High-frequency induction machine modeling for common mode current and bearing voltage calculation

IEEE Transactions on Industry Applications

Volumn 50, Issue 3, 2014, Pages 1780-1790

  Magdun, Oliver ^a   Binder, Andreas ^a  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

Author keywords

frequency domain analysis; frequency response; induction machines; modeling; parameter estimation; stimulation; time domain analysis; Variable speed drivers

Indexed keywords

FREQUENCY DOMAIN ANALYSIS; FREQUENCY RESPONSE; MODELS; PARAMETER ESTIMATION; TIME DOMAIN ANALYSIS;

COMMON MODE CURRENTS; DIFFERENTIAL MODE; GROUND CURRENTS; HIGH-FREQUENCY INDUCTIONS; HIGH-FREQUENCY MACHINES; INDUCTION MACHINES; STIMULATION; VARIABLE SPEED DRIVER;

ASYNCHRONOUS MACHINERY;

EID: 84901354972     PISSN: 00939994     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIA.2013.2284301     Document Type: Conference Paper

References (34)

1. D. Busse, J. Erdman, R. Kerkman, D. Schlegel, and G. Skibinski, "System electrical parameters and their influence effect on bearing currents," IEEE Trans. Ind. Appl., vol. 33, no. 2, pp. 21-32, Mar./Apr. 1997.
2. A. Muetze, "Thousands of hits: on inverter-induced bearing currents, related work, and the literature," Elektrotech. Informat., vol. 28, no. 11/12, pp. 382-388, Dec. 2011.
3. A. Binder and A. Muetze, "Scaling effects of inverter-induced bearing currents in ac machines," IEEE Trans. Ind. Appl., vol. 44, no. 3, pp. 769-776, May/Jun. 2008. (Pubitemid 351796123)
4. H. De Gersem and A. Muetze, "Finite-element supported transmissionline models for calculating high-frequency effects in machine windings," IEEE Trans. Magn., vol. 48, no. 2, pp. 787-790, Feb. 2012.
5. H. De Gersem, O. Henze, T. Weiland, and A. Binder, "Simulation of wave propagation effects in machine windings," Compel, Int. J. Comput. Math. Electr. Electron. Eng., vol. 29, no. 1, pp. 23-38, 2010.
6. A. Boglietti and E. Carpaneto, "An accurate induction motor highfrequency model for electromagnetic compatibility analysis," Elect. Power Compon. Syst., vol. 29, no. 3, pp. 191-209, Mar. 2001.
7. A. F. Moreira, T. A. Lipo, G. Venkataramanan, and S. Bernet, "High frequency modeling for cable and induction motor overvoltage studies in long cable drives," IEEE Trans. Ind. Appl., vol. 38, no. 5, pp. 1297-2002, Sep./Oct. 2002.
8. D. Rendusara and P. Enjeti, "New inverter output filter configuration reduces CM and DMdv/dt at the motor terminals in PWM drive systems," in Proc. IEEE PESC, St. Louis, MO, USA, Jun. 22-27, 1997, vol. 2, pp. 1269-1275.
9. O. Magdun, A. Binder, C. Purcarea, A. Rocks, and B. Funieru, "Modeling of asymmetrical cables for an accurate calculation of common mode ground currents," in Proc. IEEE-ECCE, San Jose, CA, USA, Sep. 20-24, 2009, pp. 1075-1082.
10. N. Idir, Y. Weens, M. Moreau, and J. J. Franchaud, "High-frequency behavior models of ac motors," IEEE Trans. Magn., vol. 45, no. 1, pp. 133-138, Jan. 2009.
11. G. Grandi, D. Casadei, and U. Reggiani, "Common-and differentialmode HF current components in ac motors supplied by voltage source inverters," IEEE Trans. Power Electr., vol. 19, no. 1, pp. 16-24, Jan. 2004.
12. A. Boglietti, A. Cavagnino, and M. Lazari, "Experimental high-frequency parameter identification of ac electrical motors," IEEE Trans. Ind. Appl., vol. 43, no. 1, pp. 23-29, Jan./Feb. 2007. (Pubitemid 46431372)
13. G. Grandi, D. Casadei, and A. Massarini, "High frequency lumped parameter model for ac motor windings," in Proc. EPE Conf., Trondheim, Norway, Sep. 1997, vol. 2, pp. 578-583.
14. B. Mirafzal, G. Skibinski, R. Tallam, D. Schlegel, and R. Lukaszewski, "Universal induction motor model with low-to-high frequency-response characteristics," IEEE Trans. Ind. Appl., vol. 43, no. 5, pp. 1223-1246, Sep./Oct. 2007.
15. B. Mirafzal, G. Skibinski, and R. Tallam, "A failure mode for PWM inverter-fed ac motors due to the antiresonance phenomenon," IEEE Trans. Ind. Appl., vol. 45, no. 5, pp. 1697-1705, Sep./Oct. 2009.
16. B. Mirafzal, G. Skibinski, and R. Tallam, "Determination of parameters in the universal induction motor model," IEEE Trans. Ind. Appl., vol. 45, no. 1, pp. 142-151, Jan./Feb. 2009.
17. M. Schinkel, S. Weber, S. Guttowski, W. John, and H. Reichl, "Efficient HF modeling and model parameterization of induction machines for time and frequency domain simulations," in Proc. APEC, Dallas, TX, USA, Mar. 19-23, 2006, pp. 1181-1186. (Pubitemid 44523553)
18. L. Wang, C. N. M. Ho, F. Canales, and J. Jatskevitch, "Highfrequency cable and motor modeling of long-cable-fed induction motor drive systems," in Proc. IEEE-ECCE, Atlanta, GA, USA, Sep. 12-16, 2010, pp. 846-852.
19. L. Ran, S. Gokani, J. Clare, K. J. Bradley, and C. Christopoulos, "Conducted electromagnetic emissions in induction motor drive systems, Part II: Frequency domain models," IEEE Trans. Power Appl., vol. 13, no. 4, pp. 768-776, Jul. 1998. (Pubitemid 128747799)
20. R. Naik, T. Nondahl, M. Melfi, R. Schiferl, and J. Wang, "Circuit model for shaft voltage prediction in induction motors fed by PWMbased ac drives," IEEE Trans. Ind. Appl., vol. 39, no. 5, pp. 1294-1299, Sep./Oct. 2003.
21. M. Cacciato, A. Consoli, L. Finocchiaro, and A. Testa, "High frequency modeling of bearing currents and shaft voltage on electrical motors," in Proc. ICEMS, Nanjing, China, Sep. 27-29, 2005, vol. 3, pp. 2065-2070.
22. B. Revol, J. Roudet, J. L. Schanen, and P. Loizelet, "EMI Study of threephase inverter-fed motor drives," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 223-231, Jan./Feb. 2011.
23. U. T. Shami and H. Akagi, "Identification and discussion of the origin of a shaft end-to-end voltage in an inverter-driven motor," IEEE Trans. Power Appl., vol. 25, no. 6, pp. 1615-1625, Jun. 2010.
24. T. Kovanen, L. Soderlund, and L. Kettunen, "Mechanism behind highfrequency circulating bearing currents in view of motor structures," IET Sci. Meas. Technol., vol. 2, no. 4, pp. 233-243, Jul. 2008. (Pubitemid 351590763)
25. P. Maeki-Ontto, H. Kinnunen, and J. Luomi, "Three-phase model for the simulation of common-mode phenomena and shaft voltages in ac motor drive systems," in Proc. IEEE-IEMDC, San Antonio, USA, May 13-15, 2005, pp. 437-443. (Pubitemid 44461344)
26. S. Ogasawara and H. Akagi, "Modeling and damping of high frequency leakage currents in PWM inverter-fed ac motor drive systems," IEEE Trans. Ind. Appl., vol. 32, no. 5, pp. 1105-1114, Sep./Oct. 1996. (Pubitemid 126777251)
27. O. Magdun, Y. Gemeinder, A. Binder, and K. Reis, "Calculation of bearing and common-mode voltages for the prediction of bearing failures caused by EDM currents," in Proc. IEEE-SDEMPED Conf., Bologna, Italy, Sep. 5-8, 2011, pp. 462-467.
28. A. Muetze and A. Binder, "Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems," IEEE Trans. Ind. Appl., vol. 43, no. 3, pp. 665-672, May/Jun. 2007. (Pubitemid 46864801)
29. F. Zare, "Practical approach to model electric motors for electromagnetic interference and shaft voltage analysis," IET Electr. Power Appl., vol. 4, no. 9, pp. 727-738, Nov. 2010.
30. O. Magdun, Y. Gemeinder, and A. Binder, "Prevention of harmful EDM currents in inverter-fed ac machines by use of electrostatic shields in the stator winding overhang," in Proc. IEEE IECON, Glendale, AZ, USA, Nov. 7-10, 2010, pp. 962-967.
31. O. Magdun and A. Binder, "The high-frequency induction machine parameters and their influence on the CM stator ground current," in Proc. ICEM, Marseille, France, Sep. 2-5, 2012, pp. 505-511.
32. C. Purcarea and P. Mutschler, "Investigation of EMI reduction techniques using time domain simulation of drives," in Proc. IEEE IECON, Porto, Portugal, Nov. 3-5, 2009, pp. 1174-1179.
33. D. M. Postariu, C. Chillet, J. Roudet, B. Boualem, and R. Periot, "Experimental validation of the circulating bearing-currents mathematical theory in the 20 MHz frequency range," in Proc. Electromotion-EPE Chapt. Joint Symp., Lille, France, Jul. 1-3, 2009, pp. 1-4, CD ROM.
34. A. Muetze and A. Binder, "Calculation of Influence of Insulated bearings and insulated inner bearing seats on circulating bearing currents in machines of inverter-based drive systems," IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 965-972, Jul./Aug. 2006. (Pubitemid 44111474)