Modeling of Hydrogen Transport in Static and Rolling Contact

Tribology Transactions

Volumn 58, Issue 2, 2015, Pages 260-273

  Kadin, Yuri ^a  

^a SKF ENGINEERING AND RESEARCH CENTRE   (Netherlands)

Author keywords

Diffusion; Finite Elements; Hydrogen; Rolling Contact

Indexed keywords

DIFFUSION; FINITE ELEMENT METHOD; FRICTION; HYDROGEN; HYDROGEN EMBRITTLEMENT; STRENGTH OF MATERIALS; THERMOELECTRICITY;

CRACK INITIATION AND PROPAGATION; DIMENSIONLESS PARAMETERS; FINITE-ELEMENT STUDY; GOVERNING EQUATIONS; HYDROGEN DIFFUSION; MATERIAL TOUGHNESS; ROLLING CONTACT LOADING; ROLLING CONTACTS;

ROLLING;

EID: 84921504913     PISSN: 10402004     EISSN: 1547397X     Source Type: Journal    
DOI: 10.1080/10402004.2014.968698     Document Type: Article

References (42)

1. Levesque, G. and Arakere, N.K. (2010), “Empirical Stress Intensity Factors for Surface Cracks under Rolling Contact Fatigue,” Tribology Transactions, 53(4), pp 621–629.
2. Warhadpande, A., Sadeghi, F., Evans, R.D., and Kotzalas, M.N. (2012), “Influence of Plasticity-Induced Residual Stresses on Rolling Contact Fatigue,” Tribology Transactions, 55(4), pp 422–437.
3. Imai, Y., Endo, T., Dong, D., and Yamamoto, Y. (2010), “Study on Rolling Contact Fatigue in Hydrogen Environment at a Contact Pressure below Basic Static Load Capacity,” Tribology Transactions, 53(5), pp 764–770.
4. Ciruna, J.A. and Szieleit, H.J. (1973), “The Effect of Hydrogen on the Rolling Contact Fatigue Life of AISI 52100 and 440C Steel Balls,” Wear, 24(1), pp 107–118.
5. Kohara, M., Kawamura, T., and Egami, M. (2006), “Study on Mechanism of Hydrogen Generation from Lubricants,” Tribology Transactions, 49(1), pp 53–60.
6. Okumura, T. and Sugimure, J. (2009), “Molecular Dynamics Simulation of Gas Molecules Dissolved in Lubricant under Shear,” Tribology Online, 4(4), pp 92–95.
7. Lund, T.B. (2010), “Sub-Surface Initiated Rolling Contact Fatigue-Influence of Non-Metallic Inclusions, Processing History, and Operating Conditions,” Journal of ASTM International, 7(5), pp 81–96.
8. Vegter, R.H. and Slycke, J.T. (2009), “The Role of Hydrogen on Rolling Contact Fatigue Response of Rolling Element Bearings,” Journal of ASTM International, 7(2), 1–12.
9. Tamada, K. and Tanaka, H. (1996), “Occurrence of Brittle Flaking on Bearings Used for Automotive Electrical Instruments and Auxiliary Devices,” Wear, 199, pp 245–252.
10. Kino, N. and Otani, K. (2003), “The Influence of Hydrogen on Rolling Contact Fatigue and Its Improvement,” JSAE Review, 24, pp 289–294.
11. Gegner, J. and Nierlich, W. (2011), “Hydrogen Accelerated Classical Rolling Contact Fatigue and Evaluation of Residual Stress Response,” Materials Science Forum, 681, pp 249–254.
12. Hamada, H. and Matsubara, Y. (2006), “The Influence of Hydrogen on Tension–Compression and Rolling Contact Fatigue Properties of Bearing Steel,” NTN Technical Review, 74, pp 54–61.
13. Oriani, R.A. (1987), “Hydrogen—The Versatile Embrittler,” Corrosion, 43(7), pp 390–397.
14. Jiang, D.E. and Carter, E.A. (2004), “First Principles Assessment of Ideal Fracture Energies of Materials with Mobile Impurities: Implications for Hydrogen Embrittlement of Metals,” Acta Materialia, 52, pp 4801–4807.
15. Serebrinsky, S., Carter, E.A., and Ortiz, M. (2004), “A Quantum-Mechanically Informed Continuum Model of Hydrogen Embrittlement,” Journal of the Mechanics and Physics of Solids, 52, pp 2403–2430.
16. Thomas, R.L. S., Scully, J.R., and Gangloff, R.P. (2003), “Internal Hydrogen Embrittlement of Ultrahigh-Strength AERMET 100 Steel,” Metallurgical and Materials Transactions, 34A, pp 327–344.
17. Li, Y.D., Yang, Z.G., Liu, Y.B., Li, S.X., Li, G.Y., Hui, W.J., and Weng, Y.Q. (2008), “The Influence of Hydrogen on Very High Cycle Fatigue Properties of High Strength Spring Steel,” Materials Science and Engineering A, 489(1–2), pp 373–379.
18. Chen, Q., Hahn, G.T., Rubin, C.A., and Bhargava, V. (1988), “The Influence of Residual Stresses on Rolling Contact Mode II Driving Force in Bearing Raceways,” Wear, 126(1), pp 17–30.
19. Kabo, E. (2002), “Material Defects in Rolling Contact Fatigue—Influence of Overloads and Defect Clusters,” International Journal of Fatigue, 24, pp 887–894.
20. Dehghan, H., Mahdavi, E., and Heyhat, M.M. (2011), “Hydrogen Embrittlement in a Coupled Mass Diffusion with Stress Near a Blunting Crack Tip for AISI 4135 Pressure Vessel,” Proceedings of the World Academy of Science, Engineering and Technology, 58, pp 909–916.
21. Yajiang, L., Juan, W., Jicai, F., and Xiaoqin, S. (2005), “Finite Element Modeling of Hydrogen Diffusion in Fusion Zone of HQ130 High Strength Steel,” Journal of Materials Processing Technology, 161(3), pp 423–429.
22. Vergara, D., Lorenzo, M., Kharin, V., and Toribio, J. (2005) “Two-Dimensional Numerical Modeling of Hydrogen Diffusion Assisted by Stress and Strain,” Anales de Mecánica de la Fractura, 22, pp 87–92.
23. Ebihara, K.I., Itakura, M., Yamaguchi, M., Kaburaki, H., and Suzudo, T. (2011), “Evaluation of Stress and Hydrogen Concentration at Grain Boundary of Steels Using Three-Dimensional Polycrystalline Model,” Progress in Nuclear Science and Technology, 2, pp 38–43.
24. Kim, S.K., Lee, C.S., Kim, M.H., and Lee, J.M. (2012), “Numerical Analysis of Hydrogen Transport Using a Hydrogen-Enhanced Localized Plasticity Mechanism,” Proceedings of the World Academy of Science, Engineering and Technology, 58, pp 398–401.
25. Kanayama, H., Ndong-Mefane, S., Ogino, M., and Miresmaeili, R. (2009), “Reconsideration of the Hydrogen Diffusion Model Using the McNabb-Foster Formulation,” Memoirs of the Faculty of Engineering, Kyushu University, 69(4), pp 149–161.
26. Winzer, N. and Khader, I. (2013), “Hydrogen Diffusion and Trapping in Bodies Undergoing Rolling Contact,” Wear, 303(1–2), pp 451–458.
27. Kadin, Y. (2013), “Modeling of Hydrogen Transport in Rolling Contact Fatigue Conditions,” Procedia Engineering, 66, pp 415–424.
28. Turnbull, A., Carroll, M. W., and Ferriss, D. H. (1989), “Analysis of Hydrogen Diffusion and Trapping in a 13% Chromium Martensitic Stainless Steel,” Acta Metallurgica, 37(7), pp 2039–2046.
29. Sofronis, P. and McMeeking, R.M. (1989), “Numerical Analysis of Hydrogen Transport near a Blunting Crack Tip,” Journal of the Mechanics and Physics of Solids, 37(3), pp 317–350.
30. Lee, K.M., Kim, H.S., and Noh, S.J. (2011), “Hydrogen Permeability, Diffusivity, and Solubility of SUS 316L Stainless Steel in High Temperature Range 400 to 800°C for Fusion Reactor Applications,” Journal - Korean Physical Society, 59(5), pp 3019–3023.
31. Johnson, K.L. (1985), Contact Mechanics, Cambridge University Press, Cambridge, UK.
32. Kadin, Y., Kligerman, I., and Etsion, I. (2006), “Unloading an Elastic–Plastic Contact of Rough Surfaces,” Journal of the Mechanics and Physics of Solids, 54, pp 2652–2674.
33. Oriani, R.A. (1993), “The Physical and Metallurgical Aspects of Hydrogen in Metals,” 4th International Conference on Cold Fusion. Lahaina, Maui, Hawaii. 6–9 December.
34. Harris, T.A. and Kotzalas, M.N. (2007), Rolling Bearing Analysis, 5th ed., Boca Raton, FL: Taylor & Francis.
35. Zaitsev, V.F. and Polyanin, A.D. (2003), Handbook of Exact Solutions for Ordinary Differential Equations, 2nd ed., Chapman & Hall/CRC: Boca Raton, FL.
36. Hirth, J. (1980), “Effect of Hydrogen on the Properties of Iron and Steel,” Metallurgical Transactions, 11A, pp 861–890.
37. Errichello, R., Budny, R., and Eckert, R. (2013), “Investigations of Bearing Failures Associated with White Etching Areas (WEAs) in Wind Turbine Gearboxes,” Tribology Transactions, 56(6), pp 1069–1076.
38. Murakami, Y. (2002), Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions, Elsevier.
39. Melander, A. (1997), “A Finite Element Study of Short Cracks with Different Inclusions Types under Rolling Contact Fatigue Load,” International Journal of Fatigue, 19(1), pp 13–24.
40. Eliaz, N., Banks-Sills, L., Ashkenazi, D., and Eliasi, R. (2004), “Modeling Failure of Metallic Glasses Due to Hydrogen Embrittlement in the Absence of External Loads,” Acta Materialia, 52, pp 93–105.
41. Evans, M.H. (2012), “White Structure Flaking (WSF) in Wind Turbine Gearbox Bearings: Effects of ‘Butterflies’ and White Etching Cracks (WECs),” Materials Science and Technology, 28(1), pp 3–22.
42. Day, D., Vincent, L., Coquillet, B., Guirandenq, P., Chene, P., and Aucouturier, M. (1980), “Hydrogen Embrittlement of a Stainless Ball Bearing Steel,” Wear, 65(1), pp 103–111.