Convective Heat Transfer Enhancement: Mechanisms, Techniques, and Performance Evaluation

Advances in Heat Transfer

Volumn 46, Issue , 2014, Pages 87-186

  He, Ya Ling ^a   Tao, Wen Quan ^a  

^a Xi an Jiaotong University)   (China)

Author keywords

Convective heat transfer; Enhancement of heat transfer; Field synergy principle; Performance comparison plot; Single phase flow; Thermohydraulic performance; Waste heat recovery

Indexed keywords

EID: 84919497510     PISSN: 00652717     EISSN: None     Source Type: Book Series    
DOI: 10.1016/bs.aiht.2014.09.001     Document Type: Article

References (130)

1. Yang S.M., Tao W.Q. Heat Transfer 2006, Higher Education Press, Beijing, (in Chinese). fourth ed.
2. Yearbook of Energy Statistics of China 2011, Department of Energy Statistics of National Statistics Bureau of China, Chinese Statistics Press, Beijing, p. 109 (in Chinese).
3. Study on the Current State of Industrial Energy-saving and the Measurements 2010, Division of Chinese Academy of Science, Academicians and Department, 25, pp. 307-309 (in Chinese).
4. Kays W.M., Crawford M.E., Weigand B. Convective Heat and Mass Transfer 2005, McGraw-Hill, Boston. fourth ed.
5. Miheev M.A. Fundamentals of Heat Transfer 1956, National Energy Press, Moskow, (in Russian). third ed.
6. Yang S.M., Chen D.X. Heat Transfer 1961, Chinese Mechanical Engineering Publisher, Beijing, (in Chinese).
7. Grober H., Erk S., Grigull U. Fundamentals of Heat Transfer 1961, McGraw-Hill, New York.
8. Kutateladse S.S. Basic Theory of Heat Transfer 1962, National Science-Technological Press, Moscow, (in Russian).
9. Eckert E.R.G., Drake R.M. Analysis of Heat and Mass Transfer 1972, McGraw-Hill Kogakusha, Ltd, Tokyo. International student ed.
10. Holman J.P. Heat Transfer 1976, McGraw-Hill Book Company, New York. fourth ed.
11. Cheng K.C., Fujii T. Review and some observation on the historical development ofheat transfer from Newton to Eckert-1700-1960. History of Heat Transfer, Essays in Honor of the 50th Anniversary oftheASME Heat Transfer Division 1988, ASME Heat Transfer Division, New York. E.T. Layton, J.H. Lienhard (Eds.).
12. Bergles A.E., Morton H.L. Survey and Evaluation of Techniques to Augment Convection Heat Transfer 1965, Engineering Projects Laboratory Report HTL 5382-34, Massachusetts Institute of Technology, Cambridge, MA.
13. Li Z.X., Guo Z.Y. Optimization principles for heat convection. Advances in Transport Phenomena 2010 2011, Springer-Verlag, Berlin Herderberg. L.Q. Wang (Ed.).
14. Bergles A.E., Webb R.L., Junkhan G.H. Energy conservation via heat transfer enhancement. Energy 1979, 4:193-200.
15. Bergles A.E. Heat transfer enhancement - the maturing of second-generation heat transfer technology. Heat Transfer Eng. 1997, 18(1):47-55.
16. Bergles A.E. Enhanced heat transfer: endless frontier, or mature and routine?. J.Enhanced Heat Transfer 1999, 6(2-4):79-88.
17. Bergles A.E. ExHFT for fourth generation heat transfer technology. Exp. Therm. Fluid Sci. 2002, 26(2-4):335-344.
18. Manglik R.M., Bergles A.E. Enhanced heat and mass transfer in the new millennium: a review of the 2001 literature. J.Enhanced Heat Transfer 2004, 11(2):87-118.
19. Bergman T.L., Lavine A.S., Incropera F.K., DeWitt D.P. Introduction to Heat Transfer 2011, John Wiley & Sons, Inc., Hoboken, NJ. sixth ed.
20. Cengel Y.A., Ghajar A.J. Heat and Mass Transfer, Fundamentals and Applications 2011, McGraw-Hill, New York. fourth ed.
21. Manglik R.M. Heat transfer enhancement. HeatTransfer Handbook 2003, 1029-1130. John Wiley & Sons, Inc., Hoboken, New Jesey. A. Bejan, A.D. Kraus (Eds.).
22. Webb R.L., Kim N.H. Principles of Enhanced Heat Transfer 2005, Taylor & Francis, Boca Raton. second ed.
23. Bergles A.E., Manglik R.M. Current progress and new developments in enhanced heat and mass transfer. J. Enhanced Heat Transfer 2013, 20(1):1-15.
24. Wang S., Li Z.X., Guo Z.Y. Novel concept and device of heat transfer augmentation. Heat Transfer-1998, Proceedings of the Eleventh International Conference on Heat Transfer, Kyongju, Korea 1998, 405-408. S.T. Ro, K.S. Lee (Eds.).
25. Guo Z.Y., Li D.Y., Wang B.X. A novel concept for convective heat transfer enhancement. Int. J. Heat Mass Transfer 1998, 41(14):2221-2225.
26. Guo Z.Y., Wang S. Novel concept and approaches of heat transfer enhancement. Proceedings of Symposium on Energy Engineering in the 21st Century 2000, 119-126. Begell House, New York. P. Cheng (Ed.).
27. Guo Z.Y. Mechanism and control of convective heat transfer - coordination of velocity and heat flow fields. Chin. Sci. Bull. 2001, 46(7):596-599. (in Chinese).
28. Webster's New World Dictionary of American English 1994, Prentice Hall, New York. third college ed. V. Neufeldt (Ed.).
29. Tao W.Q., Guo Z.Y., Wang B.X. Field synergy principle for enhancing convective heat transfer - its extension and numerical verifications. Int. J. Heat Mass Transfer 2002, 45(18):3849-3856.
30. Guo Z.Y., Tao W.Q., Shah R.K. The field synergy (coordination) principle and its applications in enhancing single phase convective heat transfer. Int. J. Heat Mass Transfer 2005, 48(9):1797-1807.
31. Tao W.Q., He Y.L., Wang Q.W., Qu Z.G., Song F.Q. A unified analysis on enhancing single phase convective heat transfer with field synergy principle. Int. J. Heat Mass Transfer 2002, 45(24):4871-4879.
32. Guo Z.Y. Coordination of velocity and flow fields in heat exchangers. Compact Heat Exchangers: A Festschrift on the 60th Birthday of Ramesh K. Shah 2002, 177-182. PIZA, Edizioni ETS, Italy. S.G. Kandlikar (Ed.).
33. Wu J.M., Tao W.Q. Numerical study on laminar convection heat transfer in a rectangular channel with longitudinal vortex generator. Part A: verification of field synergy principle. Int. J. Heat Mass Transfer 2008, 51(5-6):1179-1191.
34. Wu J.M., Tao W.Q. Numerical study on laminar convection heat transfer in a channel with longitudinal vortex generator. Part B: parametric study of major influence factors. Int. J. Heat Mass Transfer 2008, 51(13-14):3683-3692.
35. Wong K.W., Hung Y.M. Field synergy principle in forced convection of plane Couette-Poiseuille flows with effect of thermal asymmetry. Int. Commun. Heat Mass Transfer 2012, 39:1181-1187.
36. He Y.L., Tao W.Q. Numerical studies on the inherent interrelationship between field synergy principle and entransy dissipation extreme principle for enhancing convective heat transfer. Int. J. Heat Mass Transfer 2014, 74:196-206.
37. Habchi C., Lemenand T., Valle D.D., Pacheco L., Le Corre O., Peerhossaini H. Entropy production and field synergy principle in turbulent vortical flows. Int. J. Therm. Sci. 2011, 50:2365-2376.
38. He Y.L., Tao W.Q., Song F.Q., Zhang W. Three-dimensional numerical study of heat transfer characteristics of plain plate fin-and-tube heat exchangers from view point of field synergy principle. Int. J. Heat Fluid Flow 2005, 26:459-473.
39. Bergles A.E., Nirmalan V., Junkhan G.H., Webb R.L. Bibliography on Augmentation of Convective Heat and Mass Transfer II December 1983, Heat Transfer Laboratory Report HTL-31, ISU-ERI-Ames-84221, Iowa State University, Ames.
40. Fu W.S., Tseng C.C., Huang C.S. Experimental study of the heat transfer enhancement of an outer tube with an inner-tube insertion. Int. J. Heat Mass Transfer 1995, 38(18):3443-3454.
41. Bergles A.E. Recent developments in enhanced heat transfer. Heat Mass Transfer 2011, 47:1001-1008.
42. Marner W.J., Bergles A.E., Chenoweth J.M. On the presentation of performance data for enhanced tubes used in shell-and-tube heat exchangers. ASME J. Heat Transfer 1985, 105:358-365.
43. Fan J.F., Ding W.K., Zhang J.F., He Y.L., Tao W.Q. A performance evaluation plot of enhanced heat transfer techniques oriented for energy-saving. Int. J. Heat Mass Transfer 2009, 52:33-44.
44. A.E. Bergles, Techniques to enhance heat transfer, in: W.M. Rohsenow, J.P. Hartnett, Y.I. Cho (Eds.), Handbook of Heat Transfer, third ed., McGraw-Hill, NewYork, 1998 (Chapter 11).
45. Sparrow E.M., Tao W.Q. Symmetric vs. asymmetric periodic disturbances at walls of a heated flow passage. Int. J. Heat Mass Transfer 1984, 27(11):2133-2144.
46. Huang H.Z., Tao W.Q. An experimental study on heat/mass transfer and pressure drop characteristics for arrays of non-uniform plate length positioned obliquely to the flow direction. ASME J. Heat Transfer 1993, 115(3):568-575.
47. Lue S.S., Huang H.Z., Tao W.Q. Experimental study on heat transfer and pressure drop in the developing region for arrays of obliquely positioned plates of non-uniform length. Exp. Therm. Fluid Sci. 1993, 7(1):30-38.
48. Yuan Z.Z., Tao W.Q., Wang Q.W. Numerical prediction for laminar forced convection heat transfer in parallel plate channels with streamwise periodic rod disturbances. Int. J. Numer. Methods Fluids 1998, 28:1371-1387.
49. Yu B., Nie J.H., Wang Q.W., Tao W.Q. Experimental study on the pressure drop and heat transfer characteristics of tubes with internal wave-like longitudinal fins. Heat Mass Transfer 1999, 35:65-73.
50. Yu B., Tao W.Q. Pressure drop and heat transfer characteristics of turbulent flow in annular tubes with internal wave-like longitudinal fins. Heat Mass Transfer 2004, 40:643-651.
51. Wang Y., He Y.L., Lei Y.G., Li R. Heat transfer and friction characteristics forturbulent flow of dimpled Y. L.tubes. Chem. Eng. Technol. 2009, 32(6):956-963.
52. Tao Y.B., He Y.L., Wu Z.G., Tao W.Q. Numerical design of an efficient wavy fin surface based on the local heat transfer coefficient study. J. Enhanced Heat Transfer 2007, 14(4):315-332.
53. Wu Wenhua, France D.M., Timofeeva E.V., Singh D., Routbort J.L. Comparative review of heat transfer of nanofluids. Int. J. Heat Mass Transfer 2012, 55:5380-5396.
54. Li Q., Flamant G., Yuan X.G., Neveu P., Luo L.G. Compact heat exchangers: a review and future applications for a new generation of high temperature solar receivers. Renewable Sustainable Energy Rev. 2011, 15:4855-4875.
55. Lan J.B., Xie Y.H., Zhang D. Flow and heat transfer in microchannels with dimples and protrusions. ASME J. Heat Transfer 2012, 134:021901-1-021901-9.
56. Sreenivasulu T., Prasad B.V.S.S.S. Flow and heat transfer characteristics in an annulus wrapped with a helical wire. Int. J. Therm. Sci. 2009, 48:1377-1391.
57. Wang X., Song F.Q., Qu Z.G., He Y.L., Tao W.Q. Verifications of field synergy principle in elliptic flows. J. Eng. Thermophys. 2002, 23(1):59-62. (in Chinese).
58. Tao W.Q., He Y.L. Field Synergy Principle and its Applications in Enhancing Heat Transfer and Improving Performance of Pulse Tube Refrigerator (I) 2002, vol. 36(11). J.Xi'an Jiaotong University, pp. 1101-1105 (in Chinese).
59. He Y.L., Tao W.Q. Field Synergy Principle and its Applications in Enhancing Heat Transfer and Improving Performance of Pulse Tube Refrigerator (II) 2002, vol. 36(11). J.Xi'an Jiaotong University, pp. 1106-1110 (in Chinese).
60. Shen S., Liu W., Tao W.Q. Analysis of field synergy on natural convective heat transfer in porous medium. Int. Commun. Heat Mass Transfer 2003, 30(8):1081-1090.
61. Qu Z.G., He Y.L., Tao W.Q. 3D numerical simulation of heat transfer characteristics for slotted fin surface field synergy principle analysis. J. Eng. Thermophys. 2003, 24(5):825-827. (in Chinese).
62. Zeng M., Tao W.Q. Numerical verification of the field synergy principle for turbulent flow. J. Enhanced Heat Transfer 2004, 11(4):451-457.
63. Zhao T.S., Song Y.J. Forced convection in a porous medium heated by a permeable wall perpendicular to flow direction: analysis and measurements. Int. J. Heat Mass Transfer 2001, 44:1031-1037.
64. Shi M.H., Wang H., Hao Y.L. Investigation of forced convection heat transfer in porous medium under centrifugal force. J. Eng. Thermophys. 2002, 23(1):59-62. (in Chinese).
65. Ma L.D., Li Z.Y., Tao W.Q. Experimental verification of the filed synergy principle. Int. Commun. Heat Mass Transfer 2007, 34(3):269-276.
66. Yu Z.Q., Feng Y.L., Zhou W.J., Jin Y., Li M.J., Li Z.Y., Tao W.Q. Numerical research of flow and heat transfer characteristics in the combined porous materials. Appl. Energy 2013, 112:1367-1375.
67. Nellis G., Klein S. Heat Transfer 2009, Cambridge University Press, New York.
68. U.S. Patent Aug 21, 1979, No.4164851, Apparatus for Cooling Beverage Containers and the like.
69. Li Z.X., Guo Z.Y. Field Synergy Principle for Optimization of Convective Heat Transfer 2010, Science Press, Beijing, Section 2.3 (in Chinese).
70. Martin H. Heat and mass transfer between impinging gas jets and solid surfaces. Advances in heat transfer 1977, vol. 13:1-60.
71. Viskanta R. Heat transfer to impinging isothermal gas and flame jets. Exp. Therm. Fluid Sci. 1993, 6:111-134.
72. Fan J.F., Ding W.K., He Y.L., Tao W.Q. Three-dimensional numerical study of fluid and heat transfer characteristics of dimple fin surfaces. Numer. Heat Transfer Part A 2012, 62:271-294.
73. Jin Y., Tang G.H., He Y.L., Tao W.Q. Parametric study and field synergy principle analysis of H-type finned tube bank with 10 rows. Int. J. Heat Mass Transfer 2013, 60:241-251.
74. Cheng Y.P., Qu Z.G., Tao W.Q., He Y.L. Numerical design of efficient slotted fin surface based on the field synergy principle. Numer. Heat Transfer Part A 2004, 45(6):517-538.
75. Qu Z.G., Tao W.Q., He Y.L. Three dimensional numerical simulation on laminar heat transfer and fluid flow characteristics of strip fin surfaces with X-arrangement of strips. ASME J. Heat Transfer 2004, 126(4):697-707.
76. Zhou J.J., Tao W.Q. Three-dimensional numerical simulation and analysis of the airside performance of slotted fin surfaces with radial strips. Eng. Comput. 2005, 22(7/8):940-957.
77. Tao W.Q., Jin W.W., He Y.L., Qu Z.G., Zhang C.C. Optimum design of two-row slotted fin surface with X-shape strip arrangement positioned by "Front Coarse and Rear Dense" principle, Part 1: physical and mathematical models and numerical methods. Numer. Heat Transfer Part B 2006, 50(8):731-750.
78. Jin W.W., He Y.L., Qu Z.G., Zhang C.C., Tao W.Q. Optimum design of two-row slotted fin surface with X-shape strip arrangement positioned by "Front Coarse and Rear Dense" principle, Part 2: results and discussion. Numer. Heat Transfer, Part B, Part A 2006, 50(8):751-772.
79. Fiebig M., Valencia A., Mitra N.K. Wing-type vortex generators for fin-and-tube heat exchangers. J. Exp. Therm. Fluid Sci. 1993, 7(4):287-295.
80. Fiebig M. Embedded vortices in internal flow-heat transfer and pressure loss enhancement. Int. J. Heat Fluid Flow 1995, 16(5):376-388.
81. Fiebig M. Vortices generators and heat transfer. Chem. Eng. Res. Des. 1998, 76(2):108-123.
82. Jacobi A.M., Shah R.K. Heat transfer surface enhancement through the use of longitudinal vortex - a review of recent progress. Exp. Therm. Fluid Sci. 1995, 11(3):295-309.
83. Wang Q.Q., Chen Q.Y., Wang L., Zeng M., Huang Y., Xiao Z. Experimental study of heat transfer enhancement in narrow rectangular channel with longitudinal vortex generator. Nucl. Eng. Des. 2007, 27(7):686-693.
84. He Y.L., Zhang Y.W. Advances and outlook of heat transfer enhancement by longitudinal vortex generators. Advances in Heat Transfer 2012, vol. 44:119-185.
85. Tian L.T., He Y.L., Lei Y.G., Tao W.Q. Numerical study of fluid flow and heat transfer in a flat-plate channel with longitudinal vortex generators by applying field synergy principle analysis. Int. Commun. Heat Mass Transfer 2009, 36:111-120.
86. Chu P., He Y.L., Tao W.Q. Three-dimensional numerical study of flow and heat transfer enhancement using vortex generators in fin-and-tube heat exchangers. ASME J. Heat Transfer 2009, 131:091903-1-091903-9.
87. Chu P., He Y.L., Lei Y.G., Tian L.T., Li R. Three-dimensional numerical study on fin-and-oval tube heat exchanger. Appl. Thermal Eng. 2009, 29:859-876.
88. Lei Y.G., He Y.L., Tian L.T., Chu P., Tao W.Q. Hydrodynamics and heat transfer characteristics of a novel heat exchanger. Chem. Eng. Sci. 2010, 65:1551-1562.
89. He Y.L., Chu P., Tao W.Q., Zhang Y.W., Xie T. Analysis of heat transfer and pressure drops for fin-and-tube heat exchangers with rectangular winglet-type vortex generator. Appl. Therm. Eng. 2013, 61:770-783.
90. 2O nanofluid. Heat Mass Transfer 2009, 45:1323-1333.
91. Cheng Y.P., Lee T.S., Low H.T. Numerical simulation of conjugate heat transfer in electronic cooling and analysis based on field synergy principle. Appl. Therm. Eng. 2008, 28:1826-1833.
92. Leon M.A., Kumar S. Mathematical modeling and thermal performance analysis of unglazed transpired solar collector. Solar Energy 2007, 81:62-73.
93. Sun W., Ji J., He W. Influence of channel depth on the performance of solar air heaters. Energy 2010, 35:4201-4207.
94. Gao L.X., Bai H., Wu X. Numerical analysis of heat transfer in unglazed transpired collectors based field synergy principle. Solar Energy 2013, 95:336-344.
95. He Y.L., Wu M., Tao W.Q., Chen Z.Q. Improvement of the thermal performance of pulse tube refrigerator by using a general principle for enhancing energy transport and conversion processes. Appl. Therm. Eng. 2004, 24:79-93.
96. Nakayama W., Xu L.P. Enhanced fins for air-cooled heat exchangers-Heat transfer and friction factor correlations. Proc. 1983 ASME-JSME Therm. Eng. Conf. 1983, 1:495-502.
97. Hiroaki K., Shinichi I., Osamu A., Osao K. High-efficiency heat exchanger. Natl. Tech. Rep. 1989, 35(6):653-661.
98. Wang C.C., Tao W.H., Chang C.J. An investigation of the air side performance of the slit fin-and-tube heat exchangers. Int. J. Refrig. 1999, 22:595-603.
99. Du Y.J., Wang C.C. An experimental study of the airside performance of the superslit fin-and-tube heat exchangers. Int. J. Heat Mass Transfer 2000, 43:4475-4482.
100. Yun J.Y., Lee K.S. Influence of design parameters on the heat transfer and flow friction characteristics of the heat exchanger with slit fins. Int. J. Heat Mass Transfer 2000, 43:2529-2539.
101. Kang H.C., Kim M.H. Effect of strip location on the air-side pressure drop and heat transfer in strip fin-and-tube heat exchanger. Int. J. Refrig. 1998, 22:302-312.
102. Yildiz G., Bicer Y., Pehlivan D. Heat transfer and pressure drop in a heat exchanger with a helical pipe containing inside springs. Energy Convers. Manage. 1997, 38(6):619-624.
103. DeJong N.C., Jacobi A.M. Flow, heat transfer, and pressure drop in the near-wall region of louvered-fin arrays. Exp. Therm. Fluid Sci. 2007, 27:237-250.
104. Shah R.K., Seculic D.P. Fundamentals of Heat Exchanger Design 2003, John Wiley & Sons, New York, p. 696.
105. Meng J.A. Enhanced heat transfer technology of longitudinal vortices based on field- coordination principle and its application 2003, (Ph.D. thesis), Tsinghua University.
106. Li B., Feng B., He Y.L., Tao W.Q. Experimental study on friction factor and numerical simulation on flow and heat transfer in an alternating elliptical axis tube. Appl. Therm. Eng. 2006, 26:2336-2344.
107. Torii K., Kwak K., Nishino K. Heat transfer enhancement accompanying pressure- loss reduction with winglet-type vortex generators for fin-tube heat exchangers. Int. J. Heat Mass Transfer 2002, 45(18):3795-3801.
108. Allison C., Dally B. Effect of a delta-winglet vortex pair on the performance of a tube-fin heat exchanger. Int. J. Heat Mass Transfer 2007, 50(25-26):5065-5072.
109. Kwak K., Torii K., Nishino K. Simultaneous heat transfer enhancement and pressure loss reduction for finned-tube bundles with the first or two transverse rows of built-in winglets. Exp. Therm. Fluid Sci. 2005, 29(5):625-632.
110. Biswas G., Mitra N.K., Fiebig M. Heat transfer enhancement in fin-tube heat-exchangers by winglet type vortex generators. Int. J. Heat Mass Transfer 1994, 37(2):283-291.
111. He J., Liu L., Jacobi A.M. Air-side heat-transfer enhancement by a new winglet-type vortex generator array in a plain-fin round-tube heat exchanger. ASME J. Heat Transfer 2010, 132(7):071801-1-071801-9.
112. Li M.J., Zhou W.J., Zhang J.F., Fan J.F., He Y.L., Tao W.Q. Heat transfer and pressure performance of a plain fin with radiantly arranged winglets around each tube in fin-and-tube heat transfer surface. Int. J. Heat Mass Transfer 2014, 70:734-744.
113. Tao W.Q., Min C.H., Liu X.L., He Y.L., Yin B.H., Jiang W. Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part I: current status of modeling research and model development. J. Power Source 2006, 160:359-373.
114. O'Hayre R.P., Cha S.W., Colella W., Prinz F.B. Fuel Cell Fundamentals 2009, 15. John Wiley & Sons, Inc., New York.
115. Kuo J.K., Chen C.K. Evaluating the enhanced performance of a novel wave-like form gas flow channel in the PEMFC using the field synergy principle. J. Power Source 2006, 162:1122-1129.
116. Kuo J.K., Yen T.S., Chen C.K. Improvement of performance of gas flow channel in PEM fuel cell. Energy Convers. Manage. 2008, 49:2776-2787.
117. Heidary H., Kermani M.J. Performance enhancement of fuel cells using bipolar plate. Int. J. Hydrogen 2013, 38:5485-5496.
118. Choghadi H.R., Kermani M.J. 15% efficiency enhancement using a novel partially interdigitated serpentine flow field for PEM fuel cells. Tenth International Conference on Sustainable Energy Technologies, Instanbul, Turkey September, 2011, 4-7.
119. Chyu M.K., Goldstein R.J. Influence of an array of wall-mounted cylinders on the mass transfer from a flat surfaces. Int. J. Heat Mass transfer 1991, 34(9):2175-2186.
120. Yuan Z.X., Wang Q.W., Tao W.Q. Experimental study of enhanced heat transfer in ducts with periodic rectangular fins along the main flow direction. Heat Transfer 1998, Proceeding of 11th IHTC, Kyongju, Korea 1998, 23-28. S.T. Ro, K.S. Lee (Eds.).
121. Yuan Z.X., Tao W.Q., Yan X.T. Experimental study on heat transfer in ducts with winglet disturbances. Heat Transfer Eng. 2003, 24(2):76-78.
122. Afanasyev V.N., Chudnovsky Y.P., Leontiev A.I., Organic P.S. Turbulent flow friction and heat transfer characteristic for spherical cavities on a flat plate. Exp. Therm. Fluid Sci. 1993, 1993(7):1-8.
123. Ligrani P.M., Mahmood G.I., Harrison J.L., Clayton C.M., Nelson D.L. Flow structure and local Nusselt number variations in a channel with dimples and protrusions on opposite walls. Int. J. Heat Mass Transfer 2001, 44:4413-4425.
124. Ligrani P.M., Harrison J.L., Mahmmod G.I., Hill M.L. Flow structure due to dimple depressions on a channel surface. Phys. Fluids 2001, 13(11):3442-3451.
125. Mahmood G.I., Ligrani P.M. Heat transfer in a dimpled channel: combined influences of aspect ratio, temperature ratio, Reynolds number, and flow structure. Int. J. Heat Mass Transfer 2002, 45:2011-2020.
126. Mahmood G.I., Hill M.L., Nelson D.L., Ligrani P.M., Moon H.K., Glezer B. Local heat transfer and flow structure on and above a dimpled surface in a channel. J. Turbomach. 2001, 123:115-123.
127. Chen J., Müller-Steinhagen H., Duffy G.G. Heat transfer enhancement in dimpled tubes. Appl. Therm. Eng. 2001, 21:535-547.
128. YaBelen'kiy M., Gotovskiy M.A., Lekakh B.M., FoKin B.S., Dolgushin K.S. Heat transfer augmentation using surfaces formed by a system of spherical cavities. Heat Transfer Res. 1993, 25(2):196-203.
129. Ligrani P.M., Oliveira M.M., Blaskovich T. Comparison of heat transfer augmentation techniques. AIAA J. 2003, 41(3):337-362.
130. Zhang J.F., Li B., Huang W.J., Lei Y.G., He Y.L., Tao W.Q. Experimental performance comparison of shell-side heat transfer for shell-and-tube heat exchangers with middle-overlapped helical baffles and segmental baffles. Chem. Eng. Sci. 2009, 64:1643-1653.