Porous coordination polymers with ubiquitous and biocompatible metals and a neutral bridging ligand

Nature Communications

Volumn 6, Issue , 2015, Pages

  Noro, Shin Ichiro ^a,b   Mizutani, Junya ^a   Hijikata, Yuh ^c   Matsuda, Ryotaro ^b,d   Sato, Hiroshi ^d   Kitagawa, Susumu ^d   Sugimoto, Kunihisa ^e   Inubushi, Yasutaka ^f   Kubo, Kazuya ^a   Nakamura, Takayoshi ^a  

^a HOKKAIDO UNIVERSITY   (Japan)

^b JAPAN SCIENCE AND TECHNOLOGY AGENCY   (Japan)

^c NAGOYA UNIVERSITY   (Japan)

^d KYOTO UNIVERSITY   (Japan)

^e JAPAN SYNCHROTRON RADIATION RESEARCH INSTITUTE   (Japan)

^f KURARAY CO LTD   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

CALCIUM; CARBON DIOXIDE; LIGAND; MAGNESIUM; METAL; METHANE; POLYMER; POROUS COORDINATION POLYMER; UNCLASSIFIED DRUG; BIOMATERIAL;

ADSORPTION; CALCIUM; CARBON DIOXIDE; COST ANALYSIS; DESIGN METHOD; ION EXCHANGE; LIGAND; MAGNESIUM; METHANE; POLYMER; THREE-DIMENSIONAL MODELING;

ADSORPTION; ARTICLE; BIOCOMPATIBILITY; CRYSTAL STRUCTURE; ENVIRONMENTAL TEMPERATURE; POROSITY; SYNTHESIS; CHEMICAL STRUCTURE; CHEMISTRY;

ADSORPTION; BIOCOMPATIBLE MATERIALS; CALCIUM; MAGNESIUM; METALS; MOLECULAR STRUCTURE; POLYMERS; POROSITY;

EID: 84922722248     PISSN: None     EISSN: 20411723     Source Type: Journal    
DOI: 10.1038/ncomms6851     Document Type: Article

References (56)

1. Yaghi, O. M. et al. Reticular synthesis and the design of new materials. Nature 423, 705-714 (2003).
2. Kitagawa, S., Kitaura, R. & Noro, S. Functional porous coordination polymers. Angew. Chem., Int. Ed. 43, 2334-2375 (2004).
3. Bradshaw, D., Claridge, J. B., Cussen, E. J., Prior, T. J. & Rosseinsky, M. J. Design, chirality, and flexibility in nanoporous molecule-based materials. Acc. Chem. Res. 38, 273-282 (2005).
4. Férey, G. Hybrid porous solid: past, present, future. Chem. Soc. Rev. 37, 191-214 (2008).
5. Morris, R. E. & Wheatley, P. S. Gas storage in nanoporous materials. Angew. Chem. Int. Ed. 47, 4966-4981 (2008).
6. Zacher, D., Schmid, R., Wöll, C. & Fischer, R. A. Surface chemistry of metal-organic frameworks at the liquid-solid interface. Angew. Chem. Int. Ed. 50, 176-199 (2011).
7. Lu, G. et al. Imparting functionality to a metal-organic framework material by controlled nanoparticle encapsulation. Nat. Chem. 4, 310-316 (2012).
8. Cohen, S. M. Postsynthetic Methods for the Functionalization of Metal-Organic Frameworks. Chem. Rev. 112, 970-1000 (2012).
9. Haldar, R. & Maji, T. K. Metal-organic frameworks (MOFs) based on mixed linker systems: structural diversities towards functional materials. CrystEngComm 15, 9276-9295 (2013).
10. Brozek, C. K. & Dinca, M. Ti3-, V2/3-, Cr2/3-, Mn2-, and Fe2-Substituted MOF-5 and Redox Reactivity in Cr-and Fe-MOF-5. J. Am. Chem. Soc. 135, 12886-12891 (2013).
11. Gao, W.-Y. et al. Crystal engineering of an nbo topology metal-organic framework for chemical fixation of CO2 under ambient conditions. Angew. Chem. Int. Ed. 53, 2615-2619 (2014).
12. Takashima, Y., Long, D.-L. & Cronin, L. Towards imaging electron density inside metal-organic framework structures. Chem. Commun. 50, 2271-2274 (2014).
13. Yamada, T., Otsubo, K., Makiura, R. & Kitagawa, H. Designer co-ordination polymers: dimensional crossover architectures and proton conduction. Chem. Soc. Rev. 42, 6655-6669 (2013).
14. Makal, T. A., Li, J. R., Lu, W. G. & Zhou, H. C. Methane storage in advanced porous materials. Chem. Soc. Rev. 41, 7761-7779 (2012).
15. Torad, N. L., Hu, M., Imura, M., Naito, M. & Yamauchi, Y. Large Cs adsorption capability of nanostructured Prussian Blue particles with high accessible surface areas. J. Mater. Chem. 22, 18261-18267 (2012).
16. Sumida, K. et al. Carbon dioxide capture in metal-organic frameworks. Chem. Rev. 112, 724-781 (2012).
17. Gascon, J. et al. Practical approach to zeolitic membranes and coatings: state of the art, opportunities, barriers, and future perspectives. Chem. Mater. 24, 2829-2844 (2012).
18. Sato, H. et al. Self-accelerating CO Sorption in a soft nanoporous crystal. Science 343, 167-170 (2014).
19. Lee, J. et al. Metal-organic framework materials as catalysts. Chem. Soc. Rev. 38, 1450-1459 (2009).
20. Meng, L. et al. Crystal engineering of a microporous, catalytically active fcu topology MOF using a custom-designed metalloporphyrin linker. Angew. Chem. Int. Ed. 51, 10082-10085 (2012).
21. Gu, X., Lu, Z.-H., Jiang, H.-L., Akita, T. & Xu, Q. Synergistic catalysis of metal-organic framework-immobilized Au-Pd nanoparticles in dehydrogenation of formic acid for chemical hydrogen storage. J. Am. Chem. Soc. 133, 11822-11825 (2011).
22. Fromm, K. M. Coordination polymer networks with s-block metal ions. Coord. Chem. Rev. 252, 856-885 (2008).
23. Miller, S. R. et al. A rare example of a porous Ca-MOF for the controlled release of biologically active NO. Chem. Commun. 49, 7773-7775 (2013).
24. McDonald, T. M. et al. Capture of carbon dioxide from air and flue gas in the alkylamine-appended metal-organic framework mmen-Mg2(dobpdc). J. Am. Chem. Soc. 134, 7056-7065 (2012).
25. Caskey, S. R., Wong-Foy, A. G. & Matzger, A. J. Dramatic Tuning of carbon dioxide uptake via metal substitution in a coordination polymer with cylindrical pores. J. Am. Chem. Soc. 130, 10870-10871 (2008).
26. Senkovska, I. & Kaskel, S. Solvent-Induced pore-size adjustment in the metalorganic framework [Mg3(ndc)3(dmf)4] (ndcnaphthalenedicarboxylate). Eur. J. Inorg. Chem. 2006, 4564-4569 (2006).
27. Dinca, M. & Long, J. R. Strong H2 binding and selective gas adsorption within the microporous coordination solid Mg3(O2C-C10H6-CO2)3. J. Am. Chem. Soc. 127, 9376-9377 (2005).
28. Banerjee, D., Zhang, Z., Plonka, A. M., Li, J. & Parise, J. B. A calcium coordination framework having permanent porosity and high CO2/N2 selectivity. Cryst. Growth Des. 12, 2162-2165 (2012).
29. Mallick, A. et al. Fine-tuning the balance between crystallization and gelation and enhancement of CO2 uptake on functionalized calcium based MOFs and metallogels. J. Mater. Chem. 22, 14951-14963 (2012).
30. Spek, A. L. Structure validation in chemical crystallography. Acta Crystallogr., Sect. D 65, 148-155 (2009).
31. Shannon, R. D. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides. Acta Crystallogr. Sect. A 32, 751-767 (1976).
32. Serre, C. et al. An explanation for the very large breathing effect of a metal-organic framework during CO2 adsorption. Adv. Mater. 19, 2246-2251 (2007).
33. Myers, A. L. & Prausnitz, J. M. Thermodynamics of mixed-gas adsorption. AIChE. J. 11, 121-127 (1965).
34. Hamon, L., Jolimatre, E. & Pirngruber, G. D. CO2 and CH4 separation by adsorption using Cu-BTC metal-organic framework. Ind. Eng. Chem. Res. 49, 7497-7503 (2010).
35. Bae, Y.-S. & Snurr, R. Q. Development and evaluation of porous materials for carbon dioxide separation and capture. Angew. Chem. Int. Ed. 50, 11586-11596 (2011).
36. McDonald, T. M., D'Alessandro, D. M., Krishna, R. & Long, J. R. Enhanced carbon dioxide capture upon incorporation of N,N0-dimethylethylenediamine in the metal-organic framework CuBTTri. Chem. Sci 2, 2022-2028 (2011).
37. Dunne, J. A., Rao, M., Sircar, S., Gorte, R. J. & Myers, A. L. Calorimetric heats of adsorption and adsorption isotherms. 2. O2, N2, Ar, CO2, CH4, C2H6, and SF6 on NaX, H-ZSM-5, and Na-ZSM-5 zeolites. Langmuir 12, 5896-5904 (1996).
38. Nugent, P. et al. Porous materials with optimal adsorption thermodynamics and kinetics for CO2 separation. Nature 495, 80-84 (2013).
39. Fracaroli, A. M. et al. Metal-organic frameworks with precisely designed interior for carbon dioxide capture in the presence of water. J. Am. Chem. Soc. 136, 8863-8866 (2014).
40. Shekhah, O. et al. Made-to-order metal-organic frameworks for trace carbon dioxide removal and air capture. Nat. Commun. 5, 4228 (2014).
41. Smaldone, R. A. et al. Metal-organic frameworks from edible natural products. Anegw. Chem. Int. Ed. 49, 8630-8634 (2010).
42. Gassensmith, J. J. et al. Strong and reversible binding of carbon dioxide in a green metal-organic framework. J. Am. Chem. Soc. 133, 15312-15315 (2011).
43. Forgan, R. S. et al. Nanoporous carbohydrate metal-organic frameworks. J. Am. Chem. Soc. 134, 406-417 (2012).
44. Chamayou, A.-C. & Janiak, C. A422 A long metal-complex anon and a 1D cationic coordination polymer, both based on 4,40-bipyridine-N,N0-dioxide, yielding a 3D and 2-fold interpenetrated fsc net of the hydrogen-bonded metalorganic 1D polymer. Inorg. Chim. Acta 363, 2193-2200 (2010).
45. Neimark, A. V. & Ravikovitch, P. I. Calibration of pore volume in adsorption experiments and theoretical models. Langmuir 13, 5148-5160 (1997).
46. Lemmon, E. W., McLinden, E. W. & Friend, D. G. in NIST Chemistry WebBook, NIST Standard Reference Database Number 69 (eds Linstrom, P. J. & Mallard, W. G. ) 20899 (National Institute of Standards and Technology, 2003).
47. Czepirski, L. & Jagiello, J. Virial-type thermal equation of gas-solid adsorption. Chem. Eng. Sci. 44, 797-801 (1989).
48. Becke, A. D. Density-functional thermochemistry. III. The role of exact exchange. J. Chem. Phys. 98, 5648-5652 (1993).
49. Lee, C., Yang, W. & Parr, R. G. Development of the Colle-Salvetti correlationenergy formula into a functional of the electron density. Phys. Rev. B 37, 785-789 (1988).
50. Becke, A. D. Density-functional exchange-energy approximation with correct asymptotic behavior. Phys. Rev. A 38, 3098-3100 (1988).
51. Miehlich, B., Savin, A., Stoll, H. & Preuss, H. Results obtained with the correlation energy density functionals of becke and Lee, Yang and Parr. Chem. Phys. Lett. 157, 200-206 (1989).
52. Frisch, M. J. et al. Gaussian 09, Revision D. 01 (Gaussian, Inc., 2009).
53. Burla, M. C. et al. SIR2004: an improved tool for crystal structure determination and refinement. J. Appl. Crystallogr 38, 381-388 (2005).
54. Sheldrick, G. M. A short history of SHELX. Acta Crystallogr. Sect. A 64, 112-122 (2008).
55. CrystalStructure 4. 0. 1: Crystal Structure Analysis Package; Rigaku Corp. : Tokyo, Japan (2000-2010).
56. Farrugia, L. J. WinGX suite for small-molecule single-crystal crystallography. J. Appl. Crystallogr. 32, 837-838 (1999).