In-plane shear tests on masonry panels with plaster: correlation of structural damage and damage on artistic assets

Bulletin of Earthquake Engineering

Volumn 13, Issue 1, 2015, Pages 237-256

  Calderini, Chiara ^a   Abbati, S Degli ^a   Cotič, Patricia ^b   Kržan, Meta ^b   Bosiljkov, Vlatko ^b  

^a UNIVERSITY OF GENOA   (Italy)

^b UNIVERSITY OF LJUBLJANA   (Slovenia)

Author keywords

Artistic assets; Diagonal test; Multi leaf stone masonry; NDT; Plaster; Shear test

Indexed keywords

MASONRY CONSTRUCTION; MASONRY MATERIALS; PLASTER; RETAINING WALLS; WALLS (STRUCTURAL PARTITIONS);

ARTISTIC ASSETS; DIAGONAL TEST; DIFFERENT BOUNDARY CONDITION; NON DESTRUCTIVE TESTING; SHEAR TESTS; STONE MASONRY; STONE MASONRY WALLS; UNIVERSITY OF GENOA;

NONDESTRUCTIVE EXAMINATION;

EID: 84918589269     PISSN: 1570761X     EISSN: 15731456     Source Type: Journal    
DOI: 10.1007/s10518-014-9632-y     Document Type: Article

References (21)

1. Agbabian MS, Masri FS, Nigbor RL (1990) Evaluation of seismic mitigation measures for art objects. Department of Civil Engineering, University of Southern California, Los Angeles; The Getty Conservation Institute, Marina del Rey, CA
2. Arndt R (2008) Square pulse thermography in frequency domain. In: Thermosense XXX, Proceedings of SPIE Vavilov VP, Burleigh DD (eds), Society of Photo Optical, Orlando (FL), 2008, 69390X–69390X-12
3. ASTME 519, (2002) Standard test method for diagonal tension (shear) in masonry assemblages. Annual Book of ASTM Standards, American Society for Testing and Materials
4. Augusti G, Airoldi L, Ciampoli M (1992). Mitigation of seismic risk for Museum contents: an introductory investigation. In: Proceedings 10th WCEE, world conference on earthquake engineering, Madrid (Spain), Balkema AA, Rotterdam, 5995
5. Bokan-Bosiljkov V, Valek J (2005) A comparative study of mechanical and physical properties of mortars prepared using lime putties, sand and metakaolin from different sources. In: Proceedings repair mortars for historic masonry, international workshop, Delft (Netherland), 25–28 Jan, p 17
6. Cotič P, Jagličić Z, Bosiljkov V (2013a). Validation of non-destructive characterization of the structure and seismic damage propagation on multiply-leaf stone masonry walls with artistic assets, J Cult Herit. doi:10.1016/j.culher.2013.11.004
7. Cotič P, Niederleithinger E, Bosiljkov V, Jagličić Z (2013b) NDT data fusion for the enhancement of defect visualization in concrete. Key Eng Mater 569–570:175–182
8. Cotterell B, Chen Z (2000) Buckling and cracking of thin films on compliant substrate under compression. Int J Fract 104:169–179
9. Hutchinson JW, Suo Z (1992) Mixed-mode cracking in layered materials. Adv Appl Mech 29:64–187
10. Ignatiev N, Chatterji S (1992) On the mutual compatibility of mortar and concrete in composite members. Cem Concr Comp 14:179–183
11. Kovler K, Frostig Y (1998) On the problem of cracking in plaster layers. Constr Build Mater 12:251–258
12. Kržan M, Gostič S, Cattari S, Bosiljkov V (2014) Acquiring the knowledge of historical masonry for structural performance from in-situ and laboratory tests: masonry classification, testing procedures and reference parameters. Bull Earth Eng (this issue)
13. Lagomarsino S, Abbas N, Calderini C, Cattari S, Rossi M, Marghella G, Mattolin F, Piovanello V (2011) Classification of cultural heritage assets and seismic damage variables for the identification of performance levels. WIT Trans Built Environ 118:697–708. doi:10.2495/STR110581
14. Li S, Wang J, Thouless MD (2004) The effects of shear on delamination in layered materials. J Mech Phys Solids 52:193–214
15. Lourenço PB, van Hees R, Fernandes F, Lubelli B (2014) Characterization and damage of brick masonry. In: Costa A et al (eds) structural rehabilitation of old buildings, building pathology and rehabilitation, 2nd edn. Springer, Berlin
16. Lunghi F, Pavese A, Peloso S, Lanese I, Silvestri D (2012) Computer vision system for monitoring in dynamic structural testing. In: Fardis MN, Rakicevic ZT (eds) Role of seismic testing facilities in performance-based earthquake engineering: SERIES Workshop, Geotechnical, Geological, and Earthquake Engineering, 22
17. RILEM TC 76-LUM (1991–1994). Diagonal tensile strength tests of small wall specimens
18. Suo Z, Hutchinson JW (1990) Interface crack between two elastic layers. Int J Fract 43:1–18
19. UNI EN-459-1 (2002) Calci da costruzione - Definizioni, specifiche e criteri di conformità (In Italian)
20. UNI EN 1015–11 (2007) Standard, methods of test for mortar for masonry—determination of flexural and compressive strength of hardened mortar
21. Yu H, Hutchinson JW (2002) Influence of substrate compliance on buckling delamination of thin films. Int J Fract 113:39–55