CFD models in the development of electrical waste recycling technologies

Clean Technologies and Environmental Policy

Volumn 16, Issue 7, 2014, Pages 1255-1263

  Egedy, Attila ^a   Fogarasi, Szabolcs ^b   Varga, Tamás ^a   Imre Lucaci, Árpád ^b   Chován, Tibor ^a  

^a UNIVERSITY OF PANNONIA   (Hungary)

^b BABE BOLYAI UNIVERSITY   (Romania)

Author keywords

[No Author keywords available]

Indexed keywords

ELECTRONIC WASTE; LEACHING; METAL RECOVERY; METALS; RECYCLING; WASTE TREATMENT;

CHEMICAL TREATMENTS; COMSOL MULTIPHYSICS; DETAILED MODELING; DISSOLUTION PROCESS; ELECTRICAL WASTES; LEACHING REACTORS; MODELLING STUDIES; REACTOR SYSTEMS;

COMPUTATIONAL FLUID DYNAMICS;

EID: 84920707524     PISSN: 1618954X     EISSN: 16189558     Source Type: Journal    
DOI: 10.1007/s10098-014-0816-6     Document Type: Article

References (31)

1. Babar ZB, Shareefdeen Z (2014) Management and control of air emissions from electronic industries. Clean Technol Environ Policy 16:69-77
2. Behnamfard A, Salarirad MM, Veglio F (2013) Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize palladium and gold leaching and precipitation. Waste Manag 33:2354-2363
3. Bereketli I, Erol Genevois M, Esra Albayrak Y, Ozyol M (2011) WEEE treatment strategies' evaluation using fuzzy LINMAP method. Expert Syst Appl 38:71-79
4. Bigum M, Brogaard L, Christensen TH (2012) Metal recovery from high-grade WEEE: a life cycle assessment. J Hazard Mater 207-208:8-14
5. Chiang S-Y, Wei C-C, Chiang T-H, Chen W-L (2010) How can electronics industries become green manufacturers in Taiwan and Japan. Clean Technol Environ Policy 13:37-47
6. Cui J, Zhang L (2008) Metallurgical recovery of metals from electronic waste: a review. J Hazard Mater 158:228-256
7. Delafosse A, Delvigne F, Collignon M-L, Thonart P, Crine D (2010) Stochastic modeling of a micro-organism displacements in a stirred-tank bioreactor. In: Proceedings of CHISA 2010 Prague P5.76
8. Egedy A, Varga T, Chován T (2013) Compartment model structure identification with qualitative methods for a stirred vessel. Math Comput Model Dyn 19:115-132
9. 2 acidic solutions. Stud Univ Babes-Bol LVII(3):31-40
10. Fogarasi Sz, Imre-Lucaci F, Ilea P (2012b) Metals leaching from waste printed circuit boards. Part II: influence of thiourea, thiosulfate and thiocyanate concentration on the leaching process. Stud Univ Babes-Bol LVII(3):41-49
11. Fogarasi Sz, Imre-Lucaci F, Ilea P (2012c) Eco-friendly leaching of base metals from waste printed circuit boards: experimental study and mathematical modeling. Stud Univ Babes-Bol LVII:91-100
12. Guha D, Dudukovic MP, Ramachandran PA, Mehta S, Alvare J (2006) CFD based compartmental modelling of single phase stirred tank reactors. AIChE J 52:1836-1846
13. Huang K, Guo J, Xu Z (2009) Recycling of waste printed circuit boards: a review of current technologies and treatment status in China. J Hazard Mater 164:399-408
14. x prediction in gas turbine. Chem Technol Environ Policy 12:661-670
15. Kim EY, Kim MS, Lee JC, Pandey BD (2011a) Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process. J Hazard Mater 198:206-215
16. Kim EY, Kim MS, Lee JC, Jeong J, Pandey BD (2011b) Leaching kinetics of copper from waste printed circuit boards by electro-generated chlorine in HCl solution. Hydrometallurgy 107:124-132
17. Kramer HJM, Dijkstra JW, Verheijen PJT, Van Rosmale GM (2000) Modeling of industrial crystallizers for control and design purposes. Powder Technol 108:185-191
18. Li J, Uttarwar RG, Huang Y (2013) CFD-based modeling and design for energy-efficient VOC emission reduction in surface coating systems. Chem Technol Environ Policy 15:1023-1032
19. 3 suspension crystallizer using combination of CFD and multiblock model. Chem Eng Res Des 88:1297-1303
20. Long L, Sun S, Zhong S, Dai W, Liu J, Song W (2010) Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boards. J Hazard Mater 177:626-632
21. Maggioris D, Goulas A, Alexopoulos AH, Chatzi EG, Kiparissides C (2008) Use of CFD in prediction of particle size distribution in suspension polymer reactors. Comput Chem Eng 22:315-322
22. Martinez-Delgadillo S, Mollinedo-Ponce H, Mendoza-Escamilla V, Gutiérrez-Torres C, Jiménez-Bernal J, Barrera-Diaz C (2012) Performance evaluation of an electrochemical reactor used to reduce Cr(VI) from aqueous media applying CFD simulations. J Clean Prod 34:120-124
23. Miltner M, Makaruk A, Harasek M, Friedl A (2008) Computational fluid dynamic simulation of solid biomass combustor: modelling approaches. Clean Technol Environ Policy 10:165-174
24. Oguchi M, Sakanakura H, Terazono A, Takigami H (2012) Fate of metals contained in waste electrical and electronic equipment in a municipal waste treatment process. Waste Manag 32:96-103
25. Smith R (2005) Chemical process design and integration. Wiley, Chichester
26. Tamburini A, Cipollina A, Micale G (2011) CFD simulation of solid liquid suspensions in baffled stirred vessels below complete suspension speed. Chem Eng Trans 24:1435-1440
27. Tuncuk A, Stazi V, Akcil A, Yazici EY, Deveci H (2012) Aqueous metal recovery techniques from e-scrap: hydrometallurgy in recycling. Miner Eng 25:28-37
28. Van Parys H, Tourwé E, Breugelmans T, Fepauw M, Deconick J, Hubin A (2008) Modeling of mass and charge transfer in an inverted rotating disc electrode (IRDE) reactor. J Electroanal Chem 622:44-50
29. Varga T, Abonyi J (2013) Improvement of PSO algorithm by memory based gradient search application in inventory management. Swarm Int Bio Inspired Comput Theory Appl. doi: 10.1016/B978-0-12-405163-8.00019-3
30. Wang J, Bai J, Xu J, Liang B (2009) Bioleaching of metals from printed wire boards by Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans and their mixture. J Hazard Mater 172:1100-1105
31. Yang J, Wu Y, Li J (2012) Recovery of copper particles from metal components of waste printed circuit boards. Hydrometallurgy 121-124:1-6