Size- and charge-controllable polystyrene spheres for templates in the preparation of porous silica particles with tunable internal hole configurations

Chemical Engineering Journal

Volumn 256, Issue , 2014, Pages 421-430

  Nandiyanto, Asep Bayu Dani ^a,b   Suhendi, Asep ^a,c   Ogi, Takashi ^a   Umemoto, Ryohei ^a   Okuyama, Kikuo ^a  

^a HIROSHIMA UNIVERSITY   (Japan)

^b UNIVERSITAS PENDIDIKAN INDONESIA   (Indonesia)

^c TELKOM UNIVERSITY   (Indonesia)

Author keywords

Hollow particles; Polystyrene spheres; Porous material; Silica; Template; Zeta potential

Indexed keywords

PHYSICOCHEMICAL PROPERTIES; POROUS MATERIALS; SILICA; SILICA NANOPARTICLES; SOUND INSULATING MATERIALS; SPHERES; STYRENE; SURFACE ACTIVE AGENTS; ZETA POTENTIAL;

HOLE CONFIGURATION; HOLLOW PARTICLE; INITIATOR CONCENTRATION; POLYSTYRENE SPHERES; REACTION PARAMETERS; STRUCTURE TEMPLATES; SYNTHESIS PROCEDURE; TEMPLATE;

POLYSTYRENES;

EID: 84905270473     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2014.07.005     Document Type: Article

References (46)

1. Thill A., Spalla O. Influence of templating latex on spray dried nanocomposite powders studied by small angle scattering. J. Colloid Interface Sci. 2005, 291:477-488.
2. Ogi T., Nandiyanto A.B.D., Okuyama K. Nanostructuring strategies in functional fine-particle synthesis towards resource and energy saving applications. Adv. Powder Technol. 2014, 25:3-17.
3. Nandiyanto A.B.D., Okuyama K. Progress in developing spray-drying methods for the production of controlled morphology particles: from the nanometer to submicrometer size ranges. Adv. Powder Technol. 2011, 22:1-19.
4. Studart A.R., Gonzenbach U.T., Tervoort E., Gauckler L.J. Processing routes to macroporous ceramics: a review. J. Am. Ceram. Soc. 2006, 89:1771-1789.
5. Hieda K., Hyodo T., Shimizu Y., Egashira M. Preparation of porous tin dioxide powder by ultrasonic spray pyrolysis and their application to sensor materials. Sens. Actuators B 2008, 133:144-150.
6. Nandiyanto A.B.D., Iskandar F., Okuyama K. Macroporous anatase titania particle: aerosol self-assembly fabrication with photocatalytic performance. Chem. Eng. J. 2009, 152:293-296.
7. Cho Y.-S., Choi S.-Y., Kim Y.-K., Yi G.-R. Bulk synthesis of ordered macroporous silica particles for superhydrophobic coatings. J. Colloid Interface Sci. 2012, 386:88-98.
8. Ahn K.W., Rah H., Kim S.-G. Preparation of spherical macroporous silica in an aerosol phase. Korean J. Chem. Eng. 2012, 29:1444-1452.
9. 4 at PS nanoparticles as partially sacrificial templates. Chem. Eng. J. 2012, 187:372-379.
10. Wang X., Wang Y., Feng L., Liu P., Zhang X. A novel adsorbent based on functionalized three-dimensionally ordered macroporous cross-linked polystyrene for removal of salicylic acid from aqueous solution. Chem. Eng. J. 2012, 203:251-258.
11. Jang H.R., Oh H.-J., Kim J.-H., Jung K.Y. Synthesis of mesoporous spherical silica via spray pyrolysis: pore size control and evaluation of performance in paclitaxel pre-purification. Micropor. Mesopor. Mater. 2013, 165:219-227.
12. Nandiyanto A.B.D., Suhendi A., Arutanti O., Ogi T., Okuyama K. Influences of surface charge, size, and concentration of colloidal nanoparticles on fabrication of self-organized porous silica in film and particle forms. Langmuir 2013, 29:6262-6270.
13. Wan H., Long Y., Xu H., Song K., Yang G., Tung C.-H. A new strategy to prepare hollow silica microspheres with tunable holes on the shell wall. Langmuir 2014, 30:683-686.
14. Kim J., Lee J., Chang H., Choi J.-W., Jang H.D. Synthesis of hollow silica particles with tunable size, shell thickness, and morphology. J. Cryst. Growth 2013, 373:128-131.
15. Shen B.-H., Hsieh M.-L., Chen H.-Y., Wu J.-Y. The preparation of hollow silica spheres with mesoporous shell via polystyrene emulsion latex template and the investigation of ascorbic acid release behavior. J. Polym. Res. 2013, 20:1-11.
16. Nandiyanto A.B.D., Suhendi A., Ogi T., Iwaki T., Okuyama K. Synthesis of additive-free cationic polystyrene particles with controllable size for hollow template applications. Colloid Surf. A 2012, 396:96-105.
17. Ottewill R.H., Shaw J.N. Stability of monodisperse polystyrene latex dispersions of various sizes. Discuss. Faraday Soc. 1966, 42:154-163.
18. Goodwin J.W., Hearn J., Ho C.C., Ottewil R.H. Studies on the preparation and characterization of monodisperse polystyrene lattice. Colloid Polym. Sci. 1974, 252:464-471.
19. Goodwin J., Ottewill R., Pelton R. Studies on the preparation and characterization of monodisperse polystyrene latices V.: the preparation of cationic latices. Colloid Polym. Sci. 1979, 257:61-69.
20. Gonzalez I., Meira G., Oliva H. Synthesis of polystyrene with mixtures of mono-and bifunctional initiators. J. Appl. Polym. Sci. 1996, 59:1015-1026.
21. Ganachaud F., Sauzedde F., Elaissari A., Pichot C. Emulsifier-free emulsion copolymerization of styrene with two different amino-containing cationic monomers. I. Kinetic studies. J. Appl. Polym. Sci. 1997, 65:2315-2330.
22. Yamamoto T., Nakayama M., Kanda Y., Higashitani K. Growth mechanism of soap-free polymerization of styrene investigated by AFM. J. Colloid Interface Sci. 2006, 297:112-121.
23. Goodwin J.W., Ottewill R.H., Pelton R., Vianello G., Yateo D.E. Control of particle size in the formation of polymer latices. Br. Polym. J. 1978, 10:173-180.
24. Furusawa K., Norde W., Lyklema J. A method for preparing surfactant-free polystyrene latices of high surface charge. Colloid Polym. Sci. 1972, 250:908-909.
25. Stone-Masui J., Watillon A. Characterization of surface charge on polystyrene latices. J. Colloid Interface Sci. 1975, 52:479-503.
26. Qiu L., Qu B. Preparation and characterization of surfactant-free polystyrene/layered double hydroxide exfoliated nanocomposite via soap-free emulsion polymerization. J. Colloid Interface Sci. 2006, 301:347-351.
27. Nazaran P., Tauer K. Nucleation in emulsion polymerization: another step towards non-micellar nucleation theory. Macromol. Symp. 2007, 259:264-273.
28. Yamamoto T., Kanda Y., Higashitani K. Nucleation and growth process of polystyrene particle investigated by AFM. J. Chem. Eng. Jpn. 2006, 39:596-603.
29. Telford A.M., Pham B.T., Neto C., Hawkett B.S. Micron-sized polystyrene particles by surfactant-free emulsion polymerization in air: synthesis and mechanism. J. Polym. Sci. A 2013, 51:3997-4002.
30. Hagura N., Nandiyanto A.B.D., Iskandar F., Okuyama K. A role of template surface charge in the preparation of porous and hollow particles using spray-drying. Chem. Lett. 2009, 38:1076-1077.
31. Suhendi A., Nandiyanto A.B.D., Munir M.M., Ogi T., Gradon L., Okuyama K. Self-assembly of colloidal nanoparticles inside charged droplets during spray-drying in the fabrication of nanostructured particles. Langmuir 2013, 29:13152-13161.
32. Liu Q., Li Y., Duan Y., Zhou H. Research progress on the preparation and application of monodisperse cationic polymer latex particles. Polym. Int. 2012, 61:1593-1602.
33. He G., Pan Q. Synthesis of polystyrene and polystyrene/poly(methylmethacrylate) nanoparticles. Macromol. Rapid Commun. 2004, 25:1545-1548.
34. Ramos J., Costoyas Á., Forcada J. Kinetics of the batch cationic emulsion polymerization of styrene: a comparative study with the anionic case. J. Polym. Sci. A 2006, 44:4461-4478.
35. Zhang F., Bai Y., Ma Y., Yang W. Preparing of monodisperse and cation-charged polystyrene particles stabilized with polymerizable quarternary ammonium by dispersion polymerization in a methanol-water medium. J. Colloid Interface Sci. 2009, 334:13-21.
36. Nandiyanto A.B.D., Iskandar F., Okuyama K. Nanosized polymer particle-facilitated preparation of mesoporous silica particles using a spray method. Chem. Lett. 2008, 37:1040-1041.
37. Nandiyanto A.B.D., Kim S.G., Iskandar F., Okuyama K. Synthesis of spherical mesoporous silica nanoparticles with nanometer-size controllable pores and outer diameters. Micropor. Mesopor. Mater. 2009, 120:447-453.
38. Nandiyanto A.B.D., Hagura N., Iskandar F., Okuyama K. Design of a highly ordered and uniform porous structure with multisized pores in film and particle forms using a template-driven self-assembly technique. Acta Mater. 2010, 58:282-289.
39. Nandiyanto A.B.D., Ogi T., Iskandar F., Okuyama K. Highly ordered porous monolayer generation by dual-speed spin-coating with colloidal templates. Chem. Eng. J. 2011, 167:409-415.
40. Nandiyanto A.B.D., Akane Y., Ogi T., Okuyama K. Mesopore-free hollow silica particles with controllable diameter and shell thickness via additive-free synthesis. Langmuir 2012, 28:8616-8624.
41. Nandiyanto A.B.D., Iwaki T., Ogi T., Okuyama K. Mesopore-free silica shell with nanometer-scale thickness-controllable on cationic polystyrene core. J. Colloid Interface Sci. 2013, 389:134-146.
42. Nandiyanto A.B.D., Ogi T., Okuyama K. Control of shell structural properties and cavity diameter of hollow magnesium fluoride particles. ACS Appl. Mater. Interface 2014, 6:4418-4427.
43. Awan M., Dimonie V., El-Aasser M. Anionic dispersion polymerization of styrene. II. Mechanism of particle formation. J. Polym. Sci., Part A: Polym. Chem. 1996, 34:2651-2664.
44. Gac J.M., Gradoń L. A distributed parameter model for the spray drying of multicomponent droplets with a crust formation. Adv. Powder Technol. 2013, 24:324-330.
45. Jung D.S., Ko Y.N., Kang Y.C., Park S.B. Recent progress in electrode materials produced by spray pyrolysis for next-generation lithium ion batteries. Adv. Powder Technol. 2014, 25:18-31.
46. Hegde S., Babu S. Study of surface charge effects on oxide and nitride planarization using alumina/ceria mixed abrasive slurries. Electrochem. Solid State 2004, 7:G316-G318.