Friction and wear properties modification of Ti-6Al-4V alloy surfaces by implantation of multi-charged carbon ions

Wear

Volumn 319, Issue 1-2, 2014, Pages 19-26

  Pierret, C ^a,b   Maunoury, L ^c   Monnet, I ^a   Bouffard, S ^a   Benyagoub, A ^a   Grygiel, C ^a   Busardo, D ^b   Muller, D ^d   Hoche D ^e  

^a UNIVERSITÉ DE CAEN   (France)

^b Quertech Ingénierie ^*  (France)

^c CENTRE DE CALCUL DE L INSTITUT NATIONAL DE PHYSIQUE NUCLEAIRE ET DE PHYSIQUE DES PARTICULES   (France)

^d UNIVERSITÉ DE STRASBOURG   (France)

^e INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

Carbiding; Carbon depth profile; Ion implantation; Titanium alloys

Indexed keywords

CARBON; FRICTION; ION IMPLANTATION; WEAR OF MATERIALS; TITANIUM ALLOYS;

CARBIDING; FRICTION AND WEAR PROPERTIES; FRICTION COEFFICIENTS; IMPLANTATION PROFILES; IMPLANTATION TECHNIQUE; MICROSTRUCTURAL MODIFICATION; NEAR SURFACE REGIONS; PROCESSING TECHNOLOGIES; CARBON IONS; TI-6AL-4V ALLOY;

TITANIUM ALLOYS; ION IMPLANTATION;

EID: 84905385724     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2014.07.001     Document Type: Article

References (38)

1. Liu X.Y., Chu P.K., Ding C.X. Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater. Sci. Eng. R 2004, 47:49-121.
2. Sioshansi P., Oliver R.W., Matthews F.D. Wear improvement of surgical titanium alloys by ion implantation. J. Vacuum Sci. Technol. A 1985, 3:2670-2674.
3. Shanaghi A., Rouhaghdam A.R.S., Ahangarani S., Chu P.K., Farahani T.S. Effects of duty cycle on microstructure and corrosion behavior of TiC coatings prepared by DC pulsed plasma CVD. Appl. Surf. Sci. 2012, 258:3051-3057.
4. Höche D., Schaaf P. Laser nitriding: investigations on the model system TiN. A review. Heat Mass Transf. 2011, 47:519-540.
5. Schintlmeister W., Pacher O., Pfaffinger K., Raine T. Structure and strength effects in CVD titanium carbide and titanium nitride coatings. J. Electrochem. Soc. 1976, 123:924-929.
6. Hartley N.E.W. Ion implantation and surface modification in tribology. Wear 1975, 34:427-438.
7. Dearnaley G. Ion-beam modification of metals. Nucl. Instrum. Methods B 1990, 50:358-367.
8. Höche D., Blawert C., Cavellier M., Busardo D., Gloriant T. Magnesium nitride phase formation by means of ion beam implantation technique. Appl. Surf. Sci. 2011, 257:5626-5633.
9. Guemmaz M., Mosser A., Boudoukha L., Grob J.J., Raiser D., Sens J.C. Ion beam synthesis of non-stoichiometric titanium carbide: composition structure and nanoindentation studies. Nucl. Instrum. Methods B 1996, 111:263-270.
10. Rauschenbach B. Mechanical-properties of nitrogen ion-implanted Ti-6Al-4V Alloy. Surf. Coat. Technol. 1994, 66:279-282.
11. Shum P.W., Xu Y.F., Zhou Z.F., Cheng W.L., Li K.Y. Study of TiAlSiN coatings post-treated with N and C+N ion implantations. Part 2: the tribological analysis. Wear 2012, 274-275:274-280.
12. D. Busardo, Method for treating a metal element with ion beam, in: Q. Ingénierie (Ed.), France, 2009.
13. Geller R. Electron Cyclotron Resonance Ion Sources and ECR Plasmas 1996, Taylor & Francis.
14. Gordin D.M., Busardo D., Cimpean A., Vasilescu C., Höche D., Drob S.I., Mitran V., Cornen M., Gloriant T. Design of a nitrogen-implanted titanium-based superelastic alloy with optimized properties for biomedical applications. Mater. Sci. Eng. C-Mater. 2013, 33:4173-4182.
15. Gordin D.M., Gloriant T., Chane-Pane V., Busardo D., Mitran V., Höche D., Vasilescu C., Drob S.I., Cimpean A. Surface characterization and biocompatibility of titanium alloys implanted with nitrogen by Hardion plus technology. J. Mater. Sci-Mater. Med. 2012, 23:2953-2966.
16. Muramatsu M., Kitagawa A. A review of ion sources for medical accelerators (invited). Rev. Sci. Instrum. 2012, 83.
17. P. Elleaume, O. Chubar, J. Chavanne, Computing 3D magnetic fields from insertion devices, in: Proceedings of the IEEE Particle Accelerator Conference, Vancouver, 1997, pp. 3509-3511.
18. Korwin-Pawlowski M.L., Amiz K., Elsayed-Ali H. Modeling of a multicharged ion beam line using SIMION. Photonics North 2009, 73862B. International Society for Optics and Photonics, Quebec.
19. Lai H., McJunkin T.R., Miller C.J., Scott J.R., Almirall J.R. The predictive power of SIMION/SDS simulation software for modeling ion mobility spectrometry instruments. Int. J. Mass Spectrom. 2008, 276:1-8.
20. F. Read, N. Bowring, The BEM Programs of CPO Ltd., pp. 25.
21. Viviente J.L., Garcia A., Alonso F., Braceras I., Onate J.I. X-ray photoelectron spectroscopy characterization of high dose carbon-implanted steel and titanium alloys. Appl. Surf. Sci. 1999, 144-145:249-254.
22. + at very high doses. Vacuum 1999, 52:141-146.
23. Pierret C. Mechanical and tribological behaviour of Ti-6Al-4V alloy after multicharged carbon and oxygen ion implantation. Carbon Ion Beam Development 2011, Université de Caen, Caen.
24. Amsel G., Nadai J., d'Artemare E., David D., Girard E., Moulin J. Microanalysis by the direct observation of nuclear reactions using a 2MeV Van de Graaff. Nucl. Instrum. Methods 1971, 92:481-498.
25. Grygiel C., Lebius H., Bouffard S., Quentin A., Ramillon J.M., Madi T., Guillous S., Been T., Guinement P., Lelievre D., Monnet I. Online in situ x-ray diffraction setup for structural modification studies during swift heavy ion irradiation. Rev. Sci. Instrum. 2012, 83.
26. Jackson R.L., Streator J.L. A multi-scale model for contact between rough surfaces. Wear 2006, 261:1337-1347.
27. Põdra P., Andersson S. Simulating sliding wear with finite element method. Tribol. Int. 1999, 32:71-81.
28. Stoquert J., Pêcheux F., Hervé Y., Marchal H., Stuck R., Siffert P. VRBS: a virtual RBS simulation tool for ion beam analysis. Nucl. Instrum. Methods Phys. Res. Sect. B: Beam Interact. Mater. Atoms 1998, 136:1152-1156.
29. J.F. Ziegler, J.P. Biersack, SRIM-2008, Stopping Power and Range of Ions in Matter, Organisation for Economic Co-Operation and Development, Nuclear Energy Agency-OECD/NEA, Le Seine Saint-Germain, 12 boulevard des Iles, F-92130 Issy-les-Moulineaux, France, 2008.
30. Garcia A., Viviente J.L., Alonso F., Loinaz A., Onate J.I. Growth of carbon layers on Ti-6Al-4V alloy by very high dose carbon implantation. Surf. Coat. Technol. 1997, 97:499-503.
31. Krupa D., Jezierska E., Baszkiewicz J., Wierzchon T., Barcz A., Gawlik G., Jagielski J., Sobczak J.W., Bilinski A., Larisch B. Effect of carbon ion implantation on the structure and corrosion resistance of OT-4-0 titanium alloy. Surf. Coat. Technol. 1999, 114:250-259.
32. Onate J.I., Alonso F., Garcia A. Improvement of tribological properties by ion implantation. Thin Solid Films 1998, 317:471-476.
33. Wenzel A., Hammerl C., Koniger A., Rauschenbach B. Formation of titanium carbide by high-fluence carbon ion implantation. Nucl. Instrum. Methods B 1997, 129:369-376.
34. Qu J., Blau P.J., Watkins T.R., Cavin O.B., Kulkarni N.S. Friction and wear of titanium alloys sliding against metal, polymer, and ceramic counterfaces. Wear 2005, 258:1348-1356.
35. Sanchez-Lopez J.C., Martinez-Martinez D., Lopez-Cartes C., Fernandez A. Tribological behaviour of titanium carbide/amorphous carbon nanocomposite coatings: from macro to the micro-scale. Surf. Coat. Technol. 2008, 202:4011-4018.
36. Kumashiro Y., Itoh A., Kinoshita T., Sobajima M. The micro-Vickers hardness of TiC single crystals up to 1500°C. J. Mater. Sci. 1977, 12:595-601.
37. Hummer E., Perry A. Adhesion and hardness of ion-plated TiC and TiN coatings. Thin Solid Films 1983, 101:243-251.
38. Krupa D., Baszkiewicz J., Jezierska E., Kozubowski J., Barcz A. Effect of nitrogen, carbon and oxygen ion implantation on the structure and corrosion resistance of OT-4-0 titanium alloy. Nukleonika 1999, 44:207-216.