Multivariate optimization of dual-bed solid phase extraction for preconcentration of Ag, Al, As and Cr in gasoline prior to inductively coupled plasma optical emission spectrometric determination

Fuel

Volumn 139, Issue , 2015, Pages 285-291

  Nomngongo, Philiswa N ^a   Ngila, J Catherine ^a  

^a UNIVERSITY OF JOHANNESBURG   (South Africa)

Author keywords

Dual bed resin; Factorial design; Gasoline; Metal ions; Separation and preconcentration

Indexed keywords

GASOLINE; INDUCTIVELY COUPLED PLASMA; LIGHT EMISSION; METAL IONS; METAL RECOVERY; METALS; OPTICAL EMISSION SPECTROSCOPY; PHASE SEPARATION; PLASMA DIAGNOSTICS; PLASMA TORCHES; RESINS;

FACTORIAL DESIGN; INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC; INDUCTIVELY COUPLED PLASMA-OPTICAL EMISSION SPECTROSCOPY; MICROWAVE ASSISTED DIGESTION; MULTIVARIATE OPTIMIZATION; PRE-CONCENTRATION; RELATIVE STANDARD DEVIATIONS; STANDARD ADDITION METHOD;

EXTRACTION;

EID: 84907164557     PISSN: 00162361     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuel.2014.08.046     Document Type: Article

References (37)

1. R.J. Cassella, D.M. Brum, C.F. Lima, L.F.S. Caldas, and C.E.R. de Paula Multivariate optimization of the determination of zinc in diesel oil employing a novel extraction strategy based on emulsion breaking Anal Chim Acta 690 2011 79 85
2. G.L. Donati, R.S. Amais, D. Schiavo, and J.A. Nobrega Determination of Cr, Ni, Pb and V in gasoline and ethanol fuel by microwave plasma optical emission spectrometry J Anal At Spectrom 28 2013 755 759
3. T.D. Saint'Pierre, L.F. Dias, S.M. Maia, and A.J. Curtius Determination of Cd, Cu, Fe, Pb and Tl in gasoline as emulsion by electrothermal vaporization inductively coupled plasma mass spectrometry with analyte addition and isotope dilution calibration techniques Spectrochim Acta Part B 59 2004 551 558
4. J.K.C. Sousa, A.N.D.S. Dantas, A.L.B. Marques, and G.S. Lopes Experimental design applied to the development of a copper direct determination method in gasoline samples by graphite furnace atomic absorption spectrometry Fuel Process Technol 89 2008 1180 1185
5. G.E. Collins, R.E. Morris, J.-F. Wei, M. Smith, M.H. Hammond, and V. Michelet Spectrophotometric detection of trace copper levels in jet fuel Energy Fuels 16 2002 1054 1058
6. F.W. Sant'Ana, R.E. Santelli, A.R. Cassella, and R.J. Cassella Optimization of an open-focused microwave oven digestion procedure for determination of metals in diesel oil by inductively coupled plasma optical emission spectrometry J Hazard Mater 149 2007 67 74
7. E.S. Chaves, M.T.C. de Loos-Vollebregt, A.J. Curtius, and F. Vanhaecke Determination of trace elements in biodiesel and vegetable oil by inductively coupled plasma optical emission spectrometry following alcohol dilution Spectrochim Acta Part B 66 2011 733 739
8. R.M. de Souza, A.L.S. Meliande, C.L.P. da Silveira, and R.Q. Aucélio Determination of Mo, Zn, Cd, Ti, Ni, V, Fe, Mn, Cr and Co in crude oil using inductively coupled plasma optical emission spectrometry and sample introduction as detergentless microemulsions Microchem J 82 2006 137 141
9. R.M. Souza, C.L.P. da Silveira, and R.Q. Aucelio Determination of refractory elements in used lubricating oil by ICP-OES employing emulsified sample introduction and calibration with inorganic standards Anal Sci 20 2004 351 355
10. M. Bettinelli, S. Spezia, U. Baroni, and G. Bizzarri Determination of trace elements in fuel oils by inductively coupled plasma mass spectrometry after acid mineralization of the sample in a microwave oven J Anal At Spectrom 10 1995 555 560
11. L.S.G. Teixeira, R.B.S. Rocha, E.V. Sobrinho, P.R.B. Guimarães, L.A.M. Pontes, and J.S.R. Teixeira Simultaneous determination of copper and iron in automotive gasoline by X-ray fluorescence after pre-concentration on cellulose paper Talanta 72 2007 1073 1076
12. M.D.G.A. Korn, D.S.S. dos Santos, B. Welz, M.G.R. Vale, A.P. Teixeira, and D.D.C. Lima Atomic spectrometric methods for the determination of metals and metalloids in automotive fuels - a review Talanta 73 2007 1 11
13. E.J. Ekanem, J.A. Lori, and S.A. Thomas The determination of wear metals in used lubricating oils by flame atomic absorption spectrometry using sulphanilic acid as ashing agent Talanta 44 1997 2103 2108
14. J.S.F. Pereira, D.P. Moraes, F.G. Antes, L.O. Diehl, M.F.P. Santos, and R.C.L. Guimarães Determination of metals and metalloids in light and heavy crude oil by ICP-MS after digestion by microwave-induced combustion Microchem J 96 2010 4 11
15. D.S.S. Santos, M.G.A. Korn, M.A.B. Guida, G.L. dos Santos, V.A. Lemos, and L.S.G. Teixeira Determination of copper, iron, lead and zinc in gasoline by sequential multi-element flame atomic absorption spectrometry after solid phase extraction J Brazil Chem Soc 22 2011 552 557
16. P.N. Nomngongo, J.C. Ngila, J.N. Kamau, T.A.M. Msagati, and B. Moodley Preconcentration of molybdenum, antimony and vanadium in gasoline samples using Dowex 1-x8 resin and their determination with inductively coupled plasma-optical emission spectrometry Talanta 2013 110 2013 153 159
17. T. Wang, X. Jia, and J. Wu Direct determination of metals in organics by inductively coupled plasma atomic emission spectrometry in aqueous matrices J Pharm Biomed Anal 33 2003 639 646
18. M.A. Aguirre, N. Kovachev, M. Hidalgo, and A. Canals Analysis of biodiesel and oil samples by on-line calibration using a Flow Blurring[registered sign] multinebulizer in ICP OES without oxygen addition J Anal At Spectrom 27 2012 2102 2110
19. P.S. Roldan, I.L. Alcântara, C.C.F. Padilha, and P.M. Padilha Determination of copper, iron, nickel and zinc in gasoline by FAAS after sorption and preconcentration on silica modified with 2-aminotiazole groups Fuel 84 2005 305 309
20. L.A. Escudero, S. Cerutti, R.A. Olsina, J.A. Salonia, and J.A. Gasquez Factorial design optimization of experimental variables in the on-line separation/preconcentration of copper in water samples using solid phase extraction and ICP-OES determination J Hazard Mater 183 2010 218 223
21. M.A. Bezerra, R.E. Santelli, E.P. Oliveira, L.S. Villar, and L.A. Escaleira Response surface methodology (RSM) as a tool for optimization in analytical chemistry Talanta 76 2008 965 977
22. C.R.T. Tarley, G. Silveira, W.N.L. dos Santos, G.D. Matos, E.G.P. da Silva, and M.A. Bezerra Chemometric tools in electroanalytical chemistry: Methods for optimization based on factorial design and response surface methodology Microchem J 92 2009 58 67
23. A. de Jesus, A.V. Zmozinski, I.C.F. Damin, M.M. Silva, and M.G.R. Vale Determination of arsenic and cadmium in crude oil by direct sampling graphite furnace atomic absorption spectrometry Spectrochimica Acta Part B 71-72 2012 86 91
24. P.N. Nomngongo, J.C. Ngila, T.A.M. Msagati, and B. Moodley Chemometric optimization of hollow fiber-liquid phase microextraction for preconcentration of trace elements in diesel and gasoline prior to their ICP-OES determination Microchem J 114 2014 141 147
25. P.N. Nomngongo, and J.C. Ngila Determination of trace Cd, Cu, Fe, Pb and Zn in diesel and gasoline by inductively coupled plasma mass spectrometry after sample clean up with hollow fiber solid phase microextraction system Spectrochim Acta Part B 98 2014 54 59
26. E. Kendüzler, Ö. YalçInkaya, S. Baytak, and A.R. Türker Application of full factorial design for the preconcentration of chromium by solid phase extraction with Amberlyst 36 resin Microchim Acta 2008 160 2008 389 395
27. J. Gabrielsson, N.-O. Lindberg, and T. Lundstedt Multivariate methods in pharmaceutical applications J Chemometrics 2002 16 2002 141 160
28. Z. Kowalewska, A. Ruszczyńska, and E. Bulska Cu determination in crude oil distillation products by atomic absorption and inductively coupled plasma mass spectrometry after analyte transfer to aqueous solution Spectrochimica Acta Part B 60 2005 351 359
29. S.L.C. Ferreira, A.S. Queiroz, M.S. Fernandes, and H.C. dos Santos Application of factorial designs and Doehlert matrix in optimization of experimental variables associated with the preconcentration and determination of vanadium and copper in seawater by inductively coupled plasma optical emission spectrometry Spectrochim Acta B 57 2002 1939 1950
30. I.I. Stewart, and J.W. Olesik Steady state acid effects in ICP-MS J Anal At Spectrom 13 1998 1313 1320
31. E. Becker, R.T. Rampazzo, M.B. Dessuy, M.G.R. Vale, M.M. da Silva, and B. Welz Direct determination of arsenic in petroleum derivatives by graphite furnace atomic absorption spectrometry: a comparison between filter and platform atomizers Spectrochim Acta Part B 2011 66 2011 345 351
32. G. Brandão, R. de Campos, A. Luna, E. de Castro, and H. de Jesus Determination of arsenic in diesel, gasoline and naphtha by graphite furnace atomic absorption spectrometry using microemulsion medium for sample stabilization Anal Bioanal Chem 385 2006 1562 1569
33. E.G. Vieira, I.V. Soares, Dias Filho. Nl, N.C. Da Silva, E.F. Garcia, and A.C. Bastos Preconcentration and determination of metal ions from fuel ethanol with a new 2,2′-dipyridylamine bonded silica J Colloid Interf Sci 2013 391 2013 116 124
34. A. de Oliveira, M. de Moraes, J. Neto, and E. Lima Simultaneous determination of Al, As, Cu, Fe, Mn, and Ni in fuel ethanol by GFAAS At Spectrosc 23 2002 39 43
35. R.J. Cassella, D.M. Brum, N.F. Robaina, A.A. Rocha, and C.F. Lima Extraction induced by emulsion breaking for metals determination in diesel oil by ICP-MS J Anal At Spectrom 27 2012 364 370
36. J.M. Trindade, A.L. Marques, G.S. Lopes, E.P. Marques, and J. Zhang Arsenic determination in gasoline by hydride generation atomic absorption spectroscopy combined with a factorial experimental design approach Fuel 85 2006 2155 2161
37. T.D. Saint'Pierre, V.L.A. Frescura, and A.J. Curtius The development of a method for the determination of trace elements in fuel alcohol by ETV-ICP-MS using isotope dilution calibration Talanta 68 2006 57 962