A thermo-mechanical large deformation constitutive model for polymers based on material network description: Application to a semi-crystalline polyamide 66

International Journal of Plasticity

Volumn 67, Issue , 2015, Pages 102-126

  Maurel Pantel, A ^a   Baquet, E ^b   Bikard, J ^c   Bouvard, J L ^b   Billon, N ^b  

^a LABORATOIRE DE MÉCANIQUE ET D ACOUSTIQUE   (France)

^b PSL RESEARCH UNIVERSITY   (France)

^c Rhodia   (France)

Author keywords

A. Thermomechanical processes; B. Constitutive behaviour; B. Elastic viscoplastic material; B. Polymeric material; Disentanglement slip link

Indexed keywords

COMPLEX NETWORKS; CONSTITUTIVE EQUATIONS; CONSTITUTIVE MODELS; CRYSTALLINE MATERIALS; DEFORMATION; QUANTUM ENTANGLEMENT; STRAIN RATE; TEMPERATURE; TEMPERATURE MEASUREMENT; POLYMERS;

CONSTITUTIVE BEHAVIOUR; DIGITAL IMAGE CORRELATIONS; DISENTANGLEMENT/SLIP-LINK; ELASTIC-VISCOPLASTIC MATERIAL; INTERNAL STATE VARIABLES; STRESS STATE DEPENDENCES; THERMO-MECHANICAL COUPLING; THERMOMECHANICAL PROCESS; DISENTANGLEMENT / SLIP-LINK; THREE DIMENSIONAL CONSTITUTIVE EQUATION;

POLYMERS; STRAIN RATE;

EID: 84911131976     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2014.10.004     Document Type: Article

References (87)

1. S. Ahzi, A. Makradi, R.V. Gregory, and D.D. Edie Modeling of deformation behavior and strain-induced crystallization in poly(ethylene terephthalate) above the glass transition temperature Mech. Mat. 35 2003 1139 1148
2. N.M. Ames, V. Srivastava, S.A. Chester, and L. Anand A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: Applications Int. J. Plast. 25 2009 1495 1539
3. L. Anand, and M.E. Gurtin A theory of amorphous solids undergoing large deformations, with application to polymeric glasses Int. J. Solids Struct. 40 2003 1465 1487
4. L. Anand, and N.M. Ames On modeling the micro-indentation response of an amorphous polymer Int. J. Plast. 22 2006 1123 1170
5. L. Anand, N.M. Ames, V. Srivastava, and S.A. Chester A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation Int. J. Plast. 25 2009 1474 1494
6. R.D. Andrews, and A.V. Tobolsky Elastoviscous properties of polyisobutylene. IV. Relaxation time spectrum and calculation of bulk viscosity J. Polym. Sci. 7 1952 221 242
7. E.M. Arruda, M.C. Boyce, and R. Jayachandran Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers Mech. Mat. 19 1995 193 212
8. G. Ayoub, F. Zaïri, M. Naït-Abdelaziz, and J.M. Gloaguen Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: application to a high density polyethylene Int. J. Plast. 26 30 2010 329 347
9. G. Ayoub, F. Zaïri, C. Fréderix, J.M. Gloaguen, M. Naït-Abdelaziz, R. Seguela, and J.M. Lefebvre Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: experiments and constitutive modelling Int. J. Plast. 27 4 2011 492 511
10. R. Ball, M. Doi, S. Edwards, and M. Warner Elasticity of entangled networks Polymer 22 1981 1010 1018
11. S.G. Bardenhagen, M.G. Stout, and G.T. Gray Three-dimensional, finite deformation, viscoplastic constitutive models for polymeric materials Mech. Mat. 25 1997 235 253
12. F. Bédoui, J. Diani, G. Régnier, and W. Seiler Micromechanical modeling of isotropic elastic behavior of semicrystalline polymers Acta Mater. 54 2006 1513 1523
13. S. Belbachir, F. Zaïri, G. Ayoub, U. Maschke, M. Naït-Abdelaziz, J.M. Gloaguen, M. Benguediab, and J.M. Lefebvre Modelling of photodegradation effect on elastic-viscoplastic behaviour of amorphous polylactic acid films J. Mech. Phys. Solids 58 2010 241 255
14. N. Billon New constitutive modelling for time-dependent mechanical behaviour of polymers close to glass transition: fundamental and experimental validation J. Appl. Polym. Sci. 125 6 2012 4390 4401
15. J.L. Bouvard, D.K. Ward, D. Hossain, S. Nouranian, E.B. Marin, and M.F. Horstemeyer Review of hierarchical multiscale modeling to describe the mechanical behavior of amorphous polymers J. Eng. Mater. Technol. 131 4 2009 041206
16. J.L. Bouvard, D.K. Ward, D. Hossain, E.B. Marin, D.J. Bammann, and M.F. Horstemeyer A general inelastic internal state variables model for amorphous glassy polymers Acta Mech. 213 1 2010 71 96
17. J.L. Bouvard, D.K. Francis, M.A. Tschopp, E.B. Marin, D.J. Bammann, and M.F. Horstemeyer An internal state variable material model for predicting the time, thermomechanical, and stress state dependence of amorphous glassy polymers under large deformation Int. J. Plast. 42 2013 168 193
18. M.C. Boyce, D.M. Parks, and A.S. Argon Large inelastic deformation of glassy polymers. Part I: Rate dependent constitutive model Mech. Mat. 7 1988 15 33
19. M.C. Boyce, S. Socrate, and P.G. Llana Constitutive model for the finite deformation stress-strain behavior of poly(ethylene terephthalate) above the glass transition Polymer 41 2000 2183 2201
20. M.C. Boyce, G.G. Weber, and D.M. Parks On the kinematics of finite strain plasticity J. Mech. Phys. Solids 37 1989 647 665
21. C.P. Buckley, and D.C. Jones Glass-rubber constitutive model for amorphous polymers near the glass transition Polymer 36 1995 3301 3312
22. J. Chaboche Thermodynamic formulation of constitutive equations and application to the viscoplasticity and viscoelasticity of metals and polymers Int. J. Sol. Struct. 34 1997 2239 2254
23. O. Colak Modeling deformation behavior of polymers with viscoplasticity theory based on overstress Int. J. Plast. 21 2005 145 160
24. B. Coleman, and M. Gurtin Thermodynamics with internal state variables J. Chem. Phys. 47 1967 597 613
25. A.D. Drozdov Mullins' effect in semicrystalline polymers Int. J. Sol. Struct. 46 2009 3336 3345
26. R.B. Dupaix, and D. Krishnan A constitutive model for strain-induced crystallization in poly(ethylene terephthalate) (PET) during finite strain load-hold simulations J. Eng. Mater. Technol. 128 2006 28 33
27. N. Dusunceli, and O.U. Colak Modelling effects of degree of crystallinity on mechanical behavior of semicrystalline polymers Int. J. Plast. 24 7 2008 1224 1242
28. S.F. Edwards, and T. Vilgis The effect of entanglements in rubber elasticity Polymer 27 1986 483 492
29. P. Germain, Q. Nguyen, and P. Suquet Continuum thermodynamics J. Appl. Mech. 50 1983 1010 1020
30. E. Ghorbel A viscoplastic constitutive model for polymeric materials Int. J. Plast. 24 2008 2032 2058
31. E. Gorlier, J.M. Haudin, and N. Billon Strain induced crystallization in bulk amorphous PET under uni-axial loading Polymer 42 2001 9541 9549
32. L.E. Govaert, P.H.M. Timmermans, and W.A.M. Brekelmans The influence of intrinsic strain softening on strain localization in polycarbonate: modeling and experimental validation J. Eng. Mater. Technol. 122 2000 177 185
33. C. G'Sell, and J.J. Jonas Determination of the plastic behaviour of solid polymers at constant true strain-rate Mat. Sci. 14 1979 583 591
34. C. G'sell, J.M. Hiver, and A. Dahoun Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking Int. J. Sol. Struct. 39 2002 3857 3872
35. O. Gueguen, J. Richeton, S. Ahzi, and A. Makradi Micromechanically based formulation of the cooperative model for the yield behavior of semi-crystalline polymers Acta Mater. 56 2008 1650 1655
36. M. Gurtin An Introduction to Continuum Mechanics 1981 Academic Press San Diego, CA
37. M.E. Gurtin, and L. Anand The decomposition F = FeFp, material symmetry, and plastic irrotationality for solids that are isotropic-viscoplastic or amorphous Int. J. Plast. 21 2005 1686 1719
38. R.N. Haward, and G. Thackray The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics Proc. Roy. Soc. Lond. 302 1968 453 472
39. G.A. Holzapfel Nonlinear Solid Mechanics: A Continuum Approach for Engineering 2000 J. Wiley & Sons Ltd. Chichester
40. M.A. Kennedy, A.J. Peacock, and L. Mandelkern Tensile properties of crystalline polymers: linear polyethylene Macromolecules 27 19 1994 5297 5310
41. A. Khan, and H. Zhang Finite deformation of a polymer: experiments and modeling Int. J. Plast. 17 2001 1167 1188
42. A. Khan, O. Lopez-Pamies, and R. Kazmi Thermo-mechanical large deformation response and constitutive modeling of viscoelastic polymers over a wide range of strain-rates and temperatures Int. J. Plast. 22 2006 581 601
43. F. Khan, and C. Yeakle Experimental investigation and modeling of non-monotonic creep behavior in polymers Int. J. Plast. 27 4 2011 512 521
44. E. Krempl, and F. Khan Rate (time)-dependent deformation behavior: an overview of some properties of metals and solid polymers Int. J. Plast. 19 2003 1069 1095
45. E. Kröner Allgemeine Kontinuumstheorie der Versetzungen und Eigenspannungen Arch. Ration. Mech. Anal. 4 1960 273 334
46. D. Lai, I. Yakimets, and M. Guignon A non linear viscoelastic model developed for semi-crystalline polymer deformed at small strains with loading and unloading paths Mat. Sci. Eng. A. 405 2005 266 271
47. B.J. Lee, D.M. Parks, and S. Ahzi Micromechanical modeling of large plastic deformation and texture evolution in semi-crystalline polymers J. Mech. Phys. Sol. 41 1993 1651 1687
48. B.J. Lee, A.S. Argon, D.M. Parks, S. Ahzi, and Z. Bartczak Simulation of large strain plastic deformation and texture evolution in high density polyethylene Polymer 34 1993 3555 3575
49. E.H. Lee Elastic plastic deformation at finite strain ASME J. Appl. Mech. 36 1969 1 6
50. S.Y. Lee, D.C. Bassett, and R.H. Olley Lamellar deformation and its variation in drawn isolated polyethylene spherulites Polymer 44 19 2003 5961 5967
51. G. Li, and A. Shojaei A viscoplastic theory of shape memory polymer fibres with application to self-healing materials Proc. Roy. Soc. A: Math. Phys. Eng. Sci. 468 2012 2319 2346
52. A. Makradi, S. Ahzi, R.V. Gregory, and D.D. Edie A two-phase self-consistent model for the deformation and phase transformation behavior of polymers above the glass transition temperature: application to PET Int. J. Plast. 21 2005 741 758
53. Y. Marco, L. Chevalier, and M. Chaouche WAXD study of induced crystallization and orientation in poly(ethylene terephtalate) during biaxial elongation Polymer 43 2002 6569 6574
54. A. Maurel-Pantel, E. Baquet, J. Bikard, and N. Billon Coupled thermo mechanical characterisation of polymers based on inverse analyses and IR measurements Appl. Mech. Mat. 70 2011 393 398
55. B. Meissner, and L. Matejka Comparison of recent rubber elasticity theories with biaxial stress strain data: the slip-link theories of Edwards and Vilgis Polymer 43 2002 3803 3809
56. S. Moreau, A. Chrysochoos, J. Muracciole, and B. Wattrisse Analysis of thermoelastic effects accompanying the deformation of PMMA and PC polymers Comptes Rendus Mécanique. 333 2005 648 653
57. S. Nikolov, and I. Doghri A micro/macro constitutive model for the small deformation behavior of polyethylene Polymer 41 2000 1883 1891
58. S. Nikolov, I. Doghri, O. Pierard, L. Zealouk, and A. Goldberg Multi-scale constitutive modelling for the small deformations of semi-crystalline polymers J. Mech. Phys. Solids. 50 2002 2275 2302
59. F. Pierron, and A. Vautrin Measurement of in-plane shear strengths of unidirectional composites with the Iosipescu test Comp. Sci. Techno. 57 1997 1653 1660
60. M. Ponçot, F. Addiego, and A. Dahoun True intrinsic mechanical behaviour of semi-crystalline and amorphous polymers: influences of volume deformation and cavities shape Int. J. Plast. 40 2013 126 139
61. M. Pyrz, and F. Zaïri Identification of viscoplastic parameters of phenomenological constitutive equations for polymers by deterministic and evolutionary approach Mod. Simul. Mat. Sci. Eng. 15 2007 85 103
62. C. Regrain, L. Laiarinandrasana, S. Toillon, and K. Saï Multi-mechanism models for semi-crystalline polymer: constitutive relations and finite element implementation Int. J. Plast. 25 2009 1253 1279
63. J. Richeton, S. Ahzi, K.S. Vecchio, F.C. Jiang, and A. Makradi Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates Int. J. Solids Struct. 44 2007 7938 7954
64. E. Roguet, S. Castagnet, and J. Grandidier Mechanical features of the rubbery amorphous phase in tension and torsion in a semi-crystalline polymer Mech. Mat. 39 2007 380 391
65. E. Roux, and P.-O. Bouchard Kriging metamodel global optimization of clinching joining processes accounting for ductile damage J. Mat. Proc. Tech. 213 7 2013 1038 1047
66. A. Rozanski, and A. Galeski Plastic yielding of semicrystalline polymers affected by amorphous phase Int. J. Plast. 41 2013 14 29
67. A. Shojaei, G. Li, and G.Z. Voyiadjis Cyclic viscoplastic-viscodamage analysis of shape memory polymers fibers with application to self-healing smart materials J. Appl. Mech. 80 2013 11 14
68. V. Srivastava, S.A. Chester, N.M. Ames, and L. Anand A thermomechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition Int. J. Plast. 26 2010 1138 1182
69. V. Srivastava, S.A. Chester, and L. Anand Thermally-actuated shape-memory polymers: experiments, theory, and numerical simulations J. Mech. Phys. Sol. 58 2010 1100 1124
70. J. Sweeney, and I.M. Ward Rate dependent and network phenomena in the multiaxial drawing of PVC Polymer 36 1995 299 308
71. J. Sweeney, and I.M. Ward A constitutive law for large deformation of polymers at high temperatures J. Mech. Phys. Sol. 44-7 1996 1033 1049
72. J. Sweeney, T. Collins, P. Coates, and I. Ward Application of an elastic model to the large deformation, high temperature stretching of polypropylene Polymer 38 1997 5991 5999
73. J. Sweeney, T. Collins, P. Coates, A. Unwin, R. Duckett, and I. Ward Application of a large deformation model to unstable tensile stretching of polyethylene Int. J. Plast. 18 2002 399 414
74. Y. Tomita Constitutive modeling of deformation behavior of glassy polymers and applications Int. J. Mech. Sci. 42 2000 1455 1469
75. M. Uchida, and N. Tada Micro-, meso- to macroscopic modeling of deformation behavior of semi-crystalline polymer Int. J. Plast. 49 2013 164 184
76. K. Urayama, K. Yokoyama, and S. Kohjiya Viscoelastic relaxation of guest linear poly(dymethylsiloxane) in end-linked poly(dimethylsiloxane) networks Macromolecules 34 2001 4513 4518
77. D. Valentin, F. Paray, and B. Guetta The hygrothermal behaviour of glass fibre reinforced PA66 composites: a study of the effect of water absorption on their mechanical properties J. Mat. Sci. 22 1987 46 56
78. J.A.W. van Dommelen, D.M. Parks, M.C. Boyce, W.A.M. Brekelmans, and F.P.T. Baaijens Micromechanical modeling of the elasto-viscoplastic behavior of semi-crystalline polymers J. Mech. Phys. Solids 51 2003 519 541
79. J. Verdu Action de l'eau sur les plastiques Techniques de l'ingénieur. Plastiques et composites 1 2000 1 8
80. G.Z. Voyiadjis, A. Shojaei, and G. Li A generalized coupled viscoplastic-viscodamage-viscohealing theory for glassy polymers Int. J. Plast. 28 1 2012 21 45
81. P.D. Wu, and E. van der Giessen On neck propagation in amorphous glassy polymers under plane strain tension Int. J. Plast. 11 1995 211 235
82. F. Zaïri, K. Woznica, and M. Naït-Abdelaziz Phenomenological nonlinear modelling of glassy polymers Comptes Rendus Mecanique 333 2005 359 364
83. F. Zaïri, M. Naït-Abdelaziz, K. Woznica, and J.M. Gloaguen Constitutive equations for the viscoplastic-damage behaviour of a rubber-modified polymer Eur. J. Mech. A: Solids 24 2005 169 182
84. F. Zaïri, M. Naït-Abdelaziz, K. Woznica, and J.M. Gloaguen Elasto-viscoplastic constitutive equations for the description of glassy polymers behavior at constant strain rate J. Eng. Mat. Technol. 129 2007 29 35
85. F. Zaïri, M. Naït-Abdelaziz, J.M. Gloaguen, and J.M. Lefebvre Modelling of the elasto-viscoplastic damage behaviour of glassy polymers Int. J. Plast. 24 2008 945 965
86. F. Zaïri, M. Naït-Abdelaziz, J.M. Gloaguen, and J.M. Lefebvre Constitutive modelling of the large inelastic deformation behaviour of rubber-toughened poly(methyl methacrylate): effects of strain rate, temperature and rubber-phase volume fraction Mod. Sim. Mat. Sci. Eng. 18 2010 1 22
87. F. Zaïri, M. Naït-Abdelaziz, J.M. Gloaguen, and J.M. Lefebvre A physically-based constitutive model for anisotropic damage in rubber-toughened glassy polymers during finite deformation Int. J. Plast. 27 2011 25 51