Soybean oil as a biocompatible multifunctional additive for lubricating oil

ACS Sustainable Chemistry and Engineering

Volumn 3, Issue 1, 2015, Pages 19-25

  Karmakar, Gobinda ^a   Ghosh, Pranab ^a  

^a UNIVERSITY OF NORTH BENGAL   (India)

Author keywords

antiwear; ASTM method; biodegradability; pour point depressant; Thermogravimetric analysis; viscosity index improver

Indexed keywords

ADDITIVES; BIOCOMPATIBILITY; BIODEGRADABILITY; BIODEGRADATION; FOOD ADDITIVES; GEL PERMEATION CHROMATOGRAPHY; OIL SHALE; POLYMERS; STYRENE; THERMODYNAMIC STABILITY; THERMOGRAVIMETRIC ANALYSIS; TRIBOLOGY; VISCOSITY; WEAR RESISTANCE;

ANTI-WEAR; ASTM METHOD; AZOBISISOBUTYRONITRILE; CONVENTIONAL ADDITIVES; MULTIFUNCTIONAL ADDITIVES; MULTIFUNCTIONAL PERFORMANCE; POUR POINT DEPRESSANTS; VISCOSITY INDEX IMPROVERS;

SOYBEAN OIL;

EID: 84920264697     PISSN: None     EISSN: 21680485     Source Type: Journal    
DOI: 10.1021/sc500685r     Document Type: Article

References (39)

1. Florea, M.; Catrinoiu, D.; Paul, L.; Balliu, S. The influence of chemical composition on the pour-point depressant properties of methacrylate copolymers used as additives for lubricating oils Lubr. Sci. 1999, 12, 31-44
2. Mohamed, M. M.; Naga, H. H. A. E.; Meneir, M. F. E. Multifunctional viscosity index improvers Chem. Technol. Biotechnol. 1994, 60, 283-289
3. Nassar, A. M.; Ahmed, N. S.; Kamal, R. S.; Abdel-Azim, A. A.; El-Nagdy, E. I. Preparation and evaluation of acrylate polymers as viscosity index improvers for lube oil Pet. Sci. Technol. 2005, 23 (5) 537-546
4. Alemán-Vázquez, L. O.; Villagómez-Ibarra, J. R. Polyisobutenylsuccinimides as detergents and dispersants in fuel: Infrared spectroscopy application Fuel 2001, 80, 965-968
5. Kajdas, C.; Majzner, M. Effectiveness of selected CHO compounds as antiwear additives to white mineral oils Tribol. Trans. 2005, 48 (1) 93-99
6. Rastogi, R. B.; Maurya, J. L.; Jaiswal, V.; Tiwary, D. Lanthanum dithiocarbamates as potential extreme pressure lubrication additives Int. J. Ind. Chem. 2012, 3 (1) 32-41
7. Mehbad, N. E. Development of antioxidants synthesized by phase transfer catalysts for lubricating oil J. Surf. Eng. Mater. Adv. Technol. 2014, 4, 29-32
8. Abdel-Azim, A. A. A.; Nassar, A. M.; Ahmed, N. S.; Kamal, R. S. Preparation and evaluation of acrylate polymers as pour point depressants for lube oil Pet. Sci. Technol. 2006, 24 (8) 887-894
9. Ghosh, P.; Das, M.; Upadhyay, M.; Das, T.; Mandal, A. Synthesis and evaluation of acrylate polymers in lubricating oil J. Chem. Eng. Data 2011, 56, 3752-3758
10. Boshui, C.; Nan, Z.; Kai, L.; Jianhua, F. Enhanced biodegradability, lubricity and corrosiveness of lubricating oil by oleic acid diethanolamide phosphate Tribol. Ind. 2012, 34 (3) 152-157
11. Balamurugan, K.; Kanagasabapathy, N.; Mayilsamy, K. Studies on soybean oil based lubricant for diesel engines J. Sci. Ind. Res. 2010, 69, 794-797
12. Kumar, G. S.; Balamurugan, A.; Vinu, S.; Radhakrishnan, M.; Senthilprabhu, G. Tribological and emission studies on two stroke petrol engine lubricated with sunflower methyl ester J. Sci. Ind. Res. 2012, 71, 562-565
13. Shanta, S. M.; Molina, G. J.; Soloiu, V. Tribological effects of mineral-oil lubricant contamination with biofuels: A pin-on-disk tribometry and wear study Adv. Tribol. 2011, 10.1155/2011/820795
14. Shahabuddin, M.; Masjuki, H. H.; Kalam, M. A. Experimental investigation into tribological characteristics of biolubricant formulated from Jatropha oil Procedia Eng. 2013, 56, 597-606
15. Mofijur, M.; Masjuki, H. H.; Kalam, M. A.; Shahabuddin, M.; Hazrat, M. A.; Liaquat, A. M. Palm oil methyl ester and its emulsions effect on lubricant performance and engine components wear Energy Procedia 2012, 14, 1748-1753
16. Wu, X.; Zhang, X.; Yang, S.; Chen, H.; Wang, D. The study of epoxidized rapeseed oil used as a potential biodegradable lubricant JAOCS, J. Am. Oil Chem. Soc. 2000, 77, 561-563
17. Sharma, B. K.; Adhvaryu, A.; Erhan, S. Z. Synthesis of hydroxy thio-ether derivatives of vegetable oil J. Agric. Food Chem. 2006, 54 (26) 9866-9872
18. Maleque, M. A.; Masjuki, H. H.; Sapuan, S. M. Vegetable-based biodegradable lubricating oil additives Ind. Lubr. Tribol. 2003, 55 (3) 137-143
19. Ertugrul, D.; Filiz, K. Using cotton seed oil as environmentally accepted lubricant additive Energy Sources 2004, 26, 611-625
20. Kammann, K. P., Jr.; Phillips, A. I. Sulfurized vegetable oil products as lubricant additives JAOCS, J. Am. Oil Chem. Soc. 1985, 62, 917-923
21. Ghosh, P.; Das, T.; Karmakar, G.; Das, M. Evaluation of acrylate-sunflower oil copolymer as viscosity index improvers for lube oils J. Chem. Pharm. Res. 2011, 3, 547-556
22. Ghosh, P.; Das, T.; Nandi, D.; Karmakar, G.; Mandal, A. Synthesis and characterization of biodegradable polymer-Used as a pour point depressant for lubricating oil Int. J. Polym. Mater. 2010, 59, 1008-1017
23. Karmakar, G.; Ghosh, P. Green additives for lubricating oil ACS Sustainable Chem. Eng. 2013, 1, 1364-1370
24. Roegiers, M.; Zhang, H.; Zhmud, B. Elektrionized vegetable oils as lubricity components in metalworking lubricants FME Trans. 2008, 36, 133-138
25. Li, W.; Jiang, C.; Chao, M.; Wang, X. Natural garlic oil as a high-performance, environmentally friendly, extreme pressure additive in lubricating oils ACS Sustainable Chem. Eng. 2014, 2, 798-803
26. Biresaw, G.; Asadauskas, S. J.; McClure, T. G. Polysulfide and biobased extreme pressure additive performance in vegetable vs paraffinic base oils Ind. Eng. Chem. Res. 2012, 51, 262-273
27. Baughman, W. F.; Jamieson, G. S. The chemical composition of soya bean oil J. Am. Chem. Soc. 1922, 44, 2947-2952
28. Ghosh, P.; Das, T.; Nandi, D. Synthesis characterization and viscosity studies of homopolymer of methyl methacrylate and copolymer of methyl methacrylate and styrene J. Solution Chem. 2011, 40, 67-78
29. Onyeji, L. I.; Aboje, A. A. The effect of additive on the viscosity index of lubricating oil (engine oil) Int. J. Eng. Sci. Technol. 2011, 3 (3) 1864-1869
30. Wen, X.; Lu, X. Microbial degradation of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in soil J. Polym. Environ. 2012, 20, 381-387
31. Kim, H. S.; Kim, H. J.; Lee, J. W.; Choi, I. G. Biodegradability of bio-flour filled biodegradable poly(butylene succinate) bio-composites in natural and compost soil Polym. Degrad. Stab. 2006, 91, 1117-1127
32. Chandure, A. S.; Umare, S. S. Synthesis, characterization and biodegradation study of low molecular weight polyesters Int. J. Polym. Mater. 2007, 56, 339-353
33. Parambil, A. M.; Puttaiahgowda, Y. M.; Shankarappa, P. Copolymerization of N-vinyl pyrrolidone with methyl methacrylate by Ti(III)-DMG redox initiator Turk. J. Chem. 2012, 36, 397-409
34. Lu, Y.; Larock, R. C. Novel polymeric materials from vegetable oils and vinyl monomers: Preparation, properties, and applications ChemSusChem 2009, 2, 136-147
35. Pourhossaini, M. R.; Vasheghani-Farahani, E.; Gholamian, M.; Gholamian, M. Synthesis and characterization of olefin copolymers as viscosity modifiers for engine oil Iran. Polym. J. 2005, 14 (6) 549-557
36. Tanveer, S.; Sharma, U. C.; Prasad, R. Rheology of multigrade engine oils Indian J. Chem. Technol. 2006, 13, 180-184
37. Sharma, B. K.; Adhvaryu, A.; Erhan, S. Z. Friction and wear behavior of thioether hydroxy vegetable oil Tribol. Int. 2009, 42, 353-358
38. Kuzmić, A. E.; Radošević, M.; Bogdanić, G.; Sricá, V.; Vuković, R. Studies on the influence of long chain acrylic esters polymers with polar monomers as crude oil flow improver additives Fuel 2008, 87, 2943-2950
39. Soldi, R. A.; Oliveira, A. R. S.; Barbosa, R. V.; César-Oliveira, M. A. F. Polymethacrylates: Pour point depressants in diesel oil Eur. Polym. J. 2007, 43 (8) 3671-3678