Elastic softening of β-type Ti-Nb alloys by indium (In) additions

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 39, Issue , 2014, Pages 162-174

  Calin, Mariana ^a   Helth, Arne ^a   Gutierrez Moreno, Julio J ^b   Bönisch, Matthias ^a   Brackmann, Varvara ^a   Giebeler, Lars ^a,c   Gemming, Thomas ^a   Lekka, Christina E ^b   Gebert, Annett ^a   Schnettler, Reinhard ^d   Eckert, Jürgen ^a,c  

^a IFW DRESDEN   (Germany)

^b UNIVERSITY OF IOANNINA   (Greece)

^c DRESDEN UNIVERSITY OF TECHNOLOGY   (Germany)

^d JUSTUS LIEBIG UNIVERSITY   (Germany)

Author keywords

Ab initio; Bcc phase; Biomedical material; Elastic modulus; Indium; Ti alloys

Indexed keywords

ALLOYS; ATOMS; BIOMEDICAL ENGINEERING; BONE; COMPRESSIVE STRENGTH; ELASTIC MODULI; INDIUM; NIOBIUM ALLOYS; REPAIR; STRAIN HARDENING;

AB INITIO; BCC-PHASE; BIOMEDICAL MATERIAL; BONDING CHARACTERISTICS; HARD TISSUE REPLACEMENT; STRUCTURAL CHARACTERISTICS; TI ALLOYS; ULTIMATE COMPRESSIVE STRENGTH; ELASTIC SOFTENING; TI-NB ALLOY;

TITANIUM ALLOYS; ELASTIC MODULI;

ALLOY; INDIUM; NIOBIUM; TITANIUM; BETA TYPE TITANIUM NIOBIUM ALLOY; UNCLASSIFIED DRUG; BIOMATERIAL; OXYGEN; TI-NB-XZR ALLOY; WATER;

AB INITIO CALCULATION; ARTICLE; CELL VOLUME; CHEMICAL BOND; CHEMICAL COMPOSITION; COMPRESSIVE STRENGTH; CORTICAL BONE; CRYSTAL STRUCTURE; HEAT TREATMENT; HYBRIDIZATION; PRIORITY JOURNAL; ROOM TEMPERATURE; X RAY DIFFRACTION; YOUNG MODULUS; ADDITION REACTION; BIOMECHANICS; BONE; CHEMISTRY; ELASTICITY; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; ORTHOPEDICS; PATHOLOGY; PRESSURE; PROSTHESIS; TRANSMISSION ELECTRON MICROSCOPY;

ALLOYS; BIOCOMPATIBLE MATERIALS; BIOMECHANICAL PHENOMENA; BONE AND BONES; ELASTICITY; HUMANS; INDIUM; MATERIALS TESTING; MICROSCOPY, ELECTRON, TRANSMISSION; ORTHOPEDICS; OXYGEN; PRESSURE; PROSTHESIS DESIGN; STRESS, MECHANICAL; WATER; X-RAY DIFFRACTION;

EID: 84907345290     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2014.07.010     Document Type: Article

References (51)

1. Abdel-Hady Gepreel M., Niinomi M. Biocompatibility of Ti-alloys for long-term implantation. J. Mech. Behav. Biomed. Mater. 2013, 20:407-415.
2. ASM Handbook: Alloy Phase Diagrams 1992, ASM International, Materials Park, OH, USA. H. Baker (Ed.).
3. Banerjee D., Williams J.C. Perspectives on titanium science and technology. Acta Mater. 2013, 61:844-879.
4. Banerjee S., Mukhopadhyay P. Phase Transformations - Examples from Titanium and Zirconium Alloys 2007, Elsevier, Amsterdam.
5. Blaha P., Schwarz K., Madsen G.K.H., Kuasnicka D., Luitz J. WIEN2k Augmented Plane Wave Local Orbitals Program for Calculating Crystal Properties 2001, Vienna University of Technology, Vienna.
6. Boenisch M., Calin M., Waitz T., Panigrahi A., Zehetbauer M., Gebert A., Skrotzki W., Eckert J. Thermal stability and phase transformations of martensitic Ti-Nb alloys. Sci. Technol. Adv. Mater. 2013, 14:55004/1-55004/9.
7. Boyer R.R., Welsch G., Collings E.W. Materials Properties Handbook: Titanium Alloys 1994, ASM International, Materials Park, OH.
8. Breme J., Biehl V., Helsen J. Metals and implants. Metals as Biomaterials 1998, 37-71. John Wiley & Sons Ltd., Chichester. J.A. Helsen, J. Breme (Eds.).
9. Calin M., Gebert A., Ghinea A., Gostin P.F., Abdi S., Mickel C., Eckert J. Designing biocompatible Ti-based metallic glasses for implant applications. Mater. Sci. Eng. 2013, C33:875-883.
10. Counts W.A., Friak M., Raabe D., Neugebauer J. Using ab initio calculations in designing bcc Mg-Li alloys for ultralight-weight applications. Acta Mater. 2009, 57:69-76.
11. Devaraj A., Nag S., Srinivasan R., Williams R.E.A., Banerjee S., Fraser H.L. Experimental evidence of concurrent compositional and structural instabilities leading to ω precipitation in titanium-molybdenum alloys. Acta Mater. 2012, 60:596-609.
12. Eckert J., Das J., He G., Calin M., Kim K.B. Ti-base bulk nanostructure-dendrite composites: microstructure and deformation. Mater. Sci. Eng. A 2007, 449-451:24-29.
13. Eisenbarth E., Velten D., Müller M., Thull R., Breme J. Biocompatibility of β-stabilizing elements of titanium alloys. Biomaterials 2004, 25:5705-5713.
14. Elmay W., Prima F., Gloriant T., Bolle B., Zhong Y., Patoor E., Laheurte P. Effects of thermo-mechanical process on the microstructure and mechanical properties of a fully martensitic titanium-based biomedical alloy. J. Mech. Behav. Biomed. Mater. 2013, 18:47-56.
15. Geetha M., Singh A.K., Asokamani R., Gogia A.K. Ti based biomaterials, the ultimate choice for orthopaedic implants - a review. Prog. Mater. Sci. 2009, 54(3):397-425.
16. Gostin P.F., Helth A., Voss A., Sueptitz R., Calin M., Eckert J., Gebert A. Surface treatment, corrosion behavior and apatite-forming ability of Ti-45Nb implant alloy. J. Biomed. Mater. Res. Part B: Appl. Biomater. 2013, 101:269-278.
17. Gulay L.D., Schuster J.C. Investigation of the titanium-indium system. J. Alloys Compd. 2003, 360:137-142.
18. Gutiérrez-Moreno J.J., Guo Y., Georgarakis K., Yavari A.R., Evangelakis G.A., Lekka C.H.E. The role of Sn doping in the β-type Ti-25at%Nb alloys: experiment and ab initio calculations. J. Alloys Compd. 2014, 10.1016/j.jallcom.2014.05.024, in press.
19. Hanada S., Ozaki T., Takahashi E., Watanabe S., Yoshimi K., Abumiya T. Composition dependence of Young's modulus in beta titanium binary alloys. Mater. Sci. Forum 2003, 426-432:3103-3108.
20. Hanada S., Matsumoto H., Watanabe S. Mechanical compatibility of titanium implants in hard tissues. Int. Congr. Ser. 2005, 1284:239-247.
21. Hao Y.L., Li S.J., Sun S.Y., Zheng C.Y., Hu Q.M., Yang R. Super-elastic titanium alloy with unstable plastic deformation. Appl. Phys. Lett. 2005, 87:091906/1-091906/3.
22. Helth A., Gostin P.F., Oswald S., Wendrock H., Wolff U., Hempel U., Arnold S., Calin M., Eckert J., Gebert A. Chemical nanoroughening of Ti-40Nb surfaces and its effect on human mesenchymal stromal cell response. J. Biomed. Mater. Res. Part B: Appl. Biomater. 2014, 102/1:31-41.
23. Hornez J.C., Lefèvre A., Joly D., Hildebrand H.F. Multiple parameter cytotoxicity index on dental alloys and pure metals. Biomol. Eng. 2002, 19:103-117.
24. Ikehata H., Nagasako N., Furuta T., Fukumoto A., Miwa K., Saito T. First- principles calculations for development of low elastic modulus Ti alloys. Phys. Rev. B 2004, 70:174113-174118.
25. Kent D., Wang G., Dargusch M. Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys. J. Mech. Behav. Biomed. Mater. 2013, 28:15-25.
26. Kuroda D., Niinomi M., Morinaga M., Kato Y., Yashiro T. Design and mechanical properties of new β type titanium alloys for implant materials. Mater. Sci. Eng. 1998, A243:244-249.
27. Lee B.H., Kim Y.D., Lee K.H. XPS study of bioactive graded layer in Ti-In-Nb-Ta alloy prepared by alkali and heat treatments. Biomaterials 2003, 24:2257-2266.
28. Lekka C.H.E., Bokas G.B., Almyras G.A., Papageorgiou D.G., Evangelakis G.A. Clustering, microalloying and mechanical properties in Cu/Zr-based glassy models by molecular dynamics simulations and ab-initio computations. J. Alloys Compd. 2012, 536:65-69.
29. Long M., Rack H.J. Titanium alloys in total joint replacement - a materials science perspective. Biomaterials 1998, 19:1621-1639.
30. Majumdor P., Singh S.B., Chakraborty M. The role of heat treatment on microstructure and mechanical properties of Ti-13Nb-13Zr alloy for biomedical load bearing applications. J. Mech. Behav. Biomed. Mater. 2011, 4:1132-1144.
31. Nag S., Zheng Y., Williams R.E.A., Devaraj A., Boyne A., Wang Y., Collins P.C., Viswanathan G.B., Tiley J.S., Muddle B.C., Banerjee R., Fraser H.L. Non-classical homogeneous precipitation mediated by compositional fluctuations in titanium alloys. Acta Mater. 2012, 60:6247-6256.
32. Narita K., Niinomi M., Nakai M., Hieda J., Oribe K. Development of thermo-mechanical processing for fabricatting highly durable β-type Ti-Nb-Ta-Zr rod for use in spinal fixation devices. J. Mech. Behav. Biomed. Mater. 2012, 9:207-216.
33. Ng H.P., Devaraj A., Nag S., Bettles C.J., Gibson M., Fraser H.L., Muddle B.C., Banerjee R. Phase separation and formation of omega phase in the beta matrix of a Ti-V-Cu alloy. Acta Mater. 2011, 59:2981-2991.
34. Nie L., Zhan Y., Hu T., Chen X., Wang C. β-Type Zr-Nb-Ti biomedical materials with high plasticity and low modulus for hard tissue replacements. J. Mech. Behav. Biomed. Mater. 2014, 29:1-6.
35. Niinomi M. Mechanical biocompatibilities of titanium alloys for biomedical applications. J. Mech. Behav. Biomed. Mater. 2008, 1:30-42.
36. Niinomi M., Nakai M., Hieda J. Development of new metallic alloys for biomedical applications. Acta Biomater. 2012, 8:3888-3903.
37. Perdew J.P., Burke K., Ernzerhoff M. Generalized gradient approximation made simple. Phys. Rev. Lett. 1996, 77:3865-3868.
38. Raabe D., Sander B., Friak M., Ma D., Neugebauer J. Theory-guided bottom-up design of β-titanium alloys as biomaterials based on first principles calculations: theory and experiments. Acta Mater. 2007, 55:4475-4487.
39. Rack H.J., Qazi J.I. Titanium alloys for biomedical application. Mater. Sci. Eng. 2006, C26:1269-1277.
40. Senkov O.N., Miracle D.B. Effect of the atomic size distribution on glass forming ability of amorphous metallic alloys. Mater. Res. Bull. 2001, 36:2183-2198.
41. Soderlind P., Eriksson O., Wills J.M., Boring A.M. Theory of elastic constants of cubic transition metals and alloys. Phys. Rev. B 1993, B48:5844-5851.
42. Song Y., Xu D.S., Yang R., Li D., Wu W.T., Guo Z.X. Theoretical study of the effects of alloying elements on the strength and modulus of β-type bio-titanium alloys. Mater. Sci. Eng. 1999, A260:269-274.
43. Takeuchi A., Inoue A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Mater. Trans. Jpn. Inst. Met. 2005, 46:2817-2829.
44. Tsai H. Elastic properties, damping capacity and shape memory alloys. Smithells Metals Reference Book 2004, 1-45. Elsevier Ltd. Eighth Edition. W. Gale, T. Totemeier (Eds.).
45. Wang Q.Y., Wang Y.B., Lin J.P., Zheng Y.F. Development and properties of Ti-In binary alloys as dental biomaterials. Mater. Sci. Eng. 2013, C33:1601-1606.
46. Young R.A. The Rietveld Method 1993, Oxford University Press, Oxford, UK.
47. Xu W., Kim K.B., Das J., Calin M., Eckert J. Phase stability and its effect on the deformation behavior of Ti-Nb-Ta-In/Cr β alloys. Scr. Mater. 2006, 54:1943-1948.
48. Zhan Y., Li C., Jiang W. β-type Ti-10Mo-1.25Si-xZr biomaterials for applications in hard tissue replacements. Mater. Sci. Eng. C 2012, 32:1664-1668.
49. Zhang D.C., Mao Y.F., Li Y.L., Li J.J., Yuan M., Lin J.G. Effect of ternary alloying elements on microstructure and superelastictity of Ti-Nb alloys. Mater. Sci. Eng. A 2013, 559:706-710.
50. Zhao D., Chang K., Ebel T., Qian M., Willumeit R., Yan M., Pyczak F. Microstructure and mechanical behavior of metal injection molded Ti-Nb binary alloys as biomedical material. J. Mech. Behav. Biomed. Mater. 2013, 28:171-182.
51. Zheng N., Qu R.T., Pauly S., Calin M., Gemming T., Zhang Z.F., Eckert J. Design of ductile bulk metallic glasses by adding "soft" atoms. J. Appl. Phys. Lett. 2012, 100:141901-141904.