Experimental design applied to the development of a copper direct determination method in gasoline samples by graphite furnace atomic absorption spectrometry

Fuel Processing Technology

Volumn 89, Issue 11, 2008, Pages 1180-1185

  Sousa, Janyeid Karla Castro ^b   Dantas, Allan Nilson de Sousa ^a   Marques, Aldaléa Lopes Brandes ^b   Lopes, Gisele Simone ^a  

^a FEDERAL UNIVERSITY OF CEARÁ   (Brazil)

^b FEDERAL UNIVERSITY OF MARANHÃO   (Brazil)

Author keywords

Atomic absorption spectrometry; Copper; Experimental design; Gasoline

Indexed keywords

ABSORPTION; ATOMIC ABSORPTION SPECTROMETRY; ATOMIC PHYSICS; ATOMIC SPECTROSCOPY; ATOMIZATION; ATOMS; CARBON; CHEMICAL REACTIONS; COPPER; DESIGN; EXPERIMENTS; FURNACES; GASOLINE; GRAPHITE; HYDRAULICS; LIQUID FUELS; PETROLEUM PRODUCTS; PROCESS ENGINEERING; PYROLYSIS; SPECTROMETERS; SPECTROMETRY; STATISTICS;

ATOMIC ABSORPTIONS; ATOMIZATION TEMPERATURES; DETECTION LIMITS; DIRECT DETERMINATIONS; EVALUATING; EXPERIMENTAL DESIGN; EXPERIMENTAL DESIGNS; FACTORIAL DESIGNS; FUEL SAMPLES; GASOLINE SAMPLES; GRAPHITE FURNACES; OPTIMAL TEMPERATURES; PYROLYSIS TIMES; QUANTIFICATION LIMITS; RESPONSE SURFACES; SAMPLE VOLUMES;

ABSORPTION SPECTROSCOPY;

EID: 54149115874     PISSN: 03783820     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.fuproc.2008.05.012     Document Type: Article

References (29)

1. Saint 'Pierre T.D., Dias L.F., Maia M.S., and Curtius J.A. Determination of Cd, Cu, Fe, Pb and Tl in gasoline as emulsion by electrothermal vaporization inductively coupled plasma mass spectrometry with analyte addition and isotope dilution calibration techniques. Spectrochim. Acta, Part B 59 (2004) 551-558
2. Pande G.S., and Hardy D.R. Comparison of the effects of storage in the presence of copper using laboratory vs field conditions on jet fuel thermal stability as measured by the gravimetric JFTOT. Energy Fuels 11 (1997) 1019-1025
3. Trindade J.M., Marques A.L.B., Lopes G.S., Marques E.P., and Zang J. Arsenic determination in gasoline by hydride generation atomic absorption spectroscopy combined with a factorial experimental design approach. Fuel 85 (2006) 2155-2161
4. Teixeira L.S.G., Souza J.C., dos Santos H.C., Pontes L.A.M., Guimarães P.R.B., Sobrinho E.V., and Vianna R.F. The influence of Cu, Fé, Ni, Pb and Zn on gum formation in the Brazilian automotive gasoline. Fuel process. technol. 88 (2007) 73-76
5. Guidroz J.M., and Sneddon J. Fate of vanadium determined by nitrous oxide-acetylene flame atomic absorption spectrometry in unburned and burned Venezuelan crude oil. Microchem. J. 73 (2002) 363-366
6. Ruiz A.L., Canais A., and Hernandes V.J. Effect of surfactants in flame atomic absorption spectrometry with pneumatic nebulization: influence of hydrophobic chain length. J. Anal. At. Spectrom. 08 (1993) 109-113
7. Platteau O., and Carrillo M. Determination of metallic elements in crude oil-water emulsions by flame AAS. Fuel 74 (1995) 761-767
8. Baena J.R., Gallego M., and Valcarcel M. Speciation of inorganic lead and trialkyllead compounds by flame atomic absorption spectrometry following continuous selective preconcentration from aqueous solutions. Spectrochim. Acta, Part B 54 (1999) 1869-1879
9. Kumar S.J., and Gangadharan D.S. Determination of trace elements in naphtha by inductively coupled plasma mass spectrometry using water-in-oil emulsions. J. Anal. At. Spectrom. 14 (1999) 967-971
10. Meeravali N.N., and Kumar S.J. The utility of a W-Ir permanent chemical modifier for the determination of Ni and V in emulsified fuel oils and naphtha by transverse heated electrothermal atomic absorption spectrometer. J. Anal. At. Spectrom. 16 (2001) 527-532
11. Fabec J.L., and Ruschak M.L. Determination of nickel, vanadium, and sulfur in crudes and heavy crude fractions by inductively coupled argon plasma/atomic emission spectrometry and flame atomic absorption spectrometry. Anal. Chem. 57 (1985) 1853-1864
12. Wondimu T., Goessler W., and Irgolic K.J. Microwave digestion of "residual fuel oil" (NIST SRM 1634b) for the determination of trace elements by inductively coupled plasma-mass spectrometry. Fresenius J. Anal. Chem. 367 (2000) 35-42
13. Kowalewska Z., Bulska E., and Hulanicki A. Organic palladium and palladium-magnesium chemical modifiers in direct determination of lead in fractions from distillation of crude oil by electrothermal atomic absorption analysis. Spectrochim. Acta, Part B 54 (1999) 835-843
14. Aucelio R.Q., and Curtius A.J. Evaluation of electrothermal atomic absorption spectrometry for trace determination of Sb, As and Se in gasoline and kerosene using microemulsion sample introduction and two approaches for chemical modification. J. Anal. At. Spetrom. 17 (2002) 242-247
15. Reyes M.N.M., and Campos R.C. Graphite furnace atomic absorption spectrometric determination of Ni and Pb in diesel and gasoline samples stabilized as microemulsion using conventional and permanent modifiers. Spectrochim. Acta, Part B 60 (2005) 615-624
16. Saint'Pierre T.D., Maranhão T.A., Frescura V.L.A., and Curtius A.J. The development of a method for the determination of trace elements in fuel alcohol by electrothermal vaporization-inductively coupled plasma mass spectrometry using external calibration. Spectrochim. Acta, Part B 60 (2005) 605-613
17. Esbensen K.H. Multivariate Data Analysis - in practice. 5th edition (2004), Camo, Oslo, Norway
18. Pereira-Filho E.R., Poppi R.J., and Arruda M.A.Z. Emprego de planejamento fatorial para a otimização das temperaturas de pirólise e atomização de Al, Cd, Mo e Pb por ETAAS. Quim. Nova 25 (2002) 246-253
19. Amorim F.R., Bof C., Franco M.B., Silva J.B.B., and Nascentes C.C. Comparative study of conventional and multivariate methods for aluminium determination in soft drinks by graphite furnace atomic absorption spectrometry. Microchem. J. 82 (2006) 168-173
20. Silva J.B.B., Silva M.A.M., Curtius A.J., and Welz B. Determination of Ag, Pb and Sn in aqua regia extracts from sediments by electrothermal atomic absorption spectrometry using Ru as a permanent modifier. J. Anal. At. Spectrom. 14 (1999) 1737-1742
21. Campos R.C., Santos H.R., and Grinberg P. Determination of copper, iron, lead and nickel in gasoline by electrothermal atomic absorption spectrometry using three component solutions. Spectrochim. Acta, Part B 57 (2002) 15-28
22. Agência Nacional do Petróleo (ANP), Portaria No 126 de 08/08/2002, publicada no Diário Oficial da União (DOU) de 09/08/2002.
23. Saint'Pierre T.D., Dias L.F., Pozebon D., Aucélio R.Q., Curtius A.J., and Welz B. Determination of Cu, Mn, Ni and Sn in gasoline by electrothermal vaporization inductively coupled plasma mass spectrometry, and emulsion sample introduction. Spectrochim. Acta, Part B 57 (2002) 1991-2001
24. Vale M.G.R., Silva M.M., Welz B., and Lima E.C. Determination of cadmium, copper and lead in mineral coal using solid sampling graphite furnace atomic absorption spectrometry. Spectrochim. Acta, Part B 56 (2001) 1859-1873
25. Aucélio R.Q., Curtius A.J., and Welz B. Sequential determination of Sb and Sn in used lubricating oil by electrothermal atomic absorption spectrometry using Ru as a permanent modifier and microemulsion sample introduction. J. Anal. At. Spectrom. 15 (2000) 1389-1393
26. Saint'Pierre T.D., Aucélio R.Q., and Curtius A.J. Trace elemental determination in alcohol automotive fuel by electrothermal atomic absorption spectrometry. Microchem. J. 75 (2003) 59-67
27. Olesello S. How to present an analytical method. Food Chem. 58 (1997) 145-147
28. Welz B., and Sperling M. Atomic Absorption Spectrometry. 3rd ed. (1999), Wiley-VCH, Weinheim
29. Teixeira L.S.G., Bezerra M.A., Lemos V.A., dos Santos H.C., de Jesus D.S., and Costa A.C.S. Determination of copper, iron, nickel and zinc in ethanol fuel by flame atomic spectrometry using on-line preconcentration system. Sep. Sci. Technol. 40 (2005) 2555-2565