Plastic yielding of semicrystalline polymers affected by amorphous phase

International Journal of Plasticity

Volumn 41, Issue , 2013, Pages 14-29

  Rozanski, Artur ^a   Galeski, Andrzej ^a  

^a CENTRE OF MOLECULAR AND MACROMOLECULAR STUDIES   (Poland)

Author keywords

Plasticity; Semicrystalline polymers; Swelling; Yield stress

Indexed keywords

AMORPHOUS PHASE; BASAL PLANES; CRYSTAL PLASTICITY; CRYSTALLINE PHASE; CRYSTALLINE POLYMERS; EXTERNAL LOADS; FIXED ENDS; LOW MOLECULAR WEIGHT; PLASTIC YIELDING; POLYAMIDE 6; SEMI-CRYSTALLINE POLYMER; SEMICRYSTALLINES; STRESS REDUCTION; UNIAXIAL TENSIONS; YIELD POINTS;

DESORPTION; PLASTICITY; POLYPROPYLENES; SWELLING; THERMOPLASTICS; YIELD STRESS;

POLYMERS;

EID: 84871712213     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2012.07.008     Document Type: Article

References (63)

1. A.S. Argon, and R.E. Cohen Toughenability of polymers Polymer 44 2003 6013 6032
2. A.S. Argon, A. Galeski, and T. Kazmierczak Rate mechanisms of plasticity in semi-crystalline polyethylene Polymer 46 2005 11798 11805
3. G. Ayoub, F. Zaďri, M. Naďt-Abdelaziz, and J.M. Gloaguen Modelling large deformation behaviour under loading-unloading of semicrystalline polymers: application to a high density polyethylene Int. J. Plast. 26 2010 329 347
4. G. Ayoub, F. Zaïri, C. Fréderix, J.M. Gloaguen, M. Naït-Abdelaziz, R. Seguela, and J.M. Lefebvre Effects of crystal content on the mechanical behaviour of polyethylene under finite strains: experiments and constitutive modeling Int. J. Plast. 27 2011 492 511
5. Z. Bartczak, R.E. Cohen, and A.S. Argon Evolution of the crystalline texture of high-density polyethylene during uniaxial compression Macromolecules 25 1992 4692 4704
6. Z. Bartczak, A.S. Argon, and R.E. Cohen Deformation mechanisms and plastic resistance in single-crystal-textured high-density polyethylene Macromolecules 25 1992 5036 5053
7. Z. Bartczak, A.S. Argon, and R.E. Cohen Texture evolution in large strain simple shear deformation of high density polyethylene Polymer 35 1994 3427 3441
8. C. Bonten, and E. Schmachtenberg A new hypothesis to describe the mechanisms acting in a welded joint of semicrystalline thermoplastics Polym. Eng. Sci. 41 2001 475 483
9. I. Boukal Effect of water on the mechanism of deformation of nylon 6 J. Appl. Polym. Sci. 11 1967 1483 1494
10. P.B. Bowden, and R.J. Young Deformation mechanisms in crystalline polymers J. Mater. Sci. 9 1974 2034 2051
11. N.W.J. Brooks, and M. Mukhtar Temperature and stem length dependence of the yield stress of polyethylene Polymer 41 2000 1475 1480
12. H.H. Church, J.S. Lin, and R.S. Porter On deformation of polyethylene: the question of melting and recrystallization Macromolecules 19 1986 2732 2736
13. B. Crist, C.J. Fisher, and P. Howard Mechanical properties of model polyethylenes: tensile elastic modulus and yield stress Macromolecules 22 1989 1709 1718
14. O. Darras, and R. Séguéla Tensile yield of polyethylene in relation to crystal thickness J. Polym. Sci. Part B: Polym. Phys. 31 1993 759 766
15. B. Farrokh, and A.S. Khan A strain rate dependent yield criterion for isotropic polymers: low to high rates of loading Eur. J. Mech. A: Solids 29 2010 274 282
16. P.J. Flory, and D.Y. Yoon Molecular morphology in semi-crystalline polymers Nature 272 1978 226 229
17. C. G'Sell, J.M. Hiver, and A. Dahoun Experimental characterization of deformation damage in solid polymers under tension, and its interrelation with necking Int. J. Solids Struct. 39 2002 3857 3872
18. A. Galeski Strength and toughness of crystalline polymer systems Prog. Polym. Sci. 28 2003 1643 1699
19. A. Galeski, Z. Bartczak, T. Kazmierczak, and M. Slouf Morphology of undeformed and deformed polyethylene lamellar crystals Polymer 51 2010 5780 5787
20. J.M. Haudin Plastic Deformation of Amorphous and Semicrystalline Materials 1982 Les Editeurs de Physique Paris 291
21. R.N. Haward, and R.J. Young The Physics of Glassy Polymers 1997 Chapman & Hall London
22. J. Hirschinger, H. Miura, K.H. Gardner, and A.D. English Segmental dynamics in the crystalline phase of nylon 66: solid state deuterium NMR Macromolecules 23 1990 2153 2169
23. D.C. Hookway The cold-drawing of nylon66 J. Text. Inst. 49 1958 292
24. S. Humbert, G. Lame, and G. Vigier Polyethylene yielding behavior: what is behind the correlation between yield stress and crystallinity? Polymer 50 2009 3755 3761
25. B.Z. Jang, D.R. Uhlmann, and J.B. Vander Sande Rubber-toughening in polypropylene J. Appl. Polym. Sci. 30 1985 2485 2504
26. T. Kazmierczak, A. Galeski, and A.S. Argon Plastic deformation of polyethylene crystals as a function of crystal thickness and compression rate Polymer 46 2005 8926 8936
27. M.A. Kennedy, A.J. Peacock, and L. Mandelkern Tensile properties of crystalline polymers: linear polyethylene Macromolecules 27 1994 5297 5310
28. A.S. Khan, and B. Farrokh Thermo-mechanical response of nylon 101 under uniaxial and multi-axial loadings: Part I. Experimental results over wide ranges of temperatures and strain rates Int. J. Plast. 22 2006 1506 1529
29. M. Kryszewski, A. Galeski, T. Pakula, and R. Szylhabel Polimery (Polish) 16 1971 8 11
30. L. Lin, and A.S. Argon Structure and plastic deformation of polyethylene J. Mater. Sci. 29 1994 294 323
31. L. Lin, and A.S. Argon Structure and plastic deformation of polyethylene J. Mater. Sci. 29 1994 294 323
32. V.M. Litvinov, and J.P. Penning Phase composition and molecular mobility in nylon 6 fibers as studied by proton NMR transverse magnetization relaxation Macromol. Chem. Phys. 205 2004 1721 1734
33. J.W. Maher, R.N. Haward, and J.N. Hay Study of the thermal effects in the necking of polymers with the use of an infrared camera J. Polym. Sci. Part B: Polym. Phys. 18 1980 2169 2179
34. I. Marshall, and A.B. Thompson The cold drawing of high polymers Proc. R. Soc. Lond. 221A 1954 541
35. G. Meinel, and A.J. Peterlin Plastic deformation of polyethylene II. Change of mechanical properties during drawing J. Polym. Sci. Part B: Polym. Phys. 9 1971 67 83
36. Y. Men, J. Riegel, and G. Strobl Role of the entangled amorphous network in tensile deformation of semicrystalline polymers Phys. Rev. Lett. 91 2003 95502-1 95502-4
37. Muller, F.H., 1949. Zum Problem der Kaltverstreckung hochpolymerer Substanzen Kolloid-Z. 114, 59-61.
38. N.S. Murthy, M. Stamm, J.P. Sibilia, and S. Krimm Structural changes accompanying hydration in nylon 6 Macromolecules 22 1989 1261 1267
39. K.H. Nitta, and M. Takayanagi Role of tie molecules in the yielding deformation of isotactic polypropylene J. Polym. Sci. Part B: Polym. Phys. 37 1999 357 368
40. W.J. O'Kane, R.J. Young, and A.J. Ryan The effect of annealing on the structure and properties of isotactic polypropylene films J. Macromol. Sci. Phys. B 34 1995 427 458
41. E.F. Oleinik Plasticity of semicrystalline flexible-chain polymers at the microscopic and mesoscopic levels Polym. Sci. Ser. C 45 2003 17 117
42. R.H. Olley, and D.C. Bassett On surface-morphology and drawing of polypropylene films J. Macromol. Sci. Phys. B33 1994 209 227
43. R.H. Olley, A.M. Hodge, and D.C. Bassett A permanganic etchant for polyolefines J. Polym. Sci. Polym. Phys. Ed. 17 1979 627 643
44. A. Pawlak Cavitation during tensile deformation of high-density polyethylene Polymer 48 2007 1397 1409
45. A. Pawlak, and A. Galeski Cavitation during tensile deformation of polypropylene Macromolecules 41 2008 2839 2851
46. J. Perez Physics and Mechanics of Amorphous Polymers 1998 Balkema Rotterdam
47. J.M. Peterson Thermal initiation of screw dislocations in polymer crystal platelets J. Appl. Phys. 37 1966 4047 4050
48. J.M. Peterson Peierls stress for screw dislocations in polyethylene J. Appl. Phys. 39 1968 4920 4928
49. J.M. Peterson, and P.H. Lindenmeyer Screw dislocations in anisotropic media J. Appl. Phys. 37 1966 4051 4053
50. P.J. Phillips, and R.J. Philipot Direct evidence for melting during drawing of polyethylene J. Polym. Commun. 27 1986 307 309
51. R. Popli, and L. Mandelkern Influence of structural and morphological factors on the mechanical properties of polyethylene J. Polym. Sci. Part B: Polym. Phys. 25 1987 441 483
52. A. Rozanski, and A. Galeski Controlling cavitation of semicrystalline polymers during tensile drawing Macromolecules 44 2011 7273 7287
53. R.J. Samuels Spherulite structure deformation morphology and mechanical properties of isotatic polypropylene fibers J. Polym. Sci. Part C 20 1967 253 265
54. R. Seguela Dislocation approach to the plastic deformation of semicrystalline polymers: kinetic aspects for polyethylene and polypropylene J. Polym. Sci. Part B: Polym. Phys. 40 2002 593 601
55. Seguela, R. 2007. Plasticity of semi-crystalline polymers: crystal slip versus melting-recrystallization. e-Polymers. Art. No. 032.
56. R. Seguela, and O. Darras Phenomenological aspects of the double yield of polyethylene and related copolymers under tensile loading J. Mater. Sci. 29 1994 5342 5352
57. L.G. Shadrake, and F. Guiu Dilocations in polyethylene crystals: line energies and deformation modes Philos. Mag. 34 1976 565 581
58. V. Srivastava, S.A. Chester, N.M. Ames, and L. Anand A thermo-mechanically-coupled large-deformation theory for amorphous polymers in a temperature range which spans their glass transition Int. J. Plast. 26 2010 1138 1182
59. A. Toda Oscillation and instability of neck propagation in poly(ethylene terephthalate) films Polymer 34 1933 2306 2314
60. P.I. Vincent The necking and cold-drawing of rigid plastics Polymer 1 1960 7 19
61. H. Wilhelm, A. Paris, E. Schafler, S. Bernstorff, J. Bonarski, and T. Ungar Evidence of dislocations in melt-crystallised and plastically deformed polypropylene J. Mater. Sci. Eng. A 387-389 2004 1018 1022
62. R.J. Young A dislocation model for yield in polyethylene Philos. Mag. 30 1974 85 94
63. R.J. Young Screw dislocation model for yield in polyethylene Mater. Forum 11 1988 210 216