Vinyl acetate modified scots pine reinforced hdpe composites: Influence of various levels of modification on mechanical and thermal properties

BioResources

Volumn 8, Issue 1, 2013, Pages 1361-1373

  Özmen, Nilgül ^a   Çetin, Nihat Sami ^a   Mengeloǧlu, Fatih ^a   Birinci, Emre ^b  

^a KAHRAMANMARAS SUTCU IMAM UNIVERSITY   (Turkey)

^b KASTAMONU UNIVERSITY   (Turkey)

Author keywords

Acetic anhydride; Acetylation; High density polyethylene; Scots pine; Vinyl acetate; Wood plastic composites

Indexed keywords

ACETYLATION; EXTRUSION MOLDING; HIGH DENSITY POLYETHYLENES; INJECTION MOLDING; REINFORCEMENT; TENSILE STRENGTH; WOOD; WOOD PRODUCTS;

ACETIC ANHYDRIDES; INJECTION MOLDING PROCESS; MECHANICAL AND THERMAL PROPERTIES; MORPHOLOGICAL PROPERTIES; SCOTS PINE; VINYL ACETATES; WEIGHT PERCENTAGE GAINS; WOOD PLASTIC COMPOSITE;

FORESTRY;

ACETIC ANHYDRIDE; ACETYLATION; MECHANICAL PROPERTIES; PINUS SYLVESTRIS; POLYMER WOOD COMBINATIONS; REINFORCEMENT; TENSILE STRENGTH; VINYL ACETATE; WOOD PRODUCTS;

EID: 84876144552     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: 10.15376/biores.8.1.1361-1373     Document Type: Article

References (23)

1. Abdul Khalil, H. P. S., Issam, A. M., Ahmad Shakri, M. T., Suriani, R., and Awang, A. Y. (2007). "Conventional agro-composites from chemically modified fibres," Indust. Crops & Prods. 26(3), 315-323.
2. American Society for Testing and Materials (2001). ASTM D638, "Standard test method for tensile properties of plastics," ASTM, West Conshohocken.
3. American Society for Testing and Materials (2005a). ASTM D6109, "Standard test methods for flexural properties of unreinforced and reinforced plastic lumber and related products," ASTM, West Conshohocken.
4. American Society for Testing and Materials (2005b). ASTM D256, "Standard test methods for impact resistance of plastics and electrical insulating materials," ASTM, West Conshohocken.
5. American Society for Testing and Materials (2007). ASTM D792, "Standard test method for density and specific gravity (relative density) of plastics by displacement," ASTM, West Conshohocken.
6. Bledzki, A. K., Reihmane, S., and Gassan, J. (1998). "Thermoplastic reinforced with wood fillers: A literature review," Polym.-Plast. Techn. & Eng. 37, 451-468.
7. Çetin, N. S. (2000). "Surface activation of lignocellulosics by chemical modification," PhD Thesis, University of Wales Bangor, UK.
8. George, J., Sreekala, M. S., and Thomas, S. (2001). "A review on interface modification and characterization of natural fiber reinforced plastic composites," J. Polym. Eng.
9. Hill, C. A. S. (2006). "Modifying the properties of wood," In Wood Modification: Chemical, Thermal and Other Processes, John Wiley and Sons, Ltd., England.
10. Karnani, R., Mohan, K., and Ramini, N. (1997). "Biofiber-reinforced polypropylene composites," Polym. Eng. & Sci. 37(2), 476-483.
11. Klyosov, A. A. (2007). "Foreword - Overview: Wood-plastic composites," In: Wood Plastic Composites, John Wiley and Sons, Inc., New Jersey, USA.
12. Kokta, B. V., Raj, R. G., and Daneault, C. (1989). "Use of wood flour as filler in polypropylene: Studies on mechanical properties," Polym. Plast. Tech. Eng. 28, 247- 259.
13. Lisperguer, J., Droguett, C., Ruf, B., and Nunez, M. (2007). "The effect of wood acetylation on thermal behavior of wood-polystyrene composites," J. Chil. Chem. Soc. 52(1), 1-6.
14. Luz, S. M., Del Tio, J., Rocha, G. J. M., Gonçalves, A. R., and Del'Arco Jr., A. P. (2008). "Cellulose and cellulignin from sugarcane bagasse reinforced polypropylene composites: Effect of acetylation on mechanical and thermal properties," Composites: Part A 39, 1362-1369.
15. Mat Taib, R., Ramarad, S., and Modh Ishak, Z. A. (2010). "Effect of acetylation and MAPE on the properties of steam-exploded Acacia mangium Fiber-HDPE composites," J. Reinforced Plast. & Comp. 29(3), 431-444.
16. Mathew, L., Joshy, M. K., and Joseph, R. (2011). "Isora fiber: A natural reinforcement for the development of high performance engineering materials," In Cellulose Fibers: Bio- and Nano- Polymer Composites, Kalia, S., Kaith, B. S., and Kaur, I. (eds.), Springer, Berlin, 291-324.
17. Mohanty, A. K., Misra, M., Hinrichsen, G. (2000). "Biofiber, biodegradable polymers and biocomposites; An overview," Macromol. Mat. Eng. 276/277, 1-24.
18. Özmen, N. (2012). "A study of the effect of acetylation on hemp fibres with vinyl acetate," BioResources 7(3), 3800-3809.
19. Özmen, N., Çetin, N. S., Mengeloǧlu, F., Birinci, E., and Karakuş, K. (2013). "Effect of Vinyl Acetate Modification on the Properties of Wood-Plastic Composites," BioResources 8(1), 753-767.
20. Rials, T. G., Wolcott, M. P., Nassar, J. M. (2001). "Interfacial lignocellulosic fiber- reinforced polyurethane composites," J. Appl. Polym. Sci. 80(4), 546-555.
21. Sanadi, A. R., Rowell, R. M., and Caulfield, D. (1996). "Agro based fiber/polymer composites, blends and alloys," Polym. News 20, 7-17.
22. Tserki, V., Matzinoz, P., and Panayiotou, C. (2006). "Novel biodegradable composites based on treated lignocellulosic waster flour as filler. Part II. Development of biodegradable composites using treated and compatibilized waste flour," Composites: Part A 37, 1231-1238.
23. Zafeiropoulos, N. E., Williams, D. R., Baillie, C. A., and Matthews, F. L. (2002). "Engineering and characterization of the interface in flax fibre/polypropylene composites materials. Part I: Development and Investigation of Surface Treatments," Composites: Part A, 33, 1083-1093.