Optimizing niobium dealloying with metallic melt to fabricate porous structure for electrolytic capacitors

Acta Materialia

Volumn 84, Issue , 2015, Pages 497-505

  Kim, Joung Wook ^a   Tsuda, Masashi ^a   Wada, Takeshi ^b   Yubuta, Kunio ^b   Kim, Sung Gyoo ^c   Kato, Hidemi ^b  

^a TOHOKU UNIVERSITY   (Japan)

^b TOHOKU UNIVERSITY   (Japan)

^c Pukyong National University   (South Korea)

Author keywords

Dealloying; Nanostructure; Nb electrolytic capacitor; Porous material

Indexed keywords

ACTIVATION ENERGY; DIFFUSION; NANOSTRUCTURES; NICKEL; POROUS MATERIALS; REACTION KINETICS;

BODY-CENTERED CUBIC; DE-ALLOYING; KINETICS ANALYSIS; POROUS STRUCTURES; RATE-CONTROLLING PROCESS; SPECIFIC CAPACITANCE; TRANSITION BEHAVIOR; TRANSITION LAYERS;

ELECTROLYTIC CAPACITORS;

EID: 84916899459     PISSN: 13596454     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.actamat.2014.11.002     Document Type: Article

References (35)

1. A. Nishino, Capacitors: operating principles, current market and technical trends, J. Power Sources 60 (1996) 137-147.
2. D.A. Mclean, F.S. Power, Tantalum solid electrolytic capacitors, Proc. IRE 44 (1956) 872-878.
3. K. Watanabe, M. Sakairi, H. Takahashi, S. Hirai, S. Yamaguchi, Formation of Al-Zr composite oxide films on aluminum by sol-gel coating and anodizing, J. Electroanal. Chem. 473 (1999) 250-255.
4. N. Schwartz, M. Gresh, S. Karlik, Niobium solid electrolytic capacitors, J. Electrochem. Soc. 108 (1961) 750-758.
5. H. Störmer, A. Weber, V. Fischer, E. Ivers-Tiffée, D. Gerthsen, Anodically formed oxide films on niobium: microstructural and electrical properties, J. Eur. Ceram. Soc. 29 (2009) 1743-1753.
6. H. Haas, Magnesium vapour reduced tantalum powders with very high capacitances, in: Proceedings of the 18th Passive Components Conference CARTS Europe, Nice, France, 2004, pp. 5-8.
7. X.Y. Lang, H.T. Yuan, Y. Iwasa, M.W. Chen, Three-dimensional nanoporous gold for electrochemical supercapacitors, Scr. Mater. 64 (2011) 923-926.
8. A.J. Forty, The dissolution of gold alloys, Nature 282 (1979) 597-598.
9. 0.25, J. Mater. Res. 18 (2003) 216-221.
10. M. Hakamada, M. Mabuchi, Fabrication of nanoporous palladium by dealloying and its thermal coarsening, J. Alloy Compd. 479 (2009) 326-329.
11. U.S. Min, J.C.M. Li, Microstructure and dealloying kinetics of a Cu-Mn alloy, J. Mater. Res. 9 (1994) 2878-2883.
12. M. Hakamada, M. Mabuchi, Preparation of nanoporous Ni and Ni-Cu by dealloying of rolled Ni-Mn and Ni-Cu-Mn alloys, J. Alloys Compd. 485 (2009) 583-587.
13. T. Wada, K. Yubuta, A. Inoue, H. Kato, Dealloying by metallic melt, Mater. Lett. 65 (2011) 1076-1078.
14. T. Wada, A.D. Setyawan, K. Yubuta, H. Kato, Nano- to submicro-porous β-Ti alloy prepared from dealloying in a metallic melt, Scr. Mater. 65 (2011) 532-535.
15. T. Wada, H. Kato, Three-dimensional open-cell macroporous iron, chromium and ferritic stainless steel, Scr. Mater. 68 (2013) 723-726.
16. J.W. Kim, T. Wada, S.G. Kim, H. Kato, Sub-micron porous niobium solid electrolytic capacitor prepared by dealloying in a metallic melt, Mater. Lett. 116 (2014) 223-226.
17. H. Okamoto, Desk Handbook, Phase Diagrams for Binary Alloys, ASM International, Materials Park, OH, 2000.
18. M. Tsuda, T. Wada, H. Kato, Kinetics of formation and coarsening of nanoporous α-titanium dealloyed with Mg melt, J. Appl. Phys. 114 (2013) 113503.
19. Y. Tanaka, M. Kajihara, Y. Watanabe, Growth behavior of compound layers during reactive diffusion between solid Cu and liquid Al, Mater. Sci. Eng. A 445-446 (2007) 355-363.
20. 3Sn layer during reactive diffusion between Cu-8.3Sn alloy and Nb, Mater. Sci. Eng. A 404 (2005) 33-41.
21. M.O.K. Meguro, M. Kajihara, Growth behavior of compounds due to solid-state reactive diffusion between Cu and Al, J. Mater. Sci. 47 (2012) 4955-4964.
22. T. Ishida, The interaction of molten copper with solid iron, J. Mater. Sci. 21 (1986) 1171-1179.
23. K. Nonaka, T. Sakazawa, H. Nakajima, Reaction diffusion in Mg-Cu system, Mater. Trans. JIM 36 (1995) 1463-1466.
24. Y. Du, Y.A. Chang, B. Huang, W. Gong, Z. Jin, H. Xu, et al., Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation, Mater. Sci. Eng. A 363 (2003) 140-151.
25. J. Erlebacher, M.J. Aziz, A. Karma, N. Dimitrov, K. Sieradzki, Evolution of nanoporosity in dealloying, Nature 410 (2001) 450-453.
26. J.E. Burke, Some factors affecting the rate of grain growth in metals, Trans. Metall. Soc. AIME 180 (1949) 73-91.
27. J.M. Dona, J. Gonzalez-Velasco, Mechanism of surface diffusion of gold adatoms in contact with an electrolytic solution, J. Phys. Chem. 97 (1993) 4714-4719.
28. C. Herring, Effect of change of scale on sintering phenomena, J. Appl. Phys. 21 (1950) 301-303.
29. L.H. Qian, M.W. Chen, Ultrafine nanoporous gold by low-temperature dealloying and kinetics of nanopore formation, Appl. Phys. Lett. 91 (2007) 083105.
30. X. Luo, R. Li, L. Huang, T. Zhang, Nucleation and growth of nanoporous copper ligaments during electrochemical dealloying of Mg-based metallic glasses, Corros. Sci. 67 (2013) 100-108.
31. J.A. Clum, Consideration of the bulk impurity effect in surface self-diffusion measurement, Scr. Metall. 4 (1970) 463-468.
32. M.M. Lohrengel, Thin anodic oxide layers on aluminium and other valve metals: high field regime, Mater. Sci. Eng. R11 (1993) 243-294.
33. 2N two phase alloys, Thin Solid Films 519 (2010) 719-724.
34. S.M. Jung, I.S. Bae, J.S. Yoon, S. Goto, B.I. Kim, Evaluation of electric properties for niobium capacitors, Mater. Trans. 48 (2007) 3197-3200.
35. Y. Matsuda, T. Osaka, Y. Sato, Capacitor Handbook, Maruzen, Tokyo, 2009, pp. 418-423.