Discussion Technical Note 17149, J. Hyd. Engr., ASCE, 126, no. 7, 553–5.
214. Wijbenga, J. H.A. (1991). Analyse prototype-metingen (niet-) permanente ruwheid. Report Q1302. Emmeloord: Delft Hydraulics.
215. Williams, D.T. and P.Y. Julien (1989). On the selection of sediment transport equations. J. Hyd. Engr. ASCE, 115, no. 11, 1578–81.
216. Williams, G. P. and Rosgen, D. L. (1989). Measured total sediment loads (suspended load and bed loads) for 93 United States Streams. 89–67, United States Geological Survey, Denver, CO.
217. Wilson, K. C. (1966). Bed-load transport at high shear stress. J. Hyd. Div. ASCE, 92, no. 6, 44–59.
218. Winterwerp, H. (1999). On the dynamics of high-concentrated mud suspensions. Report 99–3, Dept. Of Civil Engineering and Geosciences. Delft University of Technology.
219. Wischmeier, W.H. (1972). Upslope erosion analysis. In Environmental Impact on Rivers, ed. H.W. Shen. Littleton, Colo.: Water Resources Pub. Chap. 15.
220. Wischmeier, W.H. and D. D. Smith. (1978). Predicting Rainfall Erosion Losses: A Guide to Conservation Planning. USDA Agr. Handbook 537. Washington, D.C.: U.S. Department of Agriculture.
221. Woo, H. S. and P.Y. Julien (1990). Turbulent shear stress in heterogeneous sediment-laden flows. J. Hyd. Eng. ASCE, 116, no. 11, 1416–21.
222. Woo, H. S., Julien, P.Y., and E.V. Richardson (1986). Washload and fine sediment load. J. Hyd. Eng. ASCE, 112, no. 6, 541–5.
223. Woo, H. S., Julien, P.Y., and E.V. Richardson (1988). Suspension of large concentrations of sands. J. Hydr. Engr. ASCE, 114, no. 8, 888–98.
224. Wu, B. (1999). Fractional transport of bed-material load in sand-bed channels. Ph.D. dissertation, Colorado State University, 193 p.
225. Wu, B., A. Molinas, and P.Y. Julien (2004). Bed-material load computations for sediment mixtures. J. Hydr. Engr., ASCE, 130, no. 10, 1002–12.
226. Wu, W. and S. S.Y. Wang (2006). Formulas for sediment porosity and settling velocity. J. Hydr. Engr. ASCE, 132, no. 8, 858–62.
227. Yalin, M. S. (1964). Geometrical properties of sand waves. J. Hyd. Div. ASCE, 90, no. HY5, 105–19.
228. Yalin, M. S. (1977). Mechanics of Sediment Transport, 2nd ed. London: Pergamon Press.
229. Yalin, M. S. and E. Karahan (1979). Inception of sediment transport. J. Hyd. Div. ASCE, 105, no. HY11, 1433–43.
230. Yalin, M. S. and A. M. daSilva (2001). Fluvial Processes. IAHR Monograph, Balkema, 197 p.
231. Yang, C.T. (1973). Incipient motion and sediment transport. J. Hyd. Div. ASCE, 99, no. HY10, 1679–1704.
232. Yih, C. S. (1979). Fluid Mechanics. Ann Arbor, Mich.: West River Press.
233. Young, R.A. and C. K. Mutchler (1967). Soil movement on irregular slopes. Water Resources Res., 5, no. 5, 1084–5.
234. Yücel, O. and W. H. Graf (1973). Bed load deposition in reservoirs. Proc. 15th Congress of IAHR, Istanbul.
235. Zhou, D. and C. Mendoza (2005). Growth model for sand wavelets, J. Hydraul. Eng., ASCE, 131, no. 10, 866–76.
236. Zingg, A.W. (1940). Degree and length of land slope as it affects soil loss by runoff. Agricultural Engineering, 21, no. 2, 59–64.
237. Zyserman, J.A. and J. Fredsøe (1994). Data analysis of bed concentration of suspended sediment. J. Hyd. Div. ASCE, 128, no. HY9, 1021–42.