Preparation, characterization and latent heat thermal energy storage properties of micro-nanoencapsulated fatty acids by polystyrene shell

Applied Thermal Engineering

Volumn 73, Issue 1, 2014, Pages 1160-1168

  Sari, Ahmet ^a   Alkan, Cemil ^a   Altintaş, Ayşe ^a  

^a GAZIOSMANPASA UNIVERSITY   (Turkey)

Author keywords

Emulsion polymerization; Fatty acids; Latent heat thermal energy storage; M NEPCMs; PS

Indexed keywords

DIFFERENTIAL SCANNING CALORIMETRY; DYE-SENSITIZED SOLAR CELLS; EMULSIFICATION; EMULSION POLYMERIZATION; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HEAT STORAGE; LATENT HEAT; PARTICLE SIZE; PARTICLE SIZE ANALYSIS; PHASE CHANGE MATERIALS; PHOSPHORUS; POLYSTYRENES; SCANNING ELECTRON MICROSCOPY; SOLAR HEATING; STORAGE (MATERIALS); THERMAL CONDUCTIVITY; THERMAL ENERGY; THERMOGRAPHY (TEMPERATURE MEASUREMENT);

COOLING APPLICATIONS; DIFFERENTIAL SCANNING CALORIMETER ANALYSIS; FOURIER TRANSFORM INFRA RED (FTIR) SPECTROSCOPY; LATENT HEAT THERMAL ENERGY STORAGE; M-NEPCMS; PHYSICO-CHEMICAL CHARACTERIZATION; POLARIZED OPTICAL MICROSCOPY; THERMAL CYCLING TEST;

FATTY ACIDS;

EID: 84907394460     PISSN: 13594311     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.applthermaleng.2014.09.005     Document Type: Article

References (48)

1. B. Zalba, J.M. Marin, L.F. Cabeza, H. Mehling, Review on thermal energy storage with phase change: materials, heat transfer analysis and applications, Appl. Therm. Eng. 23 (2003) 251-283.
2. G. Susman, Z. Dehouche, T. Cheechern, S. Craig, Tests of prototype PCM 'sails' for office cooling, Appl. Therm. Eng. 31 (2011) 717-726.
3. M. Labat, J. Virgone, D. David, F. Kuznik, Experimental assessment of a PCM to air heat exchanger storage system for building ventilation application, Appl. Therm. Eng. 66 (2014) 375-382.
4. M. Lazaar, S. Bouadila, S. Kooli, A. Farhat, Conditioning of the tunnel greenhouse in the north of Tunisia using a calcium chloride hexahydrate integrated in polypropylene heat exchanger, Appl. Therm. Eng. 68 (2014) 62-68.
5. S. Mondal, Phase change materials for smart textiles e An overview, Appl. Therm. Eng. 28 (2008) 1536-1550.
6. N. Sarier, E. Onder, The manufacturer of microencapsulated phase change materials suitable for the design of thermally enhanced fabrics, Thermochim. Acta 452 (2007) 149-160.
7. N. Sarier, E. Onder, Thermal insulation capability of PEG-containing polyurethane foams, Thermochim. Acta 475 (2008) 15-21.
8. Y.A. Kara, A. Kurnuc¸, Performance of coupled novel triple glass unit and PCM wall, Appl. Therm. Eng. 35 (2012) 243-246.
9. R. Kandasamy, X. Qi Wang, A.S. Mujumdar, Transient cooling of electronics using phase change material (PCM)-based heat sinks, Appl. Therm. Eng. 28 (2008) 1047-1057.
10. M. Jaworski, Thermal performance of heat spreader for electronics cooling with incorporated phase change material, Appl. Therm. Eng. 35 (2012) 212-219.
11. F. Niu, L. Ni, Y. Yao, Y. Yu, H. Li, Performance and thermal charging/discharging features of a phase change material assisted heat pump system in heating mode, Appl. Therm. Eng. 58 (2013) 536-541.
12. A. Sari, A. Karaipekli, Fatty acid esters-based composite phase change materials for thermal energy storage in buildings, Appl. Therm. Eng. 37 (2012) 208-216.
13. Q. Yan, The thermal properties of shape-stabilized fatty acid mixtures used for wallboard, Int. J. Sustain. Energy 02 (2011) 47-54.
14. H. Fauzi, H.S.C. Metselaar, T.M.I. Mahlia, M. Silakhori, Thermo-physical stability of fatty acid eutectic mixtures subjected to accelerated aging for thermal energy storage (TES) application, Appl. Therm. Eng. 66 (2014) 328-334.
15. K. Tumirah, M.Z. Hussein, Z. Zulkarnain, R. Rafeadah, Nano-encapsulated organic phase change material based on copolymer nanocomposites for thermal energy storage, Energy 66 (2014) 881-890.
16. X.X. Zhang, Y.F. Fan, X.M. Tao, K.L. Yick, Fabrication and properties of microcapsules and nanocapsules containing n-octadecane, Mater. Chem. Phys. 88 (2004) 300-307.
17. S.S. Deveci, G. Basal, Preparation of PCM microcapsules by complex coacervation of silk fibroin and chitosan, Coll. Polym. Sci. 287 (2009) 1455-1467.
18. S. Lu, J. Xing, Q. Wu, Preparation and characterization of high stability polyurea microPCMs using a two-step method of adding DETA by interfacial polymerization, J. Fiber Bioeng. Inf. 6 (2013) 185-194.
19. W. Li, G. Song, G. Tang, X. Chu, S. Ma, C. Liu, Morphology, structure and thermal stability of microencapsulated phase change material with copolymer shell, Energy 36 (2011) 785-791.
20. A. Sari, C. Alkan, A. Karaipekli, O. Uzun, Microencapsulated n-octacosane as phase change materials for thermal energy storage, Sol. Energy 83 (2009) 1757-1763.
21. A.R. Shirin-Abadi, A.R. Mahdavian, S. Khoee, New approach for the elucidation of PCM nanocapsules through miniemulsion polymerization with an acrylic shell, Macromol 44 (2011) 7405-7414.
22. L.Y. Wang, P.S. Tsai, Y.M. Yang, Preparation of silica microspheres encapsulating phase-change material by sol-gel method in O/W emulsion, J. Microencapsul. 23 (2006) 3-14.
23. G. Fang, Z. Chen, H. Li, Synthesis and properties of microencapsulated paraffin composites with SiO shell as thermal energy storage materials, Chem. Eng. J. 163 (2010) 154-159.
24. G. Fang, H. Li, F. Yang, X. Liu, S. Wu, Preparation and characterization of nanoencapsulated n-tetradecane as phase change material for thermal energy storage, Chem. Eng. J. 153 (2009) 217-221.
25. S.H. Lee, S.J. Yoon, Y.G. Kim, Y.C. Choi, J.H. Kim, J.G. Lee, Development of building materials by using micro-encapsulated phase change material, Korean J. Chem. Eng. 24 (2007) 332-335.
26. B. Alic, U. Sebenik, M. Krajnc, Microencapsulation of butyl stearate with melamine-formaldehyde resin: effect of decreasing the pH value on the composition and thermal stability of microcapsules, eXPRESS Polym. Lett. 6 (2012) 826-836.
27. M.N.A. Hawlader, M.S. Uddin, M.M. Khin, Microencapsulated PCM thermal energy storage system, Appl. Energy 74 (2003) 195-202.
28. S. Ma, G. Song, W. Li, P. Fan, G. Tang, UV irradiation-initiated MMA polymerization to prepare microcapsules containing phase change paraffin, Sol. Energy Mater. Sol. Cells 94 (2010) 1643-1647.
29. C. Alkan, A. Sari, A. Karaipekli, O. Uzun, Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage, Sol. Energy Mater. Sol. Cells 93 (2009) 143-147.
30. L. Sánchez-Silva, J.F. Rodríguez, A. Romero, A.M. Borreguero, M. Carmona, P. Sánche, Microencapsulation of PCM with a styrene-methyl methacrylate copolymer shell by suspension-like polymerization, Chem. Eng. J. 157 (2010) 216-222.
31. http://en.wikipedia.org/wiki/Polystyrene, Visit. date: 26 May 2014.
32. X. Qiu, W. Li, G. Song, X. Chu, G. Tang, Microencapsulated n-octadecane with different methylmethacrylate-based copolymer shells as phase change materials for thermal energy storage, Energy 46 (2012) 188-199.
33. Y. Fang, S. Kuang, X. Gao, Z. Zhang, Preparation and characterization of novel nanoencapsulated phase change materials, Energy Convers. Manage. 49 (2009) 3704-3707.
34. S.J. Park, K.S. Kim, S.K. Hong, Preparation and thermal properties of polystyrene nanoparticles containing phase change materials as thermal storage medium, Polym. Korea 29 (2005) 8-13.
35. Y. Konuklu, M. Unal, H.O. Paksoy, Microencapsulation of caprylic acid with different wall materials as phase change material for thermal energy storage, Sol. Energy Mater. Sol. Cells 120 (2014) 536-542.
36. Y. Bao, W. Pan, T. Wang, Z. Wang, F. Wei, F. Xiao, Microencapsulation of fatty acid as phase change material for latent heat storage, J. Energy Eng. 137 (2011) 214-219.
37. Y. Özonur, M. Mazman, H.O. Paksoy, H. Evliya, Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material, Int. J. Energy Res. 30 (2006) 741-749.
38. Y. Konuklu, H.O. Paksoy, M. Unal, S. Konuklu, Microencapsulation of a fatty acid with poly(melamin-eurea-formaldehyde), Energy Convers. Manage. 80 (2014) 382-390.
39. 2shell as shape-stabilized thermal energy storage materials, Sol. Energy Mater. Sol. Cells 123 (2014) 183-188.
40. L. Pan, Q. Tao, S. Zhang, S. Wang, J. Zhang, S. Wang, Z. Wang, Z. Zhang, Preparation, characterization and thermal properties of microencapsulated phase change materials, Sol. Energy Mater. Sol. Cells 98 (2012) 66-70.
41. S. Alay, F. Gode, C. Alkan, Synthesis and thermal properties of poly(n-butyl acrylate)/n-hexadecane microcapsules using different cross-linkers and their application to textile fabrics, J. Appl. Polym. Sci. 120 (2011) 2821-2829.
42. W. Yu Zhang, T.D. Xia, W.J. Zhao, W.H. Yang, Effects of fabricated technology on particle size distribution and thermal properties of stearic-eicosanoic acid/polymethylmethacrylate nanocapsules, Sol. Energy Mater. Sol. Cells 120 (2014) 481-490.
43. A. Jamekhorshid, S.M. Sadrameli, M.M. Farid, A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage(TES) medium, Renew. Sustain. Energy Rev. 31 (2014) 531-542.
44. C. Liang, X. Lingling, S. Hongbo, Z. Zhibin, Microencapsulation of butyl stearate as a phase change material by interfacial polycondensation in a polyurea system, Energy Convers. Manage. 50 (2009) 723-729.
45. A.A. Aydin, In situ preparation and characterization of encapsulated high-chain fatty acid ester-based phase change material (PCM) in poly(urethane-urea) by using amino alcohol, Chem. Eng. J. 231 (2013) 477-483.
46. M. Mehrali, S.T. Latibari, M. Mehrali, T.M.I. Mahlia, H.S.C. Metselaar, M.S. Naghavi, E. Sadeghinezhad, A.R. Akhiani, Preparation and characterization of palmitic acid/graphene nanoplatelets composite with remarkable thermal conductivity as a novel shape-stabilized phase change material, Appl. Therm. Eng. 61 (2013) 633-640.
47. T.P. Teng, C.-M. Cheng, C.-P. Cheng, Performance assessment of heat storage by phase change materials containing MWCNTs and graphite, Appl. Therm. Eng. 50 (2013) 637-644.
48. A. Sari, C. Alkan, D. Kahraman Döʇüşcü, A. Bic¸er, Micro/nano-encapsulated n-heptadecane with polystyrene shell for latent heat thermal energy storage, Sol. Energy Mater. Sol. Cells 126 (2014) 42-50.