Synthesis, characterization and in vitro studies of polysulfone/graphene oxide composite membranes

Composites Part B: Engineering

Volumn 72, Issue , 2015, Pages 108-115

  Ionita, Mariana ^a   Vasile, Eugenia ^a   Crica, Livia Elena ^a   Voicu, Stefan Ioan ^a   Pandele, Andreea Madalina ^a   Dinescu, Sorina ^b   Predoiu, Loredana ^b   Galateanu, Bianca ^b,c   Hermenean, Anca ^c   Costache, Marieta ^b  

^a UNIVERSITY POLITEHNICA OF BUCHAREST   (Romania)

^b UNIVERSITY OF BUCHAREST   (Romania)

^c VASILE GOLDIS WESTERN UNIVERSITY OF ARAD   (Romania)

Author keywords

A. Carbon carbon composites (CCCs); B. Mechanical properties; B. Thermal properties; In vitro biocompatibility

Indexed keywords

BIOACTIVITY; BIOCOMPATIBILITY; BIOLOGICAL MATERIALS; BIOMECHANICS; CARBON; CARBON CARBON COMPOSITES; CELL CULTURE; CELL PROLIFERATION; ETHANOL; MECHANICAL PROPERTIES; MEMBRANES; STEM CELLS; TENSILE TESTING; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

CELL VIABILITY; DISTILLED WATER; IN-VITRO; MECHANICAL PERFORMANCE; MESENCHYMAL STEM CELL; PHASE-INVERSION METHOD; WATER FLUX;

COMPOSITE MEMBRANES;

EID: 84921807375     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2014.11.040     Document Type: Article

References (32)

1. Koseoglu-Imer DY. The determination of performances of polysulfone (PS) ultrafiltration membranes fabricated at different evaporation temperatures for the pretreatment of textile wastewater. Desalination 2013;316:110-9.
2. Kung FC, Yang MC. The effect of covalently bonded conjugated linoleic acid on the reduction of oxidative stress and blood coagulation for polysulfone hemodialyzer membrane. Int J Biol Macromol 2006;38:157-64.
3. Temtem M, Casimiro T, Ricardo AA. Solvent power and depressurization rate effects in the formation of polysulfone membranes with CO2-assisted phase inversion method. J Membr Sci 2006;283:244-52.
4. Hołda AK, Aernouts B, Saeys W, Vankelecom IFJ. Study of polymer concentration and evaporation time as phase inversion parameters for polysulfone-based SRNF membranes. J Membr Sci 2013;442:196-205.
5. Nair AK, Isloor AM, Kumar R, Ismail AF. Antifouling and performance enhancement of polysulfone ultrafiltration membranes using CaCO3 nanoparticles. Desalination 2013;322:69-75.
6. Kim S, Chen L, Johnson JK, Marand E. Polysulfone and functionalized carbon nanotube mixed matrix membranes for gas separation: theory and experiment. J Membr Sci 2007;294:147-58.
7. Junaidi MUM, Leo CP, Ahmad AL, Kamal SNM, Chew TL. Carbon dioxide separation using asymmetric polysulfone mixed matrix membranes incorporated with SAPO-34 zeolite. Fuel Process Technol 2014;118:125-32.
8. Liu F, Ma BR, Zhou D, Xiang YH, Xue LX. Breaking through tradeoff of Polysulfone ultrafiltration membranes by zeolite 4A. Micropor Mesopor Mater 2014;186:113-20.
9. Ahn J, Chung WJ, Pinnau I, Guiver MD. Polysulfone/silica nanoparticle mixed-matrix membranes for gas separation. J Membr Sci 2008;314:123-33.
10. Mollahosseini A, Rahimpour A, Jahamshahi M, Peyravi M, Khavarpour M. The effect of silver nanoparticle size on performance and antibacteriality of polysulfone ultrafiltration membrane. Desalination 2012;306:41-50.
11. Zhang G, Lu S, Zhang L, Meng Q, Shen C, Zhang J. Novel polysulfone hybrid ultrafiltration membrane prepared with TiO2-g-HEMA and its antifouling characteristics. J Membr Sci 2013;463:163-73.
12. Magueijo VM, Anderson LG, Fletcher AJ, Shilton SJ. Polysulfone mixed matrix gas separation hollow fiber membranes filled with polymer and carbon xerogels. Chem Eng Sci 2013;92:13-20.
13. Yin J, Zhu G, Deng B. Multi-walled carbon nanotubes (MWNTs)/polysulfone (PSU) mixed matrix hollow fiber membranes for enhanced water treatment. J Membr Sci 2013;437:237-48.
14. Skoulidas AI, Ackerman DM, Johnson JK, Sholl DS. Rapid transport of gases in carbon nanotubes. Phys Rev Lett 2012;89:185901.
15. Holt JK, Park HG, Wang Y, Stadermann M, Artyukhin AB, Grigoropoulos CP, et al. Fast mass transport through sub-2-nanometer carbon nanotubes. Science 2006;312:1034-7.
16. Vatanpour V, Esmaeili M, Farahani MHDA. Fouling reduction and retention increment of polyethersulfone nanofiltration membranes embedded by amine-functionalized multi-walled carbon nanotubes. J Membr Sci 2014;466:70-81.
17. Shiu SC, Tsai JL. Characterizing thermal and mechanical properties of graphene/epoxy nanocomposites. Compos Part B - Eng 2014;56:691-7.
18. Jang HK, Kim HI, Dodge T, Sun P, Zhu H, Nam JD, et al. Interfacial shear strength of reduced graphene oxide polymer composites. Carbon 2014;77:390-7.
19. Stankovich S, Piner RD, Nguyen SBT, Ruof RS. Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets. Carbon 2006;44:3342-7.
20. Pei S, Cheng HM. The reduction of graphene oxide. Carbon 2012;50:3210-28.
21. Tian M, Qu L, Zhang X, Zhang K, Zhu S, Guo X, et al. Enhanced mechanical and thermal properties of regenerated cellulose/graphene composite fibers. Carbohyd Polym 2014;111:456-62.
22. Yadav M, Rhee KY, Park SJ. Synthesis and characterization of grapheneoxide/carboxymethylcellulose/alginate composite blend films. Carbohyd Polym 2014;110:18-25.
23. Ganesh BM, Isloor AM, Ismail AF. Enhanced hydrophilicity and salt rejection study of graphene oxide-polysulfone mixed matrix membrane. Desalination 2013;313:199-207.
24. Ionita M, Pandele AM, Crica L, Pilan L. Improving the thermal and mechanical properties of polysulfone by incorporation of graphene oxide. Compos Part B - Eng 2014;59:133-9.
25. Pandele AM, Ionita M, Crica L, Dinescu S, Costache M, Iovu H. Synthesis, characterization, and in vitro studies of grapheneoxide/chitosan-polyvinyl alcohol films. Carbohyd Polym 2014;102:813-20;
26. Kim HJ, Fouda AE, Jonasson K. In situ study on kinetic behavior during asymmetric membrane formation via phase inversion process using Raman spectroscopy. J Appl Polym Sci 2000;75:135-41.
27. Warner JH, Schäffel F, Bachmatiuk A, Rümmeli MH. Characterisation techniques. Graphene fundamentals and emergent applications, Graphene International Conference & Exhibition Poster Book, 2014. p. 229-332 [chapter 5].
28. Ionita M, Pandele AM, Iovu H. Sodium alginate/graphene oxide composite films with enhanced thermal and mechanical properties. Carbohyd Polym 2013;94:339-44.
29. Khana U, O'Neilla A, Porwala H, Maya P, Nawazb K, Coleman JN. Size selection of dispersed, exfoliated graphene flakes by controlled centrifugation. Carbon 2012;50:470-5.
30. Rani S, Kumar M, Kumar R, Kumar R, Sharma S, Singh G. Characterization and dispersibility of improved thermally stable amide functionalized graphene oxide. Mater Res Bull 2014;60:143-9.
31. Eigler S, Grimm S, Hirsch A. Investigation of the thermal stability of the carbon framework of graphene oxide. A Eur J 2014;20:984-9.
32. Chakraborty S, Pionteck J, Krause B, Banerjee S, Voit B. Influence of different carbon nanotubes on the electrical and mechanical properties of melt mixed poly(ether sulfone)-multi walled carbon nanotube composites. Compos Sci Technol 2012;72:1933-40.