Effects of surface modification on thermal cycling lifetime of thermal barrier coatings with HVOF NiCrAlY bond coat

Progress in Natural Science: Materials International

Volumn 22, Issue 3, 2012, Pages 237-243

  Ni, Liyong ^a   Zhou, Chungen ^a  

^a BEIHANG UNIVERSITY   (China)

Author keywords

HVOF; NiCrAlY; Thermal barrier coatings; Thermally grown oxide (TGO)

Indexed keywords

ALUMINA; ALUMINUM ALLOYS; ALUMINUM OXIDE; BLASTING; CHROMIUM ALLOYS; NICKEL ALLOYS; SHOT PEENING; SPRAYED COATINGS; THERMAL BARRIER COATINGS; THERMAL CYCLING;

BOND COATS; HIGH VELOCITY OXYGEN FUELS; NICRALY BOND COATS; SHOT-PEENING; SURFACE-MODIFICATION; THERMAL-CYCLING; THERMALLY GROWN OXIDE; THERMALLY-GROWN OXIDE; TOP-COATS;

SURFACE TREATMENT;

EID: 84901604337     PISSN: 10020071     EISSN: 17455391     Source Type: Journal    
DOI: 10.1016/j.pnsc.2012.04.007     Document Type: Article

References (32)

1. Padture, N P, Gell, M, Jordan, EH., Thermal barrier coatings for gas-turbine engine applications [J]. Science 296 (2002), 280–284.
2. Evans, A G, Mumm, D R, Hutchinson, J W, et al. Mechanisms controlling the durability of thermal barrier coatings [J]. Progress in Materials Science 46 (2001), 505–553.
3. Richer, P, Yandouzi, M, Beauvais, L, et al. Oxidation behaviour of CoNiCrAlY bond coats produced by plasma, HVOF and cold gas dynamic spraying [J]. Surface and Coatings Technology 204 (2010), 3962–3974.
4. SONG, M, MA, Y, GONG, SK., Analysis of residual stress distribution along interface asperity of thermal barrier coating system on macro curved surface [J]. Progress in Natural Science: Materials International 21:3 (2011), 262–267.
5. Shillington, E A G, Clarke, DR., Spalling failure of a thermal barrier coating associated with aluminum depletion in the bond-coat [J]. Acta Materialia 47:4 (1999), 1297–1305.
6. Rabiei, A, Evans, AG., Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings [J]. Acta Materialia 48:15 (2000), 3963–3976.
7. Schlichting, K W, Padture, N P, Jordan, E H, et al. Failure modes in plasma-sprayed thermal barrier coatings [J]. Materials Science and Engineering: A 342:1-2 (2003), 120–130.
8. Zhang, D B, Gong, S K, Xu, H B, et al. Effect of bond coat surface roughness on the thermal cyclic behavior of thermal barrier coatings [J]. Surface and Coatings Technology, 2006, 649–653 201, 2006, 649–653.
9. Che, C, Wu, G Q, Qi, H Y, et al. Effect of bond coat surface roughness on oxidation behavior of air plasma sprayed thermal barrier coatings [J]. Surface Engineering 24:4 (2008), 276–279.
10. Matsumoto, M, Hayakawa, K, Kitaoka, S, et al. The effect of preoxidation atmosphere on oxidation behavior and thermal cycle life of thermal barrier coatings [J]. Materials Science and Engineering: A 441 (2006), 119–125.
11. Ni, L Y, Wu, Z L, Zhou, CG., Effects of surface modification on isothermal oxidation behavior of HVOF-sprayed NiCrAlY coatings [J]. Progress in Natural Science: Materials International 21:2 (2011), 173–179.
12. Zhou, Z H, Gong, S K, Li, H F, et al. Effects of shot peening process on thermal cycling lifetime of TBCs prepared by EB-PVD [J]. Chinese Journal of Aeronautics 20 (2007), 145–147.
13. 4 using impedance spectroscopy [J]. Corrosion Science 53 (2011), 1369–1374.
14. Zhou, C G, Song, Y X, Wang, CL., Cyclic-oxidation behavior of thermal-barrier coatings exposed to NaCl vapor [J]. Oxidation of metals 69 (2008), 119–130.
15. Puetz, P, Huang, X, Lima, R S, et al. Characterization of transient oxide formation on CoNiCrAlY after heat treatment in vacuum and air [J]. Surface and Coatings Technology 205 (2010), 647–657.
16. Fauchais, P, Vardelle, M, Vardelle, A, et al. Plasma spray: study of the coating generation [J]. Ceramics International 22:4 (1996), 295–303.
17. Pasandideh-Fard, M, Pershin, V, Chandra, S, et al. Splat shapes in a thermal spray coating process: simulations and experiments [J]. Journal of Thermal Spray Technology 11:2 (2002), 206–217.
18. Gil, A, Shemet, V, Vassen, R, et al. Effect of surface condition on the oxidation behaviour of MCrAlY coatings [J]. Surface and Coatings Technology 201:7 (2006), 3824–3828.
19. He, J H, Schoenung, JM., Nanostructured coatings [J]. Materials Science and Engineering: A 336:1-2 (2002), 274–319.
20. Suryanarayana, C, Norton, HG., X-ray diffraction: a practical approach[M], 1998, Plenum Press, New York, NY 207-218.
21. Tang, F, Ajdelsztajn, L, Kim, G E, et al. Effects of surface oxidation during HVOF processing on the primary stage oxidation of a CoNiCrAlY coating [J]. Surface and Coatings Technology 185:2-3 (2004), 228–233.
22. Saeidi, S, Voisey, K T, McCartney, DG., The effect of heat treatment on the oxidation behavior of HVOF and VPS CoNiCrAlY coatings [J]. Journal of Thermal Spray Technology 18:2 (2009), 209–216.
23. Tang, F, Ajdelsztajn, L, Schoenung, JM., Characterization of oxide scales formed on HVOF NiCrAlY coatings with various oxygen contents introduced during thermal spraying [J]. Scripta Materialia 51:1 (2004), 25–29.
24. Taylor, R, Brandon, J R, Morrell, P., Microstructure, composition and property relationships of plasma-sprayed thermal barrier coatings [J]. Surface and Coatings Technology 50:2 (1992), 141–149.
25. Jung, I H, Moon, J S, Song, K C, et al. A study of the microstructure of yttria-stabilized zirconia deposited by inductively coupled plasma spraying [J]. Journal of Thermal Spray Technology 9:4 (2000), 463–477.
26. Yamano, H, Tani, K, Harada, Y, et al. Oxidation control with chromate pretreatment of MCrAlY unmelted particle and bond coat in thermal barrier systems [J]. Journal of Thermal Spray Technology 17:2 (2008), 275–283.
27. Tang, F, Ajdelsztajn, L, Schoenung, JM., Influence of cryomilling on the morphology and composition of the oxide scales formed on HVOF CoNiCrAlY coatings [J]. Oxidation of metals 61:3-4 (2004), 219–238.
28. Ni, L Y, Liu, C, Huang, H, et al. Thermal cycling behavior of thermal barrier coatings with HVOF NiCrAlY bond coat [J]. Journal of Thermal Spray Technology 20:5 (2011), 1113–1118.
29. Zhou, C G, Yu, J S, Gong, S K, et al. Influence of water vapor on the high temperature oxidation behavior of thermal barrier coatings [J]. Materials Science and Engineering: A 348:1-2 (2003), 327–332.
30. Li, Y, Li, C J, Yang, G J, et al. Thermal fatigue behavior of thermal barrier coatings with the MCrAlY bond coats by cold spraying and low-pressure plasma spraying [J]. Surface and Coatings Technology 205:7 (2010), 223–2225.
31. Brandl, W, Marginean, G, Maghet, D, et al. Effects of specimen treatment and surface preparation on the isothermal oxidation behaviour of the HVOF-sprayed MCrAlY coatings [J]. Surface and Coatings Technology 188-189 (2004), 20–26.
32. Li, Y, Li, C J, Zhang, Q, et al. Influence of TGO composition on the thermal shock lifetime of thermal barrier coatings with cold-sprayed MCrAlY bond coat [J]. Journal of Thermal Spray Technology 19:1-2 (2010), 168–177.