In-process modal parameter identification for spindle health monitoring

Mechatronics

Volumn 31, Issue , 2015, Pages 42-49

  Yan, Ruqiang ^a   Gao, Robert X ^b   Zhang, Li ^c  

^a SOUTHEAST UNIVERSITY   (China)

^b UNIVERSITY OF CONNECTICUT   (United States)

^c GENERAL ELECTRIC COMPANY   (United States)

Author keywords

Health monitoring; Non intrusive testing; Spindle dynamics; Stochastic subspace identification

Indexed keywords

COMPOSITE BEAMS AND GIRDERS; HEALTH; MODAL ANALYSIS; STOCHASTIC SYSTEMS;

HEALTH CONDITION; HEALTH MONITORING; LOADING CONDITION; MODAL PARAMETER IDENTIFICATION; MODAL PARAMETERS; NON-INTRUSIVE; STOCHASTIC SUBSPACE IDENTIFICATION; STRUCTURAL EXCITATION;

PARAMETER ESTIMATION;

EID: 84923925185     PISSN: 09574158     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechatronics.2014.12.005     Document Type: Article

References (39)

1. C.J. Wilson, and D.B. Bogy An experimental modal analysis technique for miniature structures ASME J Vib Acoust 118 1 1996 1 9
2. N. Okubo, and Y. Yoshida Application of modal analysis to machine tool structures Ann CIRP 31 1 1982 243 246
3. T.L. Schmitz Predicting high-speed machining dynamics by substructure analysis Ann CIRP 49 1 2000 303 308
4. E. Budak, A. Ertürk, and H.N. Özgüven A modeling approach for analysis and improvement of spindle-holder-tool assembly dynamics Ann CIRP 55 1 2006 369 372
5. S. Smith, and J. Snyder A cutting performance based template for spindle dynamics Ann CIRP 50 1 2001 259 262
6. S.S. Park, and Y. Altintas Dynamic compensation of spindle integrated force sensors with Kalman filter ASME J Dyn Syst Meas Control 126 3 2004 443 452
7. N. Akturk Some characteristic parameters affecting the natural frequency of a rotating shaft supported by defect free ball bearings Proc Inst Mech Eng K: J Multi-body Dyn 217 2 2003 145 151
8. M.A. Alfares, and A.A. Elsharkawy Effects of axial preloading of angular contact ball bearings on the dynamics of a grinding machine spindle system J Mater Process Technol 136 1-3 2003 48 59
9. Zhang L, Yan RQ, Gao R, Lee K. Open architecture software design for online spindle health monitoring. In: Proceedings of the IEEE measurement and technology conference. Warsaw, Poland; 2007. p. 1-6.
10. T.L. Schmitz, J. Ziegert, and C. Stanislaus A method for predicting chatter stability for systems with speed-dependent spindle dynamics Trans NAMRI/SME 32 2004 17 24
11. James GH, Carne TG, Lauffer JP, Nord AR. Modal testing using natural excitation. In: Proceedings of the 10th international modal analysis conference, San Diego, CA, USA; 1992. p. 1209-16.
12. G.H. James, T.G. Carne, and J.P. Lauffer The natural excitation technique (Next) for modal parameter extraction from operating structures Int J Anal Exp Modal Anal 10 4 1995 260 277
13. F. Tasker, A. Bosse, and S. Fisher Real-time modal parameter estimation using subspace methods: theory Mech Syst Signal Process 12 6 1998 797 808
14. W. Ren, and Z. Zong Output-only modal parameter identification of civil engineering structures Struct Eng Mech 19 3-4 2004 1 16
15. B.H. Kim, N. Stubbs, and T. Park A new method to extract modal parameters using output-only responses J Sound Vib 282 1-2 2005 215 230
16. J. Fan, Z. Zhang, and H. Hua Data processing in subspace identification and modal parameter identification of an arch bridge Mech Syst Signal Process 21 4 2007 1674 1689
17. W. Liu, W. Gao, and Y. Sun Application of modal identification methods to spatial structure using field measurement data ASME J Vib Acoust 131 3 2009 034503-1 034503-10
18. B. Peeters, and G. De Roeck Reference-based stochastic subspace identification for output-only modal analysis Mech Syst Signal Process 13 6 1999 855 878
19. Brincker R, Zhang L, Andersen P. Modal identification from ambient response using frequency domain decomposition. In: Proceedings of the 18th international modal analysis conference, San Antonio, TX, USA; 2000. p. 625-30.
20. Ibraham SR. Efficient random decrement computation for identification of ambient responses. In: Proceedings of the 19th international modal analysis conference, Orlando, FL, USA; 2001. p. 698-703.
21. L. Hermans, and H. Van Der Auweraer Model testing and analysis of structures under operational conditions: industrial applications Mech Syst Signal Process 13 2 1999 193 216
22. L. Mevel, and M. Goursat Stochastic subspace-based structural identification and damage detection and localization - application to the Z24 bridge benchmark Mech Syst Signal Process 17 1 2003 143 151
23. S.A.N. Sarmadi, and V. Venkatasubramanian Electromechanical mode estimation using recursive adaptive stochastic subspace identification IEEE Trans Power Syst 29 1 2014 349 358
24. M. Basseville, M. Basseville, A. Benveniste, M. Goursat, L. Hermans, L. Mevel, and et al. Output-only subspace-based structural identification: from theory to industrial testing practice ASME J Dyn Syst Meas Control 23 4 2001 668 676
25. L. Mevel, A. Benveniste, M. Basseville, M. Goursat, B. Peeters, H. Van der Auweraer, and et al. Input/output versus output-only data processing for structural identification - application to in-flight data analysis J Sound Vib 295 3-5 2006 531 552
26. E. Mrabet, M. Abdelghani, and N. Ben Kahla A new criterion for the stabilization diagram used with stochastic subspace identification methods: an application to an aircraft skeleton Shock Vib 2014 409298
27. Schedligski C, Lüscher M. Application of classical and output-only modal analysis to a laser cutting machine. In: Proceedings of international conference on noise and vibration engineering, Leuven, Belgium; 2002. p. 1273-9.
28. Kushnir E. Application of operational modal analysis to a machine tool testing. In: Proceeding of ASME international mechanical engineering congress and exposition, Anaheim, CA, USA; 2004. p. 57-62.
29. B. Li, H. Cai, X.Y. Mao, J.B. Huang, and B. Luo Estimation of CNC machine-tool dynamic parameters based on random cutting excitation through operational modal analysis Int J Mach Tools Manuf 71 2013 26 40
30. M. Ozbek, F. Meng, and D.J. Rixen Challenges in testing and monitoring the in-operation vibration characteristics of wind turbines Mech Syst Signal Process 41 2013 649 666
31. M.W. Haeckell, and R. Rolfes Monitoring a 5 MW offshore wind energy converter-condition parameters and triangulation based extraction of modal parameters Mech Syst Signal Process 40 1 2013 322 343
32. X.F. Dong, J.J. Lian, M. Yang, and H.J. Wang Operational modal identification of offshore wind turbine structure based on modified stochastic subspace identification method considering harmonic interference J Renew Sustain Energy 6 3 2014 033128
33. J.C. Brendelson, and A.K. Dhingra Stochastic subspace identification applied to the weave mode of motorcycles ASME J Dyn Syst Meas Control 135 2 2013 021019
34. B. Peeters, and G. De Roeck Stochastic system identification for operational modal analysis: a review ASME J Dyn Syst Meas Control 123 4 2001 659 667
35. Ibrahim SR, Brincker R, Asmussen JC. Modal parameter identification from responses of general unknown random inputs. In: Proceedings of the 14th International Modal Analysis Conference, Dearborn, MI, USA; February 1996. p. 446-452.
36. Richardson MH, Formenti DL. Parameter estimation from frequency response measurements using rational fraction polynomials. In: Proceedings of the first international modal analysis conference, Orlando, FL, USA; 1982. p. 167-81.
37. L. Zhang, R. Gao, and K. Lee Spindle health diagnosis based on analytic wavelet enveloping IEEE Trans Instrum Meas 55 5 2006 1850 1858
38. Y. Altintas, and Y. Cao Virtual design and optimization of machine tool spindles Ann CIRP 54 1 2005 379 382
39. E. Abele, and U. Fiedler Creating stability lobe diagrams during milling Ann CIRP 53 1 2004 309 313