Rapid adsorption of heavy metals by Fe3O4/talc nanocomposite and optimization study using response surface methodology

International Journal of Molecular Sciences

Volumn 15, Issue 7, 2014, Pages 12913-12927

  Kalantari, Katayoon ^a   Ahmad, Mansor B ^a   Masoumi, Hamid Reza Fard ^a   Shameli, Kamyar ^a   Basri, Mahiran ^a   Khandanlou, Roshanak ^a  

^a UNIVERSITY PUTRA MALAYSIA   (Malaysia)

Author keywords

Adsorption; Adsorption kinetics; Heavy metals; Response surface methodology (RSM)

Indexed keywords

ADSORBENT; CUPRIC ION; LEAD; MAGNETITE NANOCOMPOSITE; NANOADSORBENT; NANOCOMPOSITE; NICKEL; TALC NANOCOMPOSITE; UNCLASSIFIED DRUG; FERRIC ION; HEAVY METAL; OXIDE; TALC;

ADSORBENT DOSAGE; ADSORPTION; ANALYSIS OF VARIANCE; ANALYTIC METHOD; ARTICLE; ATOMIC ABSORPTION SPECTROMETRY; BRUNAUER EMMETT TELLER METHOD; CENTRAL COMPOSITE ROTATABLE DESIGN; CO PRECIPITATION; INITIAL ION CONCENTRATION; ISOTHERM; KINETICS; PARAMETERS; PROCESS OPTIMIZATION; REMOVAL TIME; RESPONSE SURFACE METHOD; SORPTION ISOTHERM; CHEMISTRY;

ADSORPTION; FERRIC COMPOUNDS; METALS, HEAVY; NANOCOMPOSITES; OXIDES; TALC;

EID: 84904618435     PISSN: 16616596     EISSN: 14220067     Source Type: Journal    
DOI: 10.3390/ijms150712913     Document Type: Article

References (33)

1. Geyikçi, F.; Ki{dotless}li{dotless}ç, E.; Çoruh, S.; Elevli, S. Modelling of lead adsorption fromindustrial sludge leachate on red mud by using RSM and ANN. Chem. Eng. J. 2012, 183, 53-59.
2. Xu, D.; Tan, X.; Chen, C.; Wang, X. Removal of Pb(II) from aqueous solution by oxidized multiwalled carbon nanotubes. J. Hazard. Mater. 2008, 154, 407-416.
3. Karthikeyan, T.; Rajgopal, S.; Miranda, L.R. Chromium (VI) adsorption from aqueous solution by Hevea Brasilinesis sawdust activated carbon. J. Hazard. Mater. 2005, 124, 192-199.
4. Bremmell, K.E.; Addai-Mensah, J. Interfacial-chemistry mediated behavior of colloidal talc dispersions. J. Colloid Interface Sci. 2005, 283, 385-391.
5. Hu, J.; Lo, I.; Chen, G. Removal of Cr (VI) by magnetite. Water Sci. Technol. 2004, 50, 139-146.
6. Oliveira, L.C.; Rios, R.V.; Fabris, J.D.; Sapag, K.; Garg, V.K.; Lago, R.M. Clay-iron oxide magnetic composites for the adsorption of contaminants in water. Appl. Clay Sci. 2003, 22, 169-177.
7. Liu, J.; Qiao, S.Z.; Hu, Q.H. Magnetic nanocomposites with mesoporous structures: Synthesis and applications. Small 2011, 7, 425-443.
8. Lu, A.H.; Salabas, E.e.L.; Schüth, F. Magneticnanoparticles: Synthesis, protection, functionalization, and application. Angew. Chem. Int. Ed. 2007, 46, 1222-1244.
9. Arruebo, M.; Fernández-Pacheco, R.; Irusta, S.; Arbiol, J.; Ibarra, M.R.; Santamaría, J. Sustained release of doxorubicin from zeolite-magnetite nanocomposites prepared by mechanical activation. Nanotechnology 2006, 17, 4057.
10. Michot, L.; Villieras, F.; François, M.; Yvon, J.; le Dred, R.; Cases, J. The structural microscopic hydrophilicity of talc. Langmuir 1994, 10, 3765-3773.
11. Wallqvist, V.; Claesson, P.M.; Swerin, A.; Schoelkopf, J.; Gane, P.A. Interaction forces between talc and hydrophobic particles probed by AFM. Colloids Surf. A 2006, 277, 183-190.
12. Castillo, L.; Barbosa, S.; Capiati, N. Influence of talc genesis and particle surface on the crystallization kinetics of polypropylene/talc composites. J. Appl. Polym. Sci. 2012, 126, 1763-1772.
13. Chauhan, V.S.; Bhardwaj, N.K.; Chakrabarti, S.K. Effect of particle size of magnesium silicate filler on physical properties of paper. Can. J. Chem. Eng. 2013, 91, 855-861.
14. Sohrabi, M.R.; Amiri, S.; Masoumi, H.R.F.; Moghri, M. Optimization of direct yellow 12 dye removal by nanoscale zero-valent iron using response surface methodology. J. Ind. Eng. Chem. 2014, 20, 2535-2542.
15. Feng, D.; Aldrich, C.; Tan, H. Removal of heavy metal ions by carrier magnetic separation of adsorptive particulates. Hydrometallurgy 2000, 56, 359-368.
16. Fard Masoumi, H.R.; Basri, M.; Kassim, A.; Kuang Abdullah, D.; Abdollahi, Y.; Abd Gani, S.S.; Rezaee, M. Statistical Optimization of process parameters for lipase-catalyzed synthesis of triethanolamine-based esterquats using response surface methodology in 2-liter bioreactor. Sci. World J. 2013, 2013, doi:org/10.1155/2013/962083.
17. Bingöl, D.; Hercan, M.; Elevli, S.; Ki{dotless}li{dotless}ç, E. Comparison of the results of response surface methodology and artificial neural network for the biosorption of lead using black cumin. Bioresour. Technol. 2012, 112, 111-115.
18. Witek-Krowiak, A.; Chojnacka, K.; Podstawczyk, D.; Dawiec, A.; Pokomeda, K. Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption process. Bioresour. Technol. 2014, 160, 150-160.
19. 4magnetite nanoparticles on the exterior of talc layers. Res. Chem. Intermed. 2014, doi:10.1007/s11164-013-1336-4.
20. Luengo, C.; Puccia, V.; Avena, M. Arsenate adsorption and desorption kinetics on a Fe (III)-modified montmorillonite. J. Hazard. Mater. 2011, 186, 1713-1719.
21. Huang, P.; Fuerstenau, D.W. The effect of the adsorption of lead and cadmium ions on the interfacial behavior of quartz and talc. Colloids Surf. A 2000, 177, 147-156.
22. Salamatinia, B.; Kamaruddin, A. Application of response surface methodology for the optimization of NaOH treatment on oil palm frond towards improvement in the sorption of heavy metals. Desalination 2009, 244, 227-238.
23. Tunali, S.; Akar, T. Zn (II) biosorption properties of Botrytis cinereabiomass. J. Hazard. Mater. 2006, 131, 137-145.
24. Dal Bosco, S.M.; Jimenez, R.S.; Carvalho, W.A. Removal of toxic metals from wastewater by Brazilian natural scolecite. J. Colloid Interface Sci. 2005, 281, 424-431.
25. Wu, P.; Wu, W.; Li, S.; Xing, N.; Zhu, N.; Li, P.; Wu, J.; Yang, C.; Dang, Z. Removal of Cd 2+ from aqueous solution by adsorption using Fe-montmorillonite. J. Hazard. Mater. 2009, 169, 824-830.
26. 4) impregnated onto tea waste for the removal of nickel (II) from aqueous solution. J. Hazard. Mater. 2011, 186, 160-168.
27. Shahmohammadi-Kalalagh, S.; Babazadeh, H.; Nazemi, A.; Manshouri, M. Isotherm and kinetic studies on adsorption of Pb, Zn and Cu by kaolinite. Caspian J. Environ. Sci. 2011, 9, 243-255.
28. Chaudhary, N.; Balomajumder, C. Optimization study of adsorption parameters for removal of phenol on aluminum impregnated fly ash using response surface methodology. J. Taiwan Inst. Chem. Eng. 2014, 45, 852-859.
29. Rath, R.K.; Subramanian, S.; Laskowski, J. Adsorption of dextrin and guar gum onto talc. A comparative study. Langmuir 1997, 13, 6260-6266.
30. Sprynskyy, M.; Kowalkowski, T.; Tutu, H.; Cukrowska, E.M.; Buszewski, B. Adsorption performance of talc for uranium removal from aqueous solution. Chem. Eng. J. 2011, 171, 1185-1193.
31. 4nanoparticles with enhanced performance for Cu(II) removal from water. J. Membr. Sci. 2012, 415, 250-259.
32. Sprynskyy, M.; Gadzała-Kopciuch, R.; Nowak, K.; Buszewski, B. Removal of zearalenone toxin from synthetics gastric and body fluids using talc and diatomite: A batch kinetic study. Colloids Surf. B 2012, 94, 7-14.
33. 4magnetic nanocomposites using chemicalco-precipitation method. Int. J. Nanomed. 2013, 8, 1817.