Design of a multi-disciplinary and feature-based collaborative environment for chemical process projects

Expert Systems with Applications

Volumn 42, Issue 8, 2015, Pages 4149-4166

  Xie, Yanan ^a   Ma, Yongsheng ^a  

^a UNIVERSITY OF ALBERTA   (Canada)

Author keywords

Chemical process engineering modeling; Engineering informatics; Feature based modeling; Inter disciplinary engineering; Unified feature

Indexed keywords

INTEROPERABILITY; LIFE CYCLE; SEMANTICS;

CHEMICAL PROCESS ENGINEERING; COLLABORATIVE ENVIRONMENTS; CONSISTENCY MANAGEMENT; ENGINEERING INFORMATICS; ENGINEERING INFORMATION; ENGINEERING KNOWLEDGE; FEATURE BASED MODELING; UNIFIED FEATURE;

SOFTWARE PROTOTYPING;

EID: 84922569464     PISSN: 09574174     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eswa.2015.01.009     Document Type: Article

References (74)

1. S. Abdul-Ghafour, P. Ghodous, B. Shariat, and E. Perna Semantic interoperability of knowledge in feature-based CAD models Computer-Aided Design 56 2014 45 57
2. A.J. Alvares, and J.C.E. Ferreira A system for the design and manufacture of feature-based parts through the Internet International Journal of Advanced Manufacturing Technology 35 2008 646 664
3. American Society of Mechanical Engineers (ASME). (2004). ASME Boiler and Pressure Vessel Code, Section VIII Division 1, New York.
4. B.R. Babic, N. Nesic, and Z. Miljkovic A review of automated feature recognition with rule-based pattern recognition Computers in Industry 59 2008 321 337
5. R. Bañares-Alcántara Design support systems for process engineering - I. Requirements and proposed solutions for a design process representation Computers & Chemical Engineering 19 3 1995 267 277
6. R. Bañares-Alcántara, and J.M.P. King Design support systems for process engineering - III. Design rationale as a requirement for effective support Computers & Chemical Engineering 21 3 1997 263 276
7. E.F. Bausbacher, and R.W. Hunt Process plant layout and piping design 1993 P T R-Prentice-Hall New Jersey
8. B. Bayer, and W. Marquardt Towards integrated information models for data and documents Chemical Engineering Science 28 2004 1249 1266
9. R. Bidarra, and W.F. Bronsvoort Semantic feature modeling Computer-Aided Design 32 3 2000 201 225
10. A. Borissova, M. Fairweather, and G.E. Goltz An option generation and selection methodology for process equipment selection Research in Engineering Design 17 2006 13 26
11. W.F. Bronsvoort, and F.W. Jansen Feature modeling and conversion - key concepts to concurrent engineering Computers in Industry 21 1 1993 61 86
12. W.F. Bronsvoort, and A. Noort Multiple-view feature modeling for integral product development Computer-Aided Design 36 10 2004 929 946
13. Brown, D. C. (2002). Functional, behavioral and structural features. In Proceedings of KIC5, 5th IFIP WG5.2 workshop on knowledge intensive CAD. USA.
14. S.K. Chandrasegaran, K. Ramani, R.D. Sriram, I. Horváth, A. Bernard, and R.F. Harik The evolution, challenges, and future of knowledge representation in product design systems Computer-Aided Design 45 2013 204 228
15. A.F. Chang, K. Panshikanti, and Y.A. Liu Refinery engineering - integrated process modeling and optimization 2012 Wiley-VCH Weinheim
16. J.C. Charpentier Among the trends for a modern chemical engineering, the third paradigm: The time and length multi-scale approach as an efficient tool for process intensification and product design and engineering Chemical Engineering Research and Design 88 2010 248 254
17. Chen, J., & Munteanu, M. (2012). Optimizing bitumen upgrading scheme - modeling and simulation approach. In 2012 AIChE spring meeting and 8th global congress on process safety.
18. X. Chen, S. Gao, Y. Yang, and S. Zhang Multi-level assembly model for top-down design of mechanical products Computer-Aided Design 44 2012 1033 1048
19. H.M. Chen, C.C. Hou, and Y.H. Wang A 3D visualized expert system for maintenance and management of existing building facilities using reliability-based method Expert Systems with Applications 40 2013 287 299
20. G. Chen, Y.-S. Ma, G. Thimm, and S.H. Tang Associations in a unified feature modeling scheme ASME Transactions Journal of Computing & Information Science in Engineering 6 2 2006 114 126
21. J.G. Cherng, X.Y. Shao, Y. Chen, and P.R. Sferro Feature-based part modeling and process planning for rapid response manufacturing Computers Industry Engineering 34 2 1998 515 530
22. J.R. Couper, W.R. Penney, J.R. Fair, and S.M. Walas Chemical process equipment selection and design 2010 Elsevier Oxford
23. Y.M. Deng, G.A. Britton, Y.C. Lam, S.B. Tor, and Y.S. Ma Feature-based CAD-CAE integration model for injection-moulded product design International Journal of Production Research 40 15 2002 3737 3750
24. J.M. Douglas Conceptual design of chemical processes 1988 McGraw-Hill New York
25. M.R. Eden, S.B. Jørgensen, R. Gani, and M.M. El-Halwagi A novel framework for simultaneous separation process and product design Chemical Engineering and Processing 43 2004 595 608
26. M.S. Erden, H. Komoto, T.J. Van Beek, V. D'Amelio, E. Echavarria, and T. Tomiyama A review of function modeling: approaches and applications Artificial Intelligence for Engineering Design, Analysis and Manufacturing 22 2008 147 169
27. K.V. Gernaey, and R. Gani A model-based systems approach to pharmaceutical product-process design and analysis Chemical Engineering and Processing 65 2010 5757 5769
28. M.R. Gray Upgrading petroleum residues and heavy oils 1994 Marcel Dekker New York
29. R. Guirardello, and R.E. Swaney Optimization of process plant layout with pipe routing Computers and Chemical Engineering 30 2005 99 114
30. M.T. Hayasi, and B. Asiabanpour Extraction of manufacturing information from design-by-feature solid model through feature recognition International Journal of Advanced Manufacturing Technology 44 11-12 2009 1191 1203
31. A.T. Jarullah, I.M. Mujtaba, and A.S. Wood Improving fuel quality by whole crude oil hydrotreating: A kinetic model for hydrodeasphaltenization in a trickle bed reactor Applied Energy 94 2012 182 191
32. Z. Jaworski, and B. Zakrzewska Towards multi-scale modeling in product engineering Computers and Chemical Engineering 35 2011 434 445
33. K.U. Klatt, and W. Marquardt Perspectives for process systems engineering - personal views from academia and industry Computers and Chemical Engineering 33 2009 536 550
34. S.M. Lam, and T.N. Wong Recognition of machining features - a hybrid approach International Journal of Production Research 38 17 2000 4301 4316
35. S.H. Lee A CAD-CAE integration approach using feature-based multi-resolution and multi-abstraction modelling techniques Computer-Aided Design 37 2005 941 955
36. S.H. Lee Feature-based non-manifold modeling system to integrate design and analysis of injection molding products Journal of Mechanical Science and Technology 23 2009 1331 1341
37. B. Louhichi, and L. Rivest Maintaining consistency between CAD elements in collaborative design using association management and propagation Computers in Industry 65 2014 124 135
38. W.L. Luyben Heuristic design of reaction/separation process Industrial & Engineering Chemistry Research 49 2010 11564 11571
39. Y.-S. Ma, and C.H. Bong Fine grain associative feature reasoning in collaborative engineering International Journal of Computer Applications in Technology 37 3-4 2010 210 216
40. Y.-S. Ma, G.A. Britton, S.B. Tor, and L.Y. Jin Associative assembly design features: Concept, implementation and application International Journal of Advanced Manufacturing Technology 32 5-6 2007 434 444
41. Y.-S. Ma, G. Chen, and G. Thimm Paradigm shift: Unified and associative feature-based concurrent and collaborative engineering Journal of Intelligent Manufacturing, special issue on Advanced Technologies for Collaborative Manufacturing 19 6 2008 626 641
42. Y.-S. Ma, and T. Tong Associative feature modeling for concurrent engineering integration Computers in Industry 51 1 2003 51 71
43. V. Mahalec, and R.L. Motard Procedures for the initial design of chemical processing systems Computers and Chemical Engineering 1 1977 57 68
44. W. Marquardt, and M. Nagl Workflow and information centered support of design processes - the IMPROVE perspective Computers & Chemical Engineering 29 1 2004 65 82
45. W.L. McCabe, J.C. Smith, and P. Harriott Unit operations of chemical engineering 7th ed. 2005 McGraw-Hill Boston
46. R.A. Meyers Handbook of petroleum refining processes 3rd ed. 2004 McGraw-Hill New York
47. D.C. Miller, and J.F. Davis Process design decision support system for developing process chemistry Industrial & Engineering Chemistry Research 39 8 2000 2954 2969
48. G.D. Moggridge, and E.L. Cussler An introduction to chemical product design Chemical Engineering Research and Design 78 A1 2010 5 11
49. A. Mokhtar, and X. Xu Machining precedence of 21/2D interacting features in a feature-based data model Journal of Intelligent Manufacturing 22 2 2011 145 161
50. R. Morales-Rodríguez, R. Gani, S. Déchelotte, A. Vacher, and O. Baudouin Use of CAPE-OPEN standards in the interoperability between modelling tools (MoT) and process simulators (Simulis® Thermodynamics and ProSimPlus) Chemical Engineering Research and Design 86 2008 823 833
51. J. Morbach, A. Wiesner, and W. Marquardt OntoCAPE - a (re)usable ontology for computer-aided process engineering Computers and Chemical Engineering 33 2009 1546 1556
52. V. Naranje, and S. Kumar A knowledge based system for automated design of deep drawing die for axisymmetric parts Expert Systems with Applications 41 2014 1419 1431
53. Persson, L. G., Santos, F. B., Tavares, C. A. C., & Andrade, A. E. (2009). Methodology of pipe and equipment layout for on-shore oil & gas industry. In 10th international symposium on process systems engineering - PSE2009.
54. H. Schmidt-Traub, M. Köster, T. Holtkötter, and N. Nipper Conceptual plant layout Computers and Chemical Engineering 22 1998 S499 S504
55. R. Schneider, and W. Marquardt Information technology support in the chemical process design life cycle Chemical Engineering Science 57 10 2002 1763 1792
56. J.J. Shah Assessment of features technology Computer-Aided Design 23 5 1991 331 343
57. J.J. Shah, and M. Mäntylä Parametric and feature-based CAD/CAM 1995 John Wiley & Sons New York
58. J.J. Siirola, G.J. Powers, and D.F. Rudd Synthesis of system designs: III. Toward a process concept generator AIChe Journal 17 3 1971 677 682
59. J.G. Speight The refinery of the future 2011 Elsevier Oxford
60. G. Stephanopoulos, and G.V. Reklaitis Process systems engineering: From solvay to modern bio- and nanotechnology. A history of development, successes and prospects for the future Chemical Engineering Science 66 2011 4272 4306
61. A.S. Syaimak, and D.A. Axinte An approach of using primitive feature analysis in manufacturability analysis systems for micro-milling/drilling International Journal of Computer Integrated Manufacturing 22 8 2009 727 744
62. S.H. Tang, G. Chen, and Y.-S. Ma Fundamental concepts of generic features Semantic modeling and interoperability in product and process engineering 2013 Springer London
63. S. Tessier, and Y. Wang Ontology-based feature mapping and verification between CAD systems Advanced Engineering Informatics 27 2013 76 92
64. G. Towler, and R.K. Sinnott Chemical engineering design - principles, practice and economics of plant and process design 2nd ed. 2013 Elsevier Oxford
65. W.J.C. Verhagen, P. Bermell-Garcia, R.E.C. Dijk, and R. Curran A critical review of knowledge-based engineering: An identification of research challenges Advanced Engineering Informatics 26 2012 5 15
66. A.K. Verma, and S. Rajotia A review of machining feature recognition methodologies International Journal of Computer Integrated Manufacturing 23 4 2010 353 368
67. G. Vijaykumar, and A. Chakrabarti Understanding the knowledge needs of designers during design process in industry ASME Transactions Journal of Computing and Information Science in Engineering 8 1 2008 0110041 0110049
68. A. Wiesner, J. Morbach, and W. Marquardt Information integration in chemical process engineering based on semantic technologies Computers and Chemical Engineering 35 2011 692 708
69. Y.N. Xie, J.K. Liu, H.Y. Liu, and Y.-S. Ma Features and interoperability of computer aided engineering systems Semantic modeling and interoperability in product and process engineering 2013 Springer London
70. Z. Xu, J. Zhang, Y. Li, S. Jiang, and Y. Sun Product modeling framework based on interaction feature pair Computer-Aided Design 45 2013 1591 1603
71. C.L. Yeung, C.F. Cheung, W.M. Wang, and E. Tsui A knowledge extraction and representation system for narrative analysis in the construction industry Expert Systems with Applications 41 2014 5710 5722
72. Y. Zheng, J.M. Taib, and M.M. Tap Decomposition of interacting machining features based on the reasoning on the design features International Journal of Advanced Manufacturing Technology 58 1-4 2012 359 377
73. X. Zhou, Y. Qiu, G. Hua, H. Wang, and X. Ruan A feasible approach to the integration of CAD and CAPP Computer-Aided Design 39 2007 324 338
74. S.E. Zitney Process/equipment co-simulation for design and analysis of advanced energy systems Computers and Chemical Engineering 34 2010 1532 1542