Materials and the Environment: Eco-informed Material Choice: Second Edition

Materials and the Environment: Eco-informed Material Choice: Second Edition

Volumn , Issue , 2012, Pages 1-616

  Ashby, Michael ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84902015804     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1016/C2010-0-66554-0     Document Type: Book

References (469)

1. Chapman, P.F., and Roberts, F. (1983), Metal resources and energy, Butterworth's Monographs in Materials, Butterworth and Co., Thetford, UK. ISBN 0-408-10801-0.
2. Chen, R.W., Navin-Chandra, D., Prinz, F.B. (1993), "Product design for recyclability: a cost benefit analysis," Proceedings of the IEEE International Symposium on Electronics and the Environment, Vol. 10-12, pp. 178-183. ISEE.1993.302813.
3. Guidice, F., La Rosa, G., and Risitano, A. (2006), Product design for the environment, CRC/Taylor and Francis, London, UK. ISBN 0-8493-2722-9.
4. Hammond, G., and Jones, C. (2010), Inventory of carbon and energy (ICE), Annex A: methodologies for recycling,The University of Bath, Bath, UK.
5. Henstock, M.E. (1988), Design for recyclability, Institute of Metals, London, UK.
6. Imhoff, D. (2005), Paper or plastic: searching for solutions to an overpackaged world, University of California Press. ISBN-13: 978-1578051175.
7. PAS 2050 (2008), Specification for the assignment of the life-cycle greenhouse gas emissions of goods and services, ICS code 13.020.40, British Standards Institution, London, UK. ISBN 978-0-580-50978-0.
8. Allwood, J.M., Ashby, M.F., Gutowski, T.G., and Worrell, E. (2011), "Material efficiency, a White Paper," Resources, Conservation, and Recycling, 55, pp 362-381
9. Alonso, E., Gregory, J., Field, F., and Kirchain, R. (2007), "Material availability and the supply chain: risks, effects and responses," Environmental Science and Technology, 41, pp 6649-6656.
10. Chapman, P.F. and Roberts, F. (1983), Metal resources and energy, Butterworths Monographs in Materials, Butterworth and Co., Thetford, UK. ISBN 0-408-10801-0.
11. Cullen, J.M. (2010), "Engineering fundamentals of energy efficiency," PhD Thesis, Engineering Department, Cambridge University, Cambridge, UK.
12. Cullen, J.M. and Allwood, J.M. (2010), "The efficient use of energy: tracing the global flow of energy form fuel to service," Energy Policy, 38, pp 75-81.
13. Harvey, L.D.D. (2010), Energy and the new reality 1: energy efficiency and the demand for energy services, Earthscan Ltd, London, UK. ISBN 978-1-84971-072-5.
14. Jaffe, R. and Price, J. (2010), "Critical Elements for New Energy Technologies," American Physical Society Panel on Public Affairs (POPA) study, American Physical Soc. USA.
15. McKelvey, V.E. (1974), Technology Review, MIT Press, (March/April) p 13.
16. MRS (2010), "Energy critical materials-securing materials for emerging technologies," A report by the APS Panel on Public Affairs & the Materials Research Society, American Physical Society, Washington, DC, USA.
17. Shell Petroleum (2007), How the energy industry works, Silverstone Communications Ltd., Towchester, UK. ISBN978-0-9555409-0-5.
18. Shiklomanov, I.A. (2010), "World water resources and their use," UNESCO International Hydrological Programme, www.webworld.unesco.org, accessed July 2010.
19. US Department of Energy (2010a), "Critical materials strategy," Office of Policy and International Affairs, materialstrategy@hq.doe.gov, www.energy.gov.
20. US Department of Energy (2010b), "Critical materials strategy for clean technology," www.energy.gov/news/documents/criticalmaterialsstrategy.pdf.
21. USGS Circular 2112 (2002), "Materials in the economy-material flows, scarcity and the environment," by L.W. Wagner, US Department of the Interior
22. USGS Mineral Information (2007), "Mineral yearbook" and "Mineral commodity summary," http://minerals.usgs.gov/minerals/pubs/commodity/.
23. Wolfe, J.A. (1984), Mineral resources-a world review, Chapman & Hall, London. ISBN 0-4122-5190-6.
24. Ayres, R.U., and Ayres, L.W., editors (2002), A handbook of industrial ecology, Edward Elgar, Cheltenham, UK. ISBN 1 84064 506 4.
25. Brundtland, G.H., Chairman (1987), Our common future, Report of the World Commission on Environment and Development, Oxford University Press, Oxford, UK. ISBN 0-19-282080-X.
26. Carson, R. (1962), Silent Spring, Houghton Mifflin, republished by Mariner Books (2002), New York, NY. ISBN 0-618-24906-0.
27. ELV (2000), "The Directive EC 2000/53 Directive on End-of-life vehicles (ELV)," Journal of the European Communities, L269, 21/10/2000, pp 34-42.
28. Hardin, G. (1968), "The tragedy of the commons," Science, 162, pp 1243-1248.
29. IPCC (2007), "Fourth Assessment Report of the IPCC," The Intergovernmental Panel on Climate Change, UNEP, www.ipcc.ch.
30. ISO 14040 (1998), Environmental management-Life-cycle assessment-Principles and framework.
31. ISO 14041 (1998), Goal and scope definition and inventory analysis.
32. ISO 14042 (2000), Life-cycle impact assessment.
33. ISO 14043 (2000), Life-cycle interpretation, International Organization for Standardization, Geneva, Switzerland.
34. Meadows D.H., Meadows D.L., Randers, J., and Behrens, W.W. (1972), The limits to growth, Universe Books, New York, USA.
35. National Highway Traffic Safety Administration (NHTSA) (2011), "CAFE Overview," www.nhtsa.gov/cars/rules/cafe/overview.
36. PAS 2050 (2008), "Specification for the assignment of the life-cycle greenhouse gas emissions of goods and services," ICS code 13.020.40, British Standards Institution, London, UK. ISBN 978-0-580-50978-0.
37. RoHS (2002), The Directive EC 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, European Commission, Strasbourg, France.
38. WEEE (2002), The Directive EC 2002/96 on Waste electrical and electronic equipment (WEEE), Journal of the European Communities 37, 13/02/2003, pp 24-38.
39. GaBi 4 (2008), PE International, www.gabi-software.com/.
40. Hammond, G. and Jones, C. (2010), "Inventory of carbon and energy (ICE), Annex A: methodologies for recycling," The University of Bath, Bath, UK.
41. ISO 14040 (1998), Environmental management-Life-cycle assessment-Principles and framework.
42. ISO 14041 (1998), Goal and scope definition and inventory analysis.
43. ISO 14042 (2000), Life-cycle impact assessment.
44. ISO 14043 (2000), Life-cycle interpretation, International Organization for Standardization, Geneva, Switzerland.
45. Matthews, B. (2011), "Java Climate Model," with UCL Louvain-la-neuve, KUP Bern, DEA Copenhagen, UNEP/GRID Arendal, http://chooseclimate.org. Accessed December 2011.
46. MEEUP method (2005), VHK, Delft, Netherlands, www.pre.nl/EUP/.
47. PAS 2050 (2008), "Specification for the assignment of the life-cycle greenhouse gas emissions of goods and services," ICS code 13.020.40, British Standards Institution, London, UK. ISBN 978-0-580-50978-0.
48. SimaPro (2008), Pré Consultants, www.pre.nl.
49. The Nature Conservancy (2011), "The carbon footprint calculator," www.nature .org/initiatives/climatechange/calculator/. Accessed December 2011.
50. Ashby, M. F. (2011), Materials selection in mechanical design, 4th edition, Butterworth Heinemann, Oxford, UK. ISBN 978-1-85617-663-7.
51. Ashby, M. F., Shercliff, H. R., and Cebon, D. (2009), Materials: engineering, science, processing and design, 2nd edition, Butterworth Heinemann, Oxford, UK. ISBN 978-1-85617-895-2.
52. Bader, M. G. (1977), "Composites applications and design," Proc. of ICCM-11, Gold Coast, Australia, Vol. 1: ICCM, London.
53. Bourell, D. L. (1997), "Decision matrices in materials selection," ASM Handbook Vol. 20, Materials Selection and Design, editor G.E. Dieter, ASM International, Materials Park, Ohio, USA, pp 291-296. ISBN 0-87170-386-6.
54. Dieter, G. E. (2000), Engineering design, a materials and processing approach, 3rd edition, McGraw-Hill, New York, USA, pp 150-153, 255-257. ISBN 0-07-366136-8.
55. Field, F. R. and de Neufville, R. (1988), "Material selection-maximizing overall utility," Metals and Materials, June, pp 378-382.
56. Goicoechea, A., Hansen, D. R., and Druckstein, L. (1982), Multi-objective decision analysis with engineering and business applications, Wiley, New York, NY, USA.
57. Keeney, R. L. and Raiffa, H. (1993), Decisions with multiple objectives: preferences and value tradeoffs, 2nd edition, Cambridge University Press, Cambridge, UK. ISBN 0-521-43883-7.
58. Australian government technical publications, building materials (2010), www.yourhome.gov.au/technical/pubs/fs49.pdf.
59. Azapagic, A., Perdan, S., and Clift, R. (Editors) (2004), Sustainable development in practice, John Wiley, Chichester, UK. ISBN 0-470-85609-2.
60. Baillie, C. (Editor) (2004), Green composites, Woodhead Publishing Ltd., London, UK. ISBN-13: 978-1855737396.
61. Coulter, S., Bras, B., and Foley, C. (1995), A lexicon of green engineering terms, Proc. ICED 95, Prague, CZ, pp 1-11.
62. Daly, H. (1990), "Toward some operational principles of sustainable development," Ecological Economics, 2, pp 1-6.
63. Dasgupta, P. (2010), "Nature's role in sustaining economic development," Phil. Trans. Roy. Soc. B, 365, pp 5-11.
64. Furan (2010), www.biocomp.eu.com/uploads/04_THERMOSET_BIOPOLYMER_MATERIALS-TFC.pdf.
65. Geiser, K. (2001), Materials matter: towards a sustainable materials policy, The MIT Press, Cambridge, MA, USA. ISBN 0-262-57148-X.
66. Guidice, F., La Rosa, G., and Risitano, A. (2006), Product design for the environment, CRC/Taylor and Francis, London, UK. ISBN 0-8493-2722-9.
67. Imhoff, D. (2005), Paper or plastic: searching for solutions to an overpackaged world, University of California Press, Berkeley, CA, USA. ISBN-13: 978-1578051175.
68. Lovelock, J. (2000), Gaia, a new look at life on earth, Oxford University Press, Oxford, UK. ISBN 0-19-286218-9.
69. MacKay, D. J. C. (2008), "Sustainable energy-without the hot air," Department of Physics, Cambridge University, Cambridge, UK. www.withouthotair.com/ Accessed December 2011.
70. Maniatidis, V. and Walker, P. (2003), "A review of rammed earth construction," Natural Building Technology Group, Department of Architecture & Civil Engineering, University of Bath, Bath, UK. http://people.bath.ac.uk/abspw/rammedearth/review.pdf. Accessed December 2011.
71. Nielsen, R. (2005), The little green handbook, Scribe Publications Pty. Ltd., Carlton North, Victoria, Australia. ISBN 1-9207-6930-7.
72. PROSPECT (Version 2.1) (1995), Oxford Forestry Institute, Department of Plant Sciences, Oxford University, Oxford, UK. The full database can be downloaded from www.plants.ox.ac.uk/ofi/prospect/index.htm. Accessed December 2011.
73. Schlösser, T., Gayer, U., and Karrer, G. (1999), Technischer Bericht 0003-98 Daimler-Chrysler Gmbh, Stuttgart, Germany.
74. Schmidt-Bleek, F. (1997), How much environment does the human being need-factor 10-the measure for an ecological economy, Deutscher Taschenbuchverlag, Munich, Germany. ISBN 3-936279-00-4.
75. von Weizsäcker, E., Lovins, A. B., and Lovins, L. H. (1997), Factor four: doubling wealth, halving resource use, Earthscan Publications, London, UK. ISBN 1-85383-406-8; ISBN-13: 978-1-85383406-6.
76. WCED (1987), Report of the World Commission on the Environment and Development, Oxford University Press, Oxford, UK.
77. Wool, R. P. and Sun, X. S. (2005), Bio-based polymers and composites, Elsevier, Amsterdam, Netherlands. ISBN 0-12-763952-7.
78. Woolley, T. (2006), Natural building-A guide to materials and techniques, The Crowood Press Limited, Ramsbury, UK. ISBN 1-861-26841-6.
79. Allwood, J.M., Cullen, J.M., Carruth,M.A., Cooper, D.R., McBrien, M., Milford, R.L., Moynihan, M., and Patel, A.C.H. (2012), Sustainable materials: with both eyes open, UIT Cambridge, Cambridge, UK. ISBN 978-1906860059.
80. Allwood, J.M., Ashby, M.F., Gutowski, T.G., and Worrell, E. (2011), "Material efficiency, a White Paper," Resources, Conservation and Recycling, 55, pp 362-381.
81. Allwood, J.M., Cullen, J.M., Carruth, M.A., Milford, R.L., Patel, A.C.H., Moynihan, M., Cooper, D.R., and McBrien, M. (2011), Going on a metal diet-using less liquid metal to deliver the same services in order to save energy and carbon, University of Cambridge, Cambridge, UK. ISBN 978-0-903428-32-3.
82. Allwood, J.M., Cullen, J.M., Cooper D.R., Milford, R.L., Patel, A.C.H., Moynihan, M., Carruth, M.A., and McBrien, M. (2011), Conserving our metal energy, University of Cambridge, Cambridge, UK. ISBN 978-0-903428-30.
83. Ashby, M.F. and Johnson, K. (2009), Materials and design, the art and science of material selection in product design, 2nd edition, Butterworth Heinemann, Oxford, UK. ISBN978-1-85617-497-8.
84. Bendsoe, M.P. and Sigmund, O. (2003), Topology optimization: theory, methods and applications, 2nd edition, Springer Verlag. ISBN: 978-3540429920
85. Eggert R.G., Carpenter, A.S., Freiman, S.W., Graedel, T.E., Meyer, D.A., and McNulty, T.P. (2008), Minerals, critical minerals and the US economy, National Academy Press, Washington, DC, USA.
86. Geiser, K. (2001), Materials matter: towards a sustainable materials policy, MIT Press, Cambridge, MA, USA. ISBN 0-262-57148-X.
87. Gutowski, T.G., Sahni, S., Boustani, A., and Graves, S.C. (2011), "Remanufacturing and energy savings," Environmental Science and Technology, Vol. 55, pp. 362-381, America Chemical Society.
88. Hertwich, E. G. (2005), "Consumption and the rebound effect: an industrial ecology perspective," Journal of Industrial Ecology, 9, pp 85-98.
89. IEA (International Energy Agency) (2007), "Tracking industrial energy efficiency and CO2 emissions," OECD/IEA, Paris, France.
90. IEA (International Energy Agency) (2008), "Energy technology perspectives 2008: scenarios & strategies to 2050," OECD/IEA, Paris, France.
91. Loader, M. (2008), "Driving sustainability," Materials World, 16, pp 30-32.
92. Lomberg, B. (2001), The sceptical environmentalist-measuring the real state of the world, Cambridge University Press, Cambridge, UK. ISBN 0-521-01068-3.
93. Lomberg, B., editor (2010), Smart solutions to climate change: comparing costs and benefits, Cambridge University Press, Cambridge, UK. ISBN 978-0-52113-856-7.
94. MacKay, D.J.C. (2008), Sustainable energy-without the hot air, UIT Press, Cambridge, UK, and www.withouthotair.com/. ISBN 978-0-9544529-3-3.
95. Pimm, S.L. (2001), The world according to Pimm: a scientist audits the earth, McGraw-Hill, New York, NY, USA. ISBN 0-07-137490-6.
96. Sigmund, O. (2000), "Topology optimization: a tool for the tailoring of structures and materials," Philosophical Transactions of the Royal Society A, 358, pp 211-227.
97. Szargut, J. (1989), "Chemical exergies of the elements," Applied Energy 32, pp 269-286.
98. USGS (2010), "Mineral commodity summaries 2010," U.S. Geological Survey. minerals.usgs.gov/minerals/pubs/mcs/2010/mcs2010.pdf. Accessed December 2011.
99. Delmonte, J. (1985), Origins of materials and processes, Technomic Publishing Company, PA, USA. ISBN 87762-420-8.
100. Flannery, T. (2010), Here on earth, The Text Publishing Company, Victoria, Australia. ISBN 978-1-92165-666-8.
101. Hamilton, C. (2010), Requiem for a species: why we resist the truth about climate change, Allen and Unwin, NSW, Australia. ISBN 978-1-74237-210-5.
102. Kent, R. (2009), "Plastics timeline," www.tangram.co.uk.TL-Polymer_Plastics_Timeline.html/.
103. Lomberg, B., editor (2010), Smart solutions to climate change: comparing costs and benefits, Cambridge University Press, Cambridge, UK. ISBN 978-0-52113-856-7.
104. Lovelock, J. (2009), The vanishing face of Gaia, Penguin Books, Ltd., London, UK. ISBN 978-0-141-03925-1.
105. Malthus, T.R. (1798), "An essay on the principle of population," London, Printed for Johnson, St. Paul's Church-yard. www.ac.wwu.edu/Bstephan/malthus/malthus.
106. Material Designs (2011), "A timeline of plastic," http://materialdesigns.wordpress.com/2009/08/06/a-timeline-of-plastics/.
107. Meadows, D.H., Meadows, D.L., Randers, J., and Behrens, W.W. (1972), The limits to growth, Universe Books, New York, NY, USA.
108. Meadows, D.H., Meadows, D.L., and Randers, J. (1992), Beyond the limits, Earthscan, London, UK. ISSN 0896-0615.
109. Nielsen, R. (2005), The little green handbook, Scribe Publications Pty Ltd., Carlton North, Victoria, Australia. ISBN 1-920769-30-7.
110. Plimer, I. (2009), Heaven and Earth-Global warming: the missing science, Connor Publishing, Ballam, Victoria, Australia. ISBN 978-1-92142-114-3.
111. Ricardo, D. (1817), "On the principles of political economy and taxation," John Murray, London, UK. www.econlib.org/library/Ricardo/ricP.html.
112. Schmidt-Bleek, F. (1997), How much environment does the human being need-factor 10-the measure for an ecological economy, Deutscher Taschenbuchverlag, Munich, Germany. ISBN 3-936279-00-4.
113. Singer, C., Holmyard, E.J., Hall, A.R., Williams, T.I., and Hollister-Short, G., editors (1954-2001), A history of technology (21 volumes), Oxford University Press, Oxford, UK. ISSN 0307-5451.
114. Tylecoate, R.F. (1992), A history of metallurgy, 2nd edition, The Institute of Materials, London, UK. ISBN 0-904357-066.
115. USGS (2002), Circular 2112, "Materials in the economy-material flows, scarcity and the environment," by L.W. Wagner, US Department of the Interior. www.usgs.gov.
116. von Weizsäcker, E., Lovins, A.B., and Lovins, L.H. (1997), Factor four: doubling wealth, halving resource use, Earthscan, London, UK. ISBN 1-85383-406-8; ISBN-13: 978-1-85383406-6.
117. Aggregain (2007), The Waste and Resources Action Program (WRAP), www.wrap.org.UK. ISBN 1-84405-268-0.
118. Allwood, J.M., Laursen, S.E., de Rodriguez, C.M., and Bocken, N.M.P. (2006), Well dressed? The present and future sustainability of clothing and textiles in the United Kingdom, University of Cambridge, Cambridge, UK. ISBN 1-902546-52-0.
119. "Boustead Model 5" (2007), Boustead Consulting, West Sussex, UK, www .boustead-consulting.co.uk. Accessed December 2011.
120. "Eco-indicator "(1999), PRé Consultants, Amersfoort, Netherlands, www.pre.nl/eco-indicator99/eco-indicator_99.htm. Accessed December 2011.
121. EPS (1992), "The EPS enviro-accounting method: an application of environmental accounting principles for evaluation and valuation in product design," Report B1080, IVL Swedish Environmental Research Institute, by Steen, B., and Ryding, S.O. Gothenburg, Sweden.
122. EU Directive on Energy Using Products (2005), "Directive 2005/32/EC of the European Parliament and of the Council of 6 July 2005 establishing a framework for the setting of ecodesign requirements for energy-using products and amending Council Directive 92/42/EEC and Directives 96/57/EC and 2000/55/EC of the European Parliament and of the Council." Strasburg, France
123. GaBi (2008), PE International, Leinfelden-Echterdingen, Germany. www.gabisoftware. com/. Accessed December 2011.
124. Goedkoop, M., Effting, S., and Collignon, M. (2000), "The Eco-indicator 99: A damage oriented method for Life-cycle Impact Assessment, Manual for Designers," www.pre.nl. Accessed December 2011.
125. Graedel, T.E., and Allenby, B.R. (2003), Industrial ecology, 2nd edition, Prentice Hall, NJ, USA. ISBN 978-0131252387.
126. Graedel, T.E. (1998), Streamlined Life-cycle Assessment, Prentice Hall, NJ, USA. ISBN 0-13-607425-1.
127. GREET (2007), Argonne National Laboratory and the US Department of Transportation, www.transportation.anl.gov/. Accessed December 2011.
128. Guidice, F. La Rosa, G., and Risitano, A. (2006), Product design for the environment, CRC/Taylor and Francis, London, UK. ISBN 0-8493-2722-9.
129. Heijungs, R. (editor) (1992), "Environmental life-cycle assessment of products: background and guide," Netherlands Agency for Energy and Environment, Amsterdam, the Netherlands.
130. "Idemat Software" version 1.0.1 (1998), Faculty of Industrial Design Engineering, Delft University of Technology, Delft, The Netherlands.
131. ISO 14040 (1998), Environmental management-Life-cycle assessment-Principles and framework.
132. ISO 14041 (1998), Goal and scope definition and inventory analysis.
133. ISO 14042 (2000), Life-cycle impact assessment.
134. ISO 14043 (2000), Life-cycle interpretation, International Organization for Standardization, Geneva, Switzerland.
135. Kyoto Protocol (1997), United Nations, Framework Convention on Climate Change. Document FCCC/CP1997/7/ADD.1, http://unfccc.int/resource/docs/convkp/kpeng.pdf. Accessed December 2011.
136. MEEUP Methodology Report, final (2005), VHK, Delft, Netherlands, www.pre.nl/EUP/. Accessed December 2011.
137. MIPS (2008), The Wuppertal Institute for Climate, Environment and Energy, www.wupperinst.org/en/projects/topics_online/mips/index.html Accessed December 2011.
138. National Academy of Engineering and National Academy of Sciences (1997), The Industrial Green Game: Implications for Environmental Design and Management, National Academy Press, Washington, DC, USA. ISBN 978-0309-0529-48.
139. PAS 2050 (2008), Specification for the assignment of the life-cycle greenhouse gas emissions of goods and services, ICS code 13.020.40, British Standards Institution, London, UK. ISBN 978-0-580-50978-0.
140. Saling, P, Kicherer, A., Dittrich, B.Wittlinger, R., Zombik, W., Schmidt, I., Schrott, W., and Schmidt, S. (2002), "Eco-efficiency analysis by BASF: the method," Int. J. Life-cycle Assess, 7, pp 203-218.
141. SETAC (1991), "A technical framework for life-cycle assessment," Fava, J.A., Denison, R., Jones, B., Curran, M.A., Vignon, B., Selke, S., and Barnum, J., (Eds.), Society of Environmental Toxicology and Chemistry, Washington, DC, USA.
142. SETAC (1993), "Guidelines for life-cycle assessment-a code of practice," Consoli, F., Fava J.A., Denison, R., Dickson, K., Kohin, T., and Vigon, B. (Eds.), Society of Environmental Toxicology and Chemistry, Washington, DC, USA.
143. Todd, J.A., and Curran, M.A. (1999), "Streamlined life-cycle assessment: a final report from the SETAC North America streamlined LCA workshop," Society of Environmental Toxicology and Chemistry, Washington, DC, USA.
144. Ashby, M.F., Shercliff, H.R. and Cebon, D. (2009), Materials: engineering, science, processing and design, 2nd edition, Butterworth Heinemann, Oxford, UK. ISBN-13: 978-1-85617-895-2.
145. Budinski, K.G. and Budinski, M.K. (2010), Engineering materials, properties, and selection, 9th edition, Prentice Hall, NY, USA. ISBN 978-0-13-712842-6.
146. Callister, W.D. (2006), Materials science and engineering, an introduction, 7th edition, John Wiley, New York, USA. ISBN 9-780-471-73696-7.
147. Charles, J.A., Crane, F.A.A. and Furness, J.A.G. (1997), Selection and use of engineering materials, 3rd edition, Butterworth Heinemann, Oxford, UK. ISBN 0-7506-3277-1.
148. Dieter, G.E. (1999), Engineering design, a materials and processing approach, 3rd edition, McGraw-Hill, New York, USA. ISBN: 9-780-073-66136-0.
149. Farag, M.M. (2008), Materials and process selection for engineering design, 2nd edition, CRC Press, Taylor and Francis, London, UK. ISBN 9-781-420-06308-0.
150. Kalpakjian, S. and Schmid, S.R. (2003), Manufacturing processes for engineering materials, 4th edition, Prentice Hall, Pearson Education, Inc., New Jersey, USA. ISBN 0-13-040871-9.
151. Shackelford, J.F. (2009), Introduction to materials science for engineers, 7th edition, Prentice Hall, NJ, USA. ISBN 978-0-13-601260-3.
152. Ashby, M.F. (2011), Materials selection in mechanical design, 4nd edition, Butterworth Heinemann, Oxford, UK. ISBN 0-7506-6168-2.
153. Chemsystems (2006), www.chemsystems.com. Accessed December 2011
154. Cheresources (2007), www.cheresources.com/polystyz5.shtml. Accessed December 2011
155. Geokem (2007), www.geokem.com/global-element-dist1.html. Accessed December 2011
156. International Rubber Study Group (IRSG) (2007), Vol 61 No 4/Vol 61 No 5, January/February.
157. Pilkington Group Ltd. (2007), Prescot Road, St. Helens, Merseyside UK.
158. US Geological Survey (2007), http://minerals.usgs.gov/minerals/pubs/commodity/. Accessed December 2011
159. Aggregain (2007), "The Waste and Resources Action Program (WRAP)," www.wrap.org.UK. ISBN 1-84405-268-0.
160. AMC (2006). Australian Magnesium Corporation, www.aph.gov.au/house/committee/environ/greenhse/gasrpt/Sub65-dk.pdf.
161. APME (1997, 1998, 1999, 2000), "Eco-profiles of the European plastics industry," Association of plastics manufacturers in Europe, Brussels, Belgium. www.lca.apme.org.
162. BCA (2007), "A carbon strategy for the cement industry," British Cement Association, www.cement-industry.co.uk. Accessed December 2011
163. Building Research Establishment (2006), BRE Environmental Profiles database, BRE Environment Division, BREEM Center, Watford UK.
164. Chapman, P.F. and Roberts, F. (1993), Metals resources and energy, Butterworths, London, UK. ISBN 0-408-10802-9.
165. Chemlink Australasia (1997), www.chemlink.com.au/mag&oxide.htm. Accessed December 2011.
166. ELCD (2008), lca.jrc.ec.europa.eu. Accessed December 2011. (A high-quality Life Cycle Inventory (LCI). Core data sets of this first version of the Commission's "European Reference Life Cycle Data System (ELCD)") Energy Information Association (2008), www.eia.doe.gov.
167. European Aluminium Association (2000), www.eaa.net.
168. GREET (2007), Argonne National Laboratory and the US Department of Transportation, www.transportation.anl.gov/.
169. Hammond, G. and Jones, C. (2011), "Inventory of Carbon and Energy (ICE)," Department of Mechanical Engineering, University of Bath, Bath, UK.
170. International Aluminum Institute (2000), "Life cyclse inventory of the worldwide aluminum industry," Part 1-automotive, www.world-aluminum.org/. Accessed December 2011.
171. Kemna, R., van Elburg, M., Li, W., and van Holsteijn, R. (2005), "Methodology study eco-design of energy-using products," Van Holsteijn en Kemna BV (VHK), Delf, Netherlands.
172. Kennedy, J. (1997), "Energy minimisation in road construction and maintenance," a Best Practice Report for the Department of the Environment, UK.
173. Lafarge Cement, Lafarge Cement Oxon, UK. Lawrence Berkeley National Laboratory report (2005), "Energy use and carbon dioxide emissions from steel production in China," LBNL-47205, April.
174. Lawson, B. (1996), "Building materials, energy and the environment: Towards ecologically sustainable development," RAIA, Canberra www.greenhouse.gov.au/yourhome/technical/fs31.htm.
175. Lime Technology (2007), www.limetechnology.co.uk/whylime.
176. MEEUP Methodology Report, final (2005), VHK, Delft, Netherlands. www.pre.nl/EUP/.
177. Ohio Department of Natural Resources, Division of Recycling (2005), www.dnr.state.oh.us/recycling/awareness/facts/tires/rubberrecycling.htm.
178. Pilz, H., Schweighofer, J. and Kletzer, E. (2005), "The contribution of plastic products to resource efficiency," Gesellschaft fur umfassende analysen (GUA), Vienna, Austria.
179. Schlesinger, M.E. (2007), Aluminum recycling, CRC Press, Taylor and Francis, London UK. ISBN 0-8493-9662-X.
180. Stiller, H. (1999), Material intensity of advanced composite materials, Wuppertal Institut fur Klima, Umvelt, Energie. ISSN 0949-5266.
181. Sustainable Concrete (2008), www.sustainableconcrete.org.uk/.
182. Szargut, J., Morris, D.R., Steward, F.R. (1988), Energy Analysis of Thermal Chemical and Metallurgical Processes, Hemisphere, New York, USA.
183. Szokolay, S.V. (1980), Environmental science handbook: for architects and builders, Lancaster: Construction Press, Broklyn, Victoria, Australia.
184. The Nickel Institute North America (2007), Nickel Institute, Toronto, Canada, www.nickelinstitute.org/. Accessed December 2011.
185. GREET (2007), Argonne National Laboratory and the US Department of Transportation, www.transportation.anl.gov/. Accessed December 2011.
186. London Platinum and Palladium Market (2006), www.lppm.org.uk. Accessed December 2011.
187. Lonmin Plc. (2005), 2005 Corporate Accountability Report, www.lonmin.com/. Accessed December 2011.
188. TEAM (2008), Tool for Environmental Analysis and Management, www.ecobalance.com/. Accessed December 2011.
189. EcoInvent (2010), EcoInvent Certre, Swiss Centre for Life Cycle Inventories, www .ecoinvent.org. Accessed December 2011.
190. IDEMAT (2009), The University of Delft, Delft, Netherlands.
191. Knapp, K.E. and Jester, T.L. (2005), "An empirical perspective on the energy payback time for photovoltaic modules," Solar 2000 Conference, Madison, Wisconsin.
192. Kuehr, R. and Williams, E., editors (2003), Computers and the environment: understanding and managing their impacts, Kluwer Academic Publishers and United Nations University, Aarhus, Denmark. ISBN 1-4020-1679-4.
193. MEEUP (2006), Kemna, R., van Elburg, M., Li W. and van Holsteijn, R., "Methodology study eco-design of energy-using products," Final report, VHK, Delft, Netherlands and the European Commission, Brussels, Belgium.
194. Cole, R.J. and Kernan, P.C. (1996), "Life-cycle energy use in office buildings," Building and Environment, 31, 4, pp 307-317.
195. Canadian Architect (2011), www.canadianarchitect.com/asf (accessed July 2011).
196. EcoInvent (2010), EcoInvent Certre, Swiss Centre for Life Cycle Inventories, www.ecoinvent.org.
197. Hammond, G. and Jones, C. (2011), "Inventory of Carbon and Energy (ICE)," Department of Mechanical Engineering, University of Bath, Bath, UK.
198. AZoM (2008), "A to Z of Materials," Journal of Materials Online, www.azom.com. Accessed December 2011.
199. Chiang, S.H. and Moeslein, D. (1978-1980), "Analysis of water use in nine industries," Parts 1-9, Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburg, PA, USA.
200. Davis, J.R. (1995), in ASM Specialty Handbook, ASM lnternationa1, Metals Park, Ohio, USA.
201. Implicit Price Deflators in National Currency and US Dollars (2006), United Nations statistics division, http://unstats.un.org/unsd/snaama/dnllist.asp. Accessed December 2011.
202. Lenzena, M. (2001), "An input-output analysis of Australian water usage," Water Policy 3, pp. 321-340.
203. Leontief, W. (1970), "Environmental repercussions and the economical structure: An input-output approach," The Review of Economics and Statistics, 52, 3 pp 262-271.
204. Pearce, F. (2006), "Earth: The parched planet," New Scientist, 2540, February.
205. Proops, J.L.R. (1997), "Input-output analysis and energy intensities: a comparison of some methodologies," Appl. Math. Modelling, 1, March.
206. Shiklomanov, I.A. (2010), "World water resources and their use,"UNESCO International Hydrological Programme, www.webworld.unesco.org (accessed July 2010.
207. UNESCO (2006), "World water assessment programme," United Nations educational scientific and cultural organization, www.unesco.org/water. Accessed December 2011.
208. Vela'zquez, T.E. (2006), "An input-output model of water consumption: analyzing intersectoral water relationships in Andalusia," Ecological Economics, 56, pp 226-240.
209. EPS (1993), "Life cycle analysis in product engineering," Environmental Report 49, Volvo Car Corp. Gothenburg, Sweden.
210. Goedkoop, M., Effting, S., and Collignon, M. (2000), "The Eco-indicator 99: A damage oriented method for Life Cycle Impact Assessment," Manual for Designers (14th April 2000) www.pre.nl. Accessed December 2011.
211. Idemat Software version 1.0.1 (1998), Faculty of Industrial Design Engineering, Delft University of Technology, Delft, The Netherlands.
212. Allen, D.K. and Alting, L. (1986), "Manufacturing processes," Brigham Young University, Provo, Utah, USA.
213. Boustead Model 4 (1999), Boustead Consulting, West Sussex, UK, www.boustead-consulting.co.uk. Accessed December 2011.
214. Ecoinvent Version 2.2 (2011), Competence Centre of the Swiss Federal Institute of Technology, Zürich, Switzerland. www.ecoinvent.org. Accessed December 2011.
215. European Reference Life Cycle Database (ELCD) of the Sustainability Unit of the Joint Research Centre of the European Commission (2010), Petten, the Netherlands.
216. MEEUP (2006), "Methodology study eco-design of energy-using products," Final report, VHK, Delft, Netherlands and the European Commission, Brussels, Belgium www.pre.nl/EUP/.
217. Abdul Samad, M. and Rio, R.S. (2001), J. Manufacturing Science and Engineering, Minimization of energy in the multipass rolling process, Vol. 123, pp 135-141.
218. Allen D.K. and Alting, L. (1986), "Manufacturing processes," student manual, Brigham Young University, Provo, Utah, USA.
219. Boustead Model 4 (1999), Boustead Consulting, West Sussex, UK, www.boustead-consulting.co.uk. Accessed December 2011.
220. Cast Metal Coalition (2005), http://cmc.aticorp.org/examples.html. Accessed December 2011. (Based on US National figures) Eco-Invent database (2007).
221. IDEMAT (2009), The University of Delft, Delft, Netherlands.-(Most of this data is from EcoInvent 07)
222. LBNL (2005), "Energy use and carbon dioxide emissions from steel production in China," Lawrence Berkeley National Laboratory report, LBNL-47205. April 2005.
223. MEEUP Methodology Report, Final (2005), VHK for European Commission, R. Kemna, M.van Elburg, W. Li, and R. van Holsteijn, Delftech Park, Delft, Netherlands.
224. US Department of Energy (1997), "Supporting industries energy and environmental profile," Energy Efficiency and Renewable Energy, Washington DC.
225. Allen D.K. and Alting, L. (1986), "Manufacturing processes," student manual, Brigham Young University, Provo, Utah, USA.
226. Boustead Model 4 (1999), Boustead Consulting, West Sussex, UK, www.bousteadconsulting.co.uk. Accessed December 2011.
227. Cast Metal Coalition (2005), http://cmc.aticorp.org/examples.html. Accessed December 2011. (Based on US National figures)
228. Cast Metal Coalition (2010), http://cmc.aticorp.org/datafactors.html. Accessed December 2011. (Energy data based on US national figures)
229. Dalquist, S. and Gutowski, T. (2004), "Life cycle analysis of conventional manufacturing techniques: die casting," MIT report LMP-MIT-03-12-09-2004.
230. Dalquist, S. and Gutowski, T. (2004), "Life cycle analysis of conventional manufacturing techniques: sand casting," Proc. 2004 ASME IMECE meeting, Anaheim, CA.
231. Energetics Inc. (1999), "Energy and Environmental Profile of the US Metal Casting Industry," http://www1.eere.energy.gov/industry/metalcasting/pdfs/profile.pdf. Accessed December 2011.
232. Eurecipe (2005), Reduced Energy Consumption in Plastics Engineering, from the 2005 European Benchmarking Survey of Energy Consumption, www.eurecipe.com.
233. LBNL (2005), "Energy use and carbon dioxide emissions from steel production in China," Lawrence Berkeley National Laboratory report, LBNL-47205. April 2005.
234. Branham, M. (2008), "Energy and materials use in the integrated circuit industry," M.S. Thesis, Department of Mechanical Engineering, MIT.
235. Ecoinvent Version 2.2 (2011), Competence Centre of the Swiss Federal Institute of Technology, Zürich, Switzerland. www.ecoinvent.org. Accessed December 2011.
236. Gutowski, T., Dahmus, J., Branham, M., and Jones, A.A. (2007), "A thermodynamic characterization of manufacturing processes," IEEE International Symposium on Electronics and the Environment, Orlando, FL, USA. May 2007.
237. Krishnan, N., Boyd, S., Somani, A., Raous, S., Clark, D. and Dornfeld, D. (2008), "A hybrid life cycle inventory of nano-scale semiconductor manufacturing," Environmental Science and Technology, 42, pp 3069-3075.
238. Murphy, C.F., Kenig, G.A., Allen, D., Laurent, J-P. and Dyer, D.E. (2003), "Development of parametric material, energy and emissions inventories for wafer fabrication in the semiconductor industry," Environ. Sci. Technol. 37, pp 5373-5382.
239. Cabuk (2010), www.cabuk1.co.uk.
240. Boustead Model 4 (1999), Boustead Consulting, West Sussex, UK, www.bousteadconsulting.co.uk. Accessed December 2011.
241. Ecoinvent Version 2.2 (2011), Competence Centre of the Swiss Federal Institute of Technology, Zürich, Switzerland. www.ecoinvent.org . Accessed December 2011.
242. Eurecipe (2005), "Reduced Energy Consumption in Plastics Engineering," from the 2005 European Benchmarking Survey of Energy Consumption, www.eurecipe.com. Accessed December 2011.
243. Gutowski, T.S., Branham, M., Dahmus, J.B., Jones, A.J. and Thiriez, A. (2009), "Thermodynamic analysis of resources used in manufacturing processes," Environmental Science and Technology, 43, pp 1584-1590.
244. Kemna R., van Elburg M., Li W. and van Holsteijn R. (2005) VHK, MEEUP Methodology Report, Final (2005), VHK for European Commission, Delftech Park, Delft, Netherlands, 28 Nov. 2005.
245. VHK (2005), MEEUP Methodology Report, Final (2005) VHK for European Commission, R. Kemna, M.van Elburg, W. Li, and R. van Holsteijn, Delftech Park, Delft, Netherlands, 28 Nov. 2005.
246. Kent, R. (2008), "Energy management in plastics and processing: Strategies, targets, techniques and tools." Plastics Information Direct, Bristol, England.
247. Suzuki, T. and Takahashi, J. (2005), The Ninth Japan International SAMPE symposium Nov. 29-Dec. 2.
248. Thiriez, A. (2006), "An environmental analysis of injection molding," Master's thesis, Massachusetts Institute of Technology, Cambridge, MA, USA.
249. Thiriez, A. and Gutowski, T. (2006), "An Environmental Analysis of Injection Molding," IEEE International Symposium on Electronics and the Environment, San Francisco, California, USA, May 8-11.
250. US Department of Energy (2008), "Supporting industries energy and environmental profile," www1.eere.energy.gov/industry/energy_systems/pdfs/si_profile.pdf.
251. US Environmental Protection Agency (1995), Washington, DC. www.epa.gov. Accessed December 2011.
252. Worrell, E., Galitsky, C., Masanet, E., Graus, W. (2008), "Energy efficiency improvements and cost saving opportunities for the glass industry: An energy star guide for energy and plant managers," Environmental Energy Technologies Division of Ernest Orlando Lawrence Berkeley National Laboratory.
253. Suzuki, T. and Takahashi, J. (2005), The Ninth Japan International SAMPE symposium Nov. 29-Dec. 2.
254. Draganescu, F., Gheorghe, M. and Doicin, C.V. (2003), "Models of machine tool efficiency and specific consumed energy," Jnl. of Materials Processing Technology, 141, pp 9-15.
255. Ghosh Chattopadhyay, S. and Paul S. (2008), "Modelling of specific energy requirement during high-efficiency deep grinding," International Journal of Machine Tools and Manufacture, 48: 11, pp 1242-1253.
256. Groover, M.P. (1999), Fundamentals of modern manufacturing, John Wiley & Sons, Inc, New York, NY, USA. ISBN 0-471-36680-3.
257. Gutowski, T.S., Branham, M.S., Dahmus, J.B., Jones, A.J. and Thiriez, A. (2009), "Thermodynamic analysis of resources used in manufacturing processes," Environ. Sc. Technol. 43, pp 1584-1590.
258. Gutowski, T. S., Dahmus, J.B., Branham, M.S. and,Jones, A.J. (2009), "A thermodynamic characterization of manufacturing processes," IEEE Symposium on Electronics and the Environment, Orlando, FL, USA.
259. Kurd, M. (2004), "The material and energy flow through abrasive water machining," BSc Thesis, Massachusetts Institute of Technology, cited by (Gu 09).
260. McGeough, J.A. (1988), Advanced methods of machining, Chapman and Hall, New York, NY, USA.
261. Todd, R.H., Allen, D.K. and Alting, L. (1994), "Manufacturing Processes Reference Guide," Welding. ISBN 0-8247-9914-3.
262. Groover, M.P. (1999), Fundamentals of Modern Manufacturing, John Wiley & Sons, Inc, New York, NY, USA. ISBN 0-471-36680-3.
263. Idemat (2005), "LCA software tool," Delft University of Technology. www.tudelft.nl.
264. MEEUP report (2005), Kemna, R., van Elburg, M., Li, W. and van Holsteijn, R., Delft Tech Park, Netherlands.
265. Misha, R.S. and Mahoney, M.W. (2007), Friction stir welding and processing, ASM International, Metals Park, Ohio, USA.
266. US Department of Energy (1997), Washington DC. www.doe.gov. Accessed December 2011.
267. Bookshar, D. (2001), Energy consumption of pneumatic and DC electric assembly tools, Stanley Assembly Technologies, Cleveland, OH, USA. www.stanleyassembly.com. Accessed December 2011.
268. Bradley, R. Griffiths, A., and Levitt, M. (1995), "Paints and coatings, adhesives and sealants," Construction Industry Research and Information Association (CIRIA), Vol. F, ISBN 8 6017 8161.
269. Hammond, G., and Jones, C. (2009), "Inventory of Carbon and Energy (ICE)," Department of Mechanical Engineering, University of Bath, Bath, UK.
270. BBC (2010), Paint calculator, www.bbc.co.uk/homes/diy/paintcalculator.shtml.
271. Bradley, R., Griffiths, A., and Levitt, M. (1995), "Paints and coatings, adhesives and sealants," Construction Industry Research and Information Association (CIRIA), Vol. F, ISBN 8 6017 8161.
272. Centre for Building Performance Research (2003), "EE & CO2 coefficients for New Zealand building materials," and "Table of embodied energy coefficients," at www.victoria.ac.nz/cbpr/documents/pdfs/ee-co2_report_2003.pdf and www.victoria.ac.nz/cbpr/documents/pdfs/ee-coefficients.pdf (viewed 19 October 2010).
273. Franklin Associates (2005), VRP (Vehicle Recycling Partnership) data for automotive painting provided by James Littlefield, private communication.
274. Geiger, O. (2010), "Embodied energy in strawbale houses," www.grisb.org/publications/pub33.htm. Accessed December 2011.
275. Groover, M.P. (1999), Fundamentals of Modern Manufacturing, John Wiley & Sons, Inc., New York, USA. ISBN 0-471-36680-3.
276. Hammond, G. and Jones, C. (2009), "Inventory of Carbon and Energy (ICE)," Department of Mechanical Engineering, University of Bath, Bath, UK.
277. Idemat Software version 1.0.1 (1998), Faculty of Industrial Design Engineering, Delft University of Technology, Delft, The Netherlands.
278. MEEUP report (2005), Kemna, R., van Elburg, M., Li, W. and van Holsteijn, R. Delft Tech Park, Delft, TheNetherlands.
279. Misha, R.S. and Mahoney, M.W. (2007), Friction stir welding and processing, ASM International, Metals Park, Ohio, USA.
280. US National Renewable Energy Laboratory (2010), www.nrel.gov.lci. Accessed December 2011.
281. Aggregain (2007), The Waste and Resources Action Program (WRAP), www.wrap.org.UK. ISBN 1-84405-268-0.
282. AMC (2006), Australian Magnesium Corporation, www.aph.gov.au/. Accessed December 2011.
283. Chemlink Australasia (1997), www.chemlink.com.au/. Accessed December 2011.
284. Geokem (2007), www.geokem.com/global-element-dist1.html. Accessed December 2011.
285. Hammond, G. and Jones, C. (2006), "Inventory of carbon and energy (ICE)," Dept. of Mechanical Engineering, University of Bath, Bath, UK.
286. International Aluminum Institute (2000), "Life cycle inventory of the worldwide aluminum industry," Part 1-automotive, www.world-aluminum.org/. Accessed December 2011.
287. Kemna, R., van Elburg, M., Li, W., and van Holsteijn, R. (2005), "Methodology study eco-design of energy-using products," Van Holsteijn en Kemna BV (VHK), Delft, The Netherlands.
288. Lafarge Cement (2007), Lafarge Cement UK, Chilton, Oxon, UK.
289. Lawson, B. (1996), "Building materials, energy and the environment," RAIA, Canberra www.greenhouse.gov.au/. Accessed December 2011.
290. Ohio Department of Natural Resources (2005), Division of Recycling, www.dnr.state.oh.us/. Accessed December 2011.
291. Pilz, H., Schweighofer, J., and Kletzer, E. (2005), "The contribution of plastic products to resource efficiency," Gesellschaft fur umfassende analysen (GUA), Vienna, Austria.
292. Schlesinger, M.E. (2007), Aluminum recycling, CRC Press, New York, USA. ISBN 0-8493-9662-X.
293. Sustainable Concrete (2008), www.sustainableconcrete.org.uk/.
294. The Nickel Institute North America (2007), Nickel Institute, Toronto, Canada www.nickelinstitute.org/. Accessed December 2011.
295. US Environmental Agency (2007), www.eia.doe.gov. Accessed December 2011.
296. US Geological Survey (2007), http://minerals.usgs.gov/. Accessed December 2011.
297. Waste on line (2007), www.wasteonline.org.uk/.
298. Abare (2009), http://abare.gov.au/interactive/09_ResearchReports/EnergyIntensity/htm/chapter_5.htm.
299. AggRegain (2006), CO2 emissions estimator tool, published by WRAP (Waste & Resources Action Programme), The Old Academy Banbury, UK, www.aggregain .org.uk.
300. Carbon Trust (2007), "Carbon footprint in the supply chain," www.carbontrust.co.uk/. Accessed December 2011.
301. Harvey, L.D.D. (2010), Energy and the new reality 1: energy efficiency and the demand for energy services, Earthscan Ltd, London, UK. ISBN978-1-84971-072-5.
302. IEA Scoreboard 2009 (2009), www.scribd.com/doc/53697399/34/Energyeffciency- in-freight-transport.
303. NREL (2010), National Renewable Energy Laboratory, www.nrel.gov/lci. Harvey, L.D.D. (2010), Energy and the new reality.
304. Weber, C.L. and Matthews, H.S. (2008), "Food miles and the relative impacts of food choices in the United States," Environ. Sci. Technol. 42, pp 3508-3513.
305. Green, J.E., Cottington, R.V., Davies, M., Dawes, W.N., Fielding, J.P., Hume, C.J., Lee, D.J., McClarty, J., Mans, K.D.R., Mitchell, K., and Newton, P.J. (2003), "Air travel-greener by design: the technology challenge," Report of the Technology Subgroup, www.greeenerbydesigh.org.uk. Accessed December 2011.
306. Manicore (2008), www.manicore.com/.
307. Transport Watch UK (2007), www.Transwatch.co.uk/. Accessed December 2011.
308. TRL UPR (1995), "Energy consumption in road construction and use," Transport Research Laboratory, UK.
309. Network Rail (2007), www.networkrail.co.uk/.
310. Shell Petroleum (2007), How the energy industry works, Silverstone Communications Ltd., Towchester, UK. ISBN978-0-9555409-0-5.
311. Bureau of Transport Statistics (2011), www.bts.gov/publications/national_transportation_statistics/html/table_04_25_m.html. Accessed December 2011.
312. Congressional Budget Office (1982), "Energy use in freight transportation," US Congress, Washington, DC, USA.
313. Henningsen, R.F. (2000), "Study of greenhouse gas emissions from ships," Norwegian Mariine Technology Research Institute (MARINTEK), Trondheim, and the International Maritime Organsation (IMO) London, UK.
314. International Chamber of Shipping (2005), International Shipping Federation, Annual review 2005, US Department of Transport, Maritime Administration, Pittsburgh, PA. www.marisec.org/. Accessed December 2011.
315. Shipping Efficiency (2010), www.shippingefficiency.org/. Accessed December 2011.
316. US Department of Transportation Maritime Administration (1994), "Environmental advantages of Inland Barge transportation." www.port.pittsburgh.pa.us/docs/eaibt.pdf. Accessed December 2011.
317. Boustead Model 5 (2007), Boustead Consulting, West Sussex, UK. www.bousteadconsulting.co.uk.
318. ELCD (2008), http://ca.jrc.ec.europa.eu/.
319. International Energy Agency (IEA) (2008), Electricity Information, IEA publications. ISBN 978-9264-04252-0.
320. Carbon neutral (2011), www.goeco.com.au. Accessed December 2011.
321. Garrido, N. and del Castillo, M.D.A. (2007), "Environmental evaluation of singleuse and reusable cups," Int. J. LCA, 12, pp. 252-256.
322. Imhoff, D. (2005), Paper or plastic: searching for solutions to an overpackaged world, University of California Press, Berkeley, CA. ISBN-13: 978-1578051175.
323. Ashby, M.F. (2011), Materials selection in mechanical design, 4th edition, Butterworth Heinemann: Oxford, UK, Chapter 4. ISBN 978-1-85617-663-7.
324. Ashby, M.F., Shercliff, H.R., and Cebon, D. (2009), Materials: engineering, science, processing and design, 2nd edition, Butterworth Heinemann: Oxford, UK. ISBN 978-1-85617-895-2.
325. Caceres, C.H. (2007), "Economical and environmental factors in light alloys automotive applications," Metallurgical and Materials Transactions, A. Vol 18, No. 7, pp. 1649-1662.
326. Calladine, C.R. (1983), Theory of Shell Structures, Cambridge University Press: Cambridge, UK. ISBN 0-521-36945-2.
327. Carslaw, H.S. and Jaeger, J.C. (1959), Conduction of Heat in Solids, 2nd Edition, Oxford University Press: Oxford, UK. ISBN 0-19-853303-9.
328. Hollman, J.P. (1981), Heat Transfer, 5th Edition, McGraw-Hill: New York, U.S.A. ISBN 0-07-029618-9.
329. MacKay, D.J.C. (2008), "Sustainable energy-without the hot air," Department of Physics, Cambridge University, Cambridge, UK. www.withouthotair.com/
330. Young, W.C. (1989), Roark's Formulas for Stress and Strain, 6th Edition, McGraw- Hill, New York, USA. ISBN 0-07-072541-1.
331. Andrews, J. and Jelley, N. (2007), Energy science: principles, technologies and impacts, Oxford University Press, Oxford, UK. ISBN 978-0-19-928112-1.
332. Boyle G. (editor) (2004), "Renewable energy," DE.158.
333. British Geological Survey (2011), "Risk list 2011," www.bgs.ac.uk/mineralsuk/statistics/riskList.html. Accessed December 2011.
334. Cullen, J.M. (2010), "Engineering fundamentals of energy efficiency," PhD thesis, Engineering Department, University of Cambridge, Cambridge, UK.
335. Fay, J.A. and Golomb, D.S. (2002), Energy and the environment, Oxford University Press, Oxford, UK. ISBN 0-19-515092-9.
336. Harvey, L.D.D. (2010), Energy and the new reality 1: energy efficiency and the demand for energy services, Earthscan Publishing, London, UK. ISBN 978-1-84971-072-5.
337. Harvey, L.D.D. (2010), Energy and the new reality 2: carbon-free energy supply, Earthscan Publishing, London, UK. ISBN 978-1-84971-073-2.
338. Hunt, W.H. (2010), "Linking transformational materials and processing for an energy efficient and low-carbon economy," The Minerals, Metals and Materials Society (TMS). www.energy.tms.org.
339. IAEA (1997), "Sustainable development and nuclear power," International Atomic Energy Agency, Vienna, Austria.
340. IEA (2008), International Energy Agency Electricity information 2008, OECD / IEA, Paris, France. ISBN 978-92-64-04252-0.
341. Lund, H. (2010), Renewable energy systems-the choice and modelling of 100% renewable solutions, Elsevier, Amsterdam, the Netherlands. ISBN 978-0-12-375028-0.
342. MacKay, D.J.C. (2009), Sustainable energy-without the hot air, UIT Publishers, Cambridge, UK. SBN 978-0-9544529-3-3 and www.withouthotair.com.
343. McFarland, E.L., Hunt, J.L., Campbell, J.L.E. (2007), Energy, physics and the environment, Thompson Publishers, UK. ISBN 1-426-82433-6.
344. Meyer, P.J. (2002), "Life cycle assessment of electricity generation systems and applications for climate change policy analysis," PhD Thesis, Fusion Technology Institute, University of Wisconsin Madison, Wisconsin.
345. Quaschning, V. (2010), Renewable energy and climate change, John Wiley, London, UK. ISBN 978-0-470-74707-0.
346. San Martin, R.L. (1989), "Environmental emissions from energy technology systems: the total fuel cycle," US Department of Energy, Washington, DC, USA.
347. Sorensen, B. (2004), Renewable energy-its physics, engineering, environmental impact, economics and planning, 3rd edition, Elsevier, Amsterdam, the Netherlands. ISBN 978-0-12-656135-1.
348. Tester, J.W., Drake, E.M., Driscole, M.J., Golay, M.W., and Peters, W.A. (2005), Sustainable energy-choosing among the options, MIT Press, Cambridge, MA, USA. ISBN 978-0-262-20153-7.
349. CCSA (2010), "About CCS, carbon capture and storage association," www.ccsassociation.org.uk (Accessed August 2010).
350. EPRI (2009), "Program on technology innovation: integrated generation technology options," Energy Technology Assessment Centre, Palo Alto, CA. http://my.epri.com/. Accessed December 2011.
351. Hondo, H. (2005), "Life cycle GHG emission analysis of power generation systems: Japanese case," Energy 30, pp 2042-2056.
352. IEA (2002), "Environmental and health impacts of electricity generation," www.ieahydro.org/reports/ST3-020613b.pdf (Accessed December 2011).
353. Kaplan, S. (2008), "Power plants: characteristics and costs," CRS Report for Congress, www.fas.org/sgp/crs/misc/RL34746.pdf (Accessed December 2011).
354. Mayer-Spohn, O., (2009), "Parametrised life cycle assessment of electricity generation in hard-coal-fuelled power plants with carbon capture and storage," Universitat Stuttgart, Stuttgart, Germany. http://elib.uni-stuttgart.de/opus/volltexte/2010/5031/pdf/100114_Dissertation_Mayer_Spohn_FB105.pdf (Accessed December 2011).
355. Meier P.J. (2002), "Life cycle assessment of electricity generation systems and applications for climate change policy analysis," University of Wisconsin, Madison, Wisconsin. http://fti.neep.wisc.edu/pdf/fdm1181.pdf (Accessed August 2010).
356. National Grid (2010), "Calorific value description," www.nationalgrid.com/uk/Gas/Data/help/opdata (Accessed August 2010).
357. NaturalGas.org (2010), "Overview of natural gas," http://naturalgas.org/overview/ overview.asp (Accessed December 2011).
358. White, S.W. and Kulcinski, G.L. (2000), "Birth to death analysis of the energy payback ratio and CO2 gas emission rates from coal, fission, wind and DTfusion electrical power plants," Fusion Engineering and Design, 48, pp 473-481.
359. Andrews, J. and Jelley N. (2007), Energy science, Oxford University Press, Oxford, UK. ISBN 978-0-19-928112-1.
360. British Energy (2005), "Environmental Product Declaration of Electricity from Torness Nuclear Power Station," www.british-energy.com (Accessed August 2010).
361. Environmental Science and Technology (2008) Vol. 42, pp 2624-2630, http://ec.europa.eu/environment/integration/research/newsalert/pdf/109na4.pdf (Accessed August 2010).
362. Glasstone, S. and Sesonske, A. (1994), Nuclear reactor engineering, 4th edition, Chapman and Hall, New York, NY, USA. ISBN 0-412-98521-7.
363. Kaplan, S. (2008), "Power plants: characteristics and costs," CRS Report for Congress, www.fas.org (Accessed September 2010).
364. Rashad, S.M. and Hammad, F.H. (2000), "Nuclear power and the environment: comparative assessment of the environmental and health impacts of electricitygenerating systems," Applied Energy, 65, pp 211-229.
365. Roberts, J.T.A. (1981), Structural materials in nuclear power systems, Plenum Press, New York, NY, USA. ISBN 0-306-40669-1.
366. Storm van Leeuwen, J.W. (2007), "Nuclear power-the energy balance," Ceedata Consultancy, www.stormsmith.nl/report20071013/partF.pdf (Accessed December 2011).
367. Voorspools, K.R., Brouwers, E.A., and D'Haeseleer, W.D. (2000), "Energy content and indirect greenhouse gas emissions embedded in 'emission-free' power plants: results for the Low Countries," Applied Energy, 67 pp 307-330.
368. White, S.W. and Kulcinski, G.L. (1998a), "Birth to death analysis of the energy payback ratio and CO2 gas emission rates from coal, fission, wind and DTfusion electrical power plants," Fusion Engineering and Design, 48 (248) pp 473-481.
369. White, S.W. and Kulcinski, G.L. (1998b), "Energy Payback Ratios and CO2 Emissions Associated with the UWMAK-I and ARIES-RS DT-Fusion Power Plants, Fusion Technology Institute, Madison, Wisconsin, http://fti.neep.wisc.edu/pdf/fdm1085. pdf (Accessed August 2010).
370. WISE Uranium project (2009), "Nuclear fuel energy balance calculator," www.wise-uranium.org/nfce (Accessed August 2010).
371. World Nuclear Association (2009), "Nuclear power reactors," www.world-nuclear .org/info/inf32 (Accessed August 2010).
372. AMP Blogs network (2009), "New solar panel materials studied," www.aboutmyplanet.com/alternative-energy/new-solar-panel-materials-studied/ (Accessed August 2010).
373. Ardente, F., Beccali, G., Cellura, M., and Lo Brano, V. (2005), "Life cycle assessment of a solar thermal collector," Renewable Energy 30 pp 1031-1054.
374. Bankier, C. and Gale, S. (2006), "Energy payback of roof mounted photovoltaic cells," The environmental engineer, www.rpc.com.au/pdf/Environmental_Engineer_Summer_ 06_paper_2.pdf (Accessed August 2010).
375. Blakers, A. and Weber, K. (2000), "The energy intensity of photovoltaic systems," Centre for Sustainable Energy Systems, Australian National University, www.ecotopia.com (Accessed August 2010).
376. Carbon Free Energy Solutions (2010), "Philadelphia solar modules," www.carbonfreeenergy.co.uk (Accessed August 2010).
377. Denholm, P., Margolis, R.M., Ong, S., and Roberts, B. (2010), "Sun gets even," National Renewable Energy Laboratory, http://newenergynews.blogspot.com/2010/02/sun-gets-even.html (Accessed August 2010).
378. Energy Development Co-Operative Limited (2010), "Solar panels-solar PV modules," www.solar-wind.co.uk/solar_panels (Accessed August 2010).
379. Genersys Plc. (2007), "1000-10 Solar Panel Technical Datasheet," www.genersyssolar.com (Accessed August 2010).
380. Ginley, D., Green, M.A., and Collins, R. (2008), "Solar energy conversion towards 1 terawatt," MRS Bulletin, 33, 4.
381. Intelligent Energy Solutions (2010), "Solar panel cost," www.intelligentenergysolutions.com (Accessed August 2010).
382. Kannan, R., Leong, K.C., Osman, R., Ho, H.K., and Tso, C.P. (2005), Life cycle assessment study of solar PV systems: An example of a 2.7 kWp distributed solar PV system in Singapore, Elsevier, Amsterdam, the Netherlands.
383. Keoleian, G.A. and Lewis, G. (1997), "Application of life cycle energy analysis to Photovoltaic Module Design," Progress in Photovoltaics: Research and Applications, 5. http://deepblue.lib.umich.edu (Accessed August 2010).
384. Knapp, K.E. and Jester, T.L. (2000), "An empirical perspective on the energy payback time for photovoltaic modules," Solar 2000 Conference, Madison, Wisconsin, USA.
385. Koroneos, C., Stylos, M., and Moussiopoulos N. (2005), "LCA of Multicrystalline silicon photovoltaic systems," Aristotle University of Thessaloniki, Thessalonika, Greece.
386. Lewis, G.M. and Keoleian, G.A. (1997), "Life cycle design of amorphous silicon photovoltaic modules," EPA. www.umich.edu/Bnppcpub/research/pv.pdf (Accessed August 2010).
387. Meier, P.J. (2002), "Life cycle assessment of electricity generation systems and applications for climate change policy analysis," University of Wisconsin, Madison, Wisconsin, http://fti.neep.wisc.edu/pdf/fdm1181.pdf (Accessed August 2010).
388. Sanyo (2009), "HIT photovoltaic module," www.shop.solar-wind.co.uk (Accessed August 2010).
389. Sharp (2008), "ND Series, 210W/200W," Photovoltaic solar panels, www.shop.solarwind.co.uk/acatalog/Sharp_Solar_Panel_ND_210E1F_Brochure.pdf (Accessed August 2010).
390. Solar Systems (2010), "Projects," Mildura solar farm, www.solarsystems.com.au/ projects (Accessed August 2010).
391. Tritt, T.M., Bottner, H., and Chen, L. (2008), "Thermoelectrics: direct solar thermal energy conversion," MRS Bulletin, 33, 4.
392. US Department of Energy (2011), "Concentrating solar power," www1.eere.energy.gov/solar/csp_program.html. Accessed December 2011.
393. US Department of Energy (2011), "Dish/engine systems for concentrating solar power," www.eere.energy.gov/basics/renewable_energy/dish_engine.html. Accessed December 2011.
394. US Department of Energy (2011), "Power tower systems for concentrating solar power," www.eere.energy.gov/basics/renewable_energy/power_tower.html. Accessed December 2011.
395. Vidal, J. (2008), "World's biggest solar farm at centre of Portugal's ambitious energy plan," The Guardian: Environment, Renewable Energy, www.guardian.co.uk/environment/2008/jun/06/renewableenergy.alternativeenergy (Accessed August 2010).
396. Viebahn, P., Kronshage, S., Trieb, F., and Lechon Y. (2004), "Final report on technical data, costs, and life cycle inventories of solar thermal power plants," New Energy Externalities Developments for Sustainability (NEEDS) project, European Commission Sixth Framework Programme, www.needs-project.org/docs/results/RS1a/RS1a%20D12.2%20Final%20report%20concentrating%20solar%20thermal%20power%20plants.pdf (Accessed August 2010).
397. Woodall, B. (2006), "World's biggest solar farm planned for New Mexico," Planet Ark, www.planetark.com/dailynewsstory.cfm/newsid/36162/story.htm (Accessed August 2010)
398. Karakoussis, V., Brandon, N.P., Leach, M., and van der Vorst, R. (2001), "The environmental impact of manufacturing planar and tubular solid oxide fuel cells," J. Power Sources, 101, pp 10-26.
399. US Department of Energy (2011), "Fuel cells," www1.eere.energy.gov/hydrogenandfuelcells/fuelcells/fc_types.html. Accessed December 2011.
400. Van Rooijen, J. (2006), "A life-cycle assessment of the PureCell stationary fuel cell system: providing a guide for environmental improvement," Report No. CSS06-09, Center for Sustainable Systems, University of Michigan, Ann Arbor, MI.
401. Ardente, F., Beccali, M., Cellura, M., and Lo Brano, V. (2008), "Energy performances and life cycle assessment of an Italian wind farm." Renewable and Sustainable Energy Reviews, Vol. 12(1), pp 200-217.
402. Hood, C.F. (2009), "The history of carbon fibre," www.carbon-fiber-hood.net/ cf-history (Accessed August 2010).
403. Crawford, R.H. (2009), "Life cycle energy and greenhouse emissions analysis of wind turbines and the effect of size on energy yield," Renewable and Sustainable Energy Reviews 13: 9, pp 2653-2660.
404. Danish Wind Industry Association (2003), "What does a wind turbine cost?," http://guidedtour.windpower.org (Accessed August 2010).
405. EWEA (2003), "Costs and prices," Wind Energy-The Facts, Volume 2, www.ewea.org (Accessed August 2010).
406. Hau, E. (2006), Wind turbines: fundamentals, technologies, application, economics, 2nd Edition, Springer, New York, NY. ISBN 3-540-24240-6.
407. Hayman, B., Wedel-Heinen, J., and Brondsted, P. (2008), "Materials challenges in present and future wind energy," MRS Bulletin, 33, 4.
408. Martinez, E., Sanz, F., Pellegrini, S., Jimenez, E., and Blanco, J. (2007), "Life cycle assessment of a multi-megawatt wind turbine," University of La Rioja, Spain. www.assemblywales.org (Accessed August 2010).
409. McCulloch, M., Raynolds, M., Laurie, M. (2000), "Life cycle value assessment of a wind turbine," Pembina Institute, http://pubs.pembina.org/reports/windlcva.pdf (Accessed August 2010).
410. Musgrove, P. (2010), Wind power, Cambridge University Press, ISBN: 978-0-521-74763-9.
411. Nalukowe, B.B., Liu, J., Damien, W., and Lukawski, T. (2006), "Life cycle assessment of a wind turbine," www.infra.kth.se/fms/utbildning/lca/projects%202006/Group%2007%20(Wind%20turbine).pdf (Accessed August 2010).
412. Vestas (2008), "V82-1,65 MW," Wind turbine brochure, Vestas Wind Systems A/S, Aarhus, Denmark. www.Vestas.com. Accessed December 2011.
413. Vindmølleindustrien (1997), "The energy balance of modern wind turbines," Wind Power Note, 16, July. www.apere.org/manager/docnum/doc/doc1249_971216_wind.fiche37.pdf (Accessed August 2011).
414. Weinzettel, J., Reenaas, M., Solli, C., and Hertwich, E.G. (2009), "Life cycle assessment of a floating offshore wind turbine," Elsevier Renewable Energy, 34, pp 742-747.
415. Windustry (2010), "How much do wind turbines cost?" Windustry and Great Plains Windustry Project, Minneapolis, MN, USA. www.windustry.org/howmuch-do-wind-turbines-cost (Accessed August 2010).
416. Davies, J., Wright, M., Monetti, K., and Van Den Berg, D. (2007), "Hydroelectric Section of the Energy Task Force," www.investfairbanks.com/documents/Hydronarrative12-07.pdf (Accessed September 2010).
417. Energy Saving Trust (2003), "Small scale hydroelectricity," www.savenergy.org (Accessed September 2010).
418. IEA (2000), "Hydropower and the world's energy future," www.ieahydro.org/reports/ Hydrofut.pdf (Accessed September 2010).
419. Ribeiro, F., de M., and da Silva, G.A. (2010), "Life cycle inventory for hydroelectric generation: a Brazilian case study," Journal of Cleaner Production, 18 (2010) 44-54.
420. Sims, R.E.H. (2008), "Hydropower, geothermal, and ocean energy," MRS Bulletin, 33: 4, April 2008.
421. US Department of the Interior, Bureau of Reclamation (2008), "Hoover Dam, frequently asked questions and answers, The Dam," www.usbr.gov/lc/hooverdam/faqs/damfaqs.html (Accessed August 2010).
422. Vattenfall, A.B. (2008), "Certified environmental product declaration EPD of electricity from Vattenfall's Nordic hydropower," www.vattenfall.com (Accessed August 2010).
423. Anderson, C. (2003), "Pelamis WEC-Main body structural design and materials selection," DTI, http://webarchive.nationalarchives.gov.uk/tna/1/http:/www.dti.gov.uk/renewables/publications/pdfs/v0600197.pdf/ (Accessed September 2010).
424. Boronowski, S., Wild, P., Rowe, R., and van Kooten, G.C. (2010), "Integration of wave power in Haida Gwaii," Renewable Energy, 35 pp 2415-2421.
425. Carcas, M., "The Pelamis Wave Energy Converter-A phased array of heave1 surge point absorbers," Ocean Power Delivery Ltd., http://hydropower.inel.gov/hydrokinetic_wave/pdfs/day1/09_heavesurge_wave_devices.pdf (Accessed December 2010).
426. Energy Action Devon (2010), "Wave Power," Devon Association for Renewable Energy, www.devondare.org/wavepower (Accessed September 2010).
427. Henry, A., Doherty, K., Cameron, L., Whittaker, T., and Doherty, R. (2010), "Advances in the design of the Oyster wave energy converter," www.aquamarinepower.com/pub (Accessed September 2010).
428. Parker, R.P.M., Harrison, G.P., and Chick, J.P. (2007), "Energy and carbon audit of an offshore wave energy converter," School of Engineering and Electronics, University of Edinburgh, Edinburgh, UK.
429. Peak Energy (2010), "Wave power potential in Australia," http://peakenergy.blogspot.com/2010/09/wave-power-potential-in-australia.html (Accessed September 2010).
430. Pelamis Wave Power (2010), "Environmental characteristics," www.pelamiswave .com (Accessed September 2010).
431. Wave Dragon (2005), "Wave Dragon," www.wavedragon.net (Accessed September 2010).
432. Douglas, C.A., Harrison, G.P., and Chick, J.P. (2008), "Life cycle assessment of the Seagen marine current turbine," Proc. IMechE Part M: J. Engineering for the Maritime Environment 222, pp 1-12.
433. Harvey, L.D.D. (2010), Energy and the New Reality 2, Carbon Free Energy Supply, Earthscan Ltd., London, UK.
434. Miller, V.B., Landis, A.F., and Schaefer, L.A. (2010), "A benchmark for life cycle air emissions and life cycle impact assessment of hydrokinetic energy extraction using life cycle assessment," Renewable Energy, 35, pp 1-7.
435. Roberts, F. (1982), "Energy accounting of river severn tidal power schemes," Applied Energy, 11 pp 197-213.
436. Frick, S., Kaltschmitt, M., and Schroder, G. (2010), "Life cycle assessment of geothermal binary power plants using enhanced low-temperature reservoirs," Energy, 35 pp 2281-2294.
437. Geothermal Energy Association (2010), "Geothermal basics-power plant costs," www.geo-energy.org/geo_basics_plant_cost.aspx (Accessed September 2010).
438. Huttrer, G.W. (2001), "The status of world geothermal power generation 1995-2000," Geothermics, 30 pp. 1-27.
439. Kaplan, S. (2008), "Power plants: characteristics and costs," CRS Report for Congress, www.fas.org/sgp/crs/misc/RL34746.pdf (Accessed September 2010).
440. Lawrence, S. (2008), "Geothermal energy," Leeds School of Business, University of Colorado, www.scribd.com/doc/6565045/Geothermal-Energy (Accessed September 2010).
441. MIT (2006), "The future of geothermal energy," Geothermal Program, Idaho National Laboratory, http://geothermal.inel.gov/publications/future_of_geothermal_energy.pdf (Accessed September 2010).
442. Saner, D., Juraske, R., Kubert, M., Blum, P., Hellweg, S., and Bayer, P. (2010), "Is it only CO2 that matters? A life cycle perspective on shallow geothermal systems," Renewable and Sustainable Energy Reviews, 14, pp 1798-1815.
443. US Department of Energy (2005), "Buried treasure: the environmental, economic and employment benefits of geothermal energy," NREL, Energy Efficiency and Renewable Energy, www.nrel.gov/docs/fy05osti/35939.pdf (Accessed August 2010).
444. Usui, C. and Aikawa, K. (1970), "Engineering and design features of the otake geothermal power plant," Geothermics, O. N. Symposium on the Development and Utilization of Geothermal Resources, Pisa, Italy), Vol. 2, Part 2.
445. Asgard Biomass (2009), "Biomass fuels," www.asgard-biomass.co.uk/biomass_boiler_fuels.php (Accessed September 2010).
446. Bauer, C. (2008), "Life cycle assessment of fossil and biomass power generation chains," Paul Scherrer Institut, http://gabe.web.psi.ch/pdfs/PSI_Report/PSIBericht%2008-05.pdf (Accessed September 2010).
447. Ellington, R.T., Meo, M., and El-Sayed, D.A. (1993), "The net greenhouse warming forcing of methanol produced from biomass," Biomass and Bioenergy, Vol. 4: 6, pp 40-48.
448. HM Government (2010), "2050 pathways analysis," www.decc.gov.uk/assets/decc/What%20we%20do/A%20low%20carbon%20UK/2050/216-2050-pathwaysanalysis-report.pdf (Accessed September 2010).
449. Kim, S. and Dale, B.E. (2008), "Cumulative energy and global warming impact from the production of biomass for biobased products," Research and Analysis http://arrahman29.files.wordpress.com/2008/02/lca-use.pdf (Accessed September 2010).
450. Mann, M.K. and Spath, P.L. (1997), "Life cycle assessment of a biomass gasification combined-cycle power system," National Renewable Energy Laboratory, www.nrel.gov/docs/legosti/fy98/23076.pdf (Accessed September 2010).
451. Pollack, A. (2010), "His corporate strategy: the scientific method," The New York Times, www.nytimes.com/2010/09/05/business/05venter.html?_r51&src5me&ref5general (Accessed September 2010).
452. World Bank (2010), "Commodity prices," http://siteresources.worldbank.org/INTDAILYPROSPECTS/Resources/Pnk_0910.pdf (Accessed September 2010).
453. Dasgupta, P. (2010), "Nature's role in sustaining economic development," Phil. Trans. Roy. Soc. B, 365, pp 5-11.
454. Flannery, T. (2010), Here on earth, The Text Publishing Company, Victoria, Australia. ISBN 978-1-92165-666-8.
455. Hamilton, C. (2010), Requiem for a species: why we resist the truth about climate change, Allen and Unwin, NSW, Australia. ISBN 978-1-74237-210-5.
456. Hardin, G. (1968), "The tragedy of the commons," Science, 162, pp 1243-1248.
457. Lawson, N. (2008), An appeal to reason-a cool look at global warming, Duckworth Overlook, New York, NY, USA. ISBN 978-1-5902-0084-1.
458. Lomberg, B. (2001), The skeptical environmentalist-measuring the real state of the world, Cambridge University Press, Cambridge, UK. ISBN 0-521-01068-3.
459. Lomberg, B. editor (2010), Smart solutions to climate change: comparing costs and benefits, Cambridge University Press, Cambridge, UK. ISBN 978-0-52113-856-7.
460. Lovelock, J. (2009) The vanishing face of Gaia, Penguin Books, Ltd. London, UK. ISBN 978-0-141-03925-1.
461. MacKay, D.J.C.(2008), Sustainable energy-without the hot air, UIT Press, Cambridge, UK and www.withouthotair.com/. ISBN 978-0-9544529-3-3.
462. Malthus, T. R. (1798), "An essay on the principle of population," London, Printed for Johnson, St. Paul's Church-yard. www.ac.wwu.edu/Bstephan/malthus/malthus.
463. Meadows D.H., Meadows D.L., Randers J, and Behrens W.W. (1972), The limits to growth, Universe Books, New York, USA.
464. Meadows, D.H., Meadows, D.L., and Randers, J. (1992), Beyond the Limits, Earthscan, London, UK. ISSN 0896-0615.
465. Nielsen, R. (2005), The little green handbook, Scribe Publications Pty Ltd, Carlton North, Victoria, Australia. ISBN 1-9207-6930-7.
466. Plimer, I. (2009), Heaven and earth-global warming: the missing science, Connor Publishing, Ballam, Victoria, Australia. ISBN 978-1-92142-114-3.
467. Schmidt-Bleek, F. (1997), How much environment does the human being need-factor 10-the measure for an ecological economy, Deutscher Taschenbuchverlag, Munich, Germany. ISBN 3-936279-00-4.
468. von Weizsäcker, E., Lovins, A.B., and Lovins, L.H. (1997), Factor four: doubling wealth, halving resource use, Earthscan Publications, London, UK. ISBN 1-85383-406-8; ISBN-13: 978-1-85383406-6.
469. Walker, G. and King, D. (2008), The hot topic-how to tackle global warming and still keep the lights on, Bloomsbury Publishing, London, UK. ISBN 9780-7475-9395-9.