메뉴 건너뛰기




Volumn 29, Issue 17, 2014, Pages 1941-1950

Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies

Author keywords

[No Author keywords available]

Indexed keywords

COMPRESSIVE STRENGTH; ELASTIC MODULI; MELTING; MICROCRACKS; POROSITY; POWDER METALLURGY;

EID: 84911979203     PISSN: 08842914     EISSN: 20445326     Source Type: Journal    
DOI: 10.1557/jmr.2014.122     Document Type: Article
Times cited : (127)

References (41)
  • 1
    • 84875686716 scopus 로고    scopus 로고
    • Ti based biomaterials, the ultimate choice for orthopaedic implants - Areview
    • M. Geetha, A.K. Singh, R. Asokamani, and A.K. Gogia: Ti based biomaterials, the ultimate choice for orthopaedic implants - Areview. Prog. Mater. Sci. 54(3), 397 (2009).
    • (2009) Prog. Mater. Sci , vol.54 , Issue.3 , pp. 397
    • Geetha, M.1    Singh, A.K.2    Asokamani, R.3    Gogia, A.K.4
  • 2
    • 79956160616 scopus 로고    scopus 로고
    • Dry sliding wear behavior of extruded titanium matrix composite reinforced by in situ TiB whisker and TiC particle
    • Y. Qin, L. Geng, and D. Ni: Dry sliding wear behavior of extruded titanium matrix composite reinforced by in situ TiB whisker and TiC particle. J. Mater. Sci. 46(14), 4980 (2011).
    • (2011) J. Mater. Sci , vol.46 , Issue.14 , pp. 4980
    • Qin, Y.1    Geng, L.2    Ni, D.3
  • 3
    • 10144255150 scopus 로고    scopus 로고
    • Microstructure and wear performance of gradient Ti / TiN metal matrix composite coating synthesized using a gas nitriding technology
    • Z.D. Cui, S.L. Zhu, H.C. Man, and X.J. Yang: Microstructure and wear performance of gradient Ti / TiN metal matrix composite coating synthesized using a gas nitriding technology. Surf. Coat. Technol. 190(2), 309 (2005).
    • (2005) Surf. Coat. Technol , vol.190 , Issue.2 , pp. 309
    • Cui, Z.D.1    Zhu, S.L.2    Man, H.C.3    Yang, X.J.4
  • 4
    • 0035975202 scopus 로고    scopus 로고
    • Microstructural characterization of TiC in in situ synthesized titanium matrix composites prepared by common casting technique
    • W. Lu, D. Zhang, X. Zhang, R. Wu, T. Sakata, and H. Mori: Microstructural characterization of TiC in in situ synthesized titanium matrix composites prepared by common casting technique. J. Alloys Compd. 327(1), 248 (2001).
    • (2001) J. Alloys Compd , vol.327 , Issue.1 , pp. 248
    • Lu, W.1    Zhang, D.2    Zhang, X.3    Wu, R.4    Sakata, T.5    Mori, H.6
  • 6
    • 0036486407 scopus 로고    scopus 로고
    • Densification and compressive strength of in-situ processed Ti/TiB composites by powder metallurgy
    • H.W. Jeong, S.J. Kim, Y.T. Hyun, and Y.T. Lee: Densification and compressive strength of in-situ processed Ti/TiB composites by powder metallurgy. Met. Mater. Int. 8(1), 25 (2002).
    • (2002) Met. Mater. Int , vol.8 , Issue.1 , pp. 25
    • Jeong, H.W.1    Kim, S.J.2    Hyun, Y.T.3    Lee, Y.T.4
  • 7
    • 3042626640 scopus 로고    scopus 로고
    • TiBw-reinforced Ti composites: Processing, properties, application prospects, and research needs
    • K.S.R. Chandran, K.B. Panda, and S.S. Sahay: TiBw-reinforced Ti composites: Processing, properties, application prospects, and research needs. JOM 56(5), 42 (2004).
    • (2004) JOM , vol.56 , Issue.5 , pp. 42
    • Chandran, K.S.R.1    Panda, K.B.2    Sahay, S.S.3
  • 8
    • 0037437602 scopus 로고    scopus 로고
    • Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite
    • S. Gorsse, Y.L. Petitcorps, S. Matar, and F. Rebillat: Investigation of the Young's modulus of TiB needles in situ produced in titanium matrix composite. Mater. Sci. Eng., A 340(1), 80 (2003).
    • (2003) Mater. Sci. Eng., A , vol.340 , Issue.1 , pp. 80
    • Gorsse, S.1    Petitcorps, Y.L.2    Matar, S.3    Rebillat, F.4
  • 9
    • 0034344309 scopus 로고    scopus 로고
    • Titanium particulate metal matrix composites-Reinforcement, production methods, and mechanical properties
    • T.M.T. Gofrey, P.S. Goodwin, and C.M. Ward-Close: Titanium particulate metal matrix composites-Reinforcement, production methods, and mechanical properties. Adv. Eng. Mater. 2(3), 85 (2000).
    • (2000) Adv. Eng. Mater , vol.2 , Issue.3 , pp. 85
    • Gofrey, T.M.T.1    Goodwin, P.S.2    Ward-Close, C.M.3
  • 10
    • 84869085749 scopus 로고    scopus 로고
    • Effect of Ti content and sintering temperature on the microstructures and mechanical properties of TiB reinforced titanium composites synthesized by SPS process
    • S. Wei, Z.H. Zhang, F.C. Wang, X.B. Shen, H.N. Cai, S.K. Lee, and L. Wang: Effect of Ti content and sintering temperature on the microstructures and mechanical properties of TiB reinforced titanium composites synthesized by SPS process. Mater. Sci. Eng., A 560, 249 (2013).
    • (2013) Mater. Sci. Eng., A , vol.560 , pp. 249
    • Wei, S.1    Zhang, Z.H.2    Wang, F.C.3    Shen, X.B.4    Cai, H.N.5    Lee, S.K.6    Wang, L.7
  • 11
    • 33947161157 scopus 로고    scopus 로고
    • Processing and properties of titanium-titanium boride (TiBw) matrix composites-A review
    • K. Morsi and V.V. Patel: Processing and properties of titanium-titanium boride (TiBw) matrix composites-A review. J. Mater. Sci. 42(6), 2037 (2007).
    • (2007) J. Mater. Sci , vol.42 , Issue.6 , pp. 2037
    • Morsi, K.1    Patel, V.V.2
  • 12
    • 0034249959 scopus 로고    scopus 로고
    • Microstructural and mechanical characteristics of in situ metal matrix composites
    • S.C. Tjong and Z.Y. Ma: Microstructural and mechanical characteristics of in situ metal matrix composites. Mater. Sci. Eng., R 29(3), 49 (2000).
    • (2000) Mater. Sci. Eng., R , vol.29 , Issue.3 , pp. 49
    • Tjong, S.C.1    Ma, Z.Y.2
  • 13
    • 84866646938 scopus 로고    scopus 로고
    • Mechanical behaviour of pressed and sintered titanium alloys obtained from master alloy addition powders
    • L. Bolzoni, P.G. Esteban, E.M. Ruiz-Navas, and E. Gordo: Mechanical behaviour of pressed and sintered titanium alloys obtained from master alloy addition powders. J. Mech. Behav. Biomed. Mater. 15, 33 (2012).
    • (2012) J. Mech. Behav. Biomed. Mater , vol.15 , pp. 33
    • Bolzoni, L.1    Esteban, P.G.2    Ruiz-Navas, E.M.3    Gordo, E.4
  • 14
    • 0034990033 scopus 로고    scopus 로고
    • Effect of silicon addition on microstructure and mechanical properties of cast titanium alloys
    • J. Zhu, A. Kamiya, T. Yamada, A. Watazu, W. Shi, and K. Naganuma: Effect of silicon addition on microstructure and mechanical properties of cast titanium alloys. Mater. Trans. 42(2), 336 (2001).
    • (2001) Mater. Trans , vol.42 , Issue.2 , pp. 336
    • Zhu, J.1    Kamiya, A.2    Yamada, T.3    Watazu, A.4    Shi, W.5    Naganuma, K.6
  • 15
    • 84875543515 scopus 로고    scopus 로고
    • Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
    • G. Campoli, M.S. Borleffs, S.A. Yavari, R. Wauthle, H. Weinans, and A.A. Zadpoor: Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing. Mater. Des. 49, 957 (2013).
    • (2013) Mater. des , vol.49 , pp. 957
    • Campoli, G.1    Borleffs, M.S.2    Yavari, S.A.3    Wauthle, R.4    Weinans, H.5    Zadpoor, A.A.6
  • 16
    • 0346639199 scopus 로고    scopus 로고
    • Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives
    • G.N. Levy, R. Schindel, and J.P. Kruth: Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives. CIRP Ann.-Manuf. Technol. 52(2), 589 (2003).
    • (2003) CIRP Ann.-Manuf. Technol , vol.52 , Issue.2 , pp. 589
    • Levy, G.N.1    Schindel, R.2    Kruth, J.P.3
  • 17
    • 84888314336 scopus 로고    scopus 로고
    • Manufacture by selective laser melting and mechanical behavior of commercially pure titanium
    • H. Attar, M. Calin, L.C. Zhang, S. Scudino, and J. Eckert: Manufacture by selective laser melting and mechanical behavior of commercially pure titanium. Mater. Sci. Eng., A 593, 170 (2014).
    • (2014) Mater. Sci. Eng., A , vol.593 , pp. 170
    • Attar, H.1    Calin, M.2    Zhang, L.C.3    Scudino, S.4    Eckert, J.5
  • 18
    • 79955470631 scopus 로고    scopus 로고
    • Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
    • L.C. Zhang, D. Klemm, J. Eckert, Y.L. Hao, and T.B. Sercombe: Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy. Scr. Mater. 65(1), 21 (2011) .
    • (2011) Scr. Mater , vol.65 , Issue.1 , pp. 21
    • Zhang, L.C.1    Klemm, D.2    Eckert, J.3    Hao, Y.L.4    Sercombe, T.B.5
  • 19
    • 84867966706 scopus 로고    scopus 로고
    • Selective laser melting of low-modulus biomedical Ti-24Nb-4Zr-8Sn Alloy: Effect of laser point distance
    • L.C. Zhang and T.B. Sercombe: Selective laser melting of low-modulus biomedical Ti-24Nb-4Zr-8Sn Alloy: Effect of laser point distance. Key Eng. Mater. 520, 226 (2012).
    • (2012) Key Eng. Mater , vol.520 , pp. 226
    • Zhang, L.C.1    Sercombe, T.B.2
  • 20
    • 84901892566 scopus 로고    scopus 로고
    • Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties
    • H. Attar, M. Bonisch, M. Calin, L.C. Zhang, S. Scudino, and J. Eckert: Selective laser melting of in situ titanium-titanium boride composites: Processing, microstructure and mechanical properties. Acta Mater. 76, 13 (2014).
    • (2014) Acta Mater , vol.76 , pp. 13
    • Attar, H.1    Bonisch, M.2    Calin, M.3    Zhang, L.C.4    Scudino, S.5    Eckert, J.6
  • 21
    • 80052024154 scopus 로고    scopus 로고
    • Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by selective laser melting (SLM): Densification, growth mechanism and wear behavior
    • D. Gu, Y.C. Hagedorn, W. Meiners, K. Wissenbach, and R. Poprawe: Nanocrystalline TiC reinforced Ti matrix bulk-form nanocomposites by selective laser melting (SLM): Densification, growth mechanism and wear behavior. Compos. Sci. Technol. 71, 1612 (2011).
    • (2011) Compos. Sci. Technol , vol.71 , pp. 1612
    • Gu, D.1    Hagedorn, Y.C.2    Meiners, W.3    Wissenbach, K.4    Poprawe, R.5
  • 23
    • 84873713967 scopus 로고    scopus 로고
    • Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
    • L. Thijs, K. Kempen, K.J.P. and J. Van Humbeeck: Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder. Acta Mater. 61,1809 (2013).
    • (2013) Acta Mater , vol.61 , pp. 1809
    • Thijs, L.1    Kempen, K.2    Van Humbeeck, K.J.P.J.3
  • 24
    • 84893121070 scopus 로고    scopus 로고
    • The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy
    • X.J. Wang, L.C. Zhang, M.H. Fang, and T.B. Sercombe: The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy. Mater. Sci. Eng., A 597, 370 (2014).
    • (2014) Mater. Sci. Eng., A , vol.597 , pp. 370
    • Wang, X.J.1    Zhang, L.C.2    Fang, M.H.3    Sercombe, T.B.4
  • 25
    • 13844297092 scopus 로고    scopus 로고
    • Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites
    • H. Feng, D. Jia, and Y. Zhou: Spark plasma sintering reaction synthesized TiB reinforced titanium matrix composites. Composites Part A 36(5), 558 (2005).
    • (2005) Composites Part A , vol.36 , Issue.5 , pp. 558
    • Feng, H.1    Jia, D.2    Zhou, Y.3
  • 26
    • 4344624906 scopus 로고    scopus 로고
    • Microstructure and properties of TiB/Ti-6Al-4V coatings produced with laser treatments
    • D. Galvan, V. Ocelik, Y. Pei, B.J. Kooi, J.T.M. De Hosson, and E. Ramous: Microstructure and properties of TiB/Ti-6Al-4V coatings produced with laser treatments. J. Mater. Eng. Perform. 13(4), 406 (2004).
    • (2004) J. Mater. Eng. Perform , vol.13 , Issue.4 , pp. 406
    • Galvan, D.1    Ocelik, V.2    Pei, Y.3    Kooi, B.J.4    De Hosson, J.T.M.5    Ramous, E.6
  • 27
    • 46749127071 scopus 로고    scopus 로고
    • Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
    • P. Heinl, L. Miiller, C. Korner, R.F. Singer, and F.A. Miiller: Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting. Acta Biomater. 4(5), 1536 (2008).
    • (2008) Acta Biomater , vol.4 , Issue.5 , pp. 1536
    • Heinl, P.1    Miiller, L.2    Korner, C.3    Singer, R.F.4    Miiller, F.A.5
  • 28
    • 33750324273 scopus 로고    scopus 로고
    • Cell structure control of porous titanium composite synthesized by combustion reaction
    • M. Kobashi, K. Kuze, and N. Kanetake: Cell structure control of porous titanium composite synthesized by combustion reaction. Adv. Eng. Mater. 8(9), 836 (2006).
    • (2006) Adv. Eng. Mater , vol.8 , Issue.9 , pp. 836
    • Kobashi, M.1    Kuze, K.2    Kanetake, N.3
  • 29
    • 70350020733 scopus 로고    scopus 로고
    • Fabrication of porous titanium implants with biomechanical compatibility
    • Y.J. Chen, B. Feng, Y.P. Zhu, J. Weng, J.X. Wang, and X. Lu: Fabrication of porous titanium implants with biomechanical compatibility. Mater. Lett. 63(30), 2659 (2009).
    • (2009) Mater. Lett , vol.63 , Issue.30 , pp. 2659
    • Chen, Y.J.1    Feng, B.2    Zhu, Y.P.3    Weng, J.4    Wang, J.X.5    Lu, X.6
  • 30
    • 84860313211 scopus 로고    scopus 로고
    • Densification behavior, micro-structure evolution, and wear performance of selective laser melting processed commercially pure titanium
    • D. Gu, Y.-C. Hagedorn, W. Meiners, G. Meng, R.J.S. Batista, K. Wissenbach, and R. Poprawe: Densification behavior, micro-structure evolution, and wear performance of selective laser melting processed commercially pure titanium. Acta Mater. 60(9), 3849 (2012) .
    • (2012) Acta Mater , vol.60 , Issue.9 , pp. 3849
    • Gu, D.1    Hagedorn, Y.-C.2    Meiners, W.3    Meng, G.4    Batista, R.J.S.5    Wissenbach, K.6    Poprawe, R.7
  • 31
    • 77954819150 scopus 로고    scopus 로고
    • Deformation-induced grain refinement in body-centered cubic Co-Fe alloys upon room temperature compression
    • L.C. Zhang, M. Calin, F. Paturaud, and J. Eckert: Deformation-induced grain refinement in body-centered cubic Co-Fe alloys upon room temperature compression. Mater. Sci. Eng., A 527, 5796 (2010).
    • (2010) Mater. Sci. Eng., A , vol.527 , pp. 5796
    • Zhang, L.C.1    Calin, M.2    Paturaud, F.3    Eckert, J.4
  • 32
    • 0033221461 scopus 로고    scopus 로고
    • Evolution of microstructure and phases in in situ processed Ti-TiB composites containing high volume fractions of TiB whiskers
    • S.S. Sahay, K.S. Ravichandran, R. Atri, B. Chen, and J. Rubin: Evolution of microstructure and phases in in situ processed Ti-TiB composites containing high volume fractions of TiB whiskers. J. Mater. Res. 14(11), 4214 (1999).
    • (1999) J. Mater. Res , vol.14 , Issue.11 , pp. 4214
    • Sahay, S.S.1    Ravichandran, K.S.2    Atri, R.3    Chen, B.4    Rubin, J.5
  • 33
    • 84877908447 scopus 로고    scopus 로고
    • TiB whiskers reinforced high temperature titanium Ti60 alloy composites with novel network microstructure
    • L.J. Huang, F.Y. Yang, H.T. Hu, X.D. Rong, L. Geng, and L.Z. Wu: TiB whiskers reinforced high temperature titanium Ti60 alloy composites with novel network microstructure. Mater. Des. 51, 421 (2013).
    • (2013) Mater. des , vol.51 , pp. 421
    • Huang, L.J.1    Yang, F.Y.2    Hu, H.T.3    Rong, X.D.4    Geng, L.5    Wu, L.Z.6
  • 34
    • 0036866376 scopus 로고    scopus 로고
    • TiB whisker coating on titanium surfaces by solid-state diffusion: Syn
    • thesis, microstructure, and mechanical properties
    • S. Aich and K.S.R. Chandran: TiB whisker coating on titanium surfaces by solid-state diffusion: Synthesis, microstructure, and mechanical properties. Metall. Mater. Trans. A. 33(11), 3489 (2002).
    • (2002) Metall. Mater. Trans. A , vol.33 , Issue.11 , pp. 3489
    • Aich, S.1    Chandran, K.S.R.2
  • 35
    • 43849108865 scopus 로고    scopus 로고
    • Growth mechanism of in situ synthesized TiBw in titanium matrix composites prepared by common casting technique
    • W.J. Lu, L. Xiao, K. Geng, J.N. Qin, and D. Zhang: Growth mechanism of in situ synthesized TiBw in titanium matrix composites prepared by common casting technique. Mater. Charact. 59(7), 912 (2008).
    • (2008) Mater. Charact , vol.59 , Issue.7 , pp. 912
    • Lu, W.J.1    Xiao, L.2    Geng, K.3    Qin, J.N.4    Zhang, D.5
  • 36
    • 0141742602 scopus 로고    scopus 로고
    • Titanium-titanium boride (Ti-TiB) functionally graded materials through reaction sintering: Syn
    • thesis, microstructure, and properties
    • K.B. Panda and K.S.R. Chandran: Titanium-titanium boride (Ti-TiB) functionally graded materials through reaction sintering: Synthesis, microstructure, and properties. Metall. Mater. Trans. A 34(9), 1993 (2003).
    • (2003) Metall. Mater. Trans. A , vol.34 , Issue.9 , pp. 1993
    • Panda, K.B.1    Chandran, K.S.R.2
  • 37
    • 0037707365 scopus 로고    scopus 로고
    • Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: The nature of TiB formation and composite properties
    • K.B. Panda and K.S.R. Chandran: Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: The nature of TiB formation and composite properties. Metall. Mater. Trans. A 34(6), 1371 (2003).
    • (2003) Metall. Mater. Trans. A , vol.34 , Issue.6 , pp. 1371
    • Panda, K.B.1    Chandran, K.S.R.2
  • 39
    • 0042410609 scopus 로고    scopus 로고
    • In situ formed Ti-Cu-Ni-Sn-Ta nanostructure-dendrite composite with large plasticity
    • G. He, W. Loser, and J. Eckert: In situ formed Ti-Cu-Ni-Sn-Ta nanostructure-dendrite composite with large plasticity. Acta Mater. 51(17), 5223 (2003).
    • (2003) Acta Mater , vol.51 , Issue.17 , pp. 5223
    • He, G.1    Loser, W.2    Eckert, J.3
  • 40
    • 46949099962 scopus 로고    scopus 로고
    • Biomedical applications of titanium and its alloys
    • C.N. Elias, J.H.C. Lima, R. Valiev, and M.A. Meyers: Biomedical applications of titanium and its alloys. JOM 60(3), 46 (2008).
    • (2008) JOM , vol.60 , Issue.3 , pp. 46
    • Elias, C.N.1    Lima, J.H.C.2    Valiev, R.3    Meyers, M.A.4
  • 41
    • 80655132246 scopus 로고    scopus 로고
    • Compressive deformation behaviors of coarse- and ultrafine-grained pure titanium at different temperatures: A comparative study
    • F.W. Long, Q.W. Jiang, L. Xiao, and X.W. Li: Compressive deformation behaviors of coarse- and ultrafine-grained pure titanium at different temperatures: A comparative study. Mater. Trans. 52(8), 1617 (2011).
    • (2011) Mater. Trans , vol.52 , Issue.8 , pp. 1617
    • Long, F.W.1    Jiang, Q.W.2    Xiao, L.3    Li, X.W.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.