A real-time study of the benefits of co-solvents in polymer solar cell processing

Nature Communications

Volumn 6, Issue , 2015, Pages

  Van Franeker, Jacobus J ^a   Turbiez, Mathieu ^a,b   Li, Weiwei ^c   Wienk, Martijn M ^a,d   Janssen, René A J ^a,b  

^a EINDHOVEN UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b DUTCH POLYMER INSTITUTE DPI   (Netherlands)

^c CIBA GEIGY LTD   (Switzerland)

^d INSTITUTE OF CHEMISTRY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

FULLERENE; POLYMER; SOLVENT;

FUEL CELL; POLYMER; SOLVENT;

ARTICLE; EVAPORATION; LIGHT SCATTERING; LIQUID LIQUID EXTRACTION; MEASUREMENT; OPTICS; PHASE SEPARATION; SEMICONDUCTOR; SOLID;

EID: 84923076303     PISSN: None     EISSN: 20411723     Source Type: Journal    
DOI: 10.1038/ncomms7229     Document Type: Article

References (42)

1. Liu, Y. et al. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells. Nat. Commun. 5, 5293 (2014).
2. Grossiord, N., Kroon, J. M., Andriessen, R. & Blom, P. W. M. Degradation mechanisms in organic photovoltaic devices. Org. Electron. 13, 432-456 (2012).
3. Gevorgyan, S. A. et al. An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules. Sol. Energ. Mat. Sol. C 95, 1398-1416 (2011).
4. Krebs, C. K. All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps. Org. Electron. 10, 761-768 (2009).
5. Galagan, Y. ITO-free flexible organic solar cells with printed current collecting grids. Sol. Energ. Mat. Sol. C 95, 1339-1343 (2011).
6. Chueh, C. Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells. Energy Environ. Sci. 6, 3241-3248 (2013).
7. Chen, Y., Zhang, S., Wu, Y. & Hou, J. Molecular design and morphology control towards efficient polymer solar cells processed using non-aromatic and non-chlorinated solvents. Adv. Mater. 26, 2744-2749 (2014).
8. Liao, H. et al. Additives for morphology control in high-efficiency organic solar cells. Mater. Today 16, 326-336 (2013).
9. Liu, F., Gu, Y., Jung, J. W., Jo, W. H. & Russell, T. P. On the morphology of polymer-based photovoltaics. J. Polym. Sci. B Polym. Phys. 50, 1018-1044 (2012).
10. Lee, J. K. et al. Processing Additives for improved efficiency from bulk heterojunction solar cells. J. Am. Chem. Soc. 130, 3619-3623 (2008).
11. Peet, J. et al. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols. Nat. Mater. 6, 497-500 (2007).
12. Gu, Y., Wang, C. & Russell, T. P. Multi-length-scale morphologies in PCPDTBT/PCBM bulk-heterojunction solar cells. Adv. Energy Mater. 2, 683-690 (2012).
13. Peet, J., Cho, N. S., Lee, S. K. & Bazan, G. C. Transition from solution to the solid state in polymer solar cells cast from mixed solvents. Macromolecules 41, 8655-8659 (2008).
14. Nilsson, S., Bernasik, A., Budkowski, A. & Moons, E. Morphology and phase segregation of spin-casted films of polyfluorene/PCBM blends. Macromolecules 40, 8291-8301 (2007).
15. Kouijzer, S. et al. Predicting morphologies of solution processed polymer:fullerene blends. J. Am. Chem. Soc. 135, 12057-12067 (2013).
16. He, Z. et al. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure. Nat. Photon. 6, 591-595 (2012).
17. Collins, B. A. et al. Absolute measurement of domain composition and nanoscale size distribution explains performance in PTB7:PC71BM solar cells. Adv. Energy Mater. 3, 65-74 (2013).
18. Liu, F. et al. Understanding the morphology of PTB7:PCBM blends in organic photovoltaics. Adv. Energy Mater. 4, 1301377 (2014).
19. Hedley, G. J. et al. Determining the optimum morphology in high-performance polymer-fullerene organic photovoltaic cells. Nat. Commun. 4, 2867 (2013).
20. Li, W. et al. Effect of the fibrillar microstructure on the efficiency of high molecular weight diketopyrrolopyrrole-based polymer solar cells. Adv. Mater. 26, 1565-1570 (2013).
21. Bijleveld, J. C. et al. Efficient solar cells based on an easily accessible diketopyrrolopyrrole polymer. Adv. Mater. 22, E242-E246 (2010).
22. Amb, C. M. et al. Dithienogermole as a fused electron donor in bulk heterojunction solar cells. J. Am. Chem. Soc. 133, 10062-10065 (2011).
23. Small, C. E. et al. High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells. Nat. Photon. 6, 115-120 (2012).
24. Wang, D. H. et al. Effect of processing additive on morphology and charge extraction in bulk-heterojunction solar cells. J. Mater. Chem. A 2, 15052-15057 (2014).
25. Bartelt, J. A. et al. Controlling solution-phase polymer aggregation with molecular weight and solvent additives to optimize polymer-fullerene bulk heterojunction solar cells. Adv. Energy Mater. 4, 1301733 (2014).
26. Stalder, R. et al. An isoindigo and dithieno[3,2-b:20,30-d]silole copolymer for polymer solar cells. Polym. Chem. 3, 89-92 (2012).
27. Schmidt, K. et al. A mechanistic understanding of processing additive-induced efficiency enhancement in bulk heterojunction organic solar cells. Adv. Mater. 26, 300-305 (2014).
28. Gao, J. et al. Elucidating double aggregation mechanisms in the morphology optimization of diketopyrrolopyrrole-based narrow bandgap polymer solar cells. Adv. Mater. 26, 3142-3147 (2014).
29. Liu, F. et al. Efficient polymer solar cells based on a low bandgap semicrystalline DPP polymer-PCBM blends. Adv. Mater. 24, 3947-3951 (2012).
30. Lou, S. J. et al. Effects of additives on the morphology of solution phase aggregates formed by active layer components of high-efficiency organic solar cells. J. Am. Chem. Soc. 133, 20661-20663 (2011).
31. Chou, K. W. et al. Spin-cast bulk heterojunction solar cells: A dynamical investigation. Adv. Mater. 25, 1923-1929 (2013).
32. Shin, N., Richter, L. J., Herzin, A. A., Kline, R. J. & DeLongchamp, D. M. Effect of processing additives on the solidification of blade-coated polymer/fullerene blend films via in-situ structure measurements. Adv. Energy Mater. 3, 938-948 (2013).
33. Schmidt-Hansberg et al. Moving through the phase diagram: Morphology formation in solution cast polymer-fullerene blend films for organic solar cells. ACS Nano 5, 8579-8590 (2011).
34. Pearson, A. J. et al. Morphology development in amorphous polymer:fullerene photovoltaic blend films during solution casting. Adv. Funct. Mater. 24, 659-667 (2013).
35. Hendriks, K. H., Heintges, G. H. L., Gevaerts, V. S., Wienk, M. M. & Janssen, R. A. J. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells. Angew. Chem. Int. Ed. 52, 8341-8344 (2013).
36. Gevaerts, V. S., Furlan, A., Wienk, M. M., Turbiez, M. & Janssen, R. A. J. Solution processed polymer tandem solar cell using efficient small and wide band gap polymer:fullerene blends. Adv. Mater. 24, 2130-2134 (2012).
37. Maturová, K., van Bavel, S. S., Wienk, M. M., Janssen, R. A. J. & Kemerink, M. Morphological device model for organic bulk heterojunction solar cells. Nano Lett. 9, 3032-3037 (2009).
38. Heriot, S. Y. & Jones, R. A. L. An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films. Nat. Mater. 4, 782-786 (2005).
39. Wienk, M. M., Turbiez, M., Gilot, J. & Janssen, R. A. J. Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: the effect of processing on the performance. Adv. Mater. 20, 2556-2560 (2008).
40. Kim, J. et al. A thienylenevinylene-phthalimide copolymer based polymer solar cell with high open circuit voltage: effect of additive concentration on the open circuit voltage. Sol. Energ. Mater. Sol. C 125, 253-260 (2014).
41. Duong, D. T. et al. Molecular solubility and Hansen solubility parameters for the analysis of phase separation in bulk heterojunctions. J. Polym. Sci. B Polym. Phys. 50, 1405-1413 (2012).
42. Chen, Y., Zhang, S., Wu, Y. & Hou, J. Molecular design and morphology control towards efficient polymer solar cells processed using non-aromatic and non-chlorinated solvents. Adv. Mater. 26, 2744-2749 (2014).