Development of the particle interface bonding in thermal spray coatings for expanding high performance applications

Proceedings of the International Thermal Spray Conference

Volumn , Issue , 2012, Pages 47-57

  Li, Chang Jiu ^a   Yang, Guan Jun ^a   Li, Cheng Xin ^a  

^a XI'AN JIAOTONG UNIVERSITY   (China)

Author keywords

[No Author keywords available]

Indexed keywords

ATMOSPHERIC TEMPERATURE; CERAMIC COATINGS; CERAMIC MATERIALS; DEPOSITS; DROPS; GRAIN GROWTH; HYDROPHOBICITY; LAMELLAR STRUCTURES; MOLTEN MATERIALS; PLASMA SPRAYING; POROUS MATERIALS; SPRAYED COATINGS; SURFACE CHEMISTRY; SURFACE PROPERTIES; THICKNESS MEASUREMENT;

CRYSTALLINE STRUCTURE; DEPOSITION CONDITIONS; HIGH PERFORMANCE APPLICATIONS; MICROSTRUCTURES AND PROPERTIES; SUPER-HYDROPHOBIC SURFACES; THERMAL SPRAY COATINGS; THERMAL SPRAY PROCESS; THERMALLY SPRAYED COATINGS;

BONDING;

EID: 84906973275     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (52)

1. J. Bisson, C. Moreau, M. Dorfman, C. Dambra, J. Mallon, Influence of Hydrogen on the Microstructure of Plasma-Sprayed Yttria-Stabilized Zirconia Coatings. J. Therm. Spray Technol., 2005, 14, p 85-90
2. C.-J. Li, A.Ohmori, Relationship between the Structure and Properties of Thermally Sprayed Deposits. J. Thermal Spray Technol., 2002, 11, p 365-374
3. R. McPherson, A Model for the Thermal Conductivity of Plasma-Sprayed Ceramic Coatings. Thin Solid Films, 1984, 112, p 89-95
4. Y. Li, C.-J. Li, G.-J. Yang, C.-X. Li, Relation between Microstructure and Thermal Conductivity of Plasma-Sprayed 8YSZ Coating, Int. J. Modern Phy. B, 2010, 24(15-16), p 3017-3022
5. 1-xSrxMnO3 Coating for the Cathode of SOFCs, Surf. Coat. Technol., 2005, 198, p 278-282
6. Y.Z. Xing, C.-J. Li, Q. Zhang, C.-X. Li, G.-J. Yang, Influence of Microstructure on the Ionic Conductivity of Plasma-Sprayed Yttria-Stabilized Zirconia Deposits, J. Am. Ceram. Soc., 2008, 91 (12), p 3931-3936
7. R. McPherson, B.V. Shafer, Interlamellar Contact within Plasma-Sprayed Coatings. Thin Solid Films, 1982, 97, p 201-204
8. C.-J. Li, A. Ohmori, R.McPherson, The Relationship between Microstructure and Young's Modulus of Thermally Sprayed Ceramic Coatings, J. Mater. Sci., 1997, 32, p 997-1004
9. Y.-Z. Xing, C.-J. Li, C.-X. Li, G.-J. Yang, Relationship between the Interlamellar Bonding and Properties of Plasma-sprayed Y2O3-ZrO2 Coatings, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Materials Park, OH, USA, 2009 CD-ROM, pp.939-944
10. S. Hao, C.-J. Li, G.-J. Yang, Influence of Deposition Temperature on the Microstructures and Properties of Plasma-Sprayed Al2O3 Coatings, J. Thermal Spray Technol., 2011, 20, p 160-169
11. C.C. Berndt, R. McPherson, A Fracture Mechanics Approach to the Adhesion of Flame and Plasma Sprayed Coatings. Proc. 9th Int. Thermal Spraying Conf., Hague, 1980, Nederland Inst. Voor Lastetechnik, 1980, 310-316
12. C.-J. Li, W.-Z.Wang, Y. He, Dependency of Fracture Toughness of Plasma-Spray AL2O3 Coatings on the Microstructure, J. Thermal Spray Technol, 2004, 13, p 425-431
13. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings. John Wiley & Sons Ltd., Chichester, England, 1995.
14. J.R. Davis, Handbook of Thermal Spray Technology, ASM International, Materials Park, Ohio, 2004.
15. N.P. Padture, M. Gell, and E.H. Jordan, Thermal Barrier Coatings for Gas-Turbine Engine Applications, Sci., 2002, 12, p 280-284
16. C.-J. Li, X.-J. Ning and C.-X. Li, Effect of Densification Process on the Properties of Plasma-Sprayed YSZ Electrolyte Coatings for Solid Oxide Fuel Cell, Surf. Coat. Technol., 2005, 190, p 60-64
17. C.-J. Li, Y. Li, G.-J. Yang, C.-X. Li, A Novel Plasma-Sprayed Durable Thermal Barrier Coating with the Well-Bonded YSZ Interlayer between Porous YSZ and Bond Coat, J. Thermal Spray Technol., 2012, 21, in press
18. Y.Z. Xing, Y. Li, C.-J. Li, C.X. Li, G.J.Yang, Influence of Substrate Temperature on Microcracks Formation in Plasma-Sprayed Yttria-Stabilized Zirconia Splats, Key Eng. Mater., 2008, 373-374, p 69-72
19. S. Hao, Effect of Deposition Temperature on the Lamellar Bonding and Propertesof APS Al2O3 Coatings, Thesis, 2010, Xi'an Jiaotong University (In Chinese)
20. Y.-Z. Xing, C.-J. Li, C.-X. Li, G.-J. Yang, Influence of Through-Lamella Grain Growth on Ionic Conductivity of Plasma-Sprayed Yttria Stabilized Zirconia as an Electrolyte in Solid Oxide Fuel Cells, J. Power Sources, 2008, 176, p 31-38
21. Y.Arata, A.Ohmori, C.-J. Li, Study on the Structure of Plasma Sprayed Ceramic Coating by Using Copper Electroplating. Proceedings of International Symposium on Advanced Thermal Spraying Technology and Allied Coatings (ATTAC'88), Japan High Temperature Society, Osaka, 1988, 205-210
22. A.Ohmori and C.-J. Li, Quantitative Characterization of the Structure of Plasma Sprayed Al2O3 Coating by Using Copper Electroplating. Thin Solid Films, 1991, 201, p 241-252
23. A. Ohmori, C.-J. Li, Y. Arata, Influence of Plasma Spray Conditions on the Structure of A1203 Coatings. Trans. Jpn. Weld. Res. Inst. 1990, 19, p 259-270.
24. Y. Arata, A. Ohmori, C.-J. Li, Characteristics of Metal Electroplating to Plasma Sprayed Ceramic Coatings. Trans. Jpn. Weld. Res. Inst., 1987, 16, p 259-265
25. C.-J. Li, W.-Z.Wang, Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Alumina Coating by Visualization of Voids Distribution. Mater. Sci. Eng. A, 2004, A386, p 10-19
26. W.-Z. Wang, C.-J. Li, K. Sonoya, Study of Lamellar Microstructure of Plasma-Sprayed ZrO2-8wt.%Y2O3 Coatings, Tagungsband Conference Proceedings (2005 Int. Thermal Spray Conf.), E. Lugscheider, Ed., May 2-5, Bussel, Switzerland, German Welding Research Institute, 2005, Germany, pp.1506-1510
27. C.-J. Li, A.Ohmori, Y.Arata, Effect of Spray Methods on the Lamellar Structure of Al2O3 Coatings. Thermal Spray, Current Status and Future Trends, A. Ohmori, Ed., Japan High Temperature Society, 1995, 501-506
28. C.-J. Li, A. Ohmori, The Lamellar Structure of a Detonation Gun Sprayed Al2O3 Coating. Surf. Coat. Technol., 1996, 82, p 254-258
29. A. Ohmori, C.-J. Li and Y. Arata, Structure of Plasma-Sprayed Alumina Coatings Revealed by Using Copper Electroplating, Proceeding of 4th National Thermal Spray Conference, Pittsburgh USA, 12-16 May 1991, ASM International, 1992, 105-113
30. W.Z. Wang, Quantitative Characterization of Lamellar Microstructure of Plasma-Sprayed Coatings and Relationship between Lamellar Microstructure and Properties of Coatings, Ph.D Thesis, 2004, Xi'an Jiaotong Unicersity (In Chinese).
31. R. McPherson and P. Cheang, Microstructural Analysis of Ni-Al Plasma-Sprayed Coating, Proc. 12th ITSC, British Welding Society, 1989, P17-1
32. S. Boire-Lavigne, C. Moreau and R.G. Saint-Jacques, The Relationship between the Microstructure and Thermal Diffusivity of Plasma-Sprayed Tungsten Coating, J. Thermal Spray Technol., 1995, 4(3), p 261-267
33. S. Kuroda, and S. Kitahara, Effect of Spray Conditions on the Pore Structure and Quenching Stress in Plasma Sprayed Coating, Thermal Spray, Current Status and Future Trends, A. Ohmori, Ed., Japan High Temperature Society, 1995, 489-494
34. C. Takahashi, and T. Senda, On the Pore Structure of Plasma Sprayed Films, Thermal Spray, Current Status and Future Trends, A. Ohmori, Ed., Japan High Temperature Society, 1995, 921-926
35. th Int. Thermal Spray Conf., Hague, 19-23 May 1980, Nederlands Institut voor Lastechniek, 1980, 143-154.
36. A. Vardelle, M. Vadelle, R. McPherson, P. Fauchais, Study of the Influence of Particle Temperature and Velocity Distribution within a Plasma Jet Coating Formation. Proc. 9th Int. Thermal Spraying Conf., Hague, 1980, Nederland Inst. Voor Lastetechnik, 1980, 55-161
37. M. Vardelle, A. Vardelle, P. Fauchais, Study of Trajectories and Temperatures of Powders in a D.C. Plasma Jet -Correlation with Alumina Sprayed Coatings. Proc. 10th Int. Thermal Spraying Conf., Essen, May 1983, German Welding Society, 1983, 88-92
38. H.-D. Steffens, K.-H. Busse, M. Schneider, Spray Particle Behavior in a Low Pressure Plasma Jet, Advances in Thermal Spraying, Proc. 11th Inter. Thermal Spray Conf., Canada, Welding Institute of Canada, 1986, 49-59
39. R. Kawase, H. Nakajima, K. Maehara, M. Korama, H. Abe, Influence of Spray Parameters on Detonation Coating Properties, Proceedings of International Symposium on Advanced Thermal Spraying Technology and Allied Coatings (ATTAC'88), Japan High Temperature Society, Osaka, 1988, 55-60
40. C.-J. Li, Y.-Z. Xing, C.-X. Li, G.-J. Yang, An Approach to Control the Interlamellar Bonding of Plasma-Sprayed Y2O3-ZrO2 Coatings through Deposition Temperature, Thermal Spray 2009: Expanding Thermal Spray Performance to New Markets and Applications, B.R. Marple, M.M. Hyland, Y.-C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Ed., ASM International, Materials Park, OH, USA, 2009 CD-ROM, pp.957-962
41. Li et al., to be published
42. E.-J. Yang, G.-J. Yang, X.-T. Luo, C.-J. Li, M. Takahashi, S. Kuroda, Influence of Substrate Temperature on the Crystalline Structure Formation in Plasma-Sprayed Al2O3 Splats, Proceedings of 2012 ITSC, ASM International, 2012, to be published
43. E.-J. Yang, G.-J. Yang, X.-T. Luo, C.-J. Li, M. Takahashi, Epitaxial Grain Growth during Splat Cooling of Alumina Droplets Produced by Atmospheric Plasma Spraying, Proceedings of 2012 ITSC, ASM International, 2012.
44. X.-M. Wang, C.-J. Li, C.-X. Li, G.-J. Yang, Microstructure and Electrochemical Behavior of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying for Solid Oxide Fuel Cell Application, J. Thermal Spray Technol., 2010, 19(1-2), p 311-316
45. E. Ivers-Tiffe, A. Weber, D. Herbstritt, Materials and Technologies for SOFC-Components, J. Europ. Ceram. Soc., 2001, 21, p 1805-1811
46. C.-X. Li, Z.-H. Song,Y. Zhang, C.-J. Li, G.-J. Yang, Enhancement of SOFC Cathode Performance Through Structured Electrolyte/Cathode Interface with ScSZ Convex Particle of High Electrical Conductivity, presented at 18th International Conference on Solid State Ionics, Sept. 4-8, 2011, Warsaw, Poland
47. B. Bhushan, Y. Chae Jung, Natural and Biomimetic Artificial Surfaces for Superhydrophobicity, Self-Cleaning, Low Adhesion, and Drag Reduction, Prog. Mater. Sci., 2011, 56, p 1-108
48. B. Chen, C.-J. Li, T. Guo, G.-J. Yang, Structured Surface by Surface-Molten Mo Particles Distributing for Super-Hydrophobicity, to be published
49. B. Chen, C.-J. Li, G.-J. Yang, C.-X. Li, Preparation and Characterization of Porous Molybdenum by Low Velocity Flame Spraying of Surface-Molten Particle Deposition, Proceedings of 2012 ITSC, ASM International, 2012, to be published
50. J. Zou, C.-J. Li, H.-B. Huo, B. Chen, C.-X. Li, G.-J. Yang, Formation of Abradable Ceramic Coatings Through Deposition of Semi-Molten Ceramic Particles by Flame Spray, Proceedings of 2012 ITSC, ASM International, 2012, to be published
51. J.-T. Yao, C.-J. Li, G.-J. Yang, C.-X. Li, Fabrication of Porous Stainless Steel Through Semi-Molten Spray Particles Deposition by Flame Spraying, Proceedings of 2012 ITSC, ASM International, 2012, to be published
52. H.-B. Huo, C.-J. Li, G.-J. Yang, C.-X. Li, Fabrication of Porous YSZ for High Temperature Abradable Coating Application by Flame Spraying, Proceedings of 2012 ITSC, ASM International, 2012, to be published