Surface modification of polylactic acid (PLA) by air atmospheric plasma treatment

European Polymer Journal

Volumn 58, Issue , 2014, Pages 23-33

  Jorda Vilaplana A ^a   Fombuena, V ^a   Garcia Garcia D ^a   Samper, M D ^a   Sanchez Nacher L ^a  

^a UNIVERSITAT POLITÈCNICA DE VALÈNCIA   (Spain)

Author keywords

Atmospheric plasma; Polylactic acid; Surface topography; Wettability

Indexed keywords

ADHESION; ATOMIC FORCE MICROSCOPY; FREE ENERGY; INFRARED SPECTROSCOPY; PLASMA APPLICATIONS; POLYESTERS; SCANNING ELECTRON MICROSCOPY; SUBSTRATES; SURFACE TOPOGRAPHY; WETTING; X RAY PHOTOELECTRON SPECTROSCOPY;

AIR-PLASMA TREATMENT; ATMOSPHERIC PLASMA TREATMENTS; ATMOSPHERIC PLASMAS; ENVIRONMENTALLY-FRIENDLY TECHNOLOGY; FOURIER TRANSFORMED INFRARED SPECTROSCOPY; MACROSCOPIC EFFECTS; POLY LACTIC ACID; SURFACE FREE ENERGY;

SURFACE TREATMENT;

EID: 84903974337     PISSN: 00143057     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.eurpolymj.2014.06.002     Document Type: Review

References (46)

1. L. Averous Biodegradable multiphase systems based on plasticized starch: a review J Macromol Sci - Polym Rev C44 2004 231 274
2. K. Madhavan Nampoothiri, N.R. Nair, and R.P. John An overview of the recent developments in polylactide (PLA) research Bioresour Technol 101 2010 8493 8501
3. V. Siracusa, P. Rocculi, S. Romani, and M. Dalla Rosa Biodegradable polymers for food packaging: a review Trends Food Sci Technol 19 2008 634 643
4. L. Belard, F. Poncin-Epaillard, P. Dole, and L. Averous Plasma-polymer coatings onto different biodegradable polyesters surfaces Eur Polymer J 49 2013 882 892
5. C. Zanden, M. Voinova, J. Gold, D. Moersdorf, I. Bernhardt, and J. Liu Surface characterisation of oxygen plasma treated electrospun polyurethane fibres and their interaction with red blood cells Eur Polymer J 48 2012 472 482
6. X. Ou, and M. Cakmak Comparative study on development of structural hierarchy in constrained annealed simultaneous and sequential biaxially stretched polylactic acid films Polymer 51 2010 783 792
7. X. Ou, and M. Cakmak Influence of biaxial stretching mode on the crystalline texture in polylactic acid films Polymer 49 2008 5344 5352
8. A. Sodergard, and M. Stolt Properties of lactic acid based polymers and their correlation with composition Prog Polym Sci 27 2002 1123 1163 (Pubitemid 34614061)
9. P. Slepicka, I. Michaljanicova, N.S. Kasalkova, Z. Kolska, S. Rimpelova, and T. Ruml et al. Poly-l-lactic acid modified by etching and grafting with gold nanoparticles J Mater Sci 48 2013 5871 5879
10. P. Slepicka, N.S. Kasalkova, L. Bacakova, Z. Kolska, and V. Svorcik Enhancement of polymer cytocompatibility by nanostructuring of polymer surface J Nanomater 2012
11. R. Prat, Y.J. Koh, Y. Babukutty, M. Kogoma, S. Okazaki, and M. Kodama Polymer deposition using atmospheric pressure plasma glow (APG) discharge Polymer 41 2000 7355 7360 (Pubitemid 30410665)
12. M. Martinez-Martinez, and M.D. Romero-Sanchez Strategies to improve the adhesion of rubbers to adhesives by means of plasma surface modification Eur Phys J - Appl Phys 34 2006 125 138 (Pubitemid 43972944)
13. K.T. Lee, J.M. Goddard, and J.H. Hotchkiss Plasma modification of polyolefin surfaces Pack Technol Sci 22 2009 139 150
14. M.D. Romero-Sanchez, and J.M. Martin-Martinez UV-ozone surface treatment of SBS rubbers containing fillers: influence of the filler nature on the extent of surface modification and adhesion J Adhes Sci Technol 22 2008 147 168 (Pubitemid 351535775)
15. F. Teraoka, M. Nakagawa, and M. Hara Surface modification of poly(L-lactide) by atmospheric pressure plasma treatment and cell response Dent Mater J 25 2006 560 565 (Pubitemid 44891333)
16. V. Fombuena-Borras, T. Boronat-Vitoria, O. Fenollar-Gimeno, L. Sanchez-Nacher, and D. Garcia-Sanoguera Optimization of atmospheric plasma treatment of LDPE sheets Dyna 87 2012 549 557
17. P. Slepicka, P. Jurik, Z. Kolska, P. Malinsky, A. Mackova, and I. Michaljanicova et al. A novel method for biopolymer surface nanostructuring by platinum deposition and subsequent thermal annealing Nanoscale Res Lett 2012 7
18. P. Slepicka, N.S. Kasalkova, E. Stranska, L. Bacakova, and V. Svorcik Surface characterization of plasma treated polymers for applications as biocompatible carriers Express Polym Lett 7 2013 535 545
19. P. Slepicka, S. Trostova, N.S. Kasalkova, Z. Kolska, P. Sajdl, and V. Svorcik Surface modification of biopolymers by argon plasma and thermal treatment Plasma Processes Polym 9 2012 197 206
20. J.M. Espana, D. Garcia, L. Sanchez, J. Lopez, and R. Balart Modification of surface wettability of sodium ionomer sheets via atmospheric plasma treatment Polym Eng Sci 52 2012 2573 2580
21. M. Pascual, R. Sanchis, L. Sanchez, D. Garcia, and R. Balart Surface modification of low density polyethylene (LDPE) film using corona discharge plasma for technological applications J Adhes Sci Technol 22 2008 1425 1442
22. M.R. Sanchis, V. Blanes, M. Blanes, D. Garcia, and R. Balart Surface modification of low density polyethylene (LDPE) film by low pressure O-2 plasma treatment Eur Polymer J 42 2006 1558 1568 (Pubitemid 43849708)
23. M.R. Sanchis, O. Calvo, O. Fenollar, D. Garcia, and R. Balart Surface modification of a polyurethane film by low pressure glow discharge oxygen plasma treatment J Appl Polym Sci 105 2007 1077 1085 (Pubitemid 47165503)
24. R.M. Sanchis, O. Calvo, L. Sanchez, D. Garcia, and R. Balart Enhancement of wettability in low density polyethylene films using low pressure glow discharge N-2 plasma J Polym Sci B - Polym Phys 45 2007 2390 2399 (Pubitemid 47328922)
25. L. Chvatalova, R. Cermak, A. Mracek, O. Grulich, A. Vesel, and P. Ponizil et al. The effect of plasma treatment on structure and properties of poly(1-butene) surface Eur Polymer J 48 2012 866 874
26. B. Gupta, K. Krishnanand, and B.L. Deopura Oxygen plasma-induced graft polymerization of acrylic acid on polycaprolactone monofilament Eur Polymer J 48 2012 1940 1948
27. P. Slepicka, T. Fidler, A. Vasina, and V. Svorcik Ripple-like structure on PLLA induced by gold deposition and thermal treatment Mater Lett 79 2012 4 6
28. M.C. Michalski, J. Hardy, and B.J.V. Saramago On the surface free energy of PVC/EVA polymer blends: comparison of different calculation methods J Colloid Interface Sci 208 1998 319 328 (Pubitemid 28563562)
29. A.M. Harris, and E.C. Lee Improving mechanical performance of injection molded PLA by controlling crystallinity J Appl Polym Sci 107 2008 2246 2255 (Pubitemid 351204641)
30. A.M. Harris, and E.C. Lee Heat and humidity performance of injection molded PLA for durable applications J Appl Polym Sci 115 2010 1380 1389
31. S. Inkinen, M. Stolt, and A. Sodergard Stability studies on blends of a lactic acid-based hot melt adhesive and starch J Appl Polym Sci 110 2008 2467 2474
32. L.T. Lim, R. Auras, and M. Rubino Processing technologies for poly(lactic acid) Prog Polym Sci 33 2008 820 852
33. J. Borris, A. Dohse, A. Hinze, M. Thomas, C.-P. Klages, and A. Moebius et al. Improvement of the adhesion of a galvanic metallization of polymers by surface functionalization using dielectric barrier discharges at atmospheric pressure Plasma Processes Polym 6 2009 S258 S263
34. N. De Geyter, R. Morent, T. Jacobs, F. Axisa, L. Gengembre, and C. Leys et al. Remote atmospheric pressure DC glow discharge treatment for adhesion improvement of PDMS Plasma Processes Polym 6 2009 S406 S411
35. L.C.V. Wielen, T. Elder, and A.J. Ragauskas Analysis of the topochemical effects of dielectric-barrier discharge on cellulosic fibers Cellulose 12 2005 185 196 (Pubitemid 41534579)
36. J. Abenojar, R. Torregrosa-Coque, M.A. Martinez, and J.M. Martin-Martinez Surface modifications of polycarbonate (PC) and acrylonitrile butadiene styrene (ABS) copolymer by treatment with atmospheric plasma Surf Coat Technol 203 2009 2173 2180
37. C.Q. Wang, and X.N. He Polypropylene surface modification model in atmospheric pressure dielectric barrier discharge Surf Coat Technol 201 2006 3377 3384
38. K. Wang, W. Wang, D. Yang, Y. Huo, and D. Wang Surface modification of polypropylene non-woven fabric using atmospheric nitrogen dielectric barrier discharge plasma Appl Surf Sci 256 2010 6859 6864
39. Y.J. Hwang, S. Matthews, M. McCord, and M. Bourham Surface modification of organic polymer films treated in atmospheric plasmas J Electrochem Soc 151 2004 C495 C501
40. J.K. Kim, H.S. Kim, and D.G. Lee Adhesion characteristics of carbon/epoxy composites treated with low- and atmospheric pressure plasmas J Adhes Sci Technol 17 2003 1751 1771
41. W.Y. Choi, C.M. Lee, and H.J. Park Development of biodegradable hot-melt adhesive based on poly-epsilon-caprolactone and soy protein isolate for food packaging system LWT-Food Sci Technol 39 2006 591 597 (Pubitemid 43340482)
42. N.-Y. Cui, D.J. Upadhyay, C.A. Anderson, B.J. Meenan, and N.M.D. Brown Surface oxidation of a Melinex 800 PET polymer material modified by an atmospheric dielectric barrier discharge studied using X-ray photoelectron spectroscopy and contact angle measurement Appl Surf Sci 253 2007 3865 3871 (Pubitemid 46178526)
43. Z. Zhou, X. Liu, B. Hu, J. Wang, D. Xin, and Z. Wang et al. Hydrophobic surface modification of ramie fibers with ethanol pretreatment and atmospheric pressure plasma treatment Surf Coat Technol 205 2011 4205 4210
44. Y. Takemura, N. Yamaguchi, and T. Hara Study on surface modification of polymer films by using atmospheric plasma jet source Jpn J Appl Phys 47 2008 5644 5647
45. R.M. Thurston, J.D. Clay, and M.D. Schulte Effect of atmospheric plasma treatment on polymer surface energy and adhesion J Plast Film Sheeting 23 2007 63 78 (Pubitemid 46813793)
46. G. Borcia, C.A. Anderson, and N.M.D. Brown The surface oxidation of selected polymers using an atmospheric pressure air dielectric barrier discharge. Part II Appl Surface Sci 225 2004 186 197