Reviews on innovations and applications in structural health monitoring for infrastructures

Structural Monitoring and Maintenance

Volumn 1, Issue 1, 2014, Pages 1-45

  Li, Hong Nan ^a   Yi, Ting Hua ^a   Ren, Liang ^a   Li, Dong Sheng ^a   Huo, Lin Sheng ^a  

^a DALIAN UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Infrastructure; Sensing technology; Signal processing; Structural health monitoring; System identification

Indexed keywords

EID: 84922586927     PISSN: 22886605     EISSN: 22886613     Source Type: Journal    
DOI: 10.12989/smm.2014.1.1.001     Document Type: Article

References (114)

1. Aktan, A.E. and Catbas, F.N. (2003), Development of a model health monitoring guide for major bridges, Federal Highway Administration Research and Development for CONTRACT/ORDER NO. DTFH61-01-P-00347
2. Ansari, F. and Libo, Y. (1998), "Mechanics of bond and interface shear transfer in optical fiber sensors", J. Eng. Mech.-ASCE, 124(4), 385-394
3. Balageas, D., Fritzen, C.P. and Güemes, A. (2006), Structural health monitoring, ISTE, London, UK
4. Baldwin, C., Salter, T., Niemczuk, J., Chen, P. and Kiddy, J. (2002), "Structural monitoring of composite marine piles using multiplexed fiber Bragg grating sensors: In-field applications", Smart Structures and Materials 2002: Smart Systems for Bridges, Structures, and Highways, (Eds. S.C. Liu and D.J. Pines), Proceedings of the SPIE, San Diego, USA
5. Bai, H.F., Yi, T.H., Li, H.N. and Ren, L. (2012), "Multisensors on-site monitoring and characteristic analysis of UHV transmission tower", Int. J. Distrib. Sens. N., Article ID 545148, 1-10
6. Bergmeister, K. (2002), Monitoring and safety evaluation of existing concrete structures: state-of-the-art report, Fib Task Group 5.1
7. Betz, D.C., Thursby, G., Culshaw, B. and Staszewski, W.J. (2003), "Acousto-ultrasonic sensing using fiber Bragg gratings", Smart Mater. Struct., 12(1), 122-128
8. Bhalla, S. and Soh, C.K. (2003), "Structural impedance based damage diagnosis by piezo-transducers", Earthq. Eng. Struct. D., 32(12), 1897-1916
9. Brownjohn, J.M. (2007), "Structural health monitoring of civil infrastructure", Philos. T. R. Soc. A., 365(1851), 589-622
10. Brownjohn, J.M.W. and Moyo, P. (2001), "Monitoring of Singapore-Malaysia second link during construction", Porceedings of the 2nd International Conference on Experimental Mechanics, Singapore, June
11. Carne, T.G. and Dohrmann, C.R. (1995), "A modal test design strategy for model correlation", Proceedings of the 13th International Modal Analysis Conference, Nashville, USA, February
12. Chen, S., Chen, Z. and Wang, W. (2010), "Multi-scale detection techniques for local scour monitoring inriver bed: case study at Sutong Bridge", Proceeding of the Earth and Space 2010: Engineering, Science, Construction, Hawaii, USA, March
13. Cheung, M.S., Tadros, G.S., Brown, T., Dilger, W.H., Ghali, A. and Lau, D.T. (1997), "Field monitoring and research on performance of the Confederation Bridge", Can. J. Civil. Eng., 24(6), 951-962
14. Cigada, A., Moschioni, G., Vanali, M. and Caprioli, A. (2010), "The measurement network of the San Siro Meazza stadium in Milan: origin and implementation of a new data acquisition strategy for structural health monitoring", Exp. Techniques, 34(1), 70-81
15. Cox, H. (1952), "The elasticity and strength of paper and other fibrous materials", Br. J.Appl. Phys. s, 3(3), 72-79
16. Cullington, D.W., MacNeil, D., Paulson, P. and Elliot, J. (1999), "Continuous acoustic monitoring of grouted post-tensioned concrete bridges", Proceedings of the 8th International Structural Faults and Repair Conference, London, UK, June
17. Design code (2012), Design standard for structural health monitoring systems (CECS 333: 2012), Standard for China Association for Engineering Construction Standardization, Beijing, China
18. Dijk, R.V. and Boom, Henk. V.D. (2007), "Full scale monitoring Marco Polo tension leg platform", Proceedings of the 26th International Conference on Offshore Mechanics and Arctic Engineering, CA, USA, June
19. Farrar, C.R. and Worden, K. (2013). Structural health monitoring-a machine learning perspective, John Wiley & Sons Ltd, Chichester, UK
20. Friebele, E.J., Askins, C.G., Bosse, A.B., Kersey, A.D., Patrick, H.J., Pogue, W.R., Putnam, M.A., Simon, W. R., Tasker, F.A., Vincent, W.S. and Vohra, S.T. (1999), "Optical fiber sensors for spacecraft applications", Smart Mater. Struct., 8(6), 813-838
21. Galiotis, C., Young, R., Yeung, P. and Batchelder, D. (1984), "Study of model polydiacetylene/epoxy composites. Part 1-the axial strain in the fibre", J. Mater. Sci., 19(11), 3640-3648
22. Hejll, A. (2007), Civil structural health monitoring-strategies, methods and applications, Ph.D. Dissertation, Luleå University of Technology, Luleå
23. Henrik, L.J. and Denmark, S.E. (2002), "Analyzing Europe's largest suspension bridge", Proceedings of the FIG XXII International Congress, Washington, USA, April
24. Hernandez-Garcia M.R., Masri S.F., Ghanem R., Figueiredo E. and Farrar C.R. (2010), "An experimental investigation of change detection in uncertain chain-like systems", J. Sound Vib., 329(12), 2395-2409
25. Housner, G.W., Bergman, L.A., Caughey, T.K., Chassiakos, A.G., Claus, R.O., Masri, S.F., Soong, T.T., Spencer, B. F. and Yao, J.T.P. (1997), "Structural control: past, present, and future", J. Struct. Eng.-ASCE, 123(9), 897-971
26. ISO (2002), Mechanical vibrations evaluation of results from dynamic tests and investigations of bridges, ISO 18649
27. Jahani, K. and Nobari, A. (2008), "Identification of dynamic (Youngs and shear) moduli of a structural adhesive using modal based direct model updating method", Exp. Mech., 48(5), 599-611
28. James G.H., Carne T.G. and Lauffer J.P. (1993), The natural excitation technique (NExT) for modal parameter extraction from operating wind turbines, Sandia National Labs Report, Albuquerque, NM
29. James G.H., Carne T.G. and Mayes R.L. (1996), "Modal parameter extraction from large operating structures using ambient excitation", Proceedings of the 14th International Modal Analysis Conference, Orlando, Florida, USA, February
30. Jiao, L. and Li, H.N. (2006), "A data fusion method based on improved consensus algorithm", J. Disaster Prevention Mitigation Eng., 26(2), 170-174
31. Kammer, D.C. (1991), "Sensor placement for on-orbit modal identification and correlation of large space structures", J. Guid. Control Dynam., 14(2), 251-259
32. Kammer, D.C. and Tinker, M.L. (2004), "Optimal placement of tri-axial accelerometers for modal vibration tests", Mech. Syst. Signal Pr., 18(1), 29-41
33. Kashima, S., Yanaka, Y. and Suzuki, S. (2001), "Monitoring the Akashi Kaikyo bridge: first experiences", Struct. Eng. Int., 11(2), 120-123
34. Kijewski-Correa, T., Kareem, A. and Kochly, M. (2006), "Experimental verification and full-scale deployment of Global Positioning Systems to monitor the dynamic response of tall buildings", J. Struct. Eng.-ASCE, 132(8), 1242-1253
35. Ko, J.M. and Ni, Y.Q. (2005), "Technology developments in structural health monitoring of large-scale bridges", Eng. Struct., 27(12), 1715-1725
36. Lai, T., Yi, T.H. and Li, H.N. (2010), "Multi-rate data fusion for dynamic response data using adaptive kalman filtering", Proceedings of the 9th International Conference on Civil and Environmental Engineering, Dalian, China, November
37. Lee E.T. and Eun H.C. (2008), "Damage detection of damage beam by constrained displacement curvature", J. Mech. Sci. Technol., 22(6), 1111-1120
38. Liang, C., Sun, F.P. and Rogers, C.A. (1994), "Coupled electro-mechanical analysis of adaptive material systems: determination of the actuator power consumption and system energy transfer", J. Intel. Mat. Syst. Str., 5(1), 12-20
39. Liang,Y.B., Li, D.S. and Li, H.N. (2014), "Online damage detection based on the combination of successive displacement curvature under the influence of environmental temperature", Submitted to J. Dalian Univ. Tech
40. Li, D.S., Li, H.N. and Fritzen, C.P. (2007), "The connection between Effective independence and modal kinetic energy methods for sensor placement", J. Sound Vib., 305(4-5), 945-955
41. Li, D.S., Li, H.N. and Fritzen, C.P. (2009), "A note on fast computation of effective independence through QR downdating for sensor placement", Mech. Syst. Signal Pr., 23(4), 1160-1168
42. Li, D.S., Li, H.N. and Fritzen, C.P. (2012), "Load dependent sensor placement method: Theory and experimental validation", Mech. Syst. Signal Pr., 31(1), 217-227
43. Li, D.S., Li, H.N., Ren, L. and Song, G. (2006), "Strain transferring analysis of fiber Bragg grating sensors", Opt. Eng., 45(2), 4402
44. Li, H.N., Gao, D.W. And Yi, T.H. (2008), "Advances in structural health monitoring system in civil engineering", Adv. Mech., 38(2), 151-166
45. Li, H.N., He, X.Y. and Yi, T.H. (2009a), "Multi-component seismic response analysis of offshore platform by wavelet energy principle", Coast. Eng., 56(8), 810-830
46. Li, H.N. and Li, D.S. (2002), "Safety assessment, health monitoring and damage diagnosis for structures in civil engineering", Earthq. Eng. Eng. Vib., 22(3), 82-90
47. Li, H.N., Li, D.S. and Song, G.B. (2004), "Recent applications of fiber optic sensors to health monitoring in civil engineering", Eng. Struct., 26(11), 1647-1657
48. Li, H.N., Yi, T.H., Gu, M. and Huo, L.S. (2009b), "Evaluation of earthquake-induced structural damages by wavelet transform", Prog. Nat. Sci., 19(4), 461-470
49. Li, H.N., Yi, T.H., Yi, X.D. and Wang, G.X. (2007), "Measurement and analysis of wind-induced response of tall building based on GPS technology", Adv. Struct. Eng., 10(1), 83-93
50. Li, H.N., Zhou, G.D., Ren, L. and Li, D.S. (2007), "Strain transfer analysis of embedded fiber Bragg grating sensor under nonaxial stress", Opt. Eng., 46(5), 054402
51. LI, H.N., Zhou, G.D., Ren, L. and Li, D.S. (2009), "Strain transfer coefficient analyses for embedded fiber Bragg grating sensors in different host materials", J. Eng. Mech.-ASCE, 135(12), 1343-1353
52. Limongelli, M.P. (2003), "Optimal location of sensors for reconstruction of seismic responses through spline function interpolation", Earthq. Eng. Struct. D., 32(7), 1055-1074
53. Li, Q., Li, G., Wang, G., Ansari, F. and Liu, Q. (2002), "Elasto-plastic bonding of embedded optical fiber sensors in concrete", J. Eng. Mech.-ASCE, 128(4), 471-478
54. Li, X., Huo, L.S. and Li, H.N. (2012), "Beat phenomenon analysis of concrete beam with piezoelectric sensors", Int. J. Distrib. Sens. N., 2012(2012), Article ID 296124
55. Magne, S., Boussoir, J., Rougeault, S., Marty-Dewynter, V., Ferdinand, P. and Bureau, L. (2003), "Health monitoring of the Saint-Jean bridge of Bordeaux, France using fiber Bragg grating extensometers", Proceedings of the SPIE 5050, Smart Structures and Materials 2003: Smart Sensor Technology and Measurement Systems, CA, USA, July
56. Masri S., Bekey G., Sassi H. and Caughey T. (1982), "Non-parametric identification of a class of nonlinear multidegree dynamic systems", Earthq. Eng. Struct. D., 10(1), 1-30
57. Mohamad, H., Bennett, P., Soga, K., Mair, R., Lim, C., Knight-Hassell, C. and Ow, C. (2007), "Monitoring Tunnel Deformation induced by close-proximity bored tunneling using distributed optical fiber strain measurements". Proceeding of the 7th International Symposium on Field Measurements in Geomechanics, Boston, USA, September
58. Mufti, A.A. (2001), Guidelines for structural health monitoring, ISIS Canada
59. Mufti, A.A. (2002), "Structural health monitoring of innovative Canadian civil engineering", Struct. Health. Monit., 1(1), 89-103
60. Nayeri R.D., Masri S.F., Ghanem R.G. and Nigbor R.L. (2008), "A novel approach for the structural identification and monitoring of a full-scale 17-story building based on ambient vibration measurements", Smart Mater. Struct., 17(2), 025006
61. Ni, Y.Q., Xia, Y., Liao, W.Y. and Ko, J.M. (2009), "Technology innovation in developing the structural health monitoring system for Guangzhou New TV Tower", Struct. Control Health Monit., 16(1), 73-98
62. Pak, Y. (1992), "Longitudinal shear transfer in fiber optic sensors", Smart Mater. Struct., 1(1), 57-62
63. Papadimitriou, C. (2004), "Optimal sensor placement methodology for parametric identification of structural systems", J. Sound Vib., 278(4-5), 923-947
64. Papadopoulos, M. and Garcia, E. (1998), "Sensor placement methodologies for dynamic testing", AIAA J, 36(2), 256-263
65. Peeters, B. and Roeck, G.D. (2001), "One-year monitoring of the Z24-Bridge: environmental effects versus damage events", Earthq. Eng. Struct. D., 30(2), 149-171
66. Penny, J.E.T., Friswell, M.I. and Garvey, S.D. (1994), "Automatic choice of measurement locations for dynamic testing", AIAA J., 32(2), 407-414
67. Ran, L., Yi, T.H., Ye, X.W. and Dong, X.B. (2012), "Long-term deformation monitoring of metro-tunnel airshaft excavation during construction stage", Int. J. Distrib. Sens. N., Article ID 972893, 1-11
68. Ren, L., Chen, J.Y. and Li, H.N. (2009), "Design and application of a fiber Bragg grating strain sensor with enhanced sensitivity in the small-scale dam model", Smart Mater. Struct., 18(3), 11-15
69. Ren, L., Li, H.N., Li, D.S. and Zhou, J. (2006), "Health monitoring system for offshore platform with fiber Bragg grating sensors", Opt. Eng., 45(8), Article ID 084401, 1-9
70. Ritdumrongkul, S. and Fujino, Y. (2007), "Identification of the location and size of cracks in beams by a piezoceramic actuator-sensor", Struct. Control Health Monit., 14(6), 931-943
71. Rucker, W., Hille, F. and Rohrmann, R. (2006), Guideline for structural health monitoring, SAMCO F08b
72. Schenewerk, M.S., Harris, R.S. and Stowell, J. (2006), "Structural health monitoring using GPS: observing the Sunshine Skyway Bridge", Bridges, 4, 18-25
73. Shang, H.S., Yi, T.H. and Yang, L.S. (2012), "Experimental study on the compressive strength of big mobility concrete with nondestructive testing method", Adv. Mater. Sci. Eng., Article ID 345214, 1-6
74. Song, G.B., Gu, H.C. and Mo, Y.L. (2008), "Smart aggregates: multi-functional sensors for concrete structures-a tutorial and a review", Smart Mater. Struct., 17(3), 1-17
75. Stubbs, N. and Park, S. (1996), "Optimal sensor placement for mode shapes via Shannon's sampling theorem", Microcomput. Civ. Eng., 11(6), 411-419
76. Tawie, R. and Lee, H.K. (2010), "Monitoring the strength development in concrete by EMI sensing technique", Constr. Build Mater., 24(9), 1746-1753
77. Timoshenko, S. (1956), Strength of material, part ii, elementary theory and problems, D Van Nostrand Co., Inc. New York, USA
78. Trendafilova, I., Heylen, W. and Brussel, H. Van. (2001), "Measurement point selection in damage detection using the mutual information concept", Smart Mater. Struct., 10(3), 528-533
79. Udd, E. (1995), Fiber optic smart structures, Wiley-Interscience, New York, NY, USA
80. Visser, W. (2004), Ship collision and capacity of brace members of fixed steel offshore platforms, HSE books, research report 220, 1-10
81. Wan, K.T., Leung, C.K.Y. and Olson, N.G. (2008), "Investigation of the strain transfer for surface-attached optical fiber strain sensors", Smart Mater. Struct., 17(3), Article ID 035037
82. Wenzel, H. (2009), Health monitoring of bridges, John Wiley & Sons, New York, USA
83. Wong, K.Y. (2004), "Instrumentation and health monitoring of cable-supported bridges", Struct.Control Health Monit., 11(2), 91-124
84. Ye, X.W., Ran, L., Yi, T.H. and Dong, X.B. (2012), "Intelligent risk assessment for dewatering of metro-tunnel deep excavations", Math. Probl. Eng., Article ID 618979, 1-13
85. Yi, T.H. and Li, H.N. (2006), "High accuracy GPS deformation monitoring via errors cancelling by ANC and wavelet analysis", Proceedings of the 10th ASCE Aerospace Division Conference on Engineering, Construction and Operations in Challenging Environments, Houston, TX, USA, March
86. Yi, T.H. and Li, H.N. (2009), Structural health monitoring based on GPS technology, China Architecture & Building Press, Beijing, China
87. Yi, T.H., Li, H.N. and Gu, M. (2010a), "Recent research and applications of GPS based technology for bridge health monitoring", Sci. China Technol. Sc., 53(10), 2597-2610
88. Yi, T.H., Li, H.N. and Gu, M. (2010b), "Full-scale measurement of dynamic response of a suspension bridge subjected to environmental loads using GPS technology", Sci. China Technol. Sc., 53(2), 469-479
89. Yi, T.H., Li, H.N. and Gu, M. (2011a), "A new method for optimal selection of sensor location on a high-rise building using simplified finite element model", Struct. Eng. Mech., 37(6), 671-684
90. Yi, T.H., Li, H.N. and Gu, M. (2011b), "Characterization and extraction of global positioning system multipath signals using improved particle filtering algorithm", Meas. Sci. Technol., 22, Article ID 075101: 1-11
91. Yi, T.H., Li, H.N. and Gu, M. (2011c), "Optimal sensor placement for health monitoring of high-rise structure based on genetic algorithm", Math. Probl. Eng., Article ID 395101, 1-11
92. Yi, T.H., Li, H.N. and Gu, M. (2011d), "Optimal sensor placement for structural health monitoring based on multiple optimization strategies", Struct. Des. Tall Spec., 20(7), 881-900
93. Yi, T.H. and Li, H.N. (2012a), "Methodology developments in sensor placement for health monitoring of civil infrastructures", Int. J. Distrib. Sens. N., Article ID 612726, 1-11
94. Yi, T.H., Li, H.N. and Gu, M. (2012b), "Effect of different construction materials on propagation of GPS monitoring signals", Measurement, 45(5), 1126-1139
95. Yi, T.H., Li, H.N. and Gu, M. (2012c), "Sensor placement for structural health monitoring of Canton Tower", Smart Struct. Syst., 10(4-5), 313-329
96. Yi, T.H., Li, H.N. and Zhang, X.D. (2012d), "A modified monkey algorithm for optimal sensor placement in structural health monitoring", Smart Mater. Struct., 21(10), Article ID 05033, 1-9
97. Yi, T.H., Li, H.N. and Zhang, X.D. (2012e), "Sensor placement on Canton Tower for health monitoring using asynchronous-climb monkey algorithm", Smart Mater. Struct., 21(12), 1-12
98. Yi, T.H., Li, H.N. and Zhao, X.Y. (2012f), "Noise smoothing for structural vibration test signals using an improved wavelet thresholding technique", Sensors, 12(8), 11205-11220
99. Yi, T.H., Li, H.N. and Gu, M. (2013a), "Experimental assessment of high-rate GPS receivers for deformation monitoring of bridge", Measurement, 46(1), 420-432
100. Yi, T.H., Li, H.N. and Gu, M. (2013b), "Recent research and applications of GPS-based monitoring technology for high-rise structures", Struct. Control Health Monit., 20(5), 649-670
101. Yi, T.H., Li, H.N. and Gu, M. (2013c), "Wavelet based multi-step filtering method for bridge health monitoring using GPS and accelerometer", Smart Struct. Syst., 11(4), 331-348
102. Yi, T.H., Li, H.N. and Sun, H.M. (2013d), "Multi-stage structural damage diagnosis method based on "energy-damage" theory", Smart Struct. Syst., 12(3-4), 345-361
103. Yi, T.H., Li, H.N. and Wang, X. (2013e), "Multi-dimensional sensor placement optimization for Canton Tower focusing on application demands", Smart Struct. Syst., 12(3-4), 235-250
104. Yoo, K. and Park, H. (1996), "Accurate downdating of a modified Gram-Schmidt QR decomposition", BIT, 36(1), 166-181
105. Zhan, C., Li, D.S. and Li, H.N. (2013), "A local damage detection approach based on restoring force method", Submitted to J. Sound Vib
106. Zhao, R.Q. and Tang, W.S. (2008), "Monkey algorithm for global numerical optimization", J. Uncer. Syst., 2(3), 165-176
107. Zhao, X.Y. (2008), Structure health monitoring and damage detection based on piezoelectric ceramictransducers, Ph.D. Dissertation, Dalian University of Technology, Dalian, China
108. Zhao, X.Y. and Li, H.N. (2008a), "Concrete structure monitoring based on built-in piezoelectric ceramic transducers", Proceedings of the SPIE: Smart Structures and Materials Symposium, San Jose, USA, March
109. Zhao, X.Y. and Li, H.N. (2008b), Parameters identification of concrete structure based on built-in PZT sensors, Earth & Space, Longbeach, USA, March
110. Zhou, G.D. and Yi, T.H. (2013a), "Recent developments on wireless sensor networks technology for bridge health monitoring", Math. Probl. Eng., Article ID 947867, 1-33
111. Zhou, G.D. and Yi, T.H. (2013b), "The node arrangement methodology of wireless sensor networks for long-span bridge health monitoring", Int. J. Distrib. Sens. N., Article ID 865324, 1-8
112. Zhou, G.D. and Yi, T.H. (2013c), "The nonuniform node configuration of wireless sensor networks for long-span bridge health monitoring", Int. J. Distrib. Sens. N., Article ID 797650, 1-9
113. Zhou, G.D. and Yi, T.H. (2013d), "Thermal load in large-scale bridges: a state-of-the-art review", Int. J. Distrib. Sens. N., Article ID 217983, 1-17
114. Zhou, J., Zhou, Z. and Zhang, D. (2010), "Study on strain transfer characteristics of fiber Bragg grating sensors", J. Intel. Mat. Syst. Struct., 21(11), 1117-1122