The Vibration Monitoring Methods and Signal Processing Techniques for Structural Health Monitoring: A Review

Archives of Computational Methods in Engineering

Volumn 23, Issue 4, 2016, Pages 585-594

  Goyal, D ^a   Pabla, B S ^a  

^a NATIONAL INSTITUTE OF TECHNICAL TEACHERS TRAINING AND RESEARCH   (India)

Author keywords

[No Author keywords available]

Indexed keywords

DECISION MAKING; MACHINE COMPONENTS; MACHINING CENTERS; MAINTENANCE; MANUFACTURE; MONITORING; QUALITY ASSURANCE; SIGNAL PROCESSING; VIBRATION ANALYSIS; VIBRATION MEASUREMENT; VIBRATIONS (MECHANICAL);

MAINTENANCE DECISIONS; MAINTENANCE STRATEGIES; MANUFACTURING OPERATIONS; MANUFACTURING PROCESS; NONCONTACT MEASUREMENTS; PRODUCTS AND SERVICES; SIGNAL PROCESSING TECHNIQUE; STATE-OF-THE ART REVIEWS;

STRUCTURAL HEALTH MONITORING;

EID: 84924401835     PISSN: 11343060     EISSN: 18861784     Source Type: Journal    
DOI: 10.1007/s11831-015-9145-0     Document Type: Article

References (81)

1. McMillan RB (2004) Rotating machinery: practical solutions to unbalance and misalignment. Fairmont Press, Lilburn
2. Tsang AH (1995) Condition-based maintenance: tools and decision making. J Qual Maint Eng 1(3):3–17
3. Meher-Homji CB (1995b) Blading vibration and failure in gas turbines part B: compressor and turbine airfoil distress. ASME paper no. 95-GT-419
4. Cao Y, Rong XL, Shao SJ, He KP (2012). Present situation and prospects of vibration sensors. In: Computer distributed control and intelligent environmental monitoring (CDCIEM), 2012 international conference on. IEEE, pp 515–518
5. Peng Z, Kessissoglou N (2003) An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis. Wear 255(7):1221–1232
6. Adeli H, Jiang X (2009) Intelligent infrastructure: neural networks, wavelets, and chaos theory for intelligent transportation systems and smart structures. CRC Press, Boca Raton
7. Fritzen CP, Balageas D, Güemes A (eds) (2006) Structural health monitoring, vol 493. ISTE, London
8. Speckmann H, Roesner H (2006) Structural health monitoring: a contribution to the intelligent aircraft structure. In: Proceeding of ECNDT
9. Doebling SW, Farrar CR, Prime MB, Shevitz DW (1996) Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review (No. LA–13070-MS). Los Alamos National Lab, NM
10. Castellini P, Martarelli M, Tomasini EP (2006) Laser doppler vibrometry: development of advanced solutions answering to technology’s needs. Mech Syst Signal Process 20(6):1265–1285
11. Carden EP, Fanning P (2004) Vibration based condition monitoring: a review. Struct Health Monit 3(4):355–377
12. Shah BM, Cannington JC, Ferko EJ, Kwon YS, Saunders SA, Phan N, Candela JM (2004) P-3C service life management. In: Proceedings of USAF ASIP conference
13. Altintas Y, Yellowley I, Tlusty J (1988) The detection of tool breakage in milling operations. J Manuf Sci Eng 110(3):271–277
14. Rao SS (1995) Mechanical vibrations. Addison-Wesley, Boston
15. Tandon N, Parey A (2006) Condition monitoring of rotary machines. In: Wang L, Gao RX (eds) Condition monitoring and control for intelligent manufacturing. Springer, London, pp 109–136
16. Wang L, Gao RX (2006) Condition monitoring and control for intelligent manufacturing. Springer, Berlin
17. Scheffer C, Girdhar P (2004) Practical machinery vibration analysis and predictive maintenance. Elsevier, Amsterdam
18. Snr D, Dimla E (2000) Sensor signals for tool-wear monitoring in metal cutting operations—a review of methods. Int J Mach Tools Manuf 40(8):1073–1098
19. Jantunen E (2002) A summary of methods applied to tool condition monitoring in drilling. Int J Mach Tools Manuf 42(9):997–1010
20. Rao JS, Gupta K (1999) Introductory course on theory and practice of mechanical vibrations. New Age International, Seborga
21. Randall RB (2011) Vibration-based condition monitoring: industrial, aerospace and automotive applications. Wiley, London
22. Cusido J, Romeral L, Ortega JA, Rosero JA, Garcia Espinosa A (2008) Fault detection in induction machines using power spectral density in wavelet decomposition. IEEE Trans Ind Electro 55(2):633–643
23. Bolton W (2003) Mechatronics: electronic control systems in mechanical and electrical engineering. Pearson Education, Upper Saddle River
24. Terpay GW, Zipfel Jr GG (1999) Measuring blade condition in a gas turbine engine using eddy-currents. In: Ninth international conference on adaptive structures and technologies. October 14–16, 1998, Boston, CRC, p 71
25. Dowell M, Sylvester G (1999) Turbomachinery prognostics and health management via eddy current sensing: current developments. In: Aerospace conference, 1999. Proceedings 1999 IEEE, vol 3, IEEE, pp 1–9
26. Adams ML (2000) Rotating machinery vibration: from analysis to troubleshooting, vol 131. CRC Press, Boca Raton
27. Restagno F, Crassous J, Charlaix E, Monchanin M (2001) A new capacitive sensor for displacement measurement in a surface-force apparatus. Meas Sci Technol 12(1):16
28. Lawson CP, Ivey PC (2005) Tubomachinery blade vibration amplitude measurement through tip timing with capacitance tip clearance probes. Sens Actuators, A 118(1):14–24
29. Zhao-Hua W (2006) Capacitive sensor based on active bridge circuit and its measurement system. Beijing University of Chemical Technology Master Degree Thesis, 11
30. Li MG, Sun RX, Li Y (2008) Research on vibration sensor of ultra low frequency. Colliery Mech Electr Technol 3:012
31. Bruel and Kjaer (1984) Mechanical vibration and shock measurements. Bruel and Kjaer, Denmark, pp 97–120
32. Silva RG, Reuben RL, Baker KJ, Wilcox SJ (1998) Tool wear monitoring of turning operations by neural network and expert system classification of a feature set generated from multiple sensors. Mech Syst Signal Process 12(2):319–332
33. Dimla DE, Lister PM (2000) On-line metal cutting tool condition monitoring. I: force and vibration analyses. Int J Mach Tools Manuf 40(5):739–768
34. Trejo-Hernandez M, Osornio-Rios RA, Romero-Troncoso RDJ, Rodriguez-Donate C, Dominguez-Gonzalez A, Herrera-Ruiz G (2010) FPGA-based fused smart-sensor for tool-wear area quantitative estimation in CNC machine inserts. Sensors 10(4):3373–3388
35. Bouche RR (1979) Calibration of shock and vibration measuring transducers (No. SVM-11). Shock and Vibrations Information Centre, Washington
36. Fu-Cheng X (2008) Common vibration sensor and its typical application circuit. Pract Electron 10:13–15
37. Tatar K (2006) Machine tool vibrations and violin sound fields studied using laser vibrometry. Doctoral dissertation, Lulea University of Technology
38. Righini GC (ed) (2009) An introduction to optoelectronic sensors. World Scientific, Singapore
39. Stanbridge AB, Ewins DJ (1999) Modal testing using a scanning laser doppler vibrometer. Mech Syst Signal Process 13(2):255–270
40. Khan AZ, Stanbridge AB, Ewins DJ (2000) Detecting damage in vibrating structures with a scanning LDV. Opt Lasers Eng 32(6):583–592
41. Vass J, Smíd R, Randall RB, Sovka P, Cristalli C, Torcianti B (2008) Avoidance of speckle noise in laser vibrometry by the use of kurtosis ratio: application to mechanical fault diagnostics. Mech Syst Signal Process 22(3):647–671
42. Rytter A, Kirkegaard PH (1994) Vibration based inspection of civil engineering structures. Aalborg Universitetsforlag, Aalborg
43. Park G, Muntges DE, Inman DJ (2001) Self-monitoring and self-healing jointed structures. Key Eng Mater 204:75–84
44. Khemili I, Chouchane M (2005) Detection of rolling element bearing defects by adaptive filtering. Eur J Mech-A/Solids 24(2):293–303
45. Maeck J, Abdel Wahab M, Peeters B, De Roeck G, De Visscher J, De Wilde WP et al (2000) Damage identification in reinforced concrete structures by dynamic stiffness determination. Eng Struct 22(10):1339–1349
46. Friswell MI, Penny JET (1997) Is damage location using vibration measurements, practical. In: Proceedings of EUROMECH 365 international workshop: DAMAS, vol 97
47. Li CJ (2006) Signal processing in manufacturing monitoring. In: Wang L, Gao RX (eds) Condition monitoring and control for intelligent manufacturing. Springer, London, pp 245–265
48. Amezquita-Sanchez JP, Adeli H (2014) Signal processing techniques for vibration-based health monitoring of smart structures. Arch Comput Methods Eng. doi:10.1007/s11831-014-9135-7
49. Sohn H, Farrar CR (2001) Damage diagnosis using time series analysis of vibration signals. Smart Mater Struct 10(3):446
50. Liang SY, Dornfeld DA (1989) Tool wear detection using time series analysis of acoustic emission. J Manuf Sci Eng 111(3):199–205
51. Aghdam BH, Vahdati M, Sadeghi MH (2014) Vibration-based estimation of tool major flank wear in a turning process using ARMA models. Int J Adv Manuf Technol 76(9–12):1631–1642
52. Liu ZG, Cai ZJ, Tan XM (2011) Forecasting research of aero-engine rotate speed signal based on ARMA model. Proced Eng 15:115–121
53. Papoulis A, Pillai SU (2002) Probability, random variables, and stochastic processes. Tata McGraw-Hill Education, Noida
54. Dyer D, Stewart RM (1978) Detection of rolling element bearing damage by statistical vibration analysis. J Mech Des 100(2):229–235
55. Amezquita-Sanchez JP, Osornio-Rios RA, Romero-Troncoso RJ, Dominguez-Gonzalez A (2012) A hardware–software system for simulating and analyzing earthquakes applied to civil structures. Nat Hazards Earth Syst Sci 12(1):61–73
56. Lee J, Kim S (2007) Structural damage detection in the frequency domain using neural networks. J Intell Mater Syst Struct 18:785–792
57. Cheraghi N, Zou GP, Taheri F (2005) Piezoelectric-based degradation assessment of a pipe using fourier and wavelet analyses. Comput-Aided Civil Infrastruct Eng 20(5):369–382
58. Shin YS, Jeon JJ (1993) Pseudo Wigner–Ville time–frequency distribution and its application to machinery condition monitoring. Shock Vib 1(1):65–76
59. Qian S, Chen D (1996) Joint time–frequency analysis: methods and applications. Prentice Hall Inc, Englewood Cliffs
60. Cohen L (1995) Time–frequency analysis, vol 778. Prentice Hall PTR, Englewood Cliffs
61. Yinfeng D, Yingmin L, Mingkui X, Ming L (2008) Analysis of earthquake ground motions using an improved Hilbert–Huang transform. Soil Dyn Earthq Eng 28(1):7–19
62. Nagata Y, Iwasaki S, Hariyama T, Fujioka T, Obara T, Wakatake T, Abe M (2009) Binaural localization based on weighted Wiener gain improved by incremental source attenuation. IEEE Trans Audio Speech Lang Process 17(1):52–65
63. Yesilyurt I, Gursoy H (2013) Estimation of elastic and modal parameters in composites using vibration analysis. J Vib Control. doi:10.1177/1077546313486275
64. Gade S, Gram-Hansen K (1996) Non-stationary signal analysis using wavelet transform, short-time Fourier transform and Wigner–Ville distribution. Tech Rev 2, Bruel & Kjaer
65. Amezquita-Sanchez JP, Garcia-Perez A, Romero-Troncoso RJ, Osornio-Rios RA, Herrera-Ruiz G (2012) High-resolution spectral-analysis for identifying the natural modes of a truss-type structure by means of vibrations. J Vib Control. doi:10.1177/1077546312456228
66. Cohen L (1966) Generalized phase-space distribution functions. J Math Phys 7(5):781–786
67. Huang NE, Shen Z, Long SR, Wu MC, Shih HH, Zheng Q et al (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc Lond Ser A: Math Phys Eng Sci 454(1971):903–995
68. Choi HI, Williams WJ (1989) Improved time–frequency representation of multicomponent signals using exponential kernels. IEEE Trans Acoust Speech Signal Process 37(6):862–871
69. Chiollaz M, Favre B (1993) Engine noise characterization with Wigner–Ville time–frequency analysis. Mech Syst Signal Process 7(5):375–400
70. Staszewski WJ, Worden K, Tomlinson GR (1997) Time–frequency analysis in gearbox fault detection using the Wigner–Ville distribution and pattern recognition. Mech Syst Signal Process 11(5):673–692
71. Claasen TACM, Mecklenbrauker WFG (1980) The Wigner distribution—a tool for time–frequency signal analysis. Part I: continuous-time signals. Philips J Res 35(3):217–250
72. Baydar N, Ball A (2001) A comparative study of acoustic and vibration signals in detection of gear failures using Wigner–Ville distribution. Mech Syst Signal Process 15(6):1091–1107
73. Zou J, Chen J (2004) A comparative study on time–frequency feature of cracked rotor by Wigner–Ville distribution and wavelet transform. J Sound Vib 276(1):1–11
74. Mallat SG (1989) A theory for multiresolution signal decomposition: the wavelet representation. IEEE Trans Pattern Anal Mach Intell 11(7):674–693
75. Newland DE (2007) Wavelet analysis of vibration signals. Wiley, London, pp 585–597
76. Bogert BP, Healy MJR, Tukey JW (1963) The quefrency alanysis of time series for echoes: cepstrum pseudo-autocovariance, cross-cepstrum and saphe cracking. In: Rosenblatt M (ed) Proceedings of the symposium on time series analysis. Wiley, New York, pp 209–243
77. Randall RB (1973) Cepstrum analysis and gearbox fault diagnosis. Bruel and Kjaer, Denmark
78. Yang B, Suh CS (2004) Interpretation of crack-induced rotor non-linear response using instantaneous frequency. Mech Syst Signal Process 18(3):491–513
79. Yang JN, Lei Y (2000) System identification of linear structures using Hilbert transform and empirical mode decomposition. In: SPIE proceedings series. Society of photo-optical instrumentation engineers, pp 213–219
80. Peng ZK, Tse PW, Chu FL (2005) An improved Hilbert–Huang transform and its application in the vibration signal analysis. J Sound Vib 286(1):187–205
81. Dequeiroz RL, Rao KR (1993) Time-varying lapped transforms and wavelet packets. IEEE Trans Signal Process 41(12):3293–3305