Effect of chemical modification with maleic, propionic, and succinic anhydrides on some properties of wood flour filled HDPE composites

BioResources

Volumn 9, Issue 4, 2014, Pages 6490-6503

  Cavdar, Ayfer D ^a   Mengeloglu, Fatih ^b   Karakus, Kadir ^b   Tomak, Eylem D ^c  

^a KARADENIZ TECHNICAL UNIVERSITY   (Turkey)

^b KAHRAMANMARAS SUTCU IMAM UNIVERSITY   (Turkey)

^c BURSA TECHNICAL UNIVERSITY   (Turkey)

Author keywords

Anhydrides; Composite; Mechanical properties; Modified wood flour; Thermal properties

Indexed keywords

COMPOSITE MATERIALS; EXTRUSION MOLDING; FILLED POLYMERS; HIGH DENSITY POLYETHYLENES; IMPACT STRENGTH; IMPACT TESTING; INJECTION MOLDING; MECHANICAL PROPERTIES; POLYETHYLENES; REINFORCED PLASTICS; TENSILE STRENGTH; TENSILE TESTING; THERMODYNAMIC PROPERTIES; THERMOPLASTICS; WOOD; WOOD PRODUCTS; ALIPHATIC COMPOUNDS; OXYGEN;

ANHYDRIDES; CHEMICAL CONCENTRATIONS; CHEMICALLY MODIFIED; HIGH DENSITY POLYETHYLENE COMPOSITES; LIMITING OXYGEN INDEX; MODIFIED WOOD; SINGLE SCREW EXTRUSION; THERMOPLASTIC COMPOSITE; EFFECT OF CHEMICALS; SUCCINIC ANHYDRIDE;

CHEMICAL MODIFICATION;

ANHYDRIDES; CHEMICAL TREATMENT; COMPOSITES; MECHANICAL PROPERTIES; THERMAL PROPERTIES; THERMOPLASTICS; WOOD FLOUR; ALIPHATIC COMPOUNDS; IMPACT STRENGTH; INJECTION MOLDING; OXYGEN; TENSILE STRENGTH; WOOD PRODUCTS;

EID: 84911391678     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.9.4.6490-6503     Document Type: Article

References (41)

1. ASTM D256 (2007). "Standard test method for determining the izod pendulum impact resistance of plastics". ASTM International, West Conshohocken, PA.
2. ASTM D638. (2007). "Standard test method for tensile properties of plastics". ASTM International, West Conshohocken, PA.
3. ASTM D790 (2007). "Standard test method for flexural properties of unreinforced and reinforced plastics and electrical insulating materials". ASTM International, West Conshohocken, PA.
4. ASTM D2863-10 (2000). "Standard test method for measuring the minimum oxygen concentration to support candle-like combustion of plastics (oxygen index)". ASTM International, West Conshohocken, PA.
5. Arbelaiz, A., Fernández, B., Ramos, J. A., and Mondragon, I. (2006). "Thermal and crystallization studies of short flax fibre reinforced polypropylene matrix composites: Effect of treatments". Thermochim. Acta 440(2), 111-121. DOI: 10.1016/j.tca.2005.10.016
6. Bismarck, A., Mishra, S., and Lampke, T. (2005). "Plant fibres as reinforcement for green composites". in: Natural Fibres Biopolymers and Biocomposites, A. K. Mohanty, M. Misra, and L. T. Drzal (eds.), CRC Press, Boca Raton, p. 37.
7. Bogoeva-Gaceva, G., Avella, M., Malinconico, M., Buzarovska, A., Grozdano, A., Gentile, G., and Errico, M. E. (2007). "Natural fibre eco-composites". Polymer Compos. 28(1), 98-107. DOI: 10.1002/pc.20270
8. Burgstaller, C., and Stadlbauer, W. (2012). "Influence of chemical modification on the water uptake properties of wood plastic composites". J. Biobased Mater. Bioenergy 6(1), 380-387.
9. Cantero, G., Arbelaiz, A., Llano-Ponte, R., and Mondragon, I. (2003). "Effects of fibre treatment on wettability and mechanical behavior of flax/polypropylene composites". Compos. Sci. Technol. 63(1), 1247-1254.
10. Carus, M., Eder, A., Dammer, L., Korte, H., Scholz, L., Essel, R., and Breitmayer, E. (2012). "Wood-plastic composites (WPC) and natural fibre composites (NFC): European and global markets 2012 and future trends". Nova-Institut GmbH. (http://www.nova-institut.de/download/market_study_wpc_nfc_short_version).
11. Clemons, C. (2002). "Wood-plastic composites in the United States: The interfacing of two industries". Forest Prod. J. 52(6), 10-18.
12. nd Ed., Taylor & Francis, London.
13. Dizman, E. (2005). "The effects of chemical modification on the physical, mechanical and biological properties of alder and spruce particleboards". M.Sc. thesis, Institute of Natural Science, Karadeniz Technical University, Trabzon.
14. Donmez Cavdar, A., Kalaycioglu, H., and Mengeloglu, F. (2011). "Tea mill waste fibers filled thermoplastic composites: The effects of plastic type and fiber loading". J. Reinf. Plast. Compos. 30(10), 833-844.
15. Farahani, M. R. M., and Taghizadeh, F. (2010). "Roughness of esterified eastern cottonwood". BioResources 5(4), 2232-2238.
16. Felix, J. M., and Gatenholm, P. (1993). "Formation of entanglements at brushlike interfaces in cellulose-polymer composites". J. Appl. Polym. Sci. 50(4), 699-708. DOI: 10.1002/app.1993.070500416
17. Hill, C. A. S. (2006). Wood Modification-Chemical, Thermal and Other Processes, John Wiley & Sons, England.
18. Ibach, R. E., and Clemons, C. M. (2006). "Effect of acetylated wood flour or coupling agent on moisture, UV, and biological resistance of extruded woodfiber-plastic composites". in: Proceedings of Wood Protection 2006, Forest Products Society, March 21-23, New Orleans, USA, pp.139-147.
19. Ibach, R. E., Clemons, C. M., and Stark, N. (2004). "Combined ultraviolet and water exposure as a preconditioning method in laboratory fungal durability testing". in: Proc. of the 7th International Conf. on Woodfiber-Plastic Composites. Forest Products Society, May 19-20, Madison WI, USA, pp.61-67.
20. ISO 4589-2 (1996). "Plastics-Determination of burning behaviour by oxygen index-Part 2: Ambient temperature test".
21. Kiziltas, A., Nazari, B., Gardner D. J., and Bousfield, D. W. (2014). "Polyamide 6-cellulose composites: Effect of cellulose composition on melt rheology and crystallization behaviour". Polym. Eng. Sci. 54(4), 739-746. DOI: 10.1002/pen.23603
22. Larsson-Brelid, P., Segerholm, B. K., Westin, M., and Wålinder, M. E. P. (2006). "Wood plastic composites from modified wood, Part 1: Conceptual idea, mechanical and physical properties". IRG: The 37th Ann. Mtg., IRG/WP 06-40338, Tromsø, Norway.
23. Li, J. Z., Furuno, T., Katoh, S., and Uehara, T. (2000a). "Chemical modification of wood by anhydrides without solvents or catalysts". J. Wood Sci. 46(3), 215-221. DOI: 10.1007/BF00776452
24. Li, J. Z., Furuno, T., and Katoh, S. (2000b). "Dimensional stability and flame resistance of silicate acetylated and propionylated wood composites". J. Wood Chem. Technol. 20(4), 441-453. DOI: 10.1080/02773810009351893
25. Li, J. Z., Furuno, T., and Katoh, S. (2001). "Wood propionylation in the presence of catalysts". Wood Fiber Sci. 33(2), 255-263.
26. Lisperguer, J., Droguett, C., Ruf, B., and Nunez, M. (2007). "The effect of wood acetylation on thermal behavior of wood-polystyrene composites". J. Chil. Chem. Soc. 52(1), 1073-1075.
27. 13C NMR investigation". IRG 39th Annual Conference, IRG/WP 08-30457, Istanbul, Turkey.
28. Luz, S. M., Del Tio, J., Rocha, G. J. M., Gonçalves, A. R., and Del'Arco Jr., A. P. (2008). "Cellulose and cellulignin from sugarcane bagasse reinforced polypropylene composites: Effect of acetylation on mechanical and thermal properties". Composites A: Applied Science and Manufacturing 39(9), 1362-1369. DOI: 10.1016/j.compositesa.2008.04.014
29. Mahlberg, R., Paajanen, L., Nurmi, A., Kivistö, A., Koskela, K., and Rowell, R. M. (2001). "Effect of chemical modification of wood on the mechanical and adhesion properties of wood fiber/polypropylene fiber and polypropylene/veneer composites". Holz Roh Werkst. 59(5), 319-326. DOI: 10.1007/s001070100232
30. Mat Taib, R., Ramarad, S., Mohd Ishak, Z. A., and Rozman, H. D. (2010). "Effect of acetylation and MAPE on the properties of steam-exploded Acacia mangium fiber-HDPE composites". J. Reinf. Plast. Compos. 29(3), 431-444. DOI: 10.1177/0731684408098004
31. Ozmen, N., Cetin, N. S., Mengeloğlu, F., Birinci, E., and Karakus, K. (2013a). "Effect of wood acetylation with vinyl acetate and acetic anhydride on the properties of wood-plastic composites". BioResources 8(1), 753-767.
32. Ozmen, N., Cetin, N. S., Mengeloğlu, F., and Birinci, E. (2013b). "Vinyl acetate modified scots pine reinforced HDPE composites: Influence of various levels of modification on mechanical and thermal properties". BioResources 8(1), 1361-1373.
33. Papadopoulos, A. N., and Gkaraveli, A. (2003). "Dimensional stabilisation and strength of particleboard by chemical modification with propionic anhydride". Eur. J. Wood Prod. 61(2), 142-144. DOI: 10.1007/S00107-002-0363-4
34. Raj, R. G., and Kokta, B. V. (1991). "Improving the mechanical properties of HDPE-wood fiber composites with additives/coupling agents". in: ANTEC. Proc. 49th Annual Technical Conference, Montreal, Canada, pp. 1883-1885.
35. Rowell, R. M. (2005). "Chemical modification of wood". in: Handbook of Wood Chemistry and Wood Composites, R. M. Rowell, (ed.), CRC Press, Boca Raton, FL, pp. 381-420.
36. Rowell, R. M., O'Dell, J. L., and Rials, T. G. (1994). "Chemical modification of agro-fiber for thermoplasticization". Second Pacific Rim Bio-Based Composites Symposium, Vancouver, Canada, pp. 144-152.
37. Serin, Z. O. (2005). "The effects of succinic anhydride modification on properties of medium density fiberboard (MDF)". Ph.D. thesis, Institute of Natural Science, Karadeniz Technical University, Trabzon.
38. Sundar, S. T. (2005). Chemical Modification of Wood Fiber to Enhance the Interface between Wood and Polymer in Wood Plastic Composites, M.S. thesis, College of Graduate Studies, University of Idaho, Moscow.
39. Sundar, S. T., McDonald, A. G., and Wolcott, M. (2004). "Interphase enhancement and evaluation of properties of WPC". in: Proc. Progress in Woodfibre-Plastic Composites Conference, Toronto, Ontario, Canada.
40. Thomas S., Paul, S. A., Pothan, L. A., and Deepa, B. (2011). "Natural fibres: Structure, properties and applications". in: Cellulose Fibers: Bio-and Nano-Polymer Composites, S. Kalia, B. S. Kaith, and I. Kaur (eds.), Springer, Berlin, pp. 3-47.
41. Tserki, V., Matzinos, P., and Panayiotou, C. (2006). "Novel biodegradable composites based on treated lignocellulosic waste flour as filler. Part II. Development of biodegradable composites using treated and compatibilized waste flour". Composites A: Applied Science and Manufacturing 37(9), 1231-1238.