Novel sponge-like molecularly imprinted mesoporous silica material for selective isolation of bisphenol A and its analogues from sediment extracts

Analytica Chimica Acta

Volumn 853, Issue 1, 2015, Pages 311-319

  Yang, Jiajia ^a,b   Li, Yun ^a   Wang, Jincheng ^a   Sun, Xiaoli ^a,b   Shah, Syed Mazhar ^a   Cao, Rong ^a,b   Chen, Jiping ^a  

^a DALIAN INSTITUTE OF CHEMICAL PHYSICS   (China)

^b UNIVERSITY OF CHINESE ACADEMY OF SCIENCES   (China)

Author keywords

Bisphenols; Class selectivity; Molecularly imprinted; Solid phase extraction; Sponge mesoporous silica

Indexed keywords

GAS ADSORPTION; MESOPOROUS MATERIALS; PHASE SEPARATION; PHENOLS; SCANNING ELECTRON MICROSCOPY; SEDIMENTS; SELF ASSEMBLY; SILICA; TRANSMISSION ELECTRON MICROSCOPY;

BISPHENOLS; COVALENT MOLECULAR IMPRINTING; LARGE SPECIFIC SURFACE AREAS; MESOPOROUS SILICA; MOLECULARLY IMPRINTED; NITROGEN ADSORPTION-DESORPTION; SOLID-PHASE EXTRACTION; SPECIFIC ADSORPTION CAPACITIES;

EXTRACTION;

4,4' ISOPROPYLIDENEDIPHENOL; BISPHENOL AF; BISPHENOL B; BISPHENOL E; BISPHENOL F; MOLECULARLY IMPRINTED POLYMER; MOLECULARLY IMPRINTED SPONGE MESOPOROUS SILICA; PHENOL DERIVATIVE; SILICON DIOXIDE; UNCLASSIFIED DRUG;

ADSORPTION KINETICS; ARTICLE; CONCENTRATION (PARAMETERS); DESORPTION; HIGH PERFORMANCE LIQUID CHROMATOGRAPHY; INFRARED SPECTROSCOPY; ISOLATION PROCEDURE; POROSITY; RIVER ECOSYSTEM; SCANNING ELECTRON MICROSCOPY; SEDIMENT; SOLID PHASE EXTRACTION; TRANSMISSION ELECTRON MICROSCOPY; WASTE COMPONENT REMOVAL;

EID: 84922574505     PISSN: 00032670     EISSN: 18734324     Source Type: Journal    
DOI: 10.1016/j.aca.2014.09.051     Document Type: Article

References (43)

1. Liao C.Y., Liu F., Guo Y., Moon H.B., Nakata H., Wu Q., Kannan K. Occurrence of eight bisphenol analogues in indoor dust from the united states and several asian countries: implication for human exposure. Environ. Sci. Technol. 2012, 46:9138-9145.
2. Liao C.Y., Liu F., Moon H.B., Yamashita N., Yun S., Kannan K. Bisphenol analogues in sediments from industrialized areas in the United States, Japan, and Korea: spatial and temporal distributions. Environ. Sci. Technol. 2012, 46:11558-11565.
3. Liao C.Y., Liu F., Alomirah H., Loi V.D., Mohd M.A., Moon H.B., Nakata H., Kannan K. Bisphenol S in urine from the United States and seven Asian countries: occurrence and human exposures. Environ. Sci. Technol. 2012, 46:6860-6866.
4. Liao C.Y., Liu F., Kannan K. Bisphenol S, a new bisphenol analogue, in paper products and currency bills and its association with bisphenol A residues. Environ. Sci. Technol. 2012, 46:6515-6522.
5. Gallart-Ayala H., Moyano E., Galceran M.T. Analysis of bisphenols in soft drinks by on-line solid extraction fast liquid chromatography-tandem mass spectrometry. Anal. Chim. Acta 2011, 683:227-233.
6. 2 nanospheres for recognition of bisphenol A. J. Appl. Polym. Sci. 2013, 128:3846-3852.
7. Qi P.P., Wang J.C., Wang L.D., Li Y., Jin J., Su F., Tian Y.Z., Chen J.P. Molecularly imprinted polymers synthesized via semi-covalent imprinting with sacrifical spacer for imprinting phenols. Polymer 2010, 51:5417-5423.
8. Jiang T.H., Zhao L.X., Chu B.L., Feng Q.Z., Yan W., Lin J.M. Molecularly imprinted solid-phase extraction for the selective determination of 17β-estradiol in fishery samples with high performance liquid chromatography. Talanta 2009, 78:442-447.
9. Li J., Zhang X.B., Liu Y.X., Tong H.W., Xu Y.P., Liu S.M. Preparation of a hollow porous molecularly imprinted polymer using tetrabromobisphenol A as a dummy template and its application as SPE sorbent for determination of bisphenol A in tap water. Talanta 2013, 117:281-287.
10. Mou X.L., Zhang W.P., Chen Z.L. Highly selective extraction of baicalin in natural herbs and medicinal preparations by molecularly imprinted polymer. J. Appl. Polym. Sci. 2013, 130:1873-1878.
11. Lofgreen J.E., Moudrakovski I.L., Ozin G.A. Molecularly imprinted mesoporous organosilica. ACS Nano 2011, 5:2277-2287.
12. Chen L.X., Xu S.F., Li J.H. Recent advances in molecular imprinting technology: current status, challenges and highlighted applications. Chem. Soc. Rev. 2011, 40:2922-2942.
13. Morais E.C., Correa G.G., Brambilla R., dos Santos J.H.Z., Fisch A.G. Selective silica-based sorbent materials synthesized by molecular imprinting for adsorption of pharmaceuticals in aqueous matrices. J. Sep. Sci. 2013, 36:636-643.
14. Lewandowski D., Olejnik A., Schroeder G. Adsorption studies and release of selected dyes from functionalized mesoporous MCM-41 silica. Cent. Eur. J. Chem. 2014, 12:233-241.
15. San Y., Li H.S., Zhu M.H., Ma K., Jiao Q.Z., Wu Q. Catalytic performance of metal ion doped MCM-41 for methanol dehydration to dimethyl ether. J. Porous Mater. 2013, 20:1509-1518.
16. Mehdinia A., Ahmadifar M., Aziz-Zanjani M.O., Jabbari A., Hashtroudi M.S. Selective adsorption of 2,4-dinitrophenol on molecularly imprinted nanocomposites of mesoporous silica SBA-15/polyaniline. Analyst 2012, 137:4368-4374.
17. Mehdinia A., Aziz-Zanjani M.O., Ahmadifar M., Jabbari A. Design and synthesis of molecularly imprinted polypyrrole based on nanoreactor SBA-15 for recognition of ascorbic acid. Biosens. Bioelectron. 2013, 39:88-93.
18. Liu Y., Liu Z.C., Gao J., Dai J.D., Han J., Wang Y., Xie J.M., Yan Y.S. Selective adsorption behavior of Pb(II) by mesoporous silica SBA-15-supported Pb(II)-imprinted polymer based on surface molecularly imprinting technique. J. Hazard. Mater. 2011, 186:197-205.
19. Xue X.M., Li F.T. Removal of Cu(II) from aqueous solution by adsorption onto functionalized SBA-16 mesoporous silica. Micropor. Mesopor. Mater. 2008, 116:116-122.
20. 140. Micropor. Mesopor. Mater. 2009, 124:100-109.
21. Hwang J., Daiguji H. Proton transport in mesoporous silica SBA-16 thin films with three-dimensional cubic structures. Langmuir 2013, 29:2406-2411.
22. Mureseanu M., Galarneau A., Renard G., Fajula F. A new mesoporous micelle-templated silica route for enzyme encapsulation. Langmuir 2005, 21:4648-4655.
23. Galarneau A., Mureseanu M., Atger S., Renard G., Fajula F. Immobilization of lipase on silicas. Relevance of textural and interfacial properties on activity and selectivity. New J. Chem. 2006, 30:562-571.
24. Galarneau A., Renard G., Mureseanu M., Tourrette A., Biolley C., Choi M., Ryoo R., Renzo F.D., Fajula F. Synthesis of sponge mesoporous silicas from lecithin/dodecylamine mixed-micelles in ethanol/water media: a route towards efficient biocatalysts. Micropor. Mesopor. Mater. 2007, 104:103-114.
25. Galarneau A., Sartori F., Cangiotti M., Mineva T., Renzo F.D., Ottaviani M.F. Sponge mesoporous silica formation using disordered phospholipid bilayers as template. J. Phys. Chem. B 2010, 114:2140-2152.
26. 2O system. Langmuir 2006, 22:440-445.
27. Kleitz F., Liu D., Anilkumar G.M., Park I.S., Solovyov L.A., Shmakov A.N., Ryoo R. Large cage face-centered-cubic Fm3m mesoporous silica: synthesis and structure. J. Phys. Chem. B 2003, 107:14296-14300.
28. Zhu R., Zhao W.H., Zhai M.J., Wei F.D., Cai Z., Sheng N., Hu Q. Molecularly imprinted layer-coated silica nanoparticles for selective solid-phase extraction of bisphenol A from chemical cleansing and cosmetics samples. Anal. Chim. Acta 2010, 658:209-216.
29. Wang Y.Q., Yang Y.Y., Xu L., Zhang J. Bisphenol A sensing based on surface molecularly imprinted, ordered mesoporous silica. Electrochim. Acta 2011, 56:2105-2109.
30. Jiang X.M., Tian W., Zhao C.D., Zhang H.X., Liu M.C. A novel sol-gel-material prepared by a surface imprinting technique for the selective solid-phase extraction of bisphenol A. Talanta 2007, 72:119-125.
31. Ren Y.M., Ma W.Q., Ma J., Wen Q., Wang J., Zhao F.B. Synthesis and properties of bisphenol A molecular imprinted particle for selective recognition of BPA from water. J. Colloid Interface Sci. 2012, 367:355-361.
32. Ki C.D., Oh C., Oh S.G., Chang J.Y. The use of a thermally reversible bond for molecular imprinting of silica spheres. J. Am. Chem. Soc. 2002, 124:14838-14839.
33. Yang H.H., Zhang S.Q., Yang W., Chen X.L., Zhuang Z.X., Xu J.G., Wang X.R. Molecularly imprinted sol-gel nanotubes membrane for biochemical separations. J. Am. Chem. Soc. 2004, 126:4054-4055.
34. Wang X., Wang L.Y., He X.W., Zhang Y.K., Chen L.X. A molecularly imprinted polymer-coated nanocomposite of magnetic nanoparticles for estrone recognition. Talanta 2009, 78:327-332.
35. He C.Y., Long Y.Y., Pan J.L., Li K., Liu F. Molecularly imprinted silica prepared with immiscible ionic liquid as solvent and porogen for selective recognition of testosterone. Talanta 2008, 74:1126-1131.
36. Jung B.M., Kim M.S., Kim W.J., Chang J.Y. Molecularly imprinted mesoporous silica particles showing a rapid kinetic binding. Chem. Commun. 2010, 46:3699-3701.
37. Kim Y.D., Jeon J.B., Chang J.Y. CdSe quantum dot-encapsulated molecularly imprinted mesoporous silica particles for fluorescent sensing of bisphenol A. J. Mater. Chem. 2012, 22:24075-24080.
38. Xue J.Q., Li D.W., Qu L.L., Long Y.T. Surface-imprinted core-shell Au nanoparticles for selective detection of bisphenol A on surface-enhanced Raman scattering. Anal. Chim. Acta 2013, 777:57-62.
39. Graham A.L., Carlson C.A., Edmiston P.L. Development and characterization of molecularly imprinted sol-gel materials for the selective detection of DDT. Anal. Chem. 2002, 74:458-467.
40. de la Orden M.U., Arranz J., Lorenzo V., Pérez E., Urreaga J.M. Study of the effects of the reaction conditions on the modification of clays with polyelectrolytes and silanes. J. Colloid Interface Sci. 2010, 342:185-191.
41. Yin J.F., Meng Z.H., Zhu Y.S., Song M.Y., Wang H.L. Dummy molecularly imprinted polymer for selective screening of trace bisphenols in river water. Anal. Methods 2011, 3:173-180.
42. Hiratsuka Y., Funaya N., Matsunaga H., Haginaka J. Preparation of magnetic molecularly imprinted polymers for bisphenol A and its analogues and their application to the assay of bisphenol A in river water. J. Pharm. Biomed. Anal. 2013, 75:180-185.
43. Wei F., Liu X., Zhai M., Cai Z., Xu G., Yang J., Du S., Hu Q. Molecularly imprinted nanosilica solid-phase extraction for bisphenol A in fish samples. Food Anal. Methods 2013, 6:415-420.