Development and application of tool wear: A review of the characterization of TiC-based cermets with different binders

Chemical Engineering Journal

Volumn 255, Issue , 2014, Pages 445-452

  Rajabi, A ^a   Ghazali, M J ^a   Syarif, J ^a   Daud, A R ^a  

^a UNIVERSITI KEBANGSAAN MALAYSIA   (Malaysia)

Author keywords

Carbides; Mechanical properties; Nitrides; Sintering

Indexed keywords

BINDERS; CARBIDE CUTTING TOOLS; CARBIDES; FRACTURE MECHANICS; MECHANICAL PROPERTIES; NICKEL; NITRIDES; SINTERING; TITANIUM CARBIDE;

CHEMICAL COMPOSITIONS; CRITICAL ISSUES; DEVELOPMENT AND APPLICATIONS; DIFFERENT BINDERS; GRAIN SIZE; TIC CERMET; TIC-BASED CERMETS; TOOL WEAR;

CERMETS;

EID: 84904131881     PISSN: 13858947     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cej.2014.06.078     Document Type: Review

References (81)

1. Aslan E. Experimental investigation of cutting tool performance in high speed cutting of hardened X210 Cr12 cold-work tool steel 62 HRC. Mater. Des. 2005, 26:21-27.
2. Yao Z., Stiglich J.J., Sudarshan T. Nano-grained tungsten carbide-cobalt (WC/Co). Mater. Modif. 1999, 1-27.
3. Maity S.R., Chatterjee P., Chakraborty S. Cutting tool material selection using grey complex proportional assessment method. Mater. Des. 2012, 36:372-378.
4. Liu N., Han C., Yang H., Xu Y., Shi M., Chao S., Xie F. The milling performances of TiC-based cermet tools with TiN nanopowders addition against normalized medium carbon steel AISI1045. Wear 2005, 258:1688-1695.
5. Yang Q., Xiong W., Li S., Dai H., Li J. Characterization of oxide scales to evaluate high temperature oxidation behavior of Ti(C,N)-based cermets in static air. J. Alloy. Compd. 2010, 506:461-467.
6. Muhammad R., Ahmed N., Roy A., Silberschmidt V.V. Turning of advanced alloys with vibrating cutting tool. Solid State Phenom. 2012, 188:277-284.
7. Hotta M., Goto T. Spark plasma sintering of TiN-cubic BN composites. J. Ceram. Soc. Jpn. 2010, 118:137-140.
8. 3 composites by combustion synthesis involving thermite reactions. Chem. Eng. J. 2009, 147:405-411.
9. 1-xcarbonitride solid solutions. Chem. Eng. J. 2012, 192:58-66.
10. Zhang X., Liu N., Rong C., Zhou J. Microstructure and mechanical properties of TiC-TiN-Zr-WC-Ni-Co cermets. Ceram. Int. 2009, 35:1187-1193.
11. Zheng Y., Xiong W., Liu W., Lei W., Yuan Q. Effect of nano addition on the microstructures and mechanical properties of Ti(C,N)-based cermets. Ceram. Int. 2005, 31:165-170.
12. Zheng Y., Wang S., You M., Tan H., Xiong W. Fabrication of nanocomposite Ti(C,N)-based cermet by spark plasma sintering. Mater. Chem. Phys. 2005, 92:64-70.
13. 4C system and fabrication of coatings using the cermet powders. Chem. Eng. J. 2013, 233:138-148.
14. 3Al composites by laser ignited self-propagating high-temperature synthesis (LISHS). Chem. Eng. J. 2008, 140:621-625.
15. 0.2) C carbides prepared by mechanical alloying and spark plasma sintering. Ceram. Int. 2012, 38:4929-4933.
16. Russias J., Cardinal S., Aguni Y., Fantozzi G., Bienvenu K., Fontaine J. Influence of titanium nitride addition on the microstructure and mechanical properties of TiC-based cermets. Int. J. Refract Metal Hard Mater. 2005, 23:358-362.
17. Liu N., Xu Y., Li Z., Chen M., Li G., Zhang L. Influence of molybdenum addition on the microstructure and mechanical properties of TiC-based cermets with nano-TiN modification. Ceram. Int. 2003, 29:919-925.
18. Liu N., Chen M., Xu Y., Zhou J., Shi M. Wettability and bonding between Ni and Ti(C,N) with multiple carbide additions. J. Mater. Sci. Technol. 2005, 21.
19. Han C., Den C., Zhao D., Hu K. Milling performance of TiC-Ni cermet tools toughened by TiN nanoparticles. Int. J. Refract Metal Hard Mater. 2012, 30:12-15.
20. Topka P., Karban J., Soukup K., Jirátová K., Šolcová O. Preparation of Al-SBA-15 pellets with low amount of additives: effect of binder content on texture and mechanical properties. Application to Friedel-Crafts alkylation. Chem. Eng. J. 2011, 168:433-440.
21. Upadhyaya G. Materials science of cemented carbides-an overview. Mater. Des. 2001, 22:483-489.
22. Zhang W., Zhang X., Wang J., Hong C. Effect of Fe on the phases and microstructure of TiC-Fe cermets by combustion synthesis/quasi-isostatic pressing. Mater. Sci. Eng., A 2004, 381:92-97.
23. Arenas F., Rondón C., Sepúlveda R. Friction and tribological behavior of (Ti,V)C-Co cermets. J. Mater. Process. Technol. 2003, 143:822-826.
24. Cardinal S., Malchere A., Garnier V., Fantozzi G. Microstructure and mechanical properties of TiC-TiN based cermets for tools application. Int. J. Refract Metal Hard Mater. 2009, 27:521-527.
25. Pirso J., Viljus M., Juhani K., Kuningas M. Three-body abrasive wear of TiC-NiMo cermets. Tribol. Int. 2010, 43:340-346.
26. Shon I.-J., Jeong I.-K., Ko I.-Y., Doh J.-M., Woo K.-D. Sintering behavior and mechanical properties of WC-10Co, WC-10Ni and WC-10Fe hard materials produced by high-frequency induction heated sintering. Ceram. Int. 2009, 35:339-344.
27. Zawrah M. Synthesis and characterization of WC-Co nanocomposites by novel chemical method. Ceram. Int. 2007, 33:155-161.
28. Wang J., Wang Y., Ding Y., Gong W. Microstructure and wear-resistance of Fe-(Ti,V)C composite. Mater. Des. 2007, 28:2207-2209.
29. Chan K., Harada Y., Liang J., Yoshida F. Deformation behaviour of chromium sheets in mechanical and laser bending. J. Mater. Process. Technol. 2002, 122:272-277.
30. Wadsack R., Pippan R., Schedler B. Structural refinement of chromium by severe plastic deformation. Fusion Eng. Des. 2003, 66:265-269.
31. Mohammadpour M., Abachi P., Pourazarang K. Effect of cobalt replacement by nickel on functionally graded cemented carbonitrides. Int. J. Refract Metal Hard Mater. 2012, 30:42-47.
32. Song W., Hu J., Zhao Y., Shao D., Li J. Efficient removal of cobalt from aqueous solution using β-cyclodextrin modified graphene oxide. RSC Adv. 2013, 3:9514-9521.
33. Tucker M.C., Cheng L., DeJonghe L.C. Inorganic binder-containing composite cathode contact materials for solid oxide fuel cells. J. Power Sources 2013, 224:174-179.
34. Kakade M., Ramanathan S., Das D. Gel-combustion, characterization and processing of porous Ni-YSZ cermet for anodes of solid oxide fuel cells (SOFCs). Ceram. Int. 2011, 37:195-200.
35. Manoj Kumar B., Kumar J.R., Basu B. Crater wear mechanisms of TiCN-Ni-WC cermets during dry machining. Int. J. Refract Metal Hard Mater. 2007, 25:392-399.
36. 2based cermets. Mater. Sci. Eng., A 2012, 556:878-884.
37. 2-Ti(C,N) cermets composite powder. Adv. Mater. Res. 2012, 468:1247-1250.
38. Graeve O.A., Munir Z.A. The effect of an electric field on the microstructural development during combustion synthesis of TiNi-TiC composites. J. Alloy. Compd. 2002, 340:79-87.
39. 2-TiC particulates reinforced steel matrix composites. J. Alloy. Compd. 2005, 391:55-59.
40. Zhan L., Shen P., Jiang Q. Effect of nickel addition on the exothermic reaction of the Ti-C-BN system. Int. J. Refract Metal Hard Mater. 2010, 28:324-329.
41. Saidi A., Barati M. Production of (W, Ti) C reinforced Ni-Ti matrix composites. J. Mater. Process. Technol. 2002, 124:166-170.
42. Hussainova I. Effect of microstructure on the erosive wear of titanium carbide-based cermets. Wear 2003, 255:121-128.
43. Madge S., Louzguine-Luzgin D., Lewandowski J., Greer A. Toughness, extrinsic effects and Poisson's ratio of bulk metallic glasses. Acta Mater. 2012, 60:4800-4809.
44. Selokar A.W., Goel D., Prakash U. A comparative study of cavitation erosive behaviour of 23/8N nitronic steel and 13/4 martensitic stainless steel. Adv. Mater. Res. 2012, 585:554-558.
45. Yuan M., Yang Y., Li C., Heng P., Li L. Numerical analysis of the stress-strain distributions in the particle reinforced metal matrix composite SiC/6064Al. Mater. Des. 2012, 38:1-6.
46. Zhou S., Zhao W., Xiong W. Microstructure and properties of the cermets based on Ti(C,N). Int. J. Refract Metal Hard Mater. 2009, 27:26-32.
47. Feng P., He Y.-H., Xiao Y.-F., Liu W.-J., Xiong W.-H. Influence of preparation process on sintering behavior and mechanical properties of ultrafine grained Ti(C,N)-based cermets. Trans. Nonferrous Met. Soc. China 2007, 17:531-536.
48. Shin M., Cho K., Kim S., Jang H. Friction instability induced by corrosion of gray iron brake discs. Tribol. Lett. 2010, 37:149-157.
49. Reddy G.M., Prasad K.S., Rao K.S., Mohandas T. Friction surfacing of titanium alloy with aluminium metal matrix composite. Surf. Eng. 2011, 27:92-98.
50. Abedi H., Salehi M. Effect of post-oxidizing temperature on tribological and corrosion behavior of plasma nitrided austenitic stainless steel. Mater. Des. 2011, 32:2100-2106.
51. Lin Y.-C., Chen Y.-C. Reinforcements affect mechanical properties and wear behaviors of WC clad layer by gas tungsten arc welding. Mater. Des. 2013, 45:6-14.
52. Wang J., Liu Y., Zhang P., Ye J., Tu M. Effect of VC and nano-TiC addition on the microstructure and properties of micrometer grade Ti(CN)-based cermets. Mater. Des. 2009, 30:2222-2226.
53. 0.5)-WC-Mo-Ni cermets. Int. J. Refract Metal Hard Mater. 2010, 28:243-249.
54. Liu M., Liu Z.D. Effect of molybdenum on the microstructure and mechanical properties of TiC/Ni cermet cladding layers. Adv. Mater. Res. 2011, 177:378-381.
55. 2C on erosion-corrosion resistance behavior of Ti(C,N)-based cermets. Wear 2012, 294:364-369.
56. Hwang Y., Kim M., Kim J. Fabrication of surface-treated SiC/epoxy composites through a wetting method for enhanced thermal and mechanical properties. Chem. Eng. J. 2014, 246:229-237.
57. 2C-Co cermets. Int. J. Refract Metal Hard Mater. 2008, 26:190-196.
58. Guo X., Niu Y., Huang L., Ji H., Zheng X. Microstructure and tribological property of TiC-Mo composite coating prepared by vacuum plasma spraying. J. Therm. Spray Technol. 2012, 21:1083-1090.
59. y)/(Ni+W) composites. Mater. Des. 2013, 45:286-291.
60. Chen X., Xiong W., Qu J., Yang Q., Yao Z., Huang Y. Microstructure and mechanical properties of (Ti, W, Ta) C-xMo-Ni cermets. Int. J. Refract Metal Hard Mater. 2012, 31:56-61.
61. Wu Q., Yang C., Xue F., Sun Y. Effect of Mo addition on the microstructure and wear resistance of in situ TiC/Al composite. Mater. Des. 2011, 32:4999-5003.
62. Alvaredo P., Tsipas S., Gordo E. Influence of carbon content on the sinterability of an FeCr matrix cermet reinforced with TiCN. Int. J. Refract Metal Hard Mater. 2013, 36:283-288.
63. Kim Y.K., Shim J.-H., Cho Y.W., Yang H.-S., Park J.-K. Mechanochemical synthesis of nanocomposite powder for ultrafine (Ti,Mo)-Ni cermet without core-rim structure. Int. J. Refract Metal Hard Mater. 2004, 22:193-196.
64. Lin N., Wu C., He Y., Zhang D. Effect of Mo and Co additions on the microstructure and properties of WC-TiC-Ni cemented carbides. Int. J. Refract Metal Hard Mater. 2012, 30:107-113.
65. Liu N., Han C., Xu Y., Chao S., Shi M., Feng J. Microstructures and mechanical properties of nanoTiN modified TiC-based cermets for the milling tools. Mater. Sci. Eng., A 2004, 382:122-131.
66. Zhang X., Liu N. Microstructure, mechanical properties and thermal shock resistance of nano-TiN modified TiC-based cermets with different binders. Int. J. Refract Metal Hard Mater. 2008, 26:575-582.
67. Kaidash O. Special features of structural transformations in sintering a nanodispersed monophase powder of titanium nitride produced by plasmachemical synthesis. J. Superhard Mater. 2010, 32:236-249.
68. 0.5-based cermets: Effects of processing conditions on chemistry, microstructure and mechanical properties. Chem. Eng. J. 2013, 230:558-566.
69. Liu N., Yin W., Zhu L. Effect of TiC/TiN powder size on microstructure and properties of Ti(C,N)-based cermets. Mater. Sci. Eng., A 2007, 445:707-716.
70. Han C., Kong M. Fabrication and properties of TiC-based cermet with intra/intergranular microstructure. Mater. Des. 2009, 30:1205-1208.
71. Jia K., Fischer T., Gallois B. Microstructure, hardness and toughness of nanostructured and conventional WC-Co composites. Nanostruct. Mater. 1998, 10:875-891.
72. Shetty D., Wright I., Mincer P., Clauer A. Indentation fracture of WC-Co cermets. J. Mater. Sci. 1985, 20:1873-1882.
73. Wu P., Zheng Y., Zhao Y., Yu H. Effect of TaC addition on the microstructures and mechanical properties of Ti(C,N)-based cermets. Mater. Des. 2010, 31:3537-3541.
74. Zheng Q., Lim L.-C. Thermodynamics of TiC-and Ti(C,N)-based cermet processing prior to liquid phase sintering stage. Int. J. Refract Metal Hard Mater. 2011, 29:561-565.
75. Yuan Q., Zheng Y., Yu H. Synthesis of nanocrystalline Ti(C,N) powders by mechanical alloying and influence of alloying elements on the reaction. Int. J. Refract Metal Hard Mater. 2009, 27:121-125.
76. Pirso J., Viljus M., Letunovitš S., Juhani K., Joost R. Three-body abrasive wear of cermets. Wear 2011, 271:2868-2878.
77. Ghazali M., Rainforth W., Omar M. A comparative study of mechanically mixed layers (MMLs) characteristics of commercial aluminium alloys sliding against alumina and steel sliders. J. Mater. Process. Technol. 2008, 201:662-668.
78. Anasyida A., Daud A., Ghazali M. Dry sliding wear behaviour of Al-12Si-4Mg alloy with cerium addition. Mater. Des. 2010, 31:365-374.
79. Choi Y., Baik N., Lee J., Hong S., Hahn Y. Corrosion and wear properties of TiC/Ni-Mo composites produced by direct consolidation during a self-propagating high-temperature reaction. Compos. Sci. Technol. 2001, 61:981-986.
80. Wang N.W., Tong Y.W., Fang M.X. Influence of Mo content on the properties of TiC-based cermets. Adv. Mater. Res. 2013, 602:530-535.
81. 2C-Ni cermets. J. Mater. Sci. 1999, 34:3677-3684.