Evaluation of PC-ISO for customized, 3D printed, gynecologic 192Ir HDR brachytherapy applicators

Journal of Applied Clinical Medical Physics

Volumn 16, Issue 1, 2015, Pages 246-253

  Cunha, J Adam M ^a   Mellis, Katherine ^a   Sethi, Rajni ^a   Siauw, Timmy ^a   Sudhyadhom, Atchar ^a   Garg, Animesh ^b   Goldberg, Ken ^a,b   Hsu, I Chow ^a   Pouliot, Jean ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

^b UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

3D printing; Brachytherapy; Custom applicators; Radiochromic film; Sterilization

Indexed keywords

IRIDIUM;

BRACHYTHERAPY; COMPUTER ASSISTED RADIOTHERAPY; COMPUTER ASSISTED TOMOGRAPHY; COMPUTER SIMULATION; DEVICES; EVALUATION STUDY; FEMALE; FILM DOSIMETER; GENITAL NEOPLASMS, FEMALE; HUMAN; INTENSITY MODULATED RADIATION THERAPY; MONTE CARLO METHOD; PROCEDURES; RADIATION DOSE;

BRACHYTHERAPY; COMPUTER SIMULATION; FEMALE; FILM DOSIMETRY; GENITAL NEOPLASMS, FEMALE; HUMANS; IRIDIUM RADIOISOTOPES; MONTE CARLO METHOD; RADIOTHERAPY DOSAGE; RADIOTHERAPY PLANNING, COMPUTER-ASSISTED; RADIOTHERAPY, INTENSITY-MODULATED; TOMOGRAPHY, X-RAY COMPUTED;

EID: 84922883795     PISSN: None     EISSN: 15269914     Source Type: Journal    
DOI: 10.1120/jacmp.v16i1.5168     Document Type: Article

References (32)

1. Garg A, Patil S, Siauw T, et al. An algorithm for computing customized 3D printed implants with curvature constrained channels for enhancing intracavitary brachytherapy radiation delivery. In: 2013 IEEE International Conference on Automation Science and Engineering (CASE). Piscataway, NJ: IEEE, 2013. p. 466-73.
2. Perez M, Block M, Espalin D, et al. Sterilization of FDM-manufactured parts. Presented at the Twenty-third Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, 6-8 August 2011. Austin, TX: Laboratory for Solid Freeform Fabrication; 2012.
3. Albano M, Dumas I, Haie-Meder C. [Brachytherapy at the Institut Gustave-Roussy: personalized vaginal mould applicator: technical modification and improvement] [article in French]. Cancer Radiother. 2008;12(8):822-26.
4. Poulsen M, Lindsay C, Sullivan T, DUrso P. Stereolithographic modelling as an aid to orbital brachytherapy. Int J Radiat Oncol Biol Phys. 1999;44(3):731-35.
5. Zemnick C, Woodhouse SA, Gewanter RM, Raphael M, Piro JD. Rapid prototyping technique for creating a radiation shield. J Prosthet Dent. 2007;97(4):236-41.
6. Chow LK and Cheung LK. The usefulness of stereomodels in maxillofacial surgical management. J Oral Maxillofac Surg. 2007;65(11):2260-68.
7. Novakova-Marcincinova L and Novak-Marcincin J. Experimental testing of materials used in fused deposition modeling rapid prototyping technology. Adv Mat Res. 2013;740:597-602.
8. Cohen A, Laviv A, Berman P, Nashef R, Abu-Tair J. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2009;108(5):661-66.
9. Guix B, Finestres F, Tello JI, et al. Treatment of skin carcinomas of the face by high-dose-rate brachytherapy and custom-made surface molds. Int J Radiat Oncol Biol Phys. 2000;47(1):95-102.
10. Obinata K, Ohmori K, Shirato H, Nakamura M. Experience of high-dose-rate brachytherapy for head and neck cancer treated by a customized intraoral mold technique. Radiat Med. 2007;25(4):181-86.
11. Bassoli E, Gatto A, Iuliano L, Violante MG. 3D printing technique applied to rapid casting. Rapid Prototyping J. 2007;13(3):148-55.
12. Rengier F, Mehndiratta A, von Tengg-Kobligk H, et al. 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg. 2010;5(4):335-41.
13. Anchieta M, Quaresma M, de Salles F. Rapid prototyping applied to maxillofacial surgery. Advanced Applications of Rapid Prototyping Technology in Modern Engineering. InTech (www.intechopen.com). 2011:153-72.
14. Schrank ES, Hitch L, Wallace K, Moore R, Stanhope SJ. Assessment of a virtual functional prototyping process for the rapid manufacture of passive-dynamic ankle-foot orthoses. J Biomechan Eng. 2013;135(10):101011.
15. Winder J and Bibb R. Medical rapid prototyping technologies: state of the art and current limitations for application in oral and maxillofacial surgery. J Oral Maxillofac Surg. 2005;63(7):1006.
16. J. Winder, Cooke RS, Gray J, Fannin T, Fegan T. Medical rapid prototyping and 3D CT in the manufacture of custom made cranial titanium plates. J Med Eng Tech. 1999;23(1):26-28.
17. Choi JY, Choi JH, Kim NK, et al. Analysis of errors in medical rapid prototyping models. Int J Oral Maxillofac Surg. 2002;31(1):23-32.
18. Webb P. A review of rapid prototyping (RP) techniques in the medical and biomedical sector. J Med Eng Tech. 2000;24(4):149-53.
19. Schwaderer E, Bode A, Budach W, et al. Soft-tissue stereolithographic model as an aid to brachytherapy. Medicamundi. 2000;44(1):48-51.
20. Juang T, Stauffer P, Neuman D, Schlor J. Multilayer conformal applicator for microwave heating and brachytherapy treatment of superficial tissue disease. Int J Hyperthermia. 2006;22(7):527-44.
21. Pompeu-Robinson A, Kunz M, Falkson C, Schreiner L, Joshi C, Fichtinger G. Immobilization and catheter guidance for breast brachytherapy. Int J Comput Assist Radiol Surg. 2012;7(1):65-72.
22. Mutic S, Grigsby PW, Low DA, et al. PET-guided three-dimensional treatment planning of intracavitary gynecologic implants. Int J Radiat Oncol Biol Phys. 2002;52(4):1104-10.
23. Maalej M, Ben Ammar C, Kochbati L, et al. Brachytherapy for primary and recurrent nasopharyngeal carcinoma: treatment techniques and results. Cancer Radiother. 2007;11(3):117-21.
24. Makni N, Iancu A, Puech P, Mordon S, Betrouni N. A morphological atlas of prostates zonal anatomy for construction of realistic digital and physical phantoms. Prostate Cancer Imaging. 2011; LNCS 6963:22-34.
25. Wiebe E, Thomas G, Barbera L, Easton H, Ravi A. Customized vaginal vault brachytherapy with CT imaging-derived applicator prototyping. Int J Radiat Oncol Biol Phys. 2012;84(3):S870.
26. Anderson JM and Langone JJ. Issues and perspectives on the biocompatibility and immunotoxicity evaluation of implanted controlled release systems. J Control Release. 1999;57(2):107-13.
27. Novakova-Marcincinova L and Novak-Marcincin J. Experimental testing of materials used in fused deposition modeling rapid prototyping technology. Adv Mat Res. 2013;740:597-602.
28. Koo S, Hargreaves BA, Gold GE, Dragoo JL. Fabrication of custom-shaped grafts for cartilage regeneration. Int J Artificial Organs. 2010;33(10):731-37.
29. Aherwar A, Singh A, Patnaik A. A review paper on rapid prototyping and rapid tooling techniques for fabrication of prosthetic socket, Chapter 50. In: daSilva Bartolo PJ, Soares de Lemos AC, Pereira AM, et al., editors. High Value Manufacturing: Advanced Research in Virtual and Rapid Prototyping: Proceedings of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping. Leiria, Portugal, 1-5 October, 2013. London, UK: CRC Press; 2013.
30. Groscurth RC and Groscurth SU, inventors. Bone screw linking device. United States Patent App. 12/882,800. 2010 Sep. 15.
31. Kumar R, Sharma SD, Despande S, et al. Acrylonitrile Butadiene Styrene (ABS) plastic-based low cost tissue equivalent phantom for verification dosimetry in IMRT. J Appl Clin Med Phys. 2010;11(1):24-32.
32. Daskalov G, Löffler E, Williamson J. Monte Carlo-aided dosimetry of a new high dose-rate brachytherapy source. Med Phys. 1998;25(11):2200-08.